
SPEC NO: DSAC2351 REV NO: V.6 DATE: MAY/23/2007 PAGE: 2 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1102000020
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Note:
1.Wavelength: +/-1nm.
Notes:
1. 2mm below package base.
2. 5mm below package base.
Part No. Dice Lens Type
iewing
Angle [1]
Min. Typ. 2θ1/2
AM2520EH/YD5V Yellow (GaAsP/GaP) YELLOW DIFFUSED 1 3 40°
Iv (mcd) [2]
V= 5V
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Yellow 590 nm VF=5V
λD [1] Dominant Wavelength Yellow 588 nm VF=5V
Δλ1/2 Spectral Line Half-width Yellow 35 nm VF=5V
IF Forward Current Yellow 13 17.5 mA VF=5V
IR Reverse Current Yellow 10 uA VR = 5V
Parameter Yellow Units
Power dissipation 85 mW
Forward Voltage 6 V
Reverse Voltage 5 V
Operating Temperature -40°C To +70°C
Storage Temperature -40°C To +85°C
Lead Solder Temperature [1] 260°C For 3 Seconds
Lead Solder Temperature [2] 260°C For 5 Seconds