MINIASMDC150F/16-2 - LITTELFUSE

POLY-FUSE® Resettable PTCs

Speciﬁcations are subject to change without notice.

Revised: BA.11/19/20

Surface Mount > Automotive miniASMDC Series

Automotive miniASMDC Series

RoHS

Additional Information

Datasheet Resources Samples

The miniASMDC is small-sized 1812 PPTC series, helping

to reduce weight of wire harnesses. PPTC devices

distributed in a circuit can allow the use of smaller wire

sizes with the resulting harnesses. Forego looping back

and forth around a fuse box and place your protection

wherever you see fit. The solid state composition of

PPTC devices helps provide reliability.

• Products meet applicable

automotive industry

standards

• Compatible with high-

volume electronics

assembly

• Small footprint – 1812 size

• Resettable solution against

overcurrent and short-

circuit

• AEC-Q200 qualiﬁed, RoHS

compliant, and

ISO/TS16949 certiﬁed

• Surface-mount form factor

• High Performance

• Expertise from the

world’s leading resettable

overcurrent protection

manufacturer

• Wide range of dedicated

automotive surface-mount

and radial-leaded resettable

overcurrent devices

• High performance transient

voltage protection devices

• High Performance

• Expertise from the world’s leading resettable overcurrent

protection manufacturer

• Wide range of dedicated automotive surface-mount and

radial-leaded resettable overcurrent devices

• High performance transient voltage protection devices

Features & Beneﬁts

Description

Applications

POLY-FUSE® Resettable PTCs

Speciﬁcations are subject to change without notice.

Revised: BA.11/19/20

Surface Mount > Automotive miniASMDC Series

Part

Number

IH(A)@ IH(A)@ ITVMAX IMAX PD Typ Max Time-to-trip RMIN RMAX R1MAX

(R1MAX) (RaMAX) (A) (VDC) (A) (W) (A) (s) (Ω) (Ω) (Ω)

miniASMDC – 12-60V

miniASMDC150F/12 1.50 1.50 2.80 12 100 0.80 8.00 0.50 0.04 0.11 0.11

miniASMDC150F/16 1.50 1.50 2.80 16 100 0.80 8.00 0.50 0.04 0.11 0.11

miniASMDC150F/24 1.50 1.50 3.00 24 20 1.00 8.00 1.50 0.04 0.12 0.12

miniASMDC200F/16 2.00 2.00 4.00 16 40 1.20 8.00 5.00 0.02 0.085 0.085

miniASMDC260F/12 2.60 2.60 5.00 12 10 0 1.00 8.00 5.00 0.015 0.047 0.047

miniASMDC260F/13.2 2.60 2.60 5.00 13.2 10 0 1.20 8.00 5.00 0.015 0.05 0.05

miniASMDC260F/16 2.60 2.60 5.00 16 10 0 1.20 8.00 5.00 0.015 0.05 0.05

miniASMDC010F 0.10 0.10 0.30 60 40 0.75 0.50 5.00 0.70 12.70 12.70

miniASMDC014F 0.14 0.14 0.28 60 10 0.75 8.00 0.01 1.50 6.00 6.00

miniASMDC020F 0.20 0.20 0.40 30 10 0.80 8.00 0.02 0.60 3.30 3.30

miniASMDC030F 0.30 0.30 0.60 30 40 0.80 8.00 0.10 0.20 1.75 1.75

miniASMDC050F 0.50 0.50 1.00 24 100 0.80 8.00 0.15 0.15 1.00 1.00

miniASMDC075F 0.75 0.75 1.50 13.2 100 1.00 8.00 0.20 0.11 0.45 0.45

miniASMDC075F/24 0.75 0.75 1.50 24 40 0.80 8.00 0.30 0.09 0.29 0.29

miniASMDC075F/33 0.75 0.75 1.60 33 100 1.00 8.00 1.00 0.11 0.39 0.39

miniASMDC110F/16 1.10 1.10 2.20 16 100 0.80 8.00 0.30 0.06 0.18 0.18

miniASMDC110F/24 1.10 1.10 2.20 24 20 0.80 8.00 0.50 0.06 0.18 0.18

miniASMDC125F/16 1.25 1.25 2.50 16 100 0.80 8.00 0.40 0.05 0.14 0.14

Typical Time-to-Trip Curves at 25°C

miniASMDC

A = miniASMDC010F, miniASMDC014F

B = miniASMDC020F

C = miniASMDC030F

D = miniASMDC050F

E = miniASMDC075F

F = miniASMDC075F/24

G = miniASMDC075F/33

H = miniASMDC110F/16

I = miniASMDC110F/24

J = miniASMDC125F/16

K = miniASMDC150F/12

L = miniASMDC150F/16

M = miniASMDC150F/24

N = miniASMDC200F/16

O = miniASMDC260F/12, miniASMDC260F/13.2,

miniASMDC260F/16

Time-to-Trip (s)

Fault Current (A)

10 0

0.1

0.01

0.001

10.1 10 010

Notes:

IH : Hold current: maximum current device will pass without interruption in 25°C, unless otherwise specified

IT : Trip current: minimum current that will switch the device from low-resistance to high-resistance in 25°C

still air, unless otherwise specified.

VMAX : Maximum voltage device can withstand without damage at rated current.

IMAX : Maximum fault current device can withstand without damage at rated voltage.

PD : Power dissipated from device when in the tripped state in 25°C still air, unless otherwise specified.

RMIN : Minimum resistance of device as supplied at 25°C, unless otherwise specified.

R1MAX : Maximum resistance of device when measured one hour post reflow, unless otherwise specified.

RaMAX : Maximum functional resistance of device after being subjected to the stresses described in PS400 at

25°C, unless otherwise specified.

Electrical Characteristics

POLY-FUSE® Resettable PTCs

Speciﬁcations are subject to change without notice.

Revised: BA.11/19/20

Surface Mount > Automotive miniASMDC Series

100

150

200

-40 -20 0 20 40 60 80 100 120

Ambient Temperature (°C)

% of Rated Hold and Trip Current

Temperature Rerating Curve

Maximum Ambient Temperature

Part Number -40°C -20°C 0°C 20°C 25°C 40°C 50°C 60°C 70°C 85°C

Hold Current (A)

miniASMDC – 12-60V

miniASMDC010F 0.17 0.15 0.13 0.11 0.10 0.09 0.08 0.07 0.06 0.04

miniASMDC014F 0.23 0.20 0.17 0.14 0.13 0.11 0.10 0.09 0.07 0.05

miniASMDC020F 0.30 0.27 0.23 0.20 0.19 0.17 0.15 0.13 0.12 0.09

miniASMDC030F 0.49 0.44 0.39 0.32 0.30 0.27 0.24 0.22 0.18 0.14

miniASMDC050F 0.59 0.57 0.55 0.50 0.48 0.45 0.43 0.35 0.30 0.23

miniASMDC075F 1.10 0.99 0.87 0.75 0.72 0.63 0.57 0.49 0.45 0.35

miniASMDC075F/24 1.50 1.25 1.00 0.75 0.73 0.65 0.60 0.55 0.50 0.43

miniASMDC075F/33 1.09 0.98 0.87 0.77 0.75 0.66 0.61 0.55 0.50 0.41

miniASMDC110F/16 1.68 1.49 1.30 1.10 1.05 0.92 0.83 0.75 0.64 0.50

miniASMDC110F/24 2.00 1.70 1.40 1.10 1.06 0.95 0.88 0.80 0.73 0.61

miniASMDC125F/16 2.00 1.69 1.47 1.25 1.17 1.03 0.92 0.90 0.69 0.53

miniASMDC150F/12 2.40 2.10 1.80 1.50 1.44 1.25 1.13 1.00 0.88 0.69

miniASMDC150F/16 2.40 2.10 1.80 1.50 1.44 1.25 1.13 1.00 0.88 0.69

miniASMDC150F/24 2.10 1.90 1.70 1.50 1.44 1.25 1.13 1.00 0.88 0.69

miniASMDC200F/16 3.07 2.74 2.40 2.07 2.00 1.74 1.57 1.40 1.24 0.99

miniASMDC260F/12 3.40 3.16 3.00 2.60 2.54 2.32 2.18 2.00 1.90 1.69

miniASMDC260F/13.2 3.40 3.16 3.00 2.60 2.54 2.32 2.18 2.00 1.90 1.69

miniASMDC260F/16 3.50 3.20 3.00 2.60 2.53 2.30 2.15 2.00 1.85 1.63

Typical Time-to-Trip Curves at 25°C

Physical Speciﬁcations

Terminal Pad Material 100% Matte Tin with Nickel Underplate

Soldering Characteristics Solderability per ANSI-J-STD-002 Category 3

Solder Heat Withstand per IEC 60068-2-20, Test Tb, Section 5,

Method 1a

Flammability per IEC 60695-11-5 Needle Flame

Test for 20 seconds

Recommended Storage

Conditions

40°C max, 70% RH max; Devices May Not

Meet Speciﬁed Ratings if Storage Conditions

are Exceeded

Operation Temperature -40°C to 85°C

Environmental Speciﬁcations

Test Conditions Resistance Change

Passive Aging 60°C, 1000 hrs

85°C, 1000 hrs

±3% Typical

±5% Typical

Humidity Aging 85°C, 85% R.H., 100 hrs ±1.2% Typical

Thermal Shock 85°C, -40°C 20 times -33% Typical

Solvent Resistance

Freon

Trichloroethane

Hydrocarbons

No change

Note: See PS400 for other physical speciﬁcations.

Note: See PS400 for other environmental speciﬁcations.

Moisture Resistance Level Level 2a, J-STD-020

Storage Conditions 40°C max, 70% RH max; devices should remain in original sealed bags prior to use.

Devices may not meet speciﬁed values if these storage conditions are exceeded.

POLY-FUSE® Resettable PTCs

Speciﬁcations are subject to change without notice.

Revised: BA.11/19/20

Surface Mount > Automotive miniASMDC Series

Dimension

Part Number

Dimensions in Millimeters (Inches)

Figure

A B C D E

Min Max Min Max Min Max Min Max Min Max

miniASMDC – 12-60V

miniASMDC010

4.37

(0.172)

4.73

(0.186)

0.635

(0.025)

0.89

(0.035)

3.07

(0.121)

3.41

(0.134)

0.25

(0.010)

0.95

(0.040)

0.20

(0.008) —

miniASMDC014F

miniASMDC020F

miniASMDC030F

miniASMDC050F

0.38

(0.015)

0.62

(0.025)

miniASMDC075F

miniASMDC075F/24

4.83

(0.190)

0.81

(0.032) 1.46

(0.057)

miniASMDC075F/33

4.73

(0.190)

0.94

(0.037)

miniASMDC110F/16

4.83

(0.190)

0.28

(0.011)

0.48

(0.019)

miniASMDC110F/24

0.81

(0.032)

1.46

(0.057)

miniASMDC125F/16

0.28

(0.011)

0.48

(0.019)

miniASMDC150F/12

miniASMDC150F/16

miniASMDC150F/24

1.00

(0.040)

1.94

(0.077)

miniASMDC200F/16

4.73

(0.186)

0.51

(0.020)

1.22

(0.048)

miniASMDC260F/12

4.83

(0.190)

1.02

(0.042)

1.52

(0.060)

miniASMDC260F/13.2

miniASMDC260F/16

Part

Number

Tape and Reel

Quantity

Standard

Package

Part

Marking

Recommended Pad Layout Figures [mm (in)]

Dimension A

(Min*/Nom)

Dimension B

(Nom)

Dimension C

(Nom)

miniASMDC – 12-60V

miniASMDC010F

2,000 10,000

3.15 (0.124) 1.68 (0.066) 3.10 (0.122)

miniASMDC014F 14

miniASMDC020F 2

miniASMDC030F 3

miniASMDC050F 5

miniASMDC075F 7

miniASMDC075F/24 1,500 7,500 075F 24V

miniASMDC075F/33 075F 33V

miniASMDC110F/16 2,000 10,000 110F 16V

miniASMDC110F/24 1,500 7,500 110F 24V

miniASMDC125F/16

2,000 10,000

125F 16V

miniASMDC150F/12 150F 12V

miniASMDC150F/16 150 16V

miniASMDC150F/24 1,000 5,000 150F 24V

miniASMDC200F/16 2,000 10,000 200F 16V

miniASMDC260F/12

1,500 7,500

260F 12V

miniASMDC260F/13.2 260F 13V

miniASMDC260F/16 260F 16V

Recommended Pad Layout

* These devices are intended for use in automotive applications.

POLY-FUSE® Resettable PTCs

Speciﬁcations are subject to change without notice.

Revised: BA.11/19/20

Surface Mount > Automotive miniASMDC Series

Solder Reﬂow Recommendations

Solder Reﬂow

• Recommended reﬂow method: IR, hot air, nitrogen.

• Recommended maximum paste thickness: 0.25mm (0.010in)

• Devices can be cleaned using standard methods and aqueous solvents.

• Experience has shown the optimum conditions for forming acceptable solder ﬁllets occur when a reasonable amount of solder paste is placed underneath

each device’s termination. As such, we request that customers comply with our recommended solder pad layouts.

• Customer should validate that the solder paste amount and reﬂow recommendations meet its application.

• We request that customer board layouts refrain from placing raised features (e.g. vias, nomenclature, traces, etc.) underneath PolySwitch devices. It is

possible that raised features could negatively impact solderability performance of our devices.

Rework

•

Standard industry practices. (Please also avoid direct contact to the device.)

Critical Zone

TL to Tp

Ramp Up

t 25˚C to Peak

Reﬂow Proﬁle Time

Ramp Down

Preheat

TsMAX

TsMIN

Temperature

Proﬁle Feature Pb-Free Assembly

Average ramp up rate (TsMAX to Tp) 3°C/s max

Preheat -

• Temperature min (TsMIN)150°C

• Temperature max (TsMAX)200°C

• Time (tsMIN to tsMAX)60-120 s

Time maintained above:

• Temperature (TL)217°C

• Time (tL)60-150 s

Peak/Classiﬁcation temperature (Tp) 260°C

Time within 5°C of actual peak temperature

Time (tp) 30 s max

Ramp down rate 3°C/s max

Time 25°C to peak temperature 8 min max

miniASMDC 075 F /24 -2

Packaging

2 = Tape and Reel

Alternative Voltage Rating (If Applicable)

Lead Free

Hold Current Indicator

Product Series

Part Ordering Number System

Note: All temperatures refer to topside of the package, measured on the package body surface.

POLY-FUSE® Resettable PTCs

Speciﬁcations are subject to change without notice.

Revised: BA.11/19/20

Surface Mount > Automotive miniASMDC Series

Tape and Reel Speciﬁcations

Description

miniASMDC EIA 481-1 (mm)

miniASMDC010F

miniASMDC014F

miniASMDC020F

miniASMDC030F

miniASMDC050F

miniASMDC075F

miniASMDC110F/16

miniASMDC125F/16

miniASMDC150F/12

miniASMDC150F/16

miniASMDC200F/16

miniASMDC075F/24

miniASMDC075F/33

miniASMDC110F/24

miniASMDC260F/12

miniASMDC260F/13.2

miniASMDC260F/16

miniASMDC150F/24

W12.0 ± 0.30 12.0 ± 0.30 12.0 ± 0.30

P04.0 ± 0.10 4.0 ± 0.10 4.0 ± 0.10

P18.0 ± 0.10 8.0 ± 0.10 8.0 ± 0.10

P22.0 ± 0.05 2.0 ± 0.05 2.0 ± 0.05

A03.5 ± 0.1 3.7 ± 0.1 3.7 ± 0.1

B04.95 ± 0.1 4.9 ± 0.1 4.9 ± 0.1

B1 max 6.15 6.15 6.15

D01.5 + 0.10/ -.00 1.5 + 0.10/ -.00 1.5 + 0.10/ -.00

F5.50 ± 0.05 5.50 ± 0.05 5.50 ± 0.05

E11.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10

E2 min 10.25 10.25 10.25

T max 0.35 0.35 0.35

T1 max 0.1 0.1 0.1

K00.9 ± 0.1 1.4 ± 0.1 1.78 ± 0.1

A max 185 185 185

N min 50 50 50

W112.4 + 2.0/-.00 12.4 + 2.0/-.00 12.4 + 2.0/-.00

W2 max 18.4 18.4 18.4

POLY-FUSE® Resettable PTCs

Speciﬁcations are subject to change without notice.

Revised: BA.11/19/20

Surface Mount > Automotive miniASMDC Series

Tape and Reel Diagrams

Cover Tape

Embossment

Center Lines

of Cavity

Cover Tape

Embossed Cavity

Carrier Tape

N (Hub Dia.)

W2 (Measured at Hub)

W1 (Measured at Hub)

Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are

not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.

WARNING

• Users should independently evaluate the suitability of and test each product selected for their own application.

• Operation beyond the maximum ratings or improper use may result in device damage and possible electrical arcing and ﬂame.

• These devices are intended for protection against damage caused by occasional overcurrent or overtemperature fault conditions and should not be used when repeated fault conditions

or prolonged trip events are anticipated.

• Contamination of the PPTC material with certain silicone-based oils or some aggressive solvents can adversely impact the performance of the devices.

• Device performance can be impacted negatively if devices are handled in a manner inconsistent with recommended electronic, thermal, and mechanical procedures for electronic

components.

• PPTC devices are not recommended for installation in applications where the device is constrained such that its PTC properties are inhibited, for example in rigid potting materials or in

rigid housings, which lack adequate clearance to accommodate device expansion.

• Operation in circuits with a large inductance can generate a circuit voltage (Ldi/dt) above the rated voltage of the device.