MSP-450-24 - MEAN WELL ENTERPRISES

Universal AC input / Full range

Built-in active PFC function, PF>0.95

High efficiency up to 89.5%

Withstand 300VAC surge input for 5 seconds

Protections: Short circuit / Overload / Over voltage / Over temperature

Built-in constant current limiting circuit

Medical safety approved (MOOP level)

Built-in cooling Fan ON-OFF control

Built-in DC OK signal

Built-in remote ON-OFF control

Stand by 5V@0.3A

Built-in remote sense function

No load power consumption<0.6W (Note.6)

5 years warranty

SPECIFICATION

MSP-450-3.3 MSP-450-5 MSP-450-7.5 MSP-450-12 MSP-450-15 MSP-450-24 MSP-450-36 MSP-450-48

MODEL

DC VOLTAGE

RATED CURRENT

CURRENT RANGE

RATED POWER

RIPPLE & NOISE (max.) Note.2

OUTPUT VOLTAGE ADJ. RANGE

VOLTAGE TOLERANCE

Note.3

LINE REGULATION

LOAD REGULATION

SETUP, RISE TIME

HOLD UP TIME (Typ.)

VOLTAGE RANGE Note.4

FREQUENCY RANGE

POWER FACTOR (Typ.)

EFFICIENCY (Typ.)

INPUT

ENVIRONMENT

INRUSH CURRENT (Typ.)

LEAKAGE CURRENT

OVER TEMPERATURE

SAFETY STANDARDS

SAFETY &

FUNCTION

EMC

(Note 8)

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

WORKING TEMP.

DC OK SIGNAL

REMOTE CONTROL

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

MTBF

DIMENSIONOTHERS

NOTE

PACKING

OVERLOAD

OVER VOLTAGE

PROTECTION

AC CURRENT (Typ.)

3.3V 5V 7.5V 12V 15V 24V 36V 48V

90A 90A 60A 37.5A 30A 18.8A 12.5A 9.5A

0 ~ 90A 0 ~ 90A 0 ~ 60A 0 ~ 37.5A 0 ~ 30A 0 ~ 18.8A 0 ~ 12.5A 0 ~ 9.5A

297W 450W 450W 450W 450W 451.2W 450W 456W

80mVp-p 80mVp-p 100mVp-p 120mVp-p 150mVp-p 150mVp-p 240mVp-p 240mVp-p

2.8 ~ 3.8V 4.3 ~ 5.8V 6.8 ~ 9V 10.2 ~ 13.8V 13.5 ~ 18V 21.6 ~ 28.8V 28.8 ~ 39.6V 40.8 ~ 55.2V

±2.0% ±2.0% ±2.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0%

±0.5% ±0.5% ±0.5% ±0.3% ±0.3% ±0.2% ±0.2% ±0.2%

±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%

1000ms, 100ms/230VAC 2500ms, 100ms/115VAC at full load

16ms/230VAC 16ms/115VAC at full load

85 ~ 264VAC 120 ~ 370VDC

47 ~ 63Hz

PF>0.95/230VAC PF>0.99/115VAC at full load

80% 83%

6 ~ 7V 9.4 ~ 10.9V 14.4 ~ 16.8V 18.8 ~ 21.8V 30 ~ 34.8V 41.4 ~ 48.6V 57.6 ~ 67.2V

86.5% 88% 89% 88% 89% 89.5%

5A/115VAC 2.4A/230VAC

35A/115VAC 70A/230VAC

105 ~ 135% rated output power

3.96 ~ 4.62V

Protection type : Constant current limiting, recovers automatically after fault condition is removed

Protection type : Shut down o/p voltage, re-power on to recover

Shut down o/p voltage, recovers automatically after temperature goes down

ANSI/AAMI ES60601-1, IEC60601-1, approved

EAC TP TC 004

Compliance to EN55011 (CISPR11) Class B, EN61000-3-2,-3,EAC TP TC 020

Compliance to EN61000-4-2,3,4,5,6,8,11, EN60601-1-2,EAC TP TC 020

I/P-O/P:4KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃

-40 ~ +70 (Refer to "Derating Curve")℃

RC+ / RC-: 4 ~ 10V or open = power on ; 0 ~ 0.8V or short = power off

PSU turn on : 3.3 ~ 5.6V ; PSU turn off : 0 ~ 1V

20 ~ 90% RH non-condensing

-40 ~ +85 , 10 ~ 95% RH non-condensing℃

±℃ ℃0.03%/ (0 ~ 50 )

10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes

159.3K hrs min. MIL-HDBK-217F (25 )℃

218*105*41mm (L*W*H)

File Name:MSP-450-SPEC 2018-01-15

■ Features :

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. Derating may be needed under low input voltages. Please check the derating curve for more details.

5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.

6. No load power consumption<0.5W when RC- & RC+ (CN100 pin1,2) 0 ~ 0.8V or short.

7. When the input voltage is less than 40VAC, the SPS may exhibit degradation of performance. The final product manufacturers must re-confirm this

deviation that does not affect basic safety or essential performance.

8. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on

a mm* mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives.360 360 For guidance on how to

perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)

9. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃

MSP-450 series

450W Single Output Medical Type

1.19Kg; 12pcs/15.3Kg/0.82CUFT

5V STANDBY

5VSB : 5V@0.3A ; tolerance 5%, ripple : 50mVp-p(max.)±

FAN CONTROL (Typ.)

Load 20 10% or RTH2 50 Fan on±≧℃

EMC IMMUNITY

EMC EMISSION

Earth leakage current < 300 A/264VAC , Touch leakage current < 100 A/264VAC

μμ

ISOLATION LEVEL

Primary-Secondary: 2×MOOP, Primary-Earth: 1×MOOP, Secondary-Earth: 1×MOOP

Mechanical SpecificationMechanical Specification Case No. 995A Unit:mm

AC Input Terminal Pin No.

Assignment

DC Output Terminal Pin No.

Assignment

Pin No. Pin No.

1 1~3

2 4~6

Assignment Assignment

AC/N +V

AC/L -V

Derating Curve Output Derating VS Input Voltage

INPUT VOLTAGE (V) 60Hz

85 100 125 135 155 264

100

LOAD(%)

AMBIENT TEMPERATURE ( )℃

LOAD (%)

-40010203040506070

100

125

(HORIZONTAL)

PWM fosc : 70KHz

Block Diagram

Pin No. Pin No.

Assignment

-S

DC-OK

GND

Assignment

AUXG

AUX

RC-

RC+

Mating Housing Terminal

or equivalent or equivalent

Connector Pin No. Assignment(CN100) : HRS DF11-8DP-2DS or equivalent

HRS DF11-8DS

HRS DF11-**SC

O.L.P.

O.T.P.

EMI INRUSH

ACTIVE

FILTER CURRENT

LIMITING

RECTIFIERS

PFC

I/P

PWM

PFC

CIRCUIT

DETECTION

POWER

AUX

SWITCHING

POWER

FILTER

RECTIFIERS

CONTROL

O.V.P.

O.T.P.

REMOTE

CONTROL

119.2

AUX

-V

-S

AUXG

RC+

DC OK

RC-

450W Single Output Medical Type

File Name:MSP-450-SPEC 01-152018-

MSP-450 series

32.8152.4

Air flow

direction FAN

12max.

I/P

20.75

8.2

CN100

LED

(Vo ADJ.)SVR1

152.4

218

O/P

105

4-M4 L=5

63.5

8-M4 L=4 (Both Sides)

32.8

18max.

12.5

The remote sensing compensates voltage drop on

the load wiring up to 0.5V.

CN100

AUX

GND

-S

AUXG

DC-OK

1.Remote Sense

Sense lines should

be twisted in pairs

LOAD

+S -S

(Pin7) (Pin8)

Fig 1.1

Between DC-OK(pin5) and GND(pin6)

3.3 ~ 5.6V

0 ~ 1V

Output Status

OFF

DC-OK signal is a TTL level signal. High when PSU turns on.

CN100

2.DC-OK Signal

Fig 2.1

Fig 3.1

5DC-OK DC-OK Signal is a TTL level signal, referenced to pin6(DC-OK GND). High when PSU turns on.

7+S

Positive sensing. The +S signal should be connected to the positive terminal of the load. The +S and -S leads should be twisted in pair to

minimize noise pick-up effect. The maximum line drop compensation is 0.5V.

8-S

Negative sensing. The -S signal should be connected to the negative terminal of the load. The -S and +S leads should be twisted in pair to

minimize noise pick-up effect. The maximum line drop compensation is 0.5V.

6GND This pin connects to the negative terminal(-V). Return for DC-OK signal output.

RC-

RC+

CN100

450W Single Output Medical Type

File Name:MSP-450-SPEC 01-152018-

MSP-450 series

Function Description of CN100

Pin No. Function Description

Function Manual

RC+

RC- Remote control ground.

Turns the output on and off by electrical or dry contact between pin 2 (RC-), Short: Power OFF, Open: Power ON.

AUX

AUXG Auxiliary voltage output ground. The signal return is isolated from the output terminals (+V & -V).

Between RC+(pin1) and RC-(pin2)

SW ON (Short)

SW OFF (Open)

Output Status

OFF

The PSU can be turned ON/OFF by using the

"Remote Control" function.

CN100

3.Remote Control

Auxiliary voltage output, 4.75~5.25V, referenced to pin 4(AUXG). The maximum load current is 0.3A. This output is not controlled by the

"remote ON/OFF control".