MB6SA..MB10SA 0.5 Amp. Miniature Single Phase Glass Passivated Surface Mount Bridge Rectifier TO-269AA / MBS Current 0.5 A Voltage 600 V to 1000 V FEATURES Saves space on printed circuit boards Ideal for automated placement High surge current capability Solder dip 260C, 10s Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C MECHANICAL DATA Case : TO-269AA/MBS. Epoxy meets UL 94V-0 flammability rating. Polarity: As marked on body. Terminals : Matte tin plated leads, solderable per MIL-STD-750 Method 2026, J-STD-002 and JESD22-B102. Consumer grade, meets JESD 201 class 1A whisker test. TYPICAL APPLICATIONS Used in general purpose ac-to-dc bridge full wave rectification for power supply, lighting ballaster, Battery charger, home appliances, office equipement, and terlecommunication applications. Maximun Ratings and Electrical Characteristics at 25C Marking Code MB6SA MB8SA MB10SA MB6 MB8 MB10 VRRM Maximum Recurrent Peak Reverse Voltage (V) 600 800 1000 VRMS Maximum RMS Voltage (V) 420 560 700 VDC Maximum DC Blocking Voltage (V) 600 800 1000 IF(AV) Maximum Average Forward Output Current (see Fig. 1) On glass-epoxy P.C.B. On aluminum substrate IFSM Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) 30 A VF Maximum Instantaneous Forward Voltage @ 0.4 A 1.0 V IR Maximum DC Reverse Current @ Ta = 25 C at Rated DC Blocking Voltage @ Ta = 125 C 0.5 A(1) 0.8 A(2) 5 A 100 A Cj Rth (j-a) Rth (j-a) Rth (j-l) Tj Typical Junction Capacitance Per Leg Operating Temperature Range -55 to + 150 C Tstg Storage Temperature Range -55 to + 150 C Typical Thermal Resistance Per Leg 13 pF 85 C/W(1) 70 C/W(2) 20 C/W(1) Notes: 1. On glass epoxy P.C.B. mounted 1.3x1.3mm pads 2. On aluminium substrate P.C.B. whith an area of 20x20mm mounted on 1.3x1.3mm solder pad www.fagorelectronica.com Document Name: mbsa Version: Jan-12 Page Number: 1/4 MB6SA..MB10SA 0.5 Amp. Miniature Single Phase Glass Passivated Surface Mount Bridge Rectifier Ordering information PREFERRED P/N PACKAGE CODE MB6SA TR TR DELIVERY MODE BASE QUANTITY UNIT WEIGHT (g) 13" diameter tape and reel 3,000 0.22 Package Outline Dimensions: (mm) TO-269AA / MBS 7 MAX 1.50.2 4.10.05 1.10.2 0.250.1 Mounting Pad Layout 1.2 Marking code 5.9 MC WWY 0.90.2 1.2 2.50.2 0.10.2 3 MAX 1.5 0.2 Year code Week code 0.60.2 2.50.2 4.70.2 www.fagorelectronica.com Document Name: mbsa 2.5 Version: Jan-12 Page Number: 2/4 MB6SA..MB10SA 0.5 Amp. Miniature Single Phase Glass Passivated Surface Mount Bridge Rectifier TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 0.8 IF, instantaneous forward current (A) IF(AV), average forward rectified current (A) Ratings and Characteristics (Ta 25 C unless otherwise noted) Aluminum Substrate 0.7 0.6 0.5 Glass Epoxy P.C.B. 0.4 0.3 0.2 0.1 0 Resistive or Inductive Load 0 10 Tj = 150 C 1 Tj = 25 C 0.1 Pulse Width=300 s 1% Duty Cycle 0.01 0.2 0.4 0.6 0.8 20 40 60 80 100 120 140 160 1 1.2 1.4 1.6 VF, instantaneous forward voltage (V) MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG TYPICAL JUNCTION CAPACITANCE PER LEG 30 35 Ta=40C Single Half Sine Wave (JEDEC Method) 30 Cj, junction capacitance (pF) IFSM, peak forward surge current (A) Ambient temperature (C) 25 F=60 Hz 20 F=50 Hz 15 10 5 25 20 15 10 5 1 Cycle 0 1 10 Tj = 25 C f = 1.0 MHz Vsig = 50mVp-p 0 0.1 100 100 200 VR, reverse voltage (V) Number of cycles IR, instantaneous reverse leakage current (mA) 10 1 TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG 100 REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM trr 10W NON INDUCTIVE 50W NON INDUCTIVE Tj = 125 C +0.5A 10 (-) DUT (+) 50Vdc (approx) (-) 1 1W NON INDUCTIVE PULSE GENERATOR (NOTE 2) OSCILLOSCOPE (NOTE 1) 0 -0.25A (+) -1.0A 0.1 0.01 NOTES: 1. Rise Time = 7ns max. Input Impedance = 1 megohm 22 pf 2. Rise Time = 10 ns max. Sourse Impedance = 50 ohms Tj = 25 C 0 20 40 60 80 1cm SET TIME BASE FOR 5/ 10ns/ cm 100 Percent of rated peak reverse voltage (%) www.fagorelectronica.com Document Name: mbsa Version: Jan-12 Page Number: 3/4 MB6SA..MB10SA 0.5 Amp. Miniature Single Phase Glass Passivated Surface Mount Bridge Rectifier Disclaimer All product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. Fagor Electronica, S.Coop., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Fagor"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Fagor makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Fagor disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Fagor's knowledge of typical requirements that are often placed on Fagor products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Fagor's terms and conditions of purchase, including but nos limited to the warranty expressed therein. Except as expressly indicated in writing. Fagor products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Fagor product could result in personal injury or death. Customers using or selling Fagor products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Fagor and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attomeys fees, even if such claim alleges that Fagor or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Fagor personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Fagor, Product names and markings noted herein may be trademarks of their respective owners. www.fagorelectronica.com Document Name: mbsa Version: Jan-12 Page Number: 4/4