DISCRETE SEMICONDUCTORS DATA SHEET age M3D088 BAT754 series Schottky barrier (double) diodes Product specification Supersedes data of 1999 Aug 05 2003 Mar 25 Philips Semiconductors Product specification Schottky barrier (double) diodes BAT754 series PINNING FEATURES * Very low forward voltage BAT754 PIN * Guard ring protected * Small plastic SMD package * Low diode capacitance. A C S 1 a k1 a1 a1 2 n.c. k2 a2 k2 3 k 3 1 2 MLC360 a1, a2 k1, k2 k1, a2 APPLICATIONS * Ultra high-speed switching * Voltage clamping handbook, 2 columns Fig.3 3 BAT754A diode configuration (symbol). * Protection circuits * Blocking diodes * Low power consumption applications, e.g. hand-held applications. 3 1 2 1 Top view DESCRIPTION Planar Schottky barrier diodes encapsulated in a SOT23 small plastic SMD package. Low forward voltage selection of the BAT54 series. Single diodes and double diodes with different pinning are available. Fig.1 TYPE NUMBER MGC421 Simplified outline (SOT23) and pin configuration. MARKING BAT754 2K* BAT754A 2L* BAT754C 2M* BAT754S 2N* Note 1 Fig.4 BAT754C diode configuration (symbol). 3 2 n.c. 1 MLC357 Fig.2 BAT754 single diode configuration (symbol). 1. = p : Made in Hong Kong. = t : Made in Malaysia. = W : Made in China. 2003 Mar 25 MLC359 3 MARKING CODE(1) 2 2 2 MLC358 Fig.5 BAT754S diode configuration (symbol). Philips Semiconductors Product specification Schottky barrier (double) diodes BAT754 series LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT Per diode - 30 V - 200 mA - 300 mA - 600 mA storage temperature -65 +150 C junction temperature - 125 C operating ambient temperature -65 +125 C VR continuous reverse voltage IF continuous forward current IFRM repetitive peak forward current tp 1 s; 0.5 IFSM non-repetitive peak forward current t = 8.3 ms half sinewave; JEDEC method Tstg Tj Tamb ELECTRICAL CHARACTERISTICS Tamb = 25 C unless otherwise specified. SYMBOL PARAMETER CONDITIONS TYP. MAX. UNIT Per diode VF forward voltage see Fig.6 IF = 0.1 mA - 200 mV IF = 1 mA - 260 mV IF = 10 mA - 340 mV IF = 30 mA - 420 mV IF = 100 mA 600 - mV IR reverse current VR = 25 V; note 1; see Fig.7 - 2 A Cd diode capacitance f = 1 MHz; VR = 1 V; see Fig.8 - 10 pF Note 1. Pulse test: tp = 300 s; 0.02. THERMAL CHARACTERISTICS SYMBOL Rth j-a PARAMETER thermal resistance from junction to ambient CONDITIONS note 1 Note 1. Refer to SOT23 standard mounting conditions. 2003 Mar 25 3 VALUE UNIT 500 K/W Philips Semiconductors Product specification Schottky barrier (double) diodes BAT754 series GRAPHICAL DATA MSA892 IF IR (A) (1) (2) (3) (mA) 10 MSA893 10 3 3 10halfpage handbook, (1) 10 2 2 (2) 10 10 (1) 1 10 1 (2) (3) 1 (3) 10 1 0 0.4 0.8 VF (V) 0 1.2 10 (1) Tamb = 125 C. (2) Tamb = 85 C. (3) Tamb = 25 C. (1) Tamb = 125 C. (2) Tamb = 85 C. (3) Tamb = 25 C. Fig.6 Fig.7 Forward current as a function of forward voltage; typical values. MSA891 15 handbook, halfpage Cd (pF) 10 5 0 0 10 20 VR (V) 30 f = 1 MHz; Tamb = 25 C. Fig.8 Diode capacitance as a function of reverse voltage; typical values. 2003 Mar 25 4 20 VR (V) 30 Reverse current as a function of reverse voltage; typical values. Philips Semiconductors Product specification Schottky barrier (double) diodes BAT754 series PACKAGE OUTLINE Plastic surface mounted package; 3 leads SOT23 D E B A X HE v M A 3 Q A A1 1 2 e1 bp c w M B Lp e detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 max. bp c D E e e1 HE Lp Q v w mm 1.1 0.9 0.1 0.48 0.38 0.15 0.09 3.0 2.8 1.4 1.2 1.9 0.95 2.5 2.1 0.45 0.15 0.55 0.45 0.2 0.1 OUTLINE VERSION SOT23 2003 Mar 25 REFERENCES IEC JEDEC EIAJ EUROPEAN PROJECTION ISSUE DATE 97-02-28 99-09-13 TO-236AB 5 Philips Semiconductors Product specification Schottky barrier (double) diodes BAT754 series DATA SHEET STATUS LEVEL DATA SHEET STATUS(1) PRODUCT STATUS(2)(3) Development DEFINITION I Objective data II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Production This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2003 Mar 25 6 Philips Semiconductors Product specification Schottky barrier (double) diodes BAT754 series NOTES 2003 Mar 25 7 Philips Semiconductors - a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. SCA75 (c) Koninklijke Philips Electronics N.V. 2003 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613514/02/pp8 Date of release: 2003 Mar 25 Document order number: 9397 750 10968