Amplifi er Built-in
Compact Photoelectric Sensor
CX-400 SERIES Ver.2
World Standard
Upgraded to Increase Usability
Achieving low power consumption and high noise-resistance
UL RecognitionConforming to
EMC Directive
Certifi ed
(Some models only)
ideas for life
2010.11 panasonic-electric-works.net/sunx
18/07/2011
1
The CX-400 series incorporates an acrylic that
strongly resists oils and coolant fl uids, and a
polycarbonate indicator cover that strongly
resists ethanol .The CX-400 series is also
characterized by strong resistance to noise,
reciprocal interference and cold environments.
The lens material is made of a
strong acrylic that resists the
harmful effects of coolants.
These sensors can be used
with confi dence even around
metal processing machine that
disperse oil mists.
Incorporates a polycarbonate
indicator cover that strongly
resists ethanol. This makes
it compatible with food
processors that spray ethanol-
based cleaning fl uids.
The world standard CX-400 series
Sensors that are environmentally and
user friendly.
The total lineup of 148 models covers through the inclusion of a newly developed custom
integrated circuit. This CX-400 series upgrade achieves a significantly higher reliability in the same
package as the older model.
Demonstrating stable detection,
even in harsh environments
Resistant to oil and coolant liquids CX-41/42/49 Strongly ethanol resistant CX-44/48
Strong
Includes an analog CMOS
processor ASIC
Providing stable detection with low power consumption
Test Oil JIS Standard Product Name
Lubricant - Velocity Oil No. 3
Water-insoluble
cutting oil
2-5 Daphnecut AS-30D
2-11 Yushiron Oil No.2ac (Note)
Water-soluble
cutting oil
W1-1 Yushiron Lubic HWC68 (Note)
W2-1 Yushiroken S50N (Note)
1,000 hours; Immersion (depth 0 m); Insulation resistance 20 M/250 V
Note: Yushiron and Yushiroken are registered trademarks of
Yushiro Chemical Industry Co., Ltd.
18/07/2011
2
Contributing to reduced carbon dioxide emissions
Electricity consumed by the CX-400 series has
been reduced on average 10.5 mA. Calculating
8 hours/day, 260 days (operating 5 days/week)
for a total of 2,080 hours/year leads to:
The CX-400
contributes Approx. 84.6 t annually in carbon
dioxide reductions to the world
The CX-400 series have three different cable
length types and uses very simple packaging
to reduce waste. The bag is made of
polyethylene and does not emit toxic gasses.
Thanks to its unique optics and specialized
design, the CX-400’s electronic circuits allows
for consistent sensing of minute 0.4 mm
0.016 in (the thickness of a business card)
differences or 10 m 0.394 mil ultra-thin fi lm.
Thoroughly eliminating unnecessary waste,
Reducing many environmental burdens
High performance
For many applications
Save
High
Performance
Stronger noise resistance
Stronger inverter countermeasures
The CX-400 has a high noise resistance then its previons
model. By incorporating an inverter countermeasure
circuit that appropriately shifts with peak wavelength,
the sensor now resists high-frequency noise from
high-voltage inverter motors and inverter lights more
effectively.
Stronger output short-circuit resistance
Stronger inverse wiring connection protection
Strengthening the output circuit inverse polarity protection
prevents sensor damage caused by mistaken output or
power supply wiring.
Previous CX-482
25 mA
Upgrade for up to
60% reduction
New CX-482
10 mA
Reducing environmental burdens further
Up to 60% less power consumption
The CX-400 series achieves reductions in power consumption
of up to 60%, averaging 44% reduction when upgrading due to
its unique design. These sensors reduce carbon emissions and
contribute to environmental friendliness.
1
Upgrade
2
Upgrade
3
Upgrade
18/07/2011
3
Thru-beam type
Retrorefl ective type
Strong in dust and dirt
CX-412/413
The infrared light source is strong in dust
and dirt compared to the red beam type.
Even the thru-beam type is
strong at mutual interference
CX-411
Two CX-411 sensors, with their red
beam light source, can be installed close
together by inserting an interference
prevention filter.
Interference prevention
filter (Optional)
Strong infrared beam
CX-412/413
Remarkable penetrating ability enables
applications such as package content
detection come into practice. (Note)
Note: When sensing utilizing penetrating power, make
sure to verify using the actual sensor.
Long sensing range of 5 m 16.404 ft
CX-493
A long 5 m 16.404 ft
sensing range is
possible with the
red LED type that
is easy to align with
the beam axis. The
sensors can be used
for wide automatic
door shutters.
Retrorefl ective type with polarizing fi lters
CX-491
Built-in polarizing filters ensure stable sensing even
on a mirror surface object.
Strong against extraneous light and noise
CX-491
Hardly affected by extraneous lights or noises, these
sensors provide stable sensing.
Two sensors can be mounted close together
All models
The interference prevention function lets two
sensors of any type to be mounted close together
precisely.
CX-411: 10 m 32.808 ft
CX-412: 15 m 49.213 ft
CX-413: 30 m 98.425 ft
CX-493: 5 m 16.404 ft
CX-491: 3 m 9.843 ft
CX-482: 2 m 6.562 ft
CX-483: 1 m 3.281 ft
CX-481: 0.5 m 1.640 ft
Detecting box collapsing within the rail
of stacker crane
Synchronizing sensor for image
processing systems
Applications
CX-411CX-411
For transparent object sensing
CX-413
18/07/2011
4
Introducing transparent object sensing type sensor
CX-48
Our unique optical system and transparent object sensing
circuit provide stable sensing of thinner transparent objects
than the conventional models.
Twice the
sensing
range!
Transparent objects detectable with CX-48 (Typical examples)
Sensing object Sensing object size (mm in)
Glass sheet 50 1.969 t=0.7 t=0.028
Cylindrical glass ø50 ø1.969  =50  =1.969 t=1.3 t=0.051
Acrylic board 50 1.969 t=1.0 t=0.039
Styrol (Floppy case) 50 1.969 t=0.9 t=0.035
Food wrapping film 50 1.969 t=10 m t=0.394 mil
Cigarette case film 50 1.969 t=20 m t=0.787 mil
Vinyl bag 50 1.969 t=30 m t=1.181 mil
Pet bottle (500m) ø66 ø2.598
Reflector setting range CX-481: 300 to 500 mm 11.811 to 19.685 in
CX-482: 1 to 2 m 3.281 to 6.562 ft
CX-483: 500 to 1,000 mm 19.685 to 39.370 in
[with the RF-230 reflector at the optimum condition (Note)]
Each object should pass across the beam at the center between the sensor and the reflector.
 : Length of cylindrical glasses
t : Thickness of sensing object
Note:
The optimum condition is defined as the condition in which the sensitivity level
is set such that the stability indicator just lights up when the object is absent.
Diffuse refl ective type
CX-422: 800 mm 31.496 in
CX-421: 300 mm 11.811 in
CX-424: 100 mm 3.937 in
CX-423: 70 to 300 mm
2.756 to 11.811 in
Applications
Applications
CX-411CX-411
CX-491
CX-491
Detecting pins in the case
Passage confirmation on substrate
conveyor equipment
Detecting glossy electric
appliances
Passage confi rmation of
object on a conveyor belt
Detecting plastic bottles
stacked on pallets
Detecting transparent fi lm
CX-423
Spot diameter
ø2.2 mm
0.087 in approx.
100 mm
3.937 in
approx.
100 mm
3.937 in
approx.
CX-424
Narrow-view type
CX-481
CX-482
Great visibility approx. ø2 mm
ø0.079 in high luminance spot beam
(at setting distance 100 mm 3.937 in)
CX-423
Beam axis alignment made easy with a high luminance spot beam
CX-423
These sensors have a high luminance
red LED spot beam which provides bright
visibility enabling the sensing position to
be checked at a glance.
Because it achieved small beam spot
approx. ø2 mm ø0.079 in at setting
distance 100 mm 3.937 in, approx. ø5 mm
ø0.197 in at setting distance 200 mm
7.874 in, even the minutest object can be
accurately detected.
Reduction of volume adjustment labor
All models
Because these sensors possess many
variations depending on the sensing
range, they enable you to make optimal
volume adjustment easily.
18/07/2011
5
Hardly affected by colors
Both black and white objects can be
sensed at the same distances. No
adjuster control is needed, even when
products of different colors are moving
along the production line.
30 % higher
sensing
capability
The difference in sensing range 1%
or less between non-glossy white
paper with a setting distance of 50 mm
1.969 in and non-glossy gray paper with
a brightness level of 5.
High precision type
CX-441/443
Can sense height differences as
small as 0.4 mm 0.016 in, with
hysteresis of 2 % or less
An advanced optical system provides
sensing performance that is approx. 2.5
times than conventional models. Even
ultra-small differences of 0.4 mm 0.016 in
can be detected accurately.
Height differences
of as little as 0.4 mm
0.016 in can be
detected at a setting
distance of 20 mm
0.787 in
0.4 mm
0.016 in
2.5 times
the sensing
capability!
Select from 2 spot diameters as
per application
Within the choice of 50 mm 1.969 in
sensing range sensors, we offer small
spot type of approx. ø2 mm ø0.079 in
optimal for detecting minute objects
and large spot type of approx. ø6.5 mm
ø0.256 in capable of sensing objects
covered with holes and grooves.
CX-441
Spot diameter:
ø
2 mm
ø0.079 in
approx.
[Positioning]
Detects minute holes.
CX-443
Spot diameter: ø6.5 mm
ø0.256 in
approx.
[ ]
Detection of presence /
absence of objects
Ignores minute holes and
accurately detects objects.
1.5 times longer than before
300 mm 11.811 in
100 mm
3.937 in 50 mm 1.969 in
Spot diameter ø2 mm
ø0.079 in approx. 50 mm 1.969 in
Spot diameter ø6.5 mm
ø0.256 in approx.
CX-442
CX-441
CX-444
CX-443
The bright spot makes beam axis alignment easy
All models
These sensors have a high luminance red spot that provides
bright visibility. The sensing position can be checked at a glance.
Because the CX-441 sensor has a small spot beam, at approx.
ø2 mm ø0.079 in, even the minutest object can be accurately
detected.
Great visibility approx.
ø2 mm ø0.079 in high
luminance spot
CX-441
Can be used for sensing minute differences
All models
Equipped with a 5-turn adjuster so that even challenging range
settings can be handled with ease.
Adjustable range refl ective type
18/07/2011
6
BGS / FGS functions make even the most challenging settings possible!
The BGS function is best suited for the following case The FGS function is best suited for the following case
Background not present
When object and background are separated
Background present
When object and background are close together
When the object is glossy or uneven
Not affected if the background
color changes or someone
passes behind the conveyor.
Unaffected by gloss, color
or uneven surfaces when
sensing objects present on
a conveyor belt.
Caution: Please use the FGS function together with a conveyor or other background
unit.
FGS (Foreground suppression) function
The sensor judges that an object is present when no light is
received at position B of the light-receiving element (2-segment
element). Accordingly, even objects that are glossy can be
sensed. This is useful if the object and background are close
together, or if the object being sensed is glossy.
Conveyor Conveyor Conveyor
Light received at
position A
Light is not received
at position B, so an
object is judged to
be present
Light received at
position B
A
Lens
Emitting
element
Object present
For glossy object
Object absent
ON ONOFF
B
OFF in this condition only
ON in all other conditions
Setting
distance
A conveyor or other
back-ground must
be present
( )
BGS (Background suppression) function
The sensor judges that an object is present when light is received
at position A of the light-receiving element (2-segment element).
This is useful if the object and background are far apart. The
distance adjustment method is the same as the conventional
adjustment method for adjustable range reflective type sensors.
Setting distance
ObjectMoving object
in the back
ONOFF
Element B
Element A
Background
Light received at
element B, or
light not received
( )
( )
Light received
at element A
Detects minute objects unaffected by glossy
background objects. Uses FGS function.
Stable sensing even for thin objects. Uses
FGS function.
Not affected by color variations in objects and
background objects. Uses BGS function.
Applications
Small tablet detection Biscuit detection Passage confi rmation
CX-443
CX-442
CX-441
BGS FGS
18/07/2011
7
ORDER GUIDE
Type Appearance Sensing range Model No. (Note 1) Output
operation
Emitting
element
NPN output PNP output
Thru-beam
10 m 32.808 ft CX-411 CX-411-P
Switchable
either Light-ON
or Dark-ON
Red LED
Long sensing
range
15 m 49.213 ft CX-412 CX-412-P
Infrared
LED
30 m 98.425 ft CX-413 CX-413-P
Retrorefl ective
With polarizing
fi lters
3 m 9.843 ft (Note 2) CX-491 CX-491-P
Red LED
Long sensing
range
5 m 16.404 ft (Note 2) CX-493 CX-493-P
For transparent
object sensing
50 to 500 mm 1.969 to 19.685 in (Note 2) CX-481 CX-481-P
Infrared
LED
50 to 1,000mm 1.969 to 39.37 in (Note 2) CX-483 CX-483-P
0.1 to 2 m 0.328 to 6.562 ft (Note 2) CX-482 CX-482-P
Diffuse refl ective
100 mm 3.937 in CX-424 CX-424-P
Infrared
LED
300 mm 11.811 in CX-421 CX-421-P
800 mm 31.496 in CX-422 CX-422-P
Narrow-view
70 to 300 mm 2.756 to 11.811 in CX-423 CX-423-P Red LED
Adjustable range refl ective
Small spot
2 to 50 mm 0.079 to 1.969 in
CX-441 CX-441-P
Red LED
CX-443 CX-443-P
15 to 100 mm 0.591 to 3.937 in CX-444 CX-444-P
20 to 300 mm 0.787 to 11.811 in CX-442 CX-442-P
NOTE: Mounting bracket is not supplied with the sensor. Please select from the range of optional sensor mounting brackets.
Notes: 1) The model No. with “E” shown on the label affi xed to the thru-beam type sensor is the emitter, “D” shown on the label is the receiver.
(e.g.) Emitter of CX-411:CX-411E, Receiver of CX-411:CX-411D
2) The sensing range of the retrorefl ective type sensor is specifi ed for the RF-230 refl ector. The sensing range represents the actual sensing
range of the sensor. The sensing ranges itemized in “A” of the table below may vary depending on the shape of sensing object. Be sure to
check the operation with the actual sensing object.
Setting range
of the reflector: B
Sensing
object
Sensing
range: A
Sensor Reflector
CX-491 CX-493 CX-481 CX-483 CX-482
A0 to 3 m
0 to 9.843 ft
0 to 5 m
0 to 16.404 ft
50 to 500 mm
1.969 to 19.685 in
50 to 1,000 mm
1.969 to 39.37 in
0.1 to 2 m
0.328 to 6.562 ft
B
0.1 to 3 m
0.328 to 9.843 ft
0.1 to 5 m
0.328 to 16.404 ft
100 to 500 mm
3.937 to 19.685 in
100 to 1,000 mm
3.937 to 39.37 in
0.8 to 2 m
2.625 to 6.562 ft
Standard type
18/07/2011
8
Type Appearance Sensing range Model No.(Note 1) Output
operation
Emitting
element
NPN output PNP output
Thru-beam
10 m 32.808 ft
CX-411A-C05
CX-411A-P-C05
Light-ON
Red LED
CX-411B-C05
CX-411B-P-C05
Dark-ON
Long sensing
range
15 m 49.213 ft
CX-412A-C05
CX-412A-P-C05
Light-ON
Infrared
LED
CX-412B-C05
CX-412B-P-C05
Dark-ON
Retrorefl ective
With polarizing
fi lters
3 m 9.843 ft (Note 3)
CX-491A-C05-Y
CX-491A-P-C05-Y
Light-ON
Red LED
CX-491B-C05-Y
CX-491B-P-C05-Y
Dark-ON
NOTE: Mounting bracket is not supplied with the sensor. Please select from the range of optional sensor mounting brackets.
Notes: 1) The model No. with “E” shown on the label affi xed to the thru-beam type sensor is the emitter, “D” shown on the label is the receiver.
(e.g.) Emitter of CX-411A-C05:CX-411E, Receiver of CX-411A-C05:CX-411AD
2) The refl ector is sold separately.
3) The sensing range of the retrorefl ective type sensor is specifi ed for the RF-230 (optional) refl ector. The sensing range represents the actual
sensing range of the sensor. The sensing ranges itemized in “A” of the table below may vary depending on the shape of sensing object. Be
sure to check the operation with the actual sensing object.
Setting range
of the reflector: B
Sensing
object
Sensing
range: A
Sensor Reflector
(Optional)
CX-491
A0 to 3 m
0 to 9.843 ft
B0.1 to 3 m
0.328 to 9.843 ft
ORDER GUIDE
Basic type (Without operation mode switch and sensitivity adjuster. Cable is 0.5 m 0.02 in long)
Optional (Note 2)
18/07/2011
9
ORDER GUIDE
0.5 m 1.640 ft / 5 m 16.4 ft cable length types
0.5 m 1.640 ft / 5 m 16.404 ft cable length types (standard: 2 m 6.562 ft, basic: 0.5 m 1.640 in) are also available.
When ordering this type, suffi x “-C05” for the 0.5 m 1.640 ft cable length type, “-C5” for the 5 m 16.404 ft cable length type to the model No.
(Excluding CX-44 and basic type.)
(e.g.) 0.5 m 1.640 ft cable length type of CX-411-P is “CX-411-P-C05”
5 m 16.404 ft cable length type of CX-411-P is “CX-411-P-C5”
M8 plug-in connector type, M12 pigtailed type
M8 plug-in connector type and M12 pigtailed type are also available.
When ordering this type, suffi x “-Z” for the M8 connector type, “-J” for the M12 pigtailed type to the model No.
(Please note that M12 pigtailed type is not available for CX-44. Excluding basic type.)
(e.g.) M8 connector type of CX-411-P is “CX-411-P-Z”
M12 pigtailed type of CX-411-P is “CX-411-P-J”
Mating cables (2 cables are required for the thru-beam type.)
•
Type Model No.
Cable length
Description
For M8 plug-in
connector type
Straight CN-24A-C2 2 m 6.562 ft
Can be used with all models
CN-24A-C5 5 m 16.404 ft
Elbow CN-24AL-C2 2 m 6.562 ft
CN-24AL-C5 5 m 16.404 ft
For M12 pigtailed
type
2-core CN-22-C2 2 m 6.562 ft
Fo
r thru-beam type emitter
(2-core)
CN-22-C5 5 m 16.404 ft
4-core CN-24-C2 2 m 6.562 ft
Can be used with all models
CN-24-C5 5 m 16.404 ft
Package without refl ector
NPN output type: CX-491-Y
PNP output type: CX-491-P-Y
Accessory
RF-230
• (Refl ector)
CN-24AL-C2
•
CN-24AL-C5
CN-22-C2
•,CN-22-C5
CN-24-C2,CN-24-C5
Mating cables
CN-24A-C2
•
CN-24A-C5
31.4 mm
1.236 in
ø4 mm
ø0.157 in
ø9 mm
ø
0.354 in
23.1 mm
0.909 in
ø4 mm
ø0.157 in
ø9 mm
ø0.354 in
20.5 mm
0.807 in
300 mm
11.811 in
ø14 mm
ø0.551 in
ø5 mm
ø0.197 in
18/07/2011
10
Interference
prevention fi lter
PF-CX4-V
•
(Vertical, Silver)
PF-CX4-H
•
(Horizontal, Light brown)
Two sets of CX-411
can be mounted close
together.
Designation Model No. Slit size Sensing range Min. sensing object
Slit mask Sensor Slit on one side Slit on both sides Slit on one side Slit on both sides
Round slit mask
( )
For thru-
beam type
sensor only
OS-CX-05
CX-411
ø0.5 mm
ø0.020 in
400 mm 15.748 in 20 mm 0.787 in
ø12 mm ø0.472 in ø0.5 mm ø0.020 in
CX-412600 mm 23.622 in 30 mm 1.181 in
CX-4131,200 mm 47.242 in 60 mm 2.362 in
OS-CX-1
CX-411
ø1 mm
ø0.039 in
900 mm 35.433 in 100 mm 3.937 in
ø12 mm ø0.472 in
ø1 mm ø0.039 in
CX-4121.35 m 4.429 ft 150 mm 5.906 in
ø1.5 mm ø0.059 in
CX-4132.7 m 8.857 ft 300 mm 11.811 in
OS-CX-2
CX-411
ø2 mm
ø0.079 in
2 m 6.562 ft 400 mm 15.748 in
ø12 mm ø0.472 in
ø2 mm ø0.079 in
CX-4123 m 9.843 ft 600 mm 23.622 in
ø3 mm ø0.118 in
CX-4136 m 19.685 ft 1,200 mm 47.242 in
Rectangular slit
mask
( )
For thru-
beam type
sensor only
OS-CX-05×6
CX-411
0.5×6 mm
0.020×0.236 in
2 m 6.562 ft 400 mm 15.748 in
ø12 mm ø0.472 in 0.5×6 mm
0.020×0.236 in
CX-4123 m 9.843 ft 600 mm 23.622 in
CX-4136 m 19.685 ft 1,200 mm 47.242 in
OS-CX-1×6
CX-411
1×6 mm
0.039×0.236 in
3 m 9.843 ft 1 m 3.281 ft
ø12 mm ø0.472 in 1×6 mm
0.039×0.236 in
CX-4124.5 m 14.764 ft 1.5 m 4.921 ft
CX-4139 m 29.528 ft 3 m 9.843 ft
OS-CX-2×6
CX-411
2×6 mm
0.079×0.236 in
5 m 16.404 ft 2 m 6.562 ft
ø12 mm ø0.472 in 2×6 mm
0.079×0.236 in
CX-4127.5 m 24.606 ft 3 m 9.843 ft
CX-41315 m 49.213 ft 6 m 19.685 ft
OPTIONS
Designation Model No. Sensing range Min. sensing object
Interference
prevention fi lter
( )
For CX-411
only
PF-CX4-V
(Vertical, Silver) 2 pcs. per set
5 m 16.404 ft (Note 1) ø12 mm ø0.472 in
(Note 1)
PF-CX4-H
(Horizonal, Light brown) 2 pcs. per set
Refl ector
( )
For retro-
refl ective type
sensor only
RF-210
CX-4911 m 3.281 ft (Note 2)
ø30 mm ø1.181 in
CX-4931.5 m 4.921 ft (Note 2)
CX-481
CX-483
0.1 to 0.3 m 0.3288 to 0.984 ft (Note 2)
CX-482
0.1 to 0.6 m 0.328 to 1.969 ft (Note 2)
RF-220
CX-4911.5 m 4.921 ft (Note 2)
ø35 mm ø1.378 in
CX-4933 m 9.843 ft (Note 2)
CX-481
50 to 300 mm 1.969 to 11.811 in (Note 2)
CX-483
0.1 to 0.7 m 0.328 to 2.297 ft (Note 2)
CX-482
0.1 to 1.3 m 0.328 to 4.265 ft (Note 2)
RF-230(Note 3)
CX-491-Y3 m 9.843 ft (Note 2) ø50 mm ø1.969 in
Notes: 1) Value when attached on both sides.
2) Set the distance between the CX-491/493 and the refl ector to 0.1 m 0.328 ft or more.
However, see the table below for CX-48.
The sensing range “A” may vary depending on the shape of sensing object.
Be sure to check the operation with the actual sensing object.
Setting range
of the reflector: B
Sensing
object
Sensing
range: A
Sensor Reflector
Model No. AB
Sensor Refl ector
CX-481RF-220
50 to 300 mm 1.969 to 11.811 in
100 to 300 mm 3.937 to 11.811 in
CX-483
RF-220
0.1 to 0.7 m 0.328 to 2.297 ft 0.2 to 0.7 m 0.656 to 2.297 ft
RF-210
0.1 to 0.3 m 0.328 to 0.984 ft 0.1 to 0.3 m 0.328 to 0.984 ft
RF-230
0.05 to 1 m 0.164 to 3.281 ft
0.1 to 1 m 0.328 to 3.281 ft
CX-482RF-220
0.1 to 1.3 m 0.328 to 4.265 ft 0.5 to 1.3 m 1.640 to 4.265 ft
RF-210
0.1 to 0.6 m 0.328 to 1.969 ft 0.3 to 0.6 m 0.984 to 1.969 ft
3) RF-230 is attached to the retrorefl ective type sensor other than the basic type.
Round slit mask
OS-CX-
•
Fitted on the front face
of the sensor with one-
touch.
Rectangular slit
mask
OS-CX-
•×6
Fitted on the front face
of the sensor with one-
touch.
Round slit mask
(Stainless steel)
Rectangular slit mask
(Stainless steel)
Interference prevention filter
50.3 mm
1.98 in
8.3 mm
0.327 in
59.3 mm
2.235 in
Refl ector
RF-210
•RF-220
•
33.3 mm
1.311 in
11 mm
0.433 in
12.8 mm
0.504 in
35.3 mm
1.390 in
8.3 mm
0.327 in
42.3 mm
1.665 in
RF-230
•
18/07/2011
11
OPTIONS
Designation Model No. Description
Refl ector
mounting
bracket
MS-RF21-1
Protective mountin
g bracket for RF-210
It protects the refl ector from damage and maintains alignment.
MS-RF22 For RF-220
MS-RF23 For RF-230
Refl ective tape
RF-11
Sensing range (Note 4):
•
0.5 m 1.640 ft [CX-491]
0.8 m 2.625 ft [CX-493]
Ambient temperature: -25 to +50 °C
•
-13 to +122 °F
Ambient humidity: 35 to 85 % RH
•
Notes: 1) Keep the tape free from
stress. If it is pressed too
much, its capability may
deteriorate.
2)
Do not cut the tape. It will
deteriorate the sensing
performance.
RF-12
Sensing range (Note 4):
•
0.7 m 2.297 ft [CX-491]
1.2 m 3.937 ft [CX-493]
0.1 to 0.6 m
0.328 to 1.969 ft [CX-482]
RF-13 Sensing range (Note 5):
•
0.5 m 1.640 ft [CX-491]
Ambient temperature: -25 to +55 °C
•
-13 to +131 °F
Ambient humidity: 35 to 85 % RH
•
Sensor
mounting
bracket (Note 1)
MS-CX2-1
Foot angled mounting bracket
It can also be used for mounting RF-210.
The thru-beam type
sensor needs two
brackets.
MS-CX2-2
Foot biangled mounting bracket
It can also be used for mounting RF-210.
MS-CX2-4 Protective mounting bracket
MS-CX2-5 Back biangled mounting bracket
MS-CX-3 Back angled mounting bracket
Universal
sensor mounting
stand (Note 2)
MS-AJ1 Horizontal mounting type
Basic assembly
MS-AJ2 Vertical mounting type
MS-AJ1-A Horizontal mounting type
Lateral arm assembly
MS-AJ2-A Vertical mounting type
MS-AJ1-M Horizontal mounting type
Assembly for refl ector
MS-AJ2-M Vertical mounting type
Sensor checker
(Note 3) CHX-SC2
It is useful for beam alignment of thru-beam type sensors. The optimum
receiver position is given by indicators, as well as an audio signal.
Notes: 1) The plug-in connector type sensor does not allow use of some sensor mounting brackets
because of the protrusion of the connector.
2) Refer to the general catalog for details of the universal sensor mounting stand.
3) Refer to the general catalog for details of the sensor checker CHX-SC2.
4) Set the distance between the sensor and the refl ective tape to 0.1 m 0.328 ft (CX-482:
0.4 m 1.312 ft) or more.
5) Set the distance between the sensor and the reflective tape to 0.2 m 0.656 ft or more.
Refl ector mounting bracket
MS-RF23
•
Refl ective tape
Sensor mounting bracket
MS-RF21-1
•MS-RF22
•
Two M3 (length 12 mm
0.472 in) screws with
washers are attached.
Two M3 (length 8 mm
0.315 in) screws with
washers are attached.
Two M4 (length 10 mm
0.394 in) screws with
washers are attached.
RF-11
•RF-12
•
RF-13
•
30 mm
1.181 in
0.7 mm
0.028 in
8 mm
0.315 in
30 mm
1.181 in
25 mm
0.984 in
0.7 mm
0.028 in
30 mm
1.181 in
30 mm
1.181 in
0.5 mm
0.020 in
MS-CX2-1
•MS-CX2-2
•
MS-CX2-4
•MS-CX2-5
•
MS-CX-3
•
Sensor checker
Two M3 (length 12 mm
0.472 in) screws with
washers are attached.
Two M3 (length 12 mm
0.472 in) screws with
washers are attached.
Two M3 (length 14 mm
0.551 in) screws with
washers are attached.
Two M3 (length 12 mm
0.472 in) screws with
washers are attached.
Two M3 (length 12 mm 0.472 in)
screws with washers are attached.
CHX-SC2
•
LEVEL
POWER
CHX-SC2
Sensor checker
Universal sensor mounting stand
MS-AJ2
•MS-AJ2-A
•
With the lateral arm, the
sensor can sense from
above a production line.
Forward / back
adjustment:
130 mm 5.118 in
approx.
MS-AJ2-M
•
Elevation
angle: ±45˚
Mounting hole
for M6 screw
Swivel:
360˚ rotation
45˚
45˚
Height
adjustment:
150 mm
5.906 in
approx.
A
ngle adjustment: ±45˚
Swivel:
360˚ rotation
Mounting
hole for
M6 screw
360˚
45˚ 45˚
rotation
Height
adjustment:
150 mm
5.906 in
approx.
Height
adjustment:
150 mm
5.906 in
approx.
Mounting hole
for M6 screw
Swivel:
360˚ rotation
45˚
45˚
Elevation
angle: ±45˚
MS-AJ1
•MS-AJ1-A
•MS-AJ1-M
•
Elevation
angle: ±45˚
Swivel:
360˚ rotation
Mounting hole
for M6 screw
45˚
45˚
Height
adjustment:
150 mm
5.906 in
approx.
A
ngle adjustment: ±45˚
Swivel:
360˚ rotation
Mounting
hole for
M6 screw
360˚
45˚ 45˚
rotation
Height
adjustment:
150 mm
5.906 in
approx.
Swivel:
360˚ rotation
Elevation
angle: ±45˚
Height
adjustment:
150 mm
5.906 in
approx.
Mounting hole
for M6 screw
45˚
45˚
With the lateral arm, the
sensor can sense from
above a production line.
Forward / back
adjustment:
130 mm 5.118 in
approx.
18/07/2011
12
SPECIFICATIONS
Type Thru-beam Retrorefl ective Diffuse refl ective
Long sensing range
With polarizing fi lters
Long sensing range
For transparent object sensing
Narrow-view
Model No.
NPN output
CX-411 CX-412 CX-413 CX-491 CX-493 CX-481 CX-483 CX-482 CX-424 CX-421 CX-422 CX-423
Item
PNP output
CX-411-P CX-412-P CX-413-P CX-491-P CX-493-P CX-481-P CX-483-P CX-482-P CX-424-P CX-421-P CX-422-P CX-423-P
Sensing range 10 m
32.808 ft
15 m
49.213 ft
30m
98.425 ft
3 m 9.843 ft
(Note 2)
5 m 16.404 ft
(Note 2)
50 to 500 mm
1.969 to 19.685 in (Note 2)
50 to 1,000mm
1.969 to 39.37 in (Note 2)
0.1 to 2 m
0.328 to 6.562 ft (Note 2)
100 mm
3.937 in (Note 3)
300 mm
11.811 in (Note 3)
800 mm
31.496 in (Note 3)
70 to 200 mm
2.756 to 7.874 in (Note 3)
Sensing object ø12 mm ø0.472 in
or more opaque object (Note 4)
ø50 mm ø1.969 in
or more opaque,
translucent or
specular object
(Note 2, 5)
ø50 mm ø1.969 in
or more opaque or
translucent object
(Note 2, 5)
ø50 mm ø1.969 in or more
transparent, translucent or
opaque object (Note 2, 5)
Opaque, translucent or
transparent object (Note 5)
Opaque, translucent
or transparent
object (Note 5)
( )
Min. sensing object: ø0.5 mm
ø0.020 in copper wire
Hysteresis 15 % or less of operation distance (Note 3)
Repeatability (perpendicular to sensing axis)
0.5 mm 0.020 in or less 1 mm 0.039 in or less
0.5 mm 0.020 in or less
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption
Emitter: 15 mA or less
Receiver: 10 mA or less
Emitter: 20 mA or less
Receiver: 10 mA or less
Emitter: 25 mA or less
Receiver: 10 mA or less
13 mA
or less 10 mA or less 13 mA or less 15 mA or less
Output
<NPN output type>
NPN open-collector transistor
• Maximum sink current: 100 mA
•
Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 2 V or less (at 100 mA sink current)
1 V or less (at 16 mA sink current)
<PNP output type>
PNP open-collector transistor
• Maximum source current: 100 mA
•
Applied voltage: 30 V DC or less (between output and +V)
•
Residual voltage: 2 V or less (at 100 mA source current)
1 V or less (at 16 mA source current)
Output operation Switchable either Light-ON or Dark-ON
Short-circuit protection
Incorporated
Response time 1 ms or less
2 ms or less
1 ms or less
Operation indicator Orange LED (lights up when the output is ON)(incorporated on the receiver for thru-beam type)
Stability indicator Green LED (lights up under stable light received condition or stable dark condition)(incorporated on the receiver for thru-beam type)
Power indicator
Green LED (lights up when the power
is ON) (incorporated on the emitter)
Sensitivity adjuster Continuously variable adjuster (incorporated on the receiver for thru-beam type)
Automatic interference
prevention function
Two units of sensors
can be mounted close
together with interference
prevention fi lters. (Sensing
range: 5 m 16.404 ft)
Incorporated (Two units of sensors can be mounted close together.)
Environmental resistance
Protection IP67 (IEC)
Ambient temperature -25 to +55 °C -13 to +131 °F (No dew condensation or icing allowed), Storage: -30 to +70 °C -22 to +158 °F
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 x at the light-receiving face
Voltage withstandability
1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 M, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Emitting element (modulated)
Red LED Infrared LED Red LED Infrared LED Infrared LED Red LED
Peak emission wavelength
680 nm 0.027 mil 870 nm 0.034 mil 850 nm 0.033 mil 680 nm 0.027 mil 650 nm 0.026 mil
870 nm 0.034 mil 860 nm 0.033 mil
645 nm 0.025 mil
Material
Enclosure: PBT (Polybutylene terephthalate), Lens: Acrylic (CX-48: Polycarbonate), Indicator cover: Acrylic (CX-48: Polycarbonate)
Cable 0.2 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Cable extension
Extension up to total 100 m 328.084 ft is possible with 0.3 mm
2
, or more, cable (thru-beam type: both emitter and receiver)
Weight Net
Emitter: 45 g approx., Receiver: 50 g approx.
50 g approx.
Gross 100 g approx. 80 g approx. 60 g approx.
Accessories RF-230 (Refl ector): 1 pc.
Notes: 1) Where measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) The sensing range and the sensing object of the retrorefl ective type sensor are specified for the RF-230 refl ector. The sensing range represents the
actual sensing range of the sensor. The sensing ranges itemized in “A” of the table below may vary depending on the shape of sensing object. Be sure
to check the operation with the actual sensing object.
Setting range
of the reflector: B
Sensing
object
Sensing
range: A
Sensor Reflector
CX-491
CX-493
CX-481
CX-483
CX-482
A0 to 3 m
0 to 9.843 ft
0 to 5 m
0 to 16.404 ft
50 to 500 mm
1.969 to 19.685 in
50 to 1,000 mm
1.969 to 39.37 in
0.1 to 2 m
0.328 to 6.562 ft
B0.1 to 3 m
0.328 to 9.843 ft
0.1 to 5 m
0.328 to 16.404 ft
100 to 500 mm
3.937 to 19.685 in
100 to 1,000 mm
3.937 to 39.37 in
0.8 to 2 m
2.625 to 6.562 ft
3)
The sensing range and hysteresis of the diffuse refl ective type sensor are specifi ed for white non-glossy paper (200 × 200 mm 7.874 × 7.874 in) as the object.
4) If slit masks (optional) are fi tted, an object of ø0.5 mm ø0.020 in (using round slit mask) can be detected.
5) Make sure to confi rm detection with an actual sensor before use.
Standard type
18/07/2011
13
Type Adjustable range refl ective
Small spot
Model No.
NPN output CX-441 CX-443 CX-444 CX-442
Item PNP output CX-441-P CX-443-P CX-444-P CX-442-P
Adjustable range (Note 2) 20 to 50 mm 0.787 to 1.969 in
20 to 100 mm 0.787 to 3.937 in
40 to 300 mm 1.575 to 11.811 in
Sensing range (with white non-glossy paper)
2 to 50 mm 0.079 to 1.969 in
15 to 100 mm 0.591 to 3.937 in
20 to 300 mm 0.787 to 11.811 in
Hysteresis
(with white non-glossy paper) 2 % or less of operation distance
5 % or less of operation distance
Repeatability Along sensing axis: 1 mm 0.039 in or less, Perpendicular to sensing axis: 0.2 mm 0.008 in or less (with white non-glossy paper)
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption 25 mA or less
Output
<NPN output type>
NPN open-collector transistor
• Maximum sink current: 100 mA
•
Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 2 V or less (at 100 mA sink current)
1 V or less (at 16 mA sink current)
<PNP output type>
PNP open-collector transistor
• Maximum source current: 100 mA
•
Applied voltage: 30 V DC or less (between output and +V)
•
Residual voltage: 2 V or less (at 100 mA source current)
1 V or less (at 16 mA source current)
Output operation Switchable either Detection-ON or Detection-OFF
Short-circuit protection Incorporated
Response time 1 ms or less
Operation indicator Orange LED (lights up when the output is ON)
Stability indicator Green LED (lights up under stable operating condition) (Note 3)
Distance adjuster 5-turn mechanical adjuster
Sensing mode BGS / FGS functions Switchable with wiring of sensing mode selection input
Automatic interference prevention function (Note 4)
Incorporated
Environmental resistance
Protection IP67 (IEC)
Ambient temperature -25 to +55 °C -13 to +131 °F (No dew condensation or icing allowed), Storage: -30 to +70 °C -22 to +158 °F
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 x at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 M, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Emitting element Red LED (Peak emission wavelength: 650 mm 25.591 in, modulated)
Spot diameter ø2 mm ø0.079 in approx.
(at 50 mm 1.969 in distance)
ø6.5 mm ø0.256 in approx.
(at 50 mm 1.969 in distance)
ø9 mm ø0.354 in approx.
(at 100 mm 3.937 in distance)
15 mm 0.591 in approx.
(at 300 mm 11.811 in distance)
Material Enclosure: PBT (Polybutylene terephthalate), Lens: Polycarbonate, Indicator cover: Polycarbonate
Cable 0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Weight Net weight: 55 g approx., Gross weight: 65 g approx.
Notes: 1) Where measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can detect an object
2 mm 0.079 in [CX-444(-P): 15 mm 0.591 in,CX-442(-P): 20 mm 0.787 in], or more, away.
Actual sensing range
of the sensor: A
Sensing
object
Adjustable range: B
CX-441
/
443
CX-444
CX-442
A2 to 50 mm
0.079 to 1.969 in
15 to 100 mm
0.591 to 3.937 in
20 to 300 mm
0.787 to 11.811 in
B20 to 50 mm
0.787 to 1.969 in
20 to 100 mm
0.787 to 3.937 in
40 to 300 mm
1.575 to 11.811 in
3) Refer to the manual or the general catalog for operation of the stability indicator.
4) Note that detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to
check the operation with the actual sensing object.
SPECIFICATIONS
Standard type
18/07/2011
14
Type
Thru-beam Retrorefl ective
Long sensing range With polarizing fi lters
Model No.
Light-ON Dark-ON Light-ON Dark-ON Light-ON Dark-ON
NPN output CX-411A-C05 CX-411B-C05 CX-412A-C05 CX-412B-C05 CX-491A-C05-Y CX-491B-C05-Y
Item PNP output CX-411A-P-C05 CX-411B-P-C05 CX-412A-P-C05 CX-412B-P-C05
CX-491A-P-C05-Y CX-491B-P-C05-Y
Sensing range 10 m 32.808 ft 15 m 49.213 ft 3 m 9.843 ft (Note 2)
Sensing object ø12 mm ø0.472 in or more opaque object (Note 3) ø50 mm ø1.969 in or more transparent,
translucent or opaque object (Note 2, 4)
Hysteresis
Repeatability (perpendicular to sensing axis)
0.5 mm 0.020 in or less
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption Emitter: 15 mA or less
Receiver: 10 mA or less
Emitter: 20 mA or less
Receiver: 10 mA or less 13 mA or less
Output
<NPN output type>
NPN open-collector transistor
• Maximum sink current: 100 mA
•
Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 2 V or less (at 100 mA sink current)
1 V or less (at 16 mA sink current)
<PNP output type>
PNP open-collector transistor
• Maximum source current: 100 mA
•
Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (at 100 mA source current)
1 V or less (at 16 mA source current)
Short-circuit protection
Incorporated
Response time 1 ms or less
Operation indicator Orange LED (lights up when the output is ON)(incorporated on the receiver for thru-beam type)
Stability indicator
Green LED (lights up under stable light received condition or stable dark condition)(incorporated on the receiver for thru-beam type)
Power indicator Green LED (lights up when the power is ON) (incorporated on the emitter)
Sensitivity adjuster
Automatic interference
prevention function
Two units of sensors can be mounted
close together with interference prevention
fi lters. (Sensing range: 5 m 16.404 ft)
Incorporated (Two units of sensors can
be mounted close together.)
Environmental resistance
Protection IP67 (IEC)
Ambient temperature -25 to +55 °C -13 to +131 °F (No dew condensation or icing allowed), Storage: -30 to +70 °C -22 to +158 °F
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 x at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 M, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Emitting element (modulated) Red LED Infrared LED Red LED
Peak emission wavelength
680 nm 0.027 mil 870 nm 0.034 mil 680 nm 0.027 mil
Material Enclosure: PBT (Polybutylene terephthalate), Lens: Acrylic, Indicator cover: Acrylic
Cable 0.2 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 0.5 m 1.640 ft long
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver)
Weight Net Emitter: 20 g approx., Receiver: 20 g approx. 20 g approx.
Gross 50 g approx. 30 g approx.
Notes: 1) Where measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2)
The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-230 refl ector (optional). The sensing range
represents the actual sensing range of the sensor. The sensing ranges itemized in “A” of the table below may vary depending on the shape of sensing
object. Be sure to check the operation with the actual sensing object.
Setting range
of the reflector: B
Sensing
object
Sensing
range: A
Sensor Reflector
(Optional)
CX-491
A0 to 3 m
0 to 9.843 ft
B0.1 to 3 m
0.328 to 9.843 ft
3) If slit masks (optional) are fitted, an object of ø0.5 mm ø0.020 in (using round slit mask) can be detected.
4) Make sure to confi rm detection with an actual sensor before use.
SPECIFICATIONS
Basic type
18/07/2011
15
I/O CIRCUIT AND WIRING DIAGRAMS
I/O circuit diagram
+
–
12 to 24 V DC
±10 %
D
Tr
ZD
ZD 100 mA max.
(Brown / 1) +V
(Black / 4)
Output (Note 1)
Color code / Connector pin No. of the connector type
(Blue / 3) 0 V
*1
Load
D
User’s circuitInternal circuit
(Pink / 2) Sensing mode
selection input (Note 2, 3)
Sensor circuit
Notes: 1) The emitter of the thru-beam type sensor does not
incorporate the output.
2) Sensing mode selection input is incorporated only for the
CX-44 adjustable range refl ective type. When using the
CX-44, be sure to wire the sensing mode selection input
(pink / 2) as mentioned *1. Unstable operation may occur.
3) When the mating cable is connected to the plug-in connector
type of CX-44, its color is white.
*1
Sensing mode selection input
•
BGS function: Connect to 0 V
FGS function: Connect to +V
Symbols ... D : Reverse supply polarity protection diode
Z
D : Surge absorption zener diode
Tr : NPN output transistor
NPN output type
Wiring diagram
+
*1
–
Load
Brown
Black (Note 1)
Blue
Pink (Note 2, 3)
12 to 24 V DC
±10 %
Notes: 1)
The emitter of the thru-beam type sensor does not incorporate the black wire.
2)
The pink wire is incorporated only for the CX-44 adjustable
range refl ective type. When using the CX-44, be sure to wire
the pink wire as mentioned *
1
. Unstable operation may occur.
3) When the mating cable is connected to the plug-in connector
type of CX-44, its color is white.
*1
Sensing mode selection input
•
BGS function: Connect to 0 V
FGS function: Connect to +V
Connector pin position
M8 plug-in connector type
M12 pigtailed type
2
Sensing mode
selection input
(Note 2)
4
Output
(Note 1)
1
+V
3
0 V
2
Not
connected
1
+V
3
0 V
4
Output (Note 1)
Notes: 1)
The emitter of the thru-beam type sensor does not incorporate the output.
2) Sensing mode selection input is incorporated only for the
CX-44 adjustable range refl ective type. When using the
CX-44, be sure to wire the sensing mode selection input
(pink / 2). Unstable operation may occur.
PNP output type
I/O circuit diagram
Tr ZD
ZD
100 mA max.
User’s circuitInternal circuit
Load
(Brown / 1) +V
(Black / 4) Output (Note 1)
Color code / Connector pin No. of the connector type
(Blue / 3) 0 V
D
D
12 to 24 V DC
±10 %
*1
+
–
(Pink / 2) Sensing mode
selection input (Note 2, 3)
Sensor circuit
Notes: 1) The emitter of the thru-beam type sensor does not
incorporate the output.
2) Sensing mode selection input is incorporated only for the
CX-44-P adjustable range refl ective type. When using the
CX-44-P, be sure to wire the sensing mode selection input
(pink / 2) as mentioned *1. Unstable operation may occur.
3) When the mating cable is connected to the plug-in connector
type of CX-44-P, its color is white.
*1
Sensing mode selection input
•
BGS function: Connect to 0 V
FGS function: Connect to +V
Symbols ... D : Reverse supply polarity protection diode
Z
D : Surge absorption zener diode
Tr : PNP output transistor
Wiring diagram
+
–
*1
Load
Brown
Black (Note 1)
Blue
Pink (Note 2, 3)
12 to 24 V DC
±10 %
Notes: 1)
The emitter of the thru-beam type sensor does not incorporate the black wire.
2)
The pink wire is incorporated only for the CX-44-P adjustable
range refl ective type. When using the CX-44-P, be sure to wire
the pink wire as mentioned *
1
. Unstable operation may occur.
3) When the mating cable is connected to the plug-in connector
type of CX-44-P, its color is white.
*1
Sensing mode selection input
•
BGS function: Connect to 0 V
FGS function: Connect to +V
Connector pin position
2
Sensing mode
selection input
(Note 2)
4
Output (Note 1)
1
+V
3
0 V
2
Not
connected
1
+V
3
0 V
4
Output (Note 1)
M8 plug-in connector type
M12 pigtailed type
Notes: 1)
The emitter of the thru-beam type sensor does not incorporate the output.
2) Sensing mode selection input is incorporated only for the
CX-44-P adjustable range refl ective type. When using the
CX-44-P, be sure to wire the sensing mode selection input
(pink / 2). Unstable operation may occur.
18/07/2011
16
Do not run the wires together with high-voltage lines or
•
power lines or put them in the same raceway.
This can cause malfunction due to induction.
Extension up to total 100 m
•328.084 ft (thru-beam type:
both emitter and receiver) is possible with 0.3 mm2, or
more, cable. However, in order to reduce noise, make the
wiring as short as possible.
Make sure that stress by forcible bend or pulling is not
•
applied directly to the sensor cable joint.
Others
This product has been developed / produced for industrial
•
use only.
Do not use during the initial transient time (50 ms) after
•
the power supply is switched on.
Take care that the sensor is not directly exposed to
•
fl uorescent light from a rapid-starter lamp or a high
frequency lighting device, as it may affect the sensing
performance.
This sensor is suitable for indoor use only.
•
Do not use this sensor in places having excessive vapor,
•
dust, etc., or where it may come in direct contact with
water or corrosive gas.
Take care that the sensor does not come in direct contact
•
with water, oil, grease or organic solvents, such as,
thinner, etc.
This sensor cannot be used in an environment containing
•
infl ammable or explosive gases.
Never disassemble or modify the sensor.
•
PRECAUTIONS FOR PROPER USE
Never use this product as a sensing device
•
for personnel protection.
In case of using sensing devices for
•
personnel protection, use products which
meet laws and standards, such as OSHA,
ANSI or IEC etc., for personnel protection
applicable in each region or country.
Mounting
The tightening torque should be 0.5 N·m or less.
•
Sensor
mounting
bracket
(Optional)
M3 (length 12 mm 0.472 in)
screw with washers
Wiring
Make sure that the power supply is off while wiring.
•
Take care that wrong wiring will damage the sensor.
•
Verify that the supply voltage variation is within the rating.
•
If power is supplied from a commercial switching regulator,
•
ensure that the frame ground (F.G.) terminal of the power
supply is connected to an actual ground.
In case noise generating equipment (switching regulator,
•
inverter motor, etc.) is used in the vicinity of this product,
connect the frame ground (F.G.) terminal of the equipment
to an actual ground.
Notes: 1) Not incorporated on the emitter and the basic type sensor.
2) It is the power indicator (green) on the emitter.
3) Not incorporated on the emitter.
4) Basic type: 0.5 m 1.640 ft long.
Notes: 1) Not incorporated on the emitter.
2) It is the power indicator (green) on the emitter.
2.3
0.091
3
0.118
3.95 0.156
7.85 0.309
11.8
0.465
Beam
axis
11.2
0.441
Operation indicator (Orange)(Note 2)
Stability indicator (Green)(Note 3)
Sensitivity adjuster (Note 1)
Operation mode switch (Note 1)
3-core (emitter: 2-core)×0.2 mm2
insulator diameter: ø1.2 ø0.047
15.5 0.610
ø3.7 ø0.146 cable,
2 m 6.562 ft long (Note 4)
2-M3×0.5 0.020
thru-hole threads
()
20
0.787
31
1.220
25.4
1.000
Operation indicator (Orange)(Note 2)
Sensitivity adjuster (Note 1)
3.95 0.156
7.85 0.309
11.8
0.465
2.3
0.091
3
0.118
31
1.220
Stability indicator (Green)(Note 1)
Beam
axis
11.2
0.441
ø9.4
ø0.370
Operation mode switch (Note 1)
M8 connector
2-M3×0.5 0.020
thru-hole threads
20
0.787
( )
42.5
1.673
25.4
1.000
15.5
0.610
35.5
1.398
DIMENSIONS (Unit: mm in)The CAD data in the dimensions can be downloaded from the website:
panasonic-electric-works.net/sunx
CX-41Sensor CX-41-Z Sensor
18/07/2011
17
DIMENSIONS (Unit: mm in)The CAD data in the dimensions can be downloaded from the website:
panasonic-electric-works.net/sunx
3.95 0.156
7.85 0.309
11.8
0.465
Operation indicator (Orange)(Note 2)
Stability indicator (Green)(Note 1)
Sensitivity adjuster (Note 1)
Operation mode switch (Note 1)
3
0.118
20
0.787
2.3
0.091 M12 connector
31
1.220
25.4
1.000
15.5 0.610
ø3.7 ø0.146 cable
Beam
axis
11.2
0.441
2-M3×0.5 0.020
thru-hole threads
300
11.811
( )
( )
( )
44
1.732
3.95 0.156
7.85 0.309
11.8
0.465
Operation indicator (Orange)
Stability indicator (Green)
Sensitivity adjuster (Note 1)
Operation mode switch (Note 1)
40.157
2.3
0.091
3
0.118
11.2
0.441
Beam-receiving
part
Center of
sensing
4
0.157
Beam-emitting
part
2-M3×0.5 0.020
thru-hole threads ø3.7 ø0.146 cable,
2 m 6.562 ft long (Note 2)
20
0.787
( )
25.4
1.000
31
1.220
15.5 0.610
3-core×0.2 mm
2
insulator diameter: ø1.2 ø0.047
( )
3
0.118
2.3
0.091
11.8
0.465
7.85 0.309
3.95 0.156
Sensitivity adjuster
Operation indicator (Orange)
Stability indicator (Green) Operation mode switch
25.4
1.000
15.5 0.610
2-M3×0.5 0.020
thru-hole threads
Center of
sensing
M8 connector
11.2
0.441
ø9.4
ø0.370
Beam-emitting
part
Beam-receiving
part
4
0.157
4
0.157
42.5
1.673
20
0.787
35.5
1.398
31
1.220
( )
2.3
0.091
20
0.787
11.8
0.465
7.85 0.309
3.95 0.156
Operation mode switch
Sensitivity adjuster
Operation indicator (Orange)
Stability indicator (Green)
Center of
sensing
2-M3×0.5 0.020
thru-hole threads
Beam-emitting
part
Beam-receiving
part
15.5 0.610
40.157
4
0.157
11.2
0.441
3
0.118
ø3.7 ø0.146 cable
M12 connector
( )
44
1.732
( )
300
11.811
31
1.220
25.4
1.000
4
0.157
8.2
0.323
12.5
0.492
Stability indicator (Green)
Operation mode switch
Distance adjuster (5-turn)
Operation indicator (Orange)
30.118
0.9
0.035
20
0.787
2.8
0.110
2
0.079
11.2
0.441
2-M3×0.5 0.020
thru-hole threads
22
0.866
Beam-
receiving part
Beam-
emitting part
Center of
sensing
ø3.7 ø0.146 cable,
2 m 6.562 ft long
4-core × 0.2mm2
insulator diameter:
ø1.2 ø0.047
31
1.220
25.4
1.000
22
0.866
ø9.4
0.370 2-M3×0.5 0.020
thru-hole threads
11.2
0.441
Beam-
receiving part
Beam-
emitting part
Center of
sensing
31
1.220
25.4
1.000
42.5
1.673
35.5
1.398
2.8
0.110
2
0.079
30.118
0.9
0.035
M8 connector
4
0.157
8.2
0.323
12.5
0.492
Stability indicator (Green)
Operation mode switch
Distance adjuster (5-turn)
Operation indicator (Orange)
20
0.787
CX-41
-J Sensor
CX-49
-Z CX-48
-Z CX-42
-Z Sensor
CX-44
Sensor
CX-49
CX-48
CX-42
Sensor
CX-49
-J CX-48
-J CX-42
-J Sensor
CX-44
-Z Sensor
Notes: 1) Not incorporated on the Bacic type sensors.
2) Basic type: 0.5 m 1.640 ft long.
Notes: 1) Not incorporated on the emitter.
2) It is the power indicator (green) on the emitter.
18/07/2011
18
Material: Acrylic (Reflector)
ABS (Base)
2-ø4.6 ø0.181
mounting
holes
50.3
1.980
40
1.575
50.197
8.3
0.327
3.3
0.130
10 0.394
59.3
2.335
49.3
1.941
( )
30
1.181
Material: Acrylic (Reflector)
ABS (Base)
35.3
1.390
42.3
1.665
34.3
1.350
25
0.984
2-ø3.6 ø0.142
mounting
holes
40.157
80.315
8.3
0.327
3.3
0.130
21
0.827
( )
Material: Acrylic (Reflector)
ABS (Base)
Two M3 (length 8 mm 0.315 in)
screws with washers and two nuts are attached.
33.3
1.311
Reflector
M3 nut mounting holes
(for mounting at the back)
Base
25
0.984
3.2
0.126
10
0.394
2-ø3.4 ø0.134 thru-holes
(for mounting at the side)
(for mounting at the back)
2-ø3.4 ø0.134 holes,
60.236 deep
(for mounting at the side)
2-M3 nut mounting holes
12.8 0.504
11 0.433
Material: Acrylic
8
0.315
28
1.102
6
0.236
30
1.181
Adhesive
tape
Effective
reflecting surface
0.7
0.028
( )
( )
Material: Acrylic
( )
30
1.181
0.7
0.028
28
1.102
25
0.984
23
0.906
Adhesive
tape
Effective
reflecting surface
( )
0.5
0.020
30
1.181
30
1.181
( )
Reflective surface
(Acrylic)
Rear surface
pressure-sensitive
adhesive
DIMENSIONS (Unit: mm in)The CAD data in the dimensions can be downloaded from the website:
panasonic-electric-works.net/sunx
Assembly dimensions
Mounting drawing with the
receiver of CX-41
Material: Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in) screws
with washers are attached.
3.4
0.134
80.315
14 0.551
5
0.197
3
0.118
3.4
0.134
14
˚
10 0.394
7
˚2-ø3.4 ø0.134 holes
(for RF-210)
3.4
0.134
12.5 0.492
t 1.2
t 0.047
12
0.472
R12
R0.472
22
0.866
15
0.591
20
0.787
R25
R0.984
25
0.984
42.5
1.673
Beam axis
9.5
0.374
25
0.984
12.3 0.484
t 1.2
t 0.047
25.4
1.000
0.3
0.012
7˚
13.6 0.535
3.4
0.134
3.4
0.134
5
0.197
3
0.118
14˚
12
0.472
0.5
0.020
31
1.220 42.5
1.673
( )
22
0.866
25.2
0.992
20
0.787
R12 R0.472
RF-220 Refl ector (Optional) RF-210 Refl ector (Optional)
RF-11
Refl ective tape (Optional)
RF-12
Refl ective tape (Optional)
RF-13
Refl ective tape (Optional)
MS-CX2-1 Sensor mounting bracket (Optional)
RF-230
Refl ector (Accessory for the retrorefl ective type sensor)
18/07/2011
19
DIMENSIONS (Unit: mm in)The CAD data in the dimensions can be downloaded from the website:
panasonic-electric-works.net/sunx
Assembly dimensions
Mounting drawing with the
receiver of CX-41
Assembly dimensions
Mounting drawing
with the receiver
of CX-41
Material: Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in) screws
with washers are attached.
15.8
0.622
t 2
t 0.079 50.197
4.5
0.177
4.5
0.177
14˚
7.8
0.307
4.5 0.177
40.157
12
0.472
7.8
0.307
70.276
23
0.906
10
0.394
8-ø3.4 ø0.134
holes
R12 R0.472
14
0.551
7
0.276
14
0.551
36
1.417 55
2.165
22 0.866
25
0.984
15.5
0.610
( )
Beam axis
15.8
0.622
8.2
0.323
t 2
t 0.079
3.6
0.142
4
0.157
14
0.551
4.5
0.177
4.5
0.177
12
0.472
50.197
14˚
R12 R0.472
70.276
4.5 0.177
4
0.157
8.2 0.323
28
1.102
55
2.165
36
1.417
22
0.866
25.4
1.000
15.5
0.610
Material: Stainless steel (SUS304)
Two M3 (length 14 mm 0.551 in) screws
with washers are attached.
3.4
0.134
3.4
0.134
4
0.157
7°
14°
ø25 ø0.984
R25
R0.984
SENSOR
18
0.709
13
0.512
t 2.5
t 0.098
6.2
0.244
R9.5
R0.374
SENSOR
29
1.142
19
0.748
5.5
0.217
5.5
0.217
6
0.236
7
0.276
20°
40°
ø55 ø2.165
ø39 ø1.535
25
0.984
25
0.984
25
0.984
19
0.748
46
1.811
SENSOR
SENSOR
20°40°
7
0.276
0.9
0.035
13
0.512
11.2
0.441
0.9
0.035
12.3 0.484
25
0.984
t 2.5
t 0.098
Beam axis
46
1.811
SENSOR
SENSOR
ø55 ø2.165
ø39 ø1.535
29
1.142
18
0.709
25.4
1.000
Assembly dimensions
Mounting drawing with the
receiver of CX-41
Material: Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in) screws
with washers are attached.
3.4
0.134
3.4
0.134
3.5
0.138
6.5 0.256
50.197
7°
15
0.591 t 1.5
t 0.059
8
0.315
5
0.197
7.9
0.311
7
0.276
45
1.772
18.9
0.744
37
1.457
20
0.787
19
0.748
25
0.984
R19
R0.748
R25
R0.984
19
0.748
t 1.5
t 0.059 25.4
1.000
Beam axis
7°
R25
R0.984
7
0.276
20
0.787
6.5 0.256
50.197
5
0.197
7.9 0.311
20.6
0.811
26.2
1.031
45
1.772
18.9
0.744
37
1.457
15
0.591
MS-CX2-2 Sensor mounting bracket (Optional)
MS-CX2-4 Sensor mounting bracket (Optional)
MS-CX2-5 Sensor mounting bracket (Optional)
18/07/2011
20
Material: Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in) screws with washers are attached.
t 1.2
t 0.047
20.5
0.807
3.5
0.138
3.4
0.134
3.4
0.134
10°
R25
R0.984
5
0.197
3.4
0.134
10° 5
0.197
15
0.591
14
0.551
8
0.315
3.4
0.134
6
0.236
8.5
0.335
6
0.236
30 1.181
35
1.378
25
0.984
18
0.709
R25
R0.984
Assembly dimensions
Mounting drawing with the
receiver of CX-41
13.6
0.535
3.4
0.134 8
0.315
14
0.551
6
0.236
90.354
8.5
0.335
18
0.709
Beam axis
0.5
0.020
3.5
0.138
4.8
0.189
t 1.2
t 0.047
0.3
0.012
10
°
25.2
0.992
11.2
0.441
60.236
31
1.220
30
1.181
25.4
1.000
35
1.378
( )
20
0.787
Assembly dimensions
Material: Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in) screws with washers are attached.
12.5 0.492
t 1.2
t 0.047
13
0.512
ø25
ø0.984
16
0.630
10
0.394 3.5
0.138
3.2
0.126
R7.5
R0.295
25
0.984
46
1.811
20°
23
0.906
50
1.969
5.5
0.217
ø36
ø1.417
30°
46
1.811 25
0.984
13
0.512
10
0.394
20°
50
1.969
ø36
ø1.417
30°
23
0.906
5.5
0.217
DIMENSIONS (Unit: mm in)The CAD data in the dimensions can be downloaded from the website:
panasonic-electric-works.net/sunx
Assembly dimensions
Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated)
Two M3 (length 8 mm 0.315 in) screws with washers are attached.
4.5
0.177
10
0.394
11
0.433
25
0.984
35
1.378 4
0.157
16 0.630
10 0.394
60.236
80.315
44
1.732
20
0.787
t 1.6
t 0.063
8-M3×0.5 0.020
thru-hole threads
25
0.984
4.5
0.177
25
0.984
10
0.394 28.3
1.114
8.3
0.327
34.3
1.350
8 0.315
4
0.157
21
0.827
35.3
1.390
44.3
1.744
6
0.236
27
1.063
t 1.6
t 0.063
19.3
0.760
( ) ( )
MS-CX-3 Sensor mounting bracket (Optional)
MS-RF21-1 Refl ector mounting bracket for RF-210 (Optional)
MS-RF22 Refl ector mounting bracket for RF-220 (Optional)
18/07/2011
21
DIMENSIONS (Unit: mm in)The CAD data in the dimensions can be downloaded from the website:
panasonic-electric-works.net/sunx
Assembly dimensions
Material: Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
Two M4 (length 10 mm 0.394 in) screws with washers are attached.
40
1.575 4.5
0.177
3
0.118 10
0.394 11
0.433
50
1.969
40
1.575
50.197
16 0.630
15 0.591
18 0.709
70.276
20
0.787
t 2
t 0.079
8-M4×0.7 0.028 thru-hole threads
26
1.024
12
0.472
35
1.378
3
0.118
61
2.402
( )
( )
28
1.102
( )
40
1.575
4.5
0.177
28.3
1.114
19.3
0.760
8.3
0.327
10
0.394
50.3
1.980
49.3
1.941
5
0.197
t 2
t 0.079
10
0.394
30
1.181
61.3
2.413
7
0.276
37
1.457
40
1.575
( )
( )
25.5
1.004
10
0.394
2-ø6.6 ø0.260 mounting holes
45
1.772
32
1.260
Base
(PA)
8
0.315
18
0.709
20
0.787
28
1.102
20
0.787
10.039
20
0.787
1
0.039
25
0.984
33
1.299
17.8
0.701
12
0.472
11.8
0.465
44.5
1.752
218
8.583
147
5.787
28
1.102
45°
45°
t 2
t 0.079
60.236
20 0.787
Attachment
(Nylon 6) M4 hexagon-
socket-head
bolt
2-ø3.2 ø0.126
mounting holes
2-3.2 0.126×4.2 0.165
oblong holes
ø10 ø0.394 pipe
[Stainless steel (SUS304)]
Sensor mounting bracket
[Stainless steel (SUS304)]
Cable guide
(POM)
4.2 0.165
3.2
0.126
(Note)
4
0.157
20
0.787
( )
( )
( )
Two M3 (length 14 mm 0.551 in) screws
with washers, two M3 (length 16 mm
0.630 in) screws with washers, two M3
(length 18 mm 0.709 in) screws with
washers, one auxiliary mounting plate for
EQ-20 series and one auxiliary mounting
plate for EX-40 series are attached.
11.8
0.465
20 0.787
17.8
0.701
12
0.472
t 2
t 0.079
2-ø3.2 ø0.126
mounting holes
2-3.2 0.126×4.2 0.165
oblong holes
45°
45°
4.2 0.165
3.2
0.126
M4 hexagon-
socket-head
bolt
10.039
1
0.039
20
0.787
25
0.984
33
1.299
20
0.787
Attachment
(Nylon 6)
Sensor mounting bracket
[Stainless steel (SUS304)]
ø10 ø0.394 pipe
[Stainless steel (SUS304)]
2-ø6.6 ø0.260
mounting holes
Base
(PA)
32
1.260
46
1.811
20
0.787
8
0.315
15
0.591
31
1.220
20
0.787
36.5
1.437
( )
( )
( )
147
5.787 (Note)
Cable guide
(POM)
10
0.394
24.5
0.965
20
0.787
210
8.268
28
1.102
60.236
4
0.157
Two M3 (length 14 mm 0.551 in) screws
with washers, two M3 (length 16 mm
0.630 in) screws with washers, two M3
(length 18 mm 0.709 in) screws with
washers, one auxiliary mounting plate for
EQ-20 series and one auxiliary mounting
plate for EX-40 series are attached.
Note: The dimensions in the brackets indicate the adjustable range of
the movable part.
Note: The dimensions in the brackets indicate the adjustable range of
the movable part.
Assembly dimensions with CX-400 series
(Mounting part only)
Assembly dimensions with RF-210 (Refl ector)
(Mounting part only)
20
0.787
11.8
0.465
33
1.299
20
0.787
28
1.102
27
1.063
17.6
0.693
45°
45°
t 2
t 0.079
6
0.236
Center of sensing
2-M3 (length14 mm 0.551 in)
screws with washers 4.2
0.165
25.4
1.000
23.2
0.913 18.4
0.724
24.8
0.976
45°
45°
t 2
t 0.079
25
0.984
33.3
1.311
31.8
1.252
20
0.787
2-M3 (length14 mm 0.551 in)
screws with washers
4.2
0.165
20
0.787
11.8
0.465
6
0.236
33
1.299
MS-RF23 Refl ector mounting bracket for RF-230 (Optional)
MS-AJ1
Universal sensor mounting stand (Optional)
MS-AJ2
Universal sensor mounting stand (Optional)
18/07/2011
22
DIMENSIONS (Unit: mm in)The CAD data in the dimensions can be downloaded from the website:
panasonic-electric-works.net/sunx
( )
( )
( )
( )
( )
( )
25.5
1.004
10
0.394
2-ø6.6
ø
0.260 mounting holes
45
1.772
32
1.260
Base
(PA)
8
0.315
18
0.709
20
0.787
28
1.102
28.45
1.120
12
0.472
16.5
0.650
147
5.787
(Note 1)
44.5
1.752
203.5
8.012
134
5.276 (Note 1) 33
1.299
210
8.268 16.5
0.650
33
1.299
60.236
218
8.583
2-ø3.2 ø0.126
mounting holes
Arm joint
(Nylon 6)
ø10 ø0.394 pipe
[Stainless steel (SUS304)]
ø10 ø0.394 pipe
[Stainless steel (SUS304)]
2-3.2 0.126×4.2 0.165
oblong holes
Cable guide
(POM)
Sensor mounting bracket
[Stainless steel (SUS304)]
(Note 2)
4.2
0.165
( )
Two M3 (length 14 mm 0.551 in) screws
with washers, two M3 (length 16 mm
0.630 in) screws with washers, two M3
(length 18 mm 0.709 in) screws with
washers, one auxiliary mounting plate for
EQ-20 series and one auxiliary mounting
plate for EX-40 series are attached.
( )
( )
( )
( ) ( )
( )
( )
24.5
0.965
32
1.260
46
1.811
Base
(PA)
31
1.220
15
0.591
8
0.315
10
0.394
20
0.787
2-ø6.6 ø0.260
mounting holes
28.45
1.120
12
0.472
16.5
0.650
147
5.787
(Note 1)
36.5
1.437
208.5
8.209
134
5.276 (Note 1) 33
1.299
210
8.268
16.5
0.650
33
1.299
60.236
210
8.268
20
0.787
2-ø3.2 ø0.126
mounting holes
Arm joint
(Nylon 6)
ø10
ø
0.394 pipe
[Stainless steel (SUS304)]
ø10
ø
0.394 pipe
2-3.2 0.126×4.2 0.165
oblong holes
Cable guide
(POM)
Sensor mounting bracket
[Stainless steel (SUS304)]
(Note 2)
4.2
0.165
[Stainless steel (SUS304)]
Two M3 (length 14 mm 0.551 in) screws with
washers, two M3 (length 16 mm 0.630 in) screws
with washers, two M3 (length 18 mm 0.709 in)
screws with washers, one auxiliary mounting
plate for EQ-20 series and one auxiliary mounting
plate for EX-40 series are attached.
Assembly dimensions with RF-220 (Refl ector)
(Mounting part only)
Assembly dimensions with RF-230 (Refl ector)
(Mounting part only)
Two M3 (length 8 mm 0.315 in)
screws with washers and two M4
(length 8 mm 0.315 in) screws
with washers are attached.
(Note)
147
5.787
18
0.709
28
1.102
11.8
0.465
25.5
1.004
10
0.394
32
1.260
2-ø6.6 ø0.260 mounting holes
ø10 ø0.394 pipe
[Stainless steel (SUS304)]
8
0.315
45
1.772
20
0.787
Base
(PA)
20
0.787
28
1.102
2-M4
25
0.984
45°
45°
Attachment
(Nylon 6)
2-M3
t 2 t 0.079
22
0.866
17
0.669
M4 hexagon-
socket-head bolt
208
8.189
50
1.969
40
1.575
44.5
1.752
4.2
0.165
( ) ( )
( )
t 2
t 0.079
M4 hexagon-socket-
head bolt
20
0.787
11.8
0.465
28
1.102
45.3
1.783
28
1.102
45°
45°
36.3
1.429
20
0.787
2-M3 (length 8 mm 0.315 in)
screws with washers
55.3
2.177
38
1.496
12
0.472
50
1.969
4.2
0.165
35.3
1.390
Two M3 (length 8 mm 0.315 in)
screws with washers and two M4
(length 8 mm 0.315 in) screws
with washers are attached.
22
0.866
2-M4
25
0.984
11.8
0.465 17
0.669
M4 hexagon-
socket-head bolt
2-M3
t 2 t 0.079
45°
45°
28
1.102
20
0.787
Attachment
(Nylon 6)
ø10 ø0.394 pipe
[Stainless steel (SUS304)]
(Note)
32
1.260 24.5
0.965
31
1.220
15
0.591
8
0.315
46
1.811
Base
(PA)
10
0.394
20
0.787
2-ø6.6 ø0.260
mounting holes
20
0.787
200
7.874
143.5
5.650
40
1.575
50
1.969
4.2
0.165
40
1.575
( )
( )
( )
11.8
0.465
71.3
2.807
20
0.787
45°
45°
t 2
t 0.079
2-M4 (length 8 mm 0.315 in)
screws with washers
28
1.102
36.3
1.429
20
0.787
M4 hexagon-socket-
head bolt
47
1.850
50.3
1.980
37
1.457
61.3
2.413
4.2
0.165
MS-AJ1-A
Universal sensor mounting stand (Optional)
MS-AJ1-M
Universal sensor mounting stand (Optional)
MS-AJ2-M
Universal sensor mounting stand (Optional)
MS-AJ2-A
Universal sensor mounting stand (Optional)
Notes: 1) The dimensions in the brackets indicate the adjustable range
of the movable part.
2) Refer to MS-AJ1 / MS-AJ2 for the assembly dimensions with
the sensor mounting bracket, sensor or refl ector.
Notes: 1) The dimensions in the brackets indicate the adjustable range
of the movable part.
2) Refer to MS-AJ1 / MS-AJ2 for the assembly dimensions with
the sensor mounting bracket, sensor or refl ector.
Note: The dimensions in the brackets indicate the adjustable range of
the movable part.
Note: The dimensions in the brackets indicate the adjustable range of
the movable part.
18/07/2011
Protecting the
environment is
one of our
guiding business
principles
ISO 14001 environmental management
system certification acquired
Our Nagoya Head Office and Factory acquired
ISO 14001 certification in September 1999.
Now and into the future, we will continuously
improve environmental management systems
based on our Environment Policy, which
focuses on the promotion of environmentally
friendly business activities and product
development.
Promoting a totally lead-free
working environment
We are now working to
eliminate the use of lead in all
our in-house manufacturing
processes such as in reflow
ovens, hand soldering and
parts and substrates
procurement.
Using simple packaging
Simple, environmentally friendly
packaging material reduces
waste.
Pleasecontact.......... PanasonicElectricWorksSUNXCo.,Ltd.
2431-1Ushiyama-cho,Kasugai-shi,Aichi,486-0901,Japan
■Telephone:+81-568-33-7211■Facsimile:+81-568-33-2631
OverseasMarketingDepartment
■Telephone:+81-568-33-7861■Facsimile:+81-568-33-8591
panasonic-electric-works.net/sunx
AllRightsReserved©PanasonicElectricWorksSUNXCo.,Ltd.2010
Spedficationsaresubjecttochangewithoutnotice. PrintedinJapanNo.CE-CX400-2-3November,2010
18/07/2011