INCH-POUND MS24524K 18 April 2011 SUPERSEDING MS24524J 28 September 1987 DETAIL SPECIFICATION SHEET SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED This specification is approved for use by all Departments and Agencies of the Department of Defense. The complete requirements for acquiring the switch described herein shall consist of this specification and the latest issue of MIL-DTL-3950. FIGURE1. Dimensions and configuration. AMSC N/A FSC 5930 MS24524K Inches mm Inches mm .005 .008 .012 .02 .03 .060 .076 .130 .138 .240 0.13 0.20 0.30 0.5 0.8 1.52 1.93 3.30 3.51 6.10 .25 .26 .38 .432 .469 .47 .69 .910 1.10 1.340 1.370 6.4 6.6 9.7 10.97 11.91 11.9 17.5 23.11 27.9 34.04 34.80 NOTES: 1. Dimensions are inches. 2. Metric equivalents are given for general information only. 3. Unless otherwise specified, tolerance is .020 (0.51 mm) for two place decimals and .005 (0.13 mm) for three place decimals. 4. For hardware and terminal screw detail specifications, see appendix of MIL-DTL-3950. 5. In event of a conflict between the text of this standard and the reference cited herein, the text of this standard shall take precedence. FIGURE 1 Dimensions and configuration - Continued. 2 MS24524K REQUIREMENTS All switches on this standard are designed so that the movement of the switch mechanism is opposite to that of the toggle lever Maximum weight is .12 pound. Thread length and hole depth should be such that screws will not bottom when tightened. Electrical rating: See table I. TABLE I Detail Requirements. Current capacity (amperes) 28 volts DC Circuit with Toggle Lever In MS part No. Keying side MS24524-21 1-2 On MS24524-22 Off MS24524-23 4-5 1-2 On 4-5 Center Opposite keying side Off 2-3 On 5-6 None 2-3 On 5-6 None 2-3 On 5-6 MS24524-24 None Off 2-3 On 5-6 MS24524-25 None Mom. 1-2 On 4-5 Mom. 1-2 On 4-5 Mom. 1-2 On 4-5 Mom. Off 2-3 On 5-6 Mom. Off None 2-3 On None Off MS24524-26 MS24524-27 MS24524-28 MS24524-29 MS24524-30 MS24524-31 Mom. 1-2 On 4-5 Mom. 1-2 On 4-5 None 2-3 On Off Off None 2-3 LampLoad circuit Resistiv e circuit Inductive circuit LampLoad circuit Resistive circuit Inductive circuit 7 20 15 4 15 15 5 18 10 2 11 8 7 20 15 4 15 15 5-6 Mom 2-3. On 5-6 Off Current capacity(amperes) 115 volts, 60 and 400 Hertz AC 5-6 On 5-6 MS24524-32 None 1-2 On 4-5 Mom. 2-3 On 5-6 MS24524-33 None 1-2 On 4-5 2-3 On 5-6 3 MS24524K Referenced documents MIL-DTL-3950 Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Army - CR Navy - AS Air Force - 85 DLA - CC Preparing activity DLA - CC (Project 5930-2011-045) Review activities Army - AR, AV, MI Navy - EC, MC Air Force - 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.daps.dla.mil/ . 4