SSM6K202FE TOSHIBA Field-Effect Transistor Silicon N-Channel MOS Type SSM6K202FE High-Speed Switching Applications Power Management Switch Applications * * 1.8 V drive Low ON-resistance: Unit: mm Ron = 145 m (max) (@VGS = 1.8V) Ron = 101 m (max) (@VGS = 2.5V) Ron = 85 m (max) (@VGS = 4.0V) Absolute Maximum Ratings (Ta = 25C) Characteristic Symbol Rating Unit Drain-source voltage VDS 30 V Gate-source voltage VGSS 12 V DC ID 2.3 Pulse IDP 4.6 PD (Note 1) 500 Drain current Drain power dissipation A mW Channel temperature Tch 150 C Storage temperature Tstg -55 to 150 C Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Mounted on an FR4 board 2 (25.4 mm x 25.4 mm x 1.6 t, Cu Pad: 645 mm ) 1, 2, 5, 6 : Drain Note: ES6 3 : Gate 4 : Source JEDEC JEITA 2-2N1A TOSHIBA Weight: 3 mg (typ.) Electrical Characteristics (Ta = 25C) Characteristic Drain-source breakdown voltage Symbol Test Condition Min Typ. Max Unit V (BR) DSS ID = 1 mA, VGS = 0 30 V V (BR) DSX ID = 1 mA, VGS = -12 V 18 V Drain cutoff current IDSS VDS = 30 V, VGS = 0 1 A Gate leakage current IGSS VGS = 12 V, VDS = 0 1 A Vth VDS = 3 V, ID = 1 mA 0.4 1.0 V Forward transfer admittance Yfs VDS = 3 V, ID = 1.5 A (Note2) 3.9 7.8 S ID = 1.5 A, VGS = 4.0 V (Note2) 66 85 Drain-source ON-resistance RDS (ON) ID = 1.0 A, VGS = 2.5 V (Note2) 78 101 ID = 0.5 A, VGS = 1.8 V (Note2) 95 145 270 pF Gate threshold voltage Input capacitance Ciss VDS = 10 V, VGS = 0, f = 1 MHz m Output capacitance Coss VDS = 10 V, VGS = 0, f = 1 MHz 56 pF Reverse transfer capacitance Crss VDS = 10 V, VGS = 0, f = 1 MHz 47 pF ton VDD = 10 V, ID = 2 A, 20 toff VGS = 0 to 2.5 V, RG = 4.7 31 - 0.85 - 1.2 Switching time Turn-on time Turn-off time Drain-source forward voltage VDSF ID = - 2.3 A, VGS = 0 V (Note2) ns V Note 2: Pulse test 1 2007-11-01 SSM6K202FE Switching Time Test Circuit (a) Test Circuit (b) VIN 2.5 V OUT 2.5 V 0V RG 0 10 s (c) VOUT VDD VDD = 10 V RG = 4.7 D.U. < = 1% VIN: tr, tf < 5 ns Common Source Ta = 25C Marking 6 90% IN 10% VDD VDS (ON) 10% 90% tr ton tf toff Equivalent Circuit (top view) 5 4 6 5 4 3 1 2 3 KL 1 2 Notice on Usage Vth can be expressed as the voltage between gate and source when the low operating current value is ID = 1 mA for this product. For normal switching operation, VGS (on) requires a higher voltage than Vth and VGS (off) requires a lower voltage than Vth. (The relationship can be established as follows: VGS (off) < Vth < VGS (on).) Take this into consideration when using the device. Handling Precaution When handling individual devices that are not yet mounted on a circuit board, make sure that the environment is protected against electrostatic discharge. Operators should wear antistatic clothing, and containers and other objects that come into direct contact with devices should be made of antistatic materials. 2 2007-11-01 SSM6K202FE ID - VDS ID - VGS 5 10 4.0 V 2.5 V Common Source ID 1.8 V 1 3 0.1 Drain current Drain current VDS = 3 V (A) 4 ID (A) 10 V 2 VGS = 1.5 V Ta = 100 C 0.01 1 25 C - 25 C 0.001 Common Source Ta = 25C 0 0 0.2 0.4 0.8 0.6 Drain-source voltage VDS 0.0001 0 1 (V) 1.0 Gate-source voltage RDS (ON) - VGS ID = 0.5 A Common Source Common Source Ta = 25C Drain-source ON-resistance RDS (ON) (m) Drain-source ON-resistance RDS (ON) (m) (V) 200 Ta = 25C 150 100 Ta = 100 C 25 C 50 - 25 C 0 2 6 4 Gate-source voltage 8 VGS 150 100 1.8 V 2.5 V 50 0 10 VGS = 4.0 V 0 1 (V) 3 2 Drain current RDS (ON) - Ta 4 ID 5 (A) Vth - Ta 1.0 300 Vth (V) Common Source 250 200 Gate threshold voltage Drain-source on-resistance RDS (ON) (m) VGS RDS (ON) - ID 200 0 2.0 0.5 A / 1.8 V 150 1.0 A / 2.5 V 100 ID = 1.5 A / VGS = 4.0 V 50 0 -50 0 50 Ambient temperature 100 Ta 0.5 Common source VDS = 3 V ID = 1 mA 0 -50 150 (C) 0 50 Ambient temperature 3 100 Ta 150 (C) 2007-11-01 SSM6K202FE IDR - VDS |Yfs| - ID 10 10 VGS = 0 V (A) IDR 3 Drain reverse current Forward transfer admittance Yfs (S) Common Source 1 0.3 Common Source VDS = 3 V Ta = 25C 0.1 0.01 1 0.1 Drain current ID Ta = 25C 1 IDR G S 0.1 Ta =100 C 25 C 0.01 -25 C 0.001 0 10 D -0.2 (A) -0.4 Drain-source voltage Common Source VDD = 10 V VGS = 0 to 2.5 V Ta = 25C RG = 4.7 (ns) toff 300 100 tf t Ciss Switching time C (pF) 500 Capacitance (V) 1000 1000 100 30 VDS -1.0 t - ID C - VDS 50 -0.8 -0.6 Common Source Ta = 25C f = 1 MHz VGS = 0 V 10 0.1 Coss Crss 10 ton tr 1 10 Drain-source voltage 1 0.01 100 VDS (V) 0.1 Drain current 1 ID 10 (A) PD - Ta Mounted on an FR4 board 2 (25.4 x 25.4 x 1.6 mm Cu Pad : 645 mm ) PD - Ta 800 Drain Power Dissipation PD (mW) 1000 600 400 200 0 -40 -20 0 20 40 60 80 Ambient temperature 100 120 140 160 Ta (C) 4 2007-11-01 SSM6K202FE RESTRICTIONS ON PRODUCT USE * Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2007-11-01