© 2008 IXYS All rights reserved 1 - 2
MMO 230
IXYS reserves the right to change limits, test conditions and dimensions. 20080806a
IRMS = 230 A
VRRM = 800 - 1800 V
AC Controller Modules
ECO-PAC 2
Features
• Thyristor controller for AC (circuit W1C
acc. to IEC) for mains frequency
• Isolation voltage 3000 V~
• Planar glass passivated chips
• Low forward voltage drop
• Leads suitable for PC board
soldering
Applications
• Switching and control of single and
three phase AC circuits
• Light and temperature control
• Softstart AC motor controller
• Solid state switches
Advantages
• Easy to mount with two screws
• Space and weight savings
• Improved temperature and power
cycling
• High power density
• Small and light weight
Symbol Conditions Maximum Ratings
IRMS TC = 85°C; 50-400 Hz (per single controller) 230 A
ITRMS 180 A
ITAVM TC = 85°C; 180° sine 105 A
ITSM TVJ = 45°C; VR = 0 V; t = 10 ms (50 Hz), sine 2250 A
t = 8.3 ms (60 Hz), sine 2400 A
TVJ = 125°C; VR = 0 V; t = 10 ms (50 Hz), sine 2000 A
t = 8.3 ms (60 Hz), sine 2150 A
I2dt TVJ = 45°C; VR = 0 V; t = 10 ms (50 Hz), sine 25300 A2s
t = 8.3 ms (60 Hz), sine 23900 A2s
TVJ = 125°C; VR = 0 V; t = 10 ms (50 Hz), sine 20000 A2s
t = 8.3 ms (60 Hz), sine 19100 A2s
(di/dt)cr TVJ = 125°C; repetitive, IT = 250 A 150 A/µs
f = 50 Hz; tP = 200 μs;
VD = 2/3VDRM;
IG = 0.45 A non repetitive, IT = ITAVM 500 A/µs
diG/dt = 0.45 A/μs;
(dv/dt)cr TVJ = 125°C; VDR = 2/3VDRM 1000 V/µs
RGK = ∞, method 1 (linear voltage rise)
PGM TVJ = 125°C; tP = 30 ms ≤ 10 W
IT = ITAVM;t
P = 300 ms ≤ 5 W
PGAVM 0.5 W
VRGM 10 V
TVJ -40 ... + 125 °C
TVJM 125 °C
Tstg -40 ... + 125 °C
VISOL 50/60 Hz, RMS t = 1 min 3000 V ~
IISOL < 1 mA t = 1 s 3600 V ~
MdMounting torque (M4) 1.5 - 2.0 Nm
14 - 18 lb.in.
Weight typ. 26 g
Preliminary Data
VRSM VRRM
VDSM VDRM Type
VV
900 800 MMO230-08io7
1300 1200 MMO230-12io7
1500 1400 MMO230-14io7
1700 1600 MMO230-16io7
1900 1800 MMO230-18io7
Data according to IEC 60747 refer to a single thyristor unless otherwise stated
AC1
K10
L9
VX18
http://store.iiic.cc/
© 2008 IXYS All rights reserved 2 - 2
MMO 230
IXYS reserves the right to change limits, test conditions and dimensions. 20080806a
Component
Symbol Conditions Characteristic Values
min. typ. max.
ID, IRTVJ = 125°C; VR = VRRM; VD = VDRM 5mA
VTIT = 300 A; TVJ = 25°C 1.5 V
VTO For power-loss calculations only 0.8 V
rT2.4 mΩ
VGT VD = 6 V; TVJ = 25°C 1.5 V
TVJ = -40°C 1.6 V
IGT VD = 6 V; TVJ = 25°C 150 mA
TVJ = -40°C 200 mA
VGD TVJ = 125°C; VD = 2/3VDRM 0.2 V
IGD TVJ = 125°C; VD = 2/3VDRM 10 mA
ILTVJ = 25°C; tP = 10 ms 450 mA
IG = 0.45 A; diG/dt = 0.45 A/μs
IHTVJ = 25°C; VD = 6 V; RGK = ∞200 mA
tgd TVJ = 25°C; VD = ½ VDRM 2μs
IG = 0.45 A; diG/dt = 0.45 A/μs
RthJC per Thyristor; DC 0.26 K/W
per module 0.13 K/W
RthCH per Thyristor; DC 0,2 K/W
per module 0,1 K/W
dSCreeping distance on surface 11.2 mm
dACreeping distance in air 5.0 mm
aMax. allowable acceleration 50 m/s2
Dimensions in mm (1 mm = 0.0394")
http://store.iiic.cc/
