GN (AGN) TESTING High Sensitivity of nominal operating power 100mW is achieved. Compact Slim Body Saves space GN RELAYS (AGN) FEATURES 1. Compact slim body saves space Thanks to the small surface area of 5.7 mm x 10.6 mm .224 inch x .417 inch and low height of 9.0 mm .354 inch, the packaging density can be increased to allow for much smaller designs. 2. High sensitivity single side stable type (Nominal operating power: 100mW) is available 3. Outstanding surge resistance. Surge breakdown voltage between contacts and coil: 2,500 V 2x10 s (Telcordia) Surge breakdown voltage between open contacts: 1,500 V 10x160 s (FCC part 68) 4. The use of twin crossbar contacts ensures high contact reliability. AgPd contact is used because of its good sulfide resistance. Adopting lowgas molding material. Coil assembly molding technology which avoids generating volatile gas from coil. 5. Increased packaging density Due to highly efficient magnetic circuit design, leakage flux is reduced and changes in electrical characteristics from components being mounted RoHS compliant close-together are minimized. This all means a packaging density higher than ever before. 6. Nominal operating power: 140 mW 7. Outstanding vibration and shock resistance. Functional shock resistance: 750 m/s2 Destructive shock resistance: 1,000 m/s2 Functional vibration resistance: 10 to 55 Hz (at double amplitude of 3.3 mm .130 inch) Destructive vibration resistance: 10 to 55 Hz (at double amplitude of 5 mm .197 inch) 8. Sealed construction allows automatic washing. TYPICAL APPLICATIONS 1. Telephone switchboard 2. Telecommunications equipment 3. Security 4. Measurement equipment 5. Consumer electronic and audio visual equipment ORDERING INFORMATION AGN 2 0 Contact arrangement 2: 2 Form C Operating function 0: Single side stable 1: 1 coil latching 6: High sensitivity single side stable type Type of operation 0: Standard type (B.B.M.) Terminal shape Nil: Standard PC board terminal A: Surface-mount terminal A type S: Surface-mount terminal S type Nominal coil voltage (DC) 1H: 1.5V 03: 3V 4H: 4.5V 06: 6V 09: 9V 12: 12V 24: 24V Packing style Nil: Tube packing X: Tape and reel packing (picked from 1/2/3/4 pin side) Z: Tape and reel packing (picked from 5/6/7/8 pin side) Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e ASCTB13E 201201-T GN (AGN) TYPES 1. Standard PC board terminal Nominal coil voltage 1.5V DC 3V DC 4.5V DC 6V DC 9V DC 12V DC 24V DC Single side stable Part No. AGN2001H AGN20003 AGN2004H AGN20006 AGN20009 AGN20012 AGN20024 1 coil latching Part No. AGN2101H AGN21003 AGN2104H AGN21006 AGN21009 AGN21012 AGN21024 High sensitivity single side stable Part No. AGN2601H AGN26003 AGN2604H AGN26006 AGN26009 AGN26012 AGN26024 Single side stable Part No. AGN2001H AGN20003 AGN2004H AGN20006 AGN20009 AGN20012 AGN20024 1 coil latching Part No. AGN2101H AGN21003 AGN2104H AGN21006 AGN21009 AGN21012 AGN21024 High sensitivity single side stable Part No. AGN2601H AGN26003 AGN2604H AGN26006 AGN26009 AGN26012 AGN26024 1 coil latching Part No. AGN2101HZ AGN21003Z AGN2104HZ AGN21006Z AGN21009Z AGN21012Z AGN21024Z High sensitivity single side stable Part No. AGN2601HZ AGN26003Z AGN2604HZ AGN26006Z AGN26009Z AGN26012Z AGN26024Z Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 2. Surface-mount terminal 1) Tube packing Nominal coil voltage 1.5V DC 3V DC 4.5V DC 6V DC 9V DC 12V DC 24V DC : For each surface-mounted terminal identification, input the following letter. A type: A, S type: S Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 2) Tape and reel packing Nominal coil voltage Single side stable Part No. AGN2001HZ AGN20003Z AGN2004HZ AGN20006Z AGN20009Z AGN20012Z AGN20024Z 1.5V DC 3V DC 4.5V DC 6V DC 9V DC 12V DC 24V DC : For each surface-mounted terminal identification, input the following letter. A type: A, S type: S Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs. Notes: 1. Tape and reel packing symbol "-Z" is not marked on the relay. "X" type tape and reel packing (picked from 1/2/3/4-pin side) is also available. 2. Please inquire if you require a relay, between 1.5 and 24 V DC, with a voltage not listed. RATING 1. Coil data 1) Single side stable type Nominal coil voltage Pick-up voltage (at 20C 68F) Drop-out voltage (at 20C 68F) Nominal operating current [10%] (at 20C 68F) Coil resistance [10%] (at 20C 68F) Nominal operating power Max. applied voltage (at 20C 68F) 140mW 150%V of nominal voltage 1.5V DC 93.8mA 16 3V DC 4.5V DC 6V DC 9V DC 12V DC 46.7mA 31mA 23.3mA 15.5mA 11.7mA 64.2 145 257 579 1,028 9.6mA 2,504 230mW 120%V of nominal voltage Coil resistance [10%] (at 20C 68F) Nominal operating power Max. applied voltage (at 20C 68F) 100mW 150%V of nominal voltage 75%V or less of nominal voltage* (Initial) 10%V or more of nominal voltage* (Initial) 24V DC 2) 1 coil latching type 1.5V DC Nominal operating current [10%] (at 20C 68F) 66.7mA 3V DC 4.5V DC 6V DC 9V DC 12V DC 24V DC 33.3mA 22.2mA 16.7mA 11.1mA 8.3mA 5.0mA Nominal coil voltage Set voltage (at 20C 68F) 75%V or less of nominal voltage* (Initial) Reset voltage (at 20C 68F) 75%V or less of nominal voltage* (Initial) 22.5 90 202.5 360 810 1,440 4,800 120mW *Pulse drive (JIS C 5442-1996) ASCTB13E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e GN (AGN) 3) High sensitivity single side stable type Nominal operating current [10%] (at 20C 68F) Coil resistance [10%] (at 20C 68F) 1.5V DC 66.7mA 22.5 3V DC 4.5V DC 6V DC 9V DC 12V DC 33.3mA 22.2mA 16.7mA 11.1mA 8.3mA 90 202.5 360 810 1,440 5.0mA 4,800 Nominal coil voltage Set voltage (at 20C 68F) Reset voltage (at 20C 68F) 80%V or less of nominal voltage* (Initial) 10%V or more of nominal voltage* (Initial) 24V DC Nominal operating power Max. applied voltage (at 20C 68F) 100mW 150%V of nominal voltage 120mW 120%V of nominal voltage *Pulse drive (JIS C 5442-1996) 2. Specifications Characteristics Contact Rating Item Arrangement Initial contact resistance, max. Contact material Nominal switching capacity Max. switching power Max. switching voltage Max. switching current Min. switching capacity (Reference value)*1 Single side stable Nominal operating High sensitivity single side power stable type 1 coil latching Specifications 2 Form C Max. 100 m (By voltage drop 6 V DC 1A) Stationary contact: AgPd+Au clad Movable contact: AgPd 1 A 30 V DC, 0.3 A 125 V AC (resistive load) 30 W (DC), 37.5 V A (AC) (resistive load) 110 V DC, 125 V AC 1A 10A 10 mV DC 140mW (1.5 to 12 V DC), 230mW (24 V DC) 100mW (1.5 to 12 V DC), 120mW (24 V DC) Min. 1,000M (at 500V DC) Measurement at same location as "Initial breakdown voltage" section. 750 Vrms for 1min. (Detection current: 10mA) 1,500 Vrms for 1min. (Detection current: 10mA) 1,000 Vrms for 1min. (Detection current: 10mA) 1,500 V (10x160s) (FCC Part 68) 2,500 V (2x10s) (Telcordia) Max. 50C (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 1A.) Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode) Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10s.) Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10s.) 10 to 55 Hz at double amplitude of 5 mm Min. 5 x 107 (at 180 cpm) Min. 105 (1 A 30 V DC resistive), 105 (0.3 A 125 V AC resistive) (at 20 cpm) Ambient temperature: (Single side stable, 1 coil latching type) -40C to +85C -40F to +185F (High sensitivity single side stable type) -40C to +70C -40F to +158F Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 20 cpm Approx. 1 g .035 oz Insulation resistance (Initial) Breakdown voltage (Initial) Electrical characteristics Surge breakdown voltage (Initial) Between open contacts Between contact and coil Between contact sets Between open contacts Between contacts and coil Temperature rise (at 20C 68F) Operate time [Set time] (at 20C 68F) Release time [Reset time] (at 20C 68F) Mechanical characteristics Expected life Conditions Functional Destructive Functional Vibration resistance Destructive Mechanical Electrical Shock resistance Conditions for operation, transport and storage*2 Max. operating speed (at rated load) Unit weight Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 24). REFERENCE DATA 1. Max. switching capacity 2. Life curve 3. Mechanical life Tested sample: AGN2004H, 15 pcs. Operating speed: 180 cpm 1.0 0.3 4 3.5 Pick-up voltage Max. 50 40 3 30 DC 30V resistive load 20 Voltage, V DC resistive load AC resistive load No. of operations, x 104 Switching current, A 100 Min. 2.5 2 Drop-out voltage Max. 1.5 Min. AC 125V resistive load 10 1 0.5 30 100 Contact voltage, V Panasonic Corporation 0 0.2 0.4 0.6 0.8 1.0 1.2 0 0 Switching current, A Automation Controls Business Unit industrial.panasonic.com/ac/e 10 30 50 No. of operations, x104 ASCTB13E 201201-T GN (AGN) 4. Electrical life (1A 30V DC resistive load) 5. Coil temperature rise Tested sample: AGN2004H, 6 pcs. Operating speed: 20 cpm Tested sample: AGN2004H, AGN20024, 6 pcs. Point measured: Inside the coil Ambient temperature: Room temperature Change of contact resistance 100 90 90 80 Pick-up voltage 70 Max. Min. 60 50 Drop-out voltage 40 Max. 30 80 70 60 50 X X 40 30 Min. 20 70 N.C. contact N.O. contact Temperature rise, C 100 Contact resistance, m Ratio against the rated voltage, %V Change of pick-up and drop-out voltage 1A 0A 40 1A 0A 30 20 10 10 5 50 20 10 0 0 4.5V DC type 24V DC type 60 0 0 10 5 0 10 100 110 No. of operations, x104 No. of operations, x104 120 130 140 150 Coil applied voltage, % 6-(1). Operate and release time (without diode) 6-(2). Operate and release time (with diode) 7. Ambient temperature characteristics Tested sample: AGN2004H, 6 pcs. Tested sample: AGN2004H, 6 pcs. Tested sample: AGN2004H, 6 pcs. 2.5 Max. 2 Min. 1.5 1 Max. Min. Operate time Release time 2.5 Max. Drop-out voltage -40 -20 0 2 1.5 Min. Max. Min. Pick-up voltage 1 0.5 0.5 0 0 50 Rate of change, %V 3 Operate time Release time Operate and release time, ms Operate and release time, ms 3 40 30 20 x x 10 20 40 60 80 100 -10 Ambient temperature, C -20 -30 -40 80 90 100 110 120 80 90 Coil applied voltage, %V 100 110 -50 120 Coil applied voltage, %V 9-(1). Influence of adjacent mounting 9-(2). Influence of adjacent mounting Tested sample: AGN2004H Tested sample: AGN20012, 6 pcs. Tested sample: AGN20012, 6 pcs. 1,000m/s Deenergized condition Energized condition X 1,000m/s2 Z 1,000m/s2 1,000m/s2 Z' 1,000m/s2 X' 1,000m/s2 Y' 10 5 ON Pick-up voltage 0 -5 ON -10 10 OFF 5 OFF Drop-out voltage 0 OFF -5 -10 0 DIMENSIONS (mm inch) ON Rate of change, %V Y 2 Rate of change, %V Z X X' Rate of change, %V Z' Y Y' Rate of change, %V 8. Malfunctional shock CAD Data 5 ON Pick-up voltage 0 ON -5 ON -10 10 OFF 5 Drop-out voltage 0 OFF -5 -10 0 2 4 6 8 10 12 .079 .157 .236 .315 .394 .472 Inter-relay distance , mm inch The CAD data of the products with a 10 OFF 2 4 6 8 10 12 .079 .157 .236 .315 .394 .472 Inter-relay distance , mm inch mark can be downloaded from: http://industrial.panasonic.com/ac/e 1. PC board terminal External dimensions CAD Data PC board pattern Schematic (Bottom view) Standard type 7.60 .299 5.700.3 .224.012 10.600.3 .417.012 3.20 .126 3.20 .126 (0.50) 9.000.3 (.020) .354.012 0.400.1 .016.004 (1.50) (.059) ASCTB13E 201201-T 3.500.3 .138.012 2.200.15 .087.006 3.200.15 .126.006 Panasonic Corporation 0.250.1 .010.004 3.200.15 .126.006 0.85 dia. .033 dia. 2.20 .087 Tolerance: 0.1 .004 Automation Controls Business Unit Single side stable High sensitivity single side stable 1 2 3 4 8 7 6 5 1 coil latching 1 2 3 4 8 7 6 5 Direction indication Direction indication (Deenergized condition) (Reset condition) industrial.panasonic.com/ac/e GN (AGN) 2. Surface-mount terminal CAD Data Suggested mounting pad (Tolerance: 0.1 .004) Single side stable/1 coil latching/High sensitivity single side stable External dimensions Single side stable/1 coil latching/High sensitivity single side stable Type 5.700.3 .224.012 10.600.3 .417.012 (0.50) 9.000.3 (.020) .354.012 Max. 10.00 .394 0.250.1 .010.004 A type 0.400.1 .016.004 (1.50) (.059) 0.80 .031 5.700.3 .224.012 2.25 .089 3.200.15 .126.006 2.200.15 .087.006 3.200.15 .126.006 0.400.1 .016.004 (1.50) (.059) 2.20 .087 3.20 .126 (0.50) 9.000.3 (.020) .354.012 Max. 10.00 .394 0.250.1 .010.004 5.30 .209 7.400.3 .291.012 10.600.3 .417.012 S type 3.10 .122 3.200.15 .126.006 2.200.15 .087.006 3.200.15 .126.006 2.20 .087 3.20 .126 4.45 .175 0.80 .031 5.700.3 .224.012 Schematic (Top view) Single side stable High sensitivity single side stable 8 7 6 5 1 2 3 4 1 coil latching 8 7 6 5 1 2 3 4 Direction indication Direction indication (Deenergized condition) (Reset condition) NOTES 1. Packing style 1) The relay is packed in a tube with the relay orientation mark on the left side, as shown in the figure below. (S type) (1)-2 Tape dimensions Relay polarity bar (Z type) 1.50 +0.1 0 dia. .059 +.004 dia. 0 2.00 .079 4.00 2.0 dia. .157 .079 dia. 1.75 .069 Orientation (indicates PIN No.1)stripe 10.700.2 .421.008 0.40 .016 11.50 .453 24.000.3 .945.012 11.10 .437 GN relays 16.00 .630 6.3 .248 Tape coming out direction General tolerance 0.1 mm .004 inch Stopper (green) Stopper (red) (2) Dimensions of plastic peel 2) Tape and reel packing (A type) (1)-1 Tape dimensions mm inch mm inch Relay polarity bar (Z type) 0.40 .016 4.00 .157 2.00 .079 1.50 +0.1 0 dia. .059 +.004 dia. 0 11.50 .453 1.75 .069 11.10 .437 10.700.2 .421.008 GN relays 2.00 dia. .079 dia. 16.00 .630 2. Automatic insertion To maintain the internal function of the relay, the chucking pressure should not exceed the values below. Chucking pressure in the direction A: 4.9 N {500gf} or less Chucking pressure in the direction B: 9.8 N {1 kgf} or less Chucking pressure in the direction C: 9.8 N {1 kgf} or less A C B 2.0 .079 13 dia. .512 dia. 21 dia. .827 dia. 24.000.3 .945.012 8.00 .315 Tape coming out direction General tolerance 0.1 mm .004 inch 380 dia. 14.961 dia. 80 dia. 3.150 dia. Please chuck the portion. Avoid chucking the center of the relay. In addition, excessive chucking pressure to the pinpoint of the relay should be avoided. For general cautions for use, please refer to the "Cautions for use of Signal Relays" or "General Application Guidelines". Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e ASCTB13E 201201-T