Crystal oscillator Epson Toyocom Product Number (please contact us) EG-2121CA: Q3805CAx0xxxx00 : X1M000101xxxx00 EG-2102CA: Q3806CA00xxxx00 : X1M000091xxxx00 CRYSTAL OSCILLATOR LOW-JITTER SAW OSCILLATOR EG - 2121 / 2102CA series *Frequency range *Supply voltage : 53.125 MHz to 700 MHz : 2.5 V (EG-2121CA) : 3.3 V (EG-2102CA) *Output : Differential LV-PECL or LVDS or HCSL *Function : Output enable(OE) *External dimensions : 7.0 x 5.0 x 1.2 t (mm) Typ. Actual size EG-2121CA *Very low jitter and low phase noise by SAW unit. EG-2102CA Specifications (characteristics) Differential LV-PECL Output L_PECL VIH VIL EG-2121CA EG-2102CA Differential LV-PECL 53.125 MHz to 500 MHz 100 MHz to 700 MHz 2.5 V 0.125 V 3.3 V 0.3 V -40 C to +100 C P:0 C to +70 C ,R:-5 C to +85 C ,S:-20 C to +70 C G: 50 x 10-6 ,H: 100 x 10-6 80 mA Max. 100 mA Max. 20 mA Max. 32 mA Max P:40 % to 60 % (f0 > 350 MHz) P:45 % to 55 % P:45 % to 55 % (f0 350 MHz) D:48 % to 52 % D:48 % to 52 % (f0 175 MHz) (f0 350 MHz) 1.55 V Typ. 2.35 V Typ. VCC-1.025 V to VCC-0.88 V 0.8 V Typ. 1.6 V Typ. VCC-1.81 V to VCC-1.62 V 50 70 % VCC Min. 30 % VCC Max. Rise time / Fall time tr / tf 400 ps Max. Start-up time t_str Phase Jitter tPJ 10 ms Max. 0.05 x 10-3 UI Typ. 1 ps Max. 10 x 10-6 / year Max. Item Symbol Output frequency range Supply voltage Temperature Storage temperature range Operating temperature Frequency tolerance *1 Current consumption Disable current VCC T_stg T_use f_tol ICC I_dis Symmetry f0 SYM VOH Output voltage VOL Output load condition Output enable input voltage Output disable input voltage Frequency aging *2 f_aging Remarks Please contact us for inquiries regarding available frequencies. Store as bare product after unpacking Please contact us for inquiries about S spec. P:0 C to +70 C,R:-5 C to +85 C,S:-20 C to +70 C OE=VCC,RL=50 or 100 OE=GND at outputs crossing point DC characteristics Terminated to VCC -2.0 V OE terminal OE terminal Between 20% VCC and80%of (VOH-VOL) Between 20 %and 80 %of Differential Output peek to peek voltage Time at minimum supply voltage to be 0 s Offset frequency: 12 kHz to 20 MHz +25 C,First year,VCC=2.5 V,3.3 V *1 As per below table 1. *2 Except: ***A LVDS Output VOD VOD VOS VOS L_LVDS VIH VIL EG-2102CA LVDS 53.125 MHz to 700 MHz 2.5 V 0.125 V 3.3 V 0.3 V -40 C to +100 C P:0 C to +70 C ,R:-5 C to +85 C ,S:-20 C to +70 C G: 50 x 10-6 ,H: 100 x 10-6 30 mA Max 45 mA Max. 20 mA Max 30 mA Max. L:40 % to 60 % L:40 % to 60 % (f0 > 350 MHz) (f0 > 350 MHz) L:45 % to 55 % L:45 % to 55 % (f0 350 MHz) (f0 350 MHz) V:48 % to 52 % V:48 % to 52 % (f0 175 MHz) (f0 175 MHz) 350 mV Typ. 247 mV to 454 mV 50 mV 1.25 V Typ. 1.125 V to 1.375 V 150 mV 100 70 % VCC Min. 30 % VCC Max. Rise time / Fall time tr / tf 400 ps Max. Start-up time t_str 10 ms Max. 0.05 x 10-3 UI Typ. 1 ps Max. 10 x 10-6 / year Max. Item Symbol Output frequency range Supply voltage Temperature Storage temperature range Operating temperature Frequency tolerance *1 Current consumption Disable current f0 Symmetry SYM Output voltage Output load condition Output enable input voltage Output disable input voltage tPJ Phase Jitter Frequency aging VCC T_stg T_use f_tol ICC I_dis *2 f_aging EG-2121CA *1 As per below table 1. *2 Except: ***A http://www.epsontoyocom.co.jp Remarks Please contact us for inquiries regarding available frequencies. Store as bare product after unpacking Please contact us for inquiries about S spec. P:0 C to +70 C,R:-5 C to +85 C,S:-20 C to +70 C OE=VCC,RL=50 or 100 OE=GND at outputs crossing point Differential output, DC characteristics Output change, DC characteristics Offset, DC characteristics Offset change, DC characteristics Connected between OUT to OUT OE terminal OE terminal Between 20% VCC and80%of (VOH-VOL) Between 20 %and 80 %of Differential Output peek to peek voltage Time at minimum supply voltage to be 0 s Offset frequency: 12 kHz to 20 MHz +25 C,First year,VCC=2.5 V,3.3 V Crystal oscillator Epson Toyocom HCSL Output Item EG-2121CA EG-2102CA HCSL 100 MHz to 350 MHz 2.5 V 0.125 V 3.3 V 0.3 V -40 C to +125 C Symbol f0 Output frequency range Supply voltage Storage temperature Temperature Operating range temperature Frequency tolerance *1 Current consumption Disable current Symmetry High output voltage Low output Voltage Output load condition Output enable input voltage Output disable input voltage Rise time / Fall time Start-up time VCC T_stg Please contact us for inquiries regarding available frequencies. Store as bare product after unpacking T_use P:0 C to +70 C ,R:-5 C to +85 C ,S:-20 C to +70 C f_tol ICC I_dis SYM VOH VOL L_HCSL VIH VIL tr / tf t_str G: 50 x 10-6 ,H: 100 x 10-6 80 mA Max. 85 mA Max. 20 mA Max. 35 mA Max 45 % to 55 % 0.75 V Typ. -0.3 V Typ. 50 70 % VCC Min. 30 % VCC Max. 500 ps Max. 10 ms Max. 0.05 x 10-3 UI Typ. 1 ps Max. 10 x 10-6 / year Max. tPJ Phase Jitter Frequency aging Remarks *2 f_aging OE=VCC,L_HCSL=50 OE=GND at outputs crossing point DC characteristics Terminated to GND OE terminal OE terminal Between 0.175 V and 0.525 V of output Time at minimum supply voltage to be 0 s Offset frequency: 12 kHz to 20 MHz +25 C,First year,VCC=2.5 V,3.3 V *1 As per below table 1. *2 Except: ***A Table 1 Frequency tolerance and aging P:Differential LV-PECL EG-2121CA Frequency range EG-2102CA Details of frequency tolerance HP: 100 x 10-6 (0C to +70C) HR: 100 x 10-6 (-5C to +85C) GP: 50 x 10-6 Frequency (0C to +70C) tolerance GR: 50 x 10-6 (-5C to +85C) HS: 100 x 10-6 (-20C to +70C) GS: 50 x 10-6 (-20C to +70C) D: Differential LV-PECL f0 175 MHz f0 350 MHz A *3 N *4 A *3 N *4 PHPA PHPN DHPA PHRA*5 PHRN*5 PGPA*5 *5 - V:LVDS H:HCSL f0 175 MHz All range A *3 N *4 A *3 N *4 A *3 N *4 DHPN LHPA LHPN VHPA VHPN HHPA HHPN DHRA*5 DHRN*5 LHRA*5 LHRN*5 VHRA*5 VHRN*5 HHRA HHRN PGPN*5 DGPA*5 DGPN*5 LGPA*5 LGPN*5 VGPA*5 VGPN*5 HGPA HGPN PGRN*5 - DGRN*5 - LGRN*5 - VGRN*5 PHSN PHSA L:LVDS All range *5 PGSN *5 *5 DHSA DHSN - *5 DGSN *5 *5 LHSA - LHSN *5 LGSN *5 VHSA *5 - VHSN - HGRN *5 HHSA HHSN *5 - HGSN VGSN This includes initial frequency tolerance, temperature variation, supply voltage variation, reflow drift, and aging(+25 C,10 years). This includes initial frequency tolerance, temperature variation, supply voltage variation, and reflow drift(except aging). 53.125 MHz f0 < 100 MHz : Unavailable. Jitter Symbol Specifications 0.2 ps Typ. tDJ tRJ tRMS Jitter * 3 ps Typ. * Based on DTS-2075 Digital timing system made from WAVECREST with jitter analysis software VISI6. * Based on SIA-3100C signal integrity analyzer made from WAVECREST. External dimensions (Unit:mm) #2 #4 #4 1.4 #5 #6 Footprint (Recommended) #3 #3 7.00.2 2.54 #1 #2 (Unit:mm) 1.6 2.6 E EG-2121 250.000H GPA 282A 5.08 1.20.2 #1 : Differential LV-PECL, LVDS output : HCSL output 5.00.2 #5 Random Jitter (RMS of total distribution) Peak to Peak Accumulated Jitter() n=2 to 50000 cycles 3 ps Typ. 25 ps Typ. 4 ps Typ. tp-p tacc #6 Remarks Deterministic Jitter 1.5 Item 3.9 Table 2 1.1 *3 *4 *5 All range 5.08 Pin map Pin 1 2 3 4 5 6 Connection OE N.C. GND OUT OUT VCC Note. OE pin = HIGH : Specified frequency output. OE pin = LOW : Output is high impedance #3 is connected to the cover. http://www.epsontoyocom.co.jp 2.54 5.08 To maintain stable operation, provide by-pass capacitor with more than 0.1 F at a location as near as possible to the power source terminal of the crystal products (between VCC - GND). "QMEMS" EPSON TOYOCOM In order to meet customer needs in a rapidly advancing digital, broadband and ubiquitous society, we are committed to offering products that are one step ahead of the market and a rank above the rest in quality. To achieve our goals, we follow a "3D (three device) strategy" designed to drive both horizontal and vertical growth. We will to grow our three device categories of "Timing Devices", "Sensing Devices" and "Optical Devices", and expand vertical growth through a combination of products from these categories. A Quartz MEMS is any high added value quartz device that exploits the characteristics of quartz crystal material but that is produced using MEMS (micro-electro-mechanical system) processing technology. Market needs are advancing faster than previously imagined toward smaller, more stable crystal products, but we will stay ahead of the curve by rolling out products that exceed market speed and quality requirements. We want to further accelerate the 3D strategy by QMEMS. Quartz devices have become crucial in the network environment where products are increasingly intended for broadband, ubiquitous applications and where various types of terminals can transfer information almost immediately via LAN and WAN on a global scale. Epson Toyocom Corporation addresses every single aspect within a network environment. The new corporation offers "Digital Convergence" solutions to problems arising with products for consumer use, such as, core network systems and automotive systems. PROMOTION OF ENVIRONMENTAL MANAGEMENT SYSTEM CONFORMING TO INTERNATIONAL STANDARDS At Epson Toyocom, all environmental initiatives operate under ISO 14000 is an international standard for environmental management the Plan-Do-Check-Action(PDCA) cycle designed to achieve that was established by the International Standards Organization in 1996 continuous improvements. The environmental management against the background of growing concern regarding global warming, system (EMS) operates under the ISO 14001 environmental destruction of the ozone layer, and global deforestation. management standard. All of our major manufacturing and non-manufacturing sites,in Japan and overseas, completed the acquisition of ISO 14001 certification. WORKING FOR HIGH QUALITY In order provide high quality and reliable products and services than meet customer needs, Epson Toyocom made early efforts towards obtaining ISO9000 series certification and has acquired ISO9001 for all business establishments in Japan and abroad. We have also acquired ISO/TS 16949 certification that is requested strongly by major automotive manufacturers as standard. ISO/TS 16949 is a global standard based on QS-9001, a severe standard corresponding to the requirements from the automobile industry. Explanation of the mark that are using it for the catalog Pb free. Complies with EU RoHS directive. *About the products without the Pb-free mark. Contains Pb in products exempted by EU RoHS directive. (Contains Pb in sealing glass, high melting temperature type solder or other.) The products have been designed for high reliability applications such as Automotive. Notice This material is subject to change without notice. Any part of this material may not be reproduced or duplicated in any form or any means without the written permission of Epson Toyocom. The information, applied circuitry, programming, usage, etc., written in this material is intended for reference only. Epson Toyocom does not assume any liability for the occurrence of infringing on any patent or copyright of a third party. This material does not authorize the licensing for any patent or intellectual copyrights. Any product described in this material may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of International Trade and Industry or other approval from another government agency. You are requested not to use the products (and any technical information furnished, if any) for the development and/or manufacture of weapon of mass destruction or for other military purposes. You are also requested that you would not make the products available to any third party who may use the products for such prohibited purposes. These products are intended for general use in electronic equipment. When using them in specific applications that require extremely high reliability, such as the applications stated below, you must obtain permission from Epson Toyocom in advance. / Space equipment (artificial satellites, rockets, etc.) / Transportation vehicles and related (automobiles, aircraft, trains, vessels, etc.) / Medical instruments to sustain life / Submarine transmitters / Power stations and related / Fire work equipment and security equipment / traffic control equipment / and others requiring equivalent reliability. In this new crystal master for Epson Toyocom, product codes and markings will remain as previously identified prior to the merger. Due to the on-going strategy of gradual unification of part numbers, please review product codes and markings, as they will change during the course of the coming months. We apologize for the inconvenience, but we will eventually have a unified part numbering system for Epson Toyocom that will be user friendly.