TLP627-2TP - Toshiba - Pdf.Support

TLP627,TLP627-2,TLP627-4

2007-10-01 1

TOSHIBA Photocoupler GaAs IRED & Photo-Transistor

TLP627,TLP627-2,TLP627-4

Programmable Controllers

DC-output Module

Telecommunication

The TOSHIBA TLP627,-2 and -4 consists of a gallium arsenide infrared

emitting diode optically coupled to a darlington connected phototransistor

which has an integral base-emitter resistor to optimize switching speed and

elevated temperature characteristics.

The TLP627-2 offers two isolated channels in a eight lead plastic DIP,

while the TLP627-4 provide four isolated channels per package.

z Collector-Emitter Voltage

: 300V(Min)

z Current Transfer Ratio : 1000%(Min)

z Isolation Voltage : 5000Vrms(Min)

z UL Recognized : UL1577,File No.E67349

Made in Japan Made in Thailand

UL Recognized E67349 *1 E152349 *1

BSI Approved 7426, 7427 *2 7426, 7427 *2

*1 UL1577

*2 BS EN60065: 2002, BS EN60950-1: 2002

TOSHIBA 11−5B2

Weight: 0.26 g (typ.)

TOSHIBA 11−10C4

Weight: 0.54 g (typ.)

TOSHIBA 11−20A3

Weight: 1.1 g (typ.)

Unit in mm

1: ANODE

2: CATHODE

3: EMITTER

4:COLLECTOR

2 3

TLP627

4 5

TLP627-2

1,3: ANODE

2,4: CATHODE

5,7: EMITTER

6,8:COLLECTOR

TLP627-4

1,3,5,7 : ANODE

2,4,6,8 : CATHODE

9,11,13,15 : EMITTER

10,12,14,16 :COLLECTOR

Pin Configuration (top view)

TLP627,TLP627-2,TLP627-4

2007-10-01 2

Absolute Maximum Ratings (Ta=25°C)

Rating

Characteristics Symbol

TLP627 TLP627-2

TLP627-4

Unit

Forward Current IF 60 50 mA

Forward Current Derating ∆IF /°C −0.7(Ta≥39°C) −0.5(Ta≥25°C) mA /°C

Pulse Forward Current IFP 1(100μs pulse,100pps) A

Power Dissipation (1 Circuit) PD 100 70 mW

Power Dissipation Derating (Ta≥25°C,1 Circuit) ∆ PD /°C -1.0 -0.7 mW /°C

Reverse Voltage VR 5 V

LED

Junction Temperature Tj 125 °C

Collector-Emitter Voltage VCEO 300 V

Emitter -Collector Voltage VECO 0.3 V

Collector Current IC 150 mA

Collector Power Dissipation (1 Circuit) P

C 150(*300) 100 mW

Collector Power Dissipation Derating (Ta≥25°C,1 Circuit) ∆ Pc /°C -1.5(*-3.5) -1.0 mW /°C

Detector

Junction Temperature Tj 125 °C

Operating Temperature Range Topr −55~100 °C

Storage Temperature Range Tstg −55~125 °C

Lead Soldering Temperature (10s) Tsold 260(10sec) °C

Total Package Power Dissipation PT 250(*320) 150 mW

Total Package Power Dissipation Derating (Ta≥25°C,1 Circuit) ∆ PT/°C -2.5(*-3.2) -1.5 mW /°C

Isolation Voltage (AC,1min. , R.H.≤60%) (Note1) BV

S 5000 V r m s

*IF=20mA Max

Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the

significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even

if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum

ratings.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook

(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test

report and estimated failure rate, etc).

(Note1)Device considered a two terminal device : LED side pins Shorted together and DETECTOR side pins shorted

together.

Recommended Operating Conditions

Characteristics Symbol Min. Typ. Max. Unit

Supply Voltage VCC — — 200 V

Forward Current IF — 16 25 mA

Collector Current IC — — 120 mA

Operating Temperature Topr −25 — 85 °C

Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the

device. Additionally, each item is an independent guideline respectively. In developing designs using this

product, please confirm specified characteristics shown in this document.

TLP627,TLP627-2,TLP627-4

2007-10-01 3

Individual Electrical Characteristics (Ta=25°C)

Characteristics Symbol Test Condition Min. Typ. Max. Unit

Forward Voltage VF IF = 10 mA 1.0 1.15 1.3 V

Reverse Current IR V

R = 5 V — — 10 μA

LED

Capacitance CT V = 0 , f=1MHz — 30 — pF

Collector-Emitter

Breakdown Voltage V(BR)CEO IC = 0.1mA 300 — — V

Emitter-Collector

Breakdown Voltage V(BR)ECO IE = 0.1mA 0.3 — — V

VCE = 200V — 10 200 nA

Collector Dark Current ICEO

VCE = 200V , Ta = 85°C — — 20 μA

Detector

Capacitance Collector

to Emitter CCE V=0 , f=1MHz — 10 — pF

Coupled Electrical Characteristics (Ta=25°C)

Characteristics Symbol Test Condition Min. Typ. Max. Unit

Current Transfer Ratio IC/IF IF=1mA , VCE=1V 1000 4000 — %

Saturated CTR IC/IF(sat) IF=10mA , VCE=1V 500 — — %

IC=10mA , IF=1mA — — 1.0

Collector-Emitter

Saturation Voltage VCE(sat)

IC=100mA , IF=10mA 0.3 — 1.2

Isolation Electrical Characteristics (Ta=25°C)

Characteristics Symbol Test Condition Min. Typ. Max. Unit

Capacitance Input to Output CS VS=0 , f=1MHz — 0.8 — pF

Isolation Resistance RS V

S=500V , R.H.≤60% 5×1010 1014 — Ω

AC, 1minute 5000 — —

AC, 1second, in oil — 10000 —

Vrms

Isolation Voltage BVs

DC, 1 minute, in oil — 10000 — Vdc

TLP627,TLP627-2,TLP627-4

2007-10-01 4

Switching Characteristics (Ta=25°C)

Characteristics Symbol Test Condition Min. Typ. Max. Unit

Rise Time tr — 40 —

Fall Time tf — 15 —

Turn-on Time ton — 50 —

Turn-off Time toff

VCC=10V

IC=10mA

RL=100Ω

— 15 —

Turn-on Time tON — 5 —

Strage Time ts — 40 —

Turn-off Time tOFF

RL=180Ω (Fig.1)

VCC=10V , IF=16mA

— 80 —

μs

Fig.1 Switching Ti me Test Circuit

VCC

VCE

tON

tOFF

VCE VCC

TLP627,TLP627-2,TLP627-4

2007-10-01 5

TLP627,TLP627-2,TLP627-4

2007-10-01 6

TLP627,TLP627-2,TLP627-4

2007-10-01 7

TLP627,TLP627-2,TLP627-4

2007-10-01 8

RESTRICTIONS ON PRODUCT USE

• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information

in this document, and related hardware, software and systems (collectively “Product”) without notice.

• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with

TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.

• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are

responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and

systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily

injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must

also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,

the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA

Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are

solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the

appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any

information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other

referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA A SSUMES NO

LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.

• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring

equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.

Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or

reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious

public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used

in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling

equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric

power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this

document.

• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any

applicable laws or regulations.

• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any

infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to

any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY

WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR

LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND

LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO

SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

• GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or

vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.

• Do not use or otherwise make available Product or related software or technology for any military purposes, including without

limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile

technology products (mass destruction weapons). Product and related software and technology may be controlled under the

Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product

or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.

• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.

Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,

including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of

noncompliance with applicable laws and regulations.