9AD type ACDC Fan Features High Airflow and High Static Pressure These fans deliver a maximum airflow of 23 m3/min and a maximum static pressure of 815 Pa, both of which are leading in the industry.* Compared with the current model,** the maximum airflow has increased approximately 3.6 times and maximum static pressure has increased approximately 4 times. No DC Power Supply Needed With an embedded AC-DC converter, these fans can be driven by an AC power supply. This eliminates the need for a high-capacity DC power supply, reducing the overall costs. High Energy Efficiency and Low Noise The PWM control function enables the external control of fan speed, contributing to lowering noise and improving energy efficiency of devices. * Specification of model no. 9ADTS11P0G001, 9ADTS23P0G001. ** Current model: San Ace 172 o172 x 51 mm axial AC fan (model no. 109-314). 225 x 99 mm o Specifications When the optional inlet nozzle (109-1134) is mounted. The models listed below have pulse sensors with PWM control function. Model no. Operating Rated voltage voltage range [V] [V] 9ADTS11P0G001 115 90 to 132 9ADTS11P0F001 9ADTS23P0G001 230 180 to 264 9ADTS23P0F001 PWM Max. airflow Max. static pressure SPL duty cycle* Rated current Rated input Rated speed [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB(A)] [%] 100 3.6 155 3200 23.0 812 815 3.27 74 20 0.3 10 1000 7.1 252 80 0.32 50 100 1.6 70 2450 17.6 621 480 1.93 68 20 0.3 10 1000 7.1 252 80 0.32 50 100 2.0 155 3200 23.0 812 815 3.27 74 20 0.2 10 1000 7.1 252 80 0.32 50 100 0.9 70 2450 17.6 621 480 1.93 68 20 0.2 10 1000 7.1 252 80 0.32 50 Operating Expected temperature life [C] [h] -20 to +60 40000/40C * PWM frequency: 1 kHz. Fan does not rotate when PWM duty cycle is 0%. Common Specifications Material Motor case: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-0) Expected life Refer to specifications (L10 life: 90% survival rate for continuous operation in free air at 40C, rated voltage) Motor protection function Burnout protection function at locked rotor condition Dielectric strength 50/60 Hz, 1,500 VAC, for 1 minute (between lead wire conductors and motor case) Insulation resistance 10 M or more with a 500 VDC megger (between lead wire conductors and motor case) Sound pressure level (SPL) At 1 m away from the air inlet Operating temperature Refer to specifications (Non-condensing) Storage temperature -30 to +70C (Non-condensing) Lead wire AC power input L: OrangeN: GrayGround Yellow / Green +10 VDC output Red BlackSensor Yellow Control Brown Mass Approx. 1800 g Airflow - Static Pressure Characteristics PWM duty cycle (inch H2O) (inch H2O) (Pa) 4.0 1000 800 115 VAC 50/60 Hz PWM duty cycle 60% 600 115 VAC 50/60 Hz PWM duty cycle 20% 2.0 400 1.0 Static pressure Static pressure 3.0 115 VAC 50/60 Hz PWM duty cycle 100% 200 0 0 0 5 10 15 20 25 30 (m3/min) 200 400 600 800 1000 (CFM) (Pa) 2.4 600 2.0 500 1.6 400 1.2 300 0.8 200 0.4 100 0 0 115 VAC 50/60 Hz PWM duty cycle 100% 115 VAC 50/60 Hz PWM duty cycle 60% 115 VAC 50/60 Hz PWM duty cycle 20% 0 5 200 Airflow 4.0 1000 2.4 230 VAC 50/60 Hz PWM duty cycle 100% 230 VAC 50/60 Hz PWM duty cycle 60% 600 Static pressure Static pressure 3.0 230 VAC 50/60 Hz PWM duty cycle 20% 2.0 400 1.0 200 0 0 0 20 600 25 (m3/min) 800 (CFM) 9ADTS11P0F001 (inch H2O) (Pa) 800 15 Airflow 9ADTS11P0G001 (inch H2O) 10 400 5 10 15 20 25 30 (m3/min) 200 400 600 800 1000 (CFM) (Pa) 600 2.0 500 1.6 400 1.2 300 0.8 200 0.4 100 0 0 230 VAC 50/60 Hz PWM duty cycle 100% 230 VAC 50/60 Hz PWM duty cycle 60% 230 VAC 50/60 Hz PWM duty cycle 20% 0 5 200 10 400 15 20 600 25 (m3/min) 800 Airflow Airflow 9ADTS23P0G001 9ADTS23P0F001 PWM Duty - Speed Characteristics Example (min-1) 4000 (min-1) Input voltage: 115 VAC 50/60 Hz 3000 230 VAC 50/60 Hz PWM frequency: 1 kHz Input voltage: 115 VAC 50/60 Hz 230 VAC 50/60 Hz PWM frequency: 1 kHz 2450 min-1 3200 min-1 3000 Speed Speed 2000 2000 1000 1000 0 100 (%) PWM duty cycle 9ADTS11P0G001 9ADTS23P0G001 0 PWM duty cycle 9ADTS11P0F001 9ADTS23P0F001 100 (%) (CFM) 225 x 99 mm o PWM Input Signal Example Input signal waveform VIH = 9.5 to 10.5 VVIL = 0 to 0.5 V VIH PWM duty cycle (%) = T1 x100 T T1 When the control terminal is open, fan speed is the same as when PWM duty cycle is 100%. Either TTL input, open collector or open drain can be used for PWM control input signal. T Wiring example Inside of fan +10 V D TRANSFORMER 22 Iout=10 mA max. R C 47 k PHOTO COUPLER Sensor output S+ IC=10 mA max. 51 k 3 k PHOTO COUPLER PWM signal CTL+ SG C Specifications for Pulse Sensors Output circuit: Open collectorInternal pulled up to 5 V Output waveform In case of steady running (One revolution) T0 T1 VOL 0V 1 T Current source (Isource) = 5 mA max. (when control voltage is 0 V) Current sink (Isink) = 0.1 mA max. (when control voltage is 10 V) Control terminal voltage = 11.5 V max. (when control terminal is open) VIL VOH PWM frequency 1 (kHz) = T2 T3 T4 T1to41/4T0 T1to41/4T060/4Ns NFan speedmin-1 o5 (10) 90 45 8 Other lead wire AWG 24 UL 1430 +2 o225 -0 +2 o153 -0 0.3 Power lead wire AWG 20 UL 1430 (330) 991.5 871.5 Airflow direction +40 400 -0 Dimensions (unit: mm) 4-M4 Airflow direction o1421 Rotating direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet nozzle side 00 .5 0 .5 45 4-o4.5 o58 0.5 4-o4 .5 o2 0 10 o2 Fan side (3.5) Reference Diagram for Mounting Inlet nozzle (149) (125) Inlet nozzle (29.5) Finger guard Fan Fan Notice Bolt length: 6 mm max. Please read the "Safety Precautions" on our website before using the product. The products shown in this catalog are subject to Japanese Export Control Law. Diversion contrary to the law of exporting country is prohibited. For protecting fan bearings against electrolytic corrosion near strong electromagnetic noise sources, we provide effective countermeasures such as Electrolytic Corrosion Proof Fans and EMC guards. Contact us for details. 3-33-1 Minami-Otsuka, Toshima-ku, Tokyo 170-8451, Japan TEL: +81 3 5927 1020 https://www.sanyodenki.com The names of companies and/or their products specified in this catalog are the trade names, and/or trademarks and/or registered trademarks of such respective companies. "San Ace" is a trademark of SANYO DENKI CO.,LTD. CATALOG No. C1086B001 `18.10 Specifications are subject to change without notice.