PLA140 Single-Pole Normally Open OptoMOS(R) Relay Parameter Blocking Voltage Load Current Max On-resistance Rating 400 250 8 Units VP mA Description The PLA140 is a single-pole normally open (1-Form-A) Solid State Relay that uses optically coupled MOSFET technology to provide 3750Vrms of input-to-output isolation. The relay outputs are constructed with efficient MOSFET switches and photovoltaic die that use Clare's patented OptoMOS architecture while the input, a highly efficient GaAlAs infrared LED, provides the optically coupled control. Features * Low On-Resistance, High Current Handling * Low Drive Power Requirements (TTL/CMOS Compatible) * 3750Vrms Input/Output Isolation * High Reliability * VDE Compatible * FCC Compatible * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Small 6-Pin Package * Surface Mount Tape & Reel Version Available The PLA140's combination of low on-resistance and high load current handling makes it suitable for a variety of industrial applications. Because Solid State Relays like the PLA140 have no moving parts, they can offer faster, bounce-free switching in a more compact surface mount or though hole package than traditional electromechanical relays. Applications * Telecommunications * Telecomm Switching * Hook Switch * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls * Automotive Approvals * UL Certified Component: File E76270 * CSA Certified Component: Certificate 1172007 * Certified to EN60950 TUV Certificate B 09 07 49410 004 Ordering Information Part Number PLA140 PLA140S PLA140STR Description 6-Pin DIP (50/Tube) 6-Pin Surface Mount (50/Tube) 6-Pin Surface Mount (1,000/Reel) Switching Characteristics of Normally Open Devices Pin Configuration AC/DC Configuration + Control - Control Do Not Use 1 6 2 5 3 4 Form-A Load Do Not Use Load IF DC Only Configuration + Control - Control Do Not Use Pb RoHS 2002/95/EC DS-PLA140-R06 1 6 2 5 3 4 90% + Load - Load 10% ILOAD ton toff e3 www.clare.com 1 PLA140 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate Linearly 1.33 mW/C 2 Derate Linearly 6.67 mW/C Ratings 400 5 50 1 150 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical absolute maximum ratings are at 25C Electrical Characteristics @ 25C Parameter Output Characteristics Load Current (Continuous) AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics Input to Output Capacitance 2 Conditions Symbol Min Typ Max IF=5mA IL IF=5mA , t=10ms ILPK - - 250 350 500 ILEAK - 5.5 1.5 - 8 3 1 IF=0mA , VL=50V, f=1MHz ton toff COUT - 0.4 0.19 18 3 1 - IL=250mA IF=5mA VR=5V IF IF VF IR 0.2 0.9 - 0.46 0.44 1.2 - 5 1.4 10 mA mA V A - CI/O - 3 - pF IF=5mA , IL=250mA IF=5mA , IL=350mA VL=400VP IF=5mA, VL=10V RON www.clare.com Units mA mA A ms pF R06 PLA140 PERFORMANCE DATA* 30 Typical LED Forward Voltage Drop (N=50, IF=5mA, TA=25C) Typical IF for Switch Operation (IL=250mA, TA=25C) 20 Typical On-Resistance Distribution (N=50, IF=5mA, IL=250mA, TA=25C) 20 20 15 10 Device Count (N) Device Count (N) Device Count (N) 25 15 10 5 15 10 5 5 0 Typical Turn-On Time (N=50, IF=5mA, IL=100mA, TA=25C) Typical Turn-Off Time (N=50, IF=5mA, IL=100mA, TA=25C) 25 15 10 20 15 10 4.8 4.9 5.0 5.1 5.2 On-Resistance () 5.3 5.4 Typical Blocking Voltage Distribution (N=50, IF=0mA, TA=25C) 15 10 5 0 0 0.675 0.750 0.825 0.900 0.975 1.050 1.125 1.200 Turn-On Time (ms) 0.13 0.15 0.17 0.19 0.21 0.23 0.25 0.27 Turn-Off Time (ms) Typical LED Forward Voltage Drop vs. Temperature Typical Turn-On Time vs. LED Forward Current (IL=100mA) 1.6 1.6 442 448 454 460 466 472 478 Blocking Voltage (VP) 484 Typical Turn-Off Time vs. LED Forward Current (IL=100mA) 0.26 1.5 1.4 1.3 1.1 -40 0.60 -20 1.0 0.8 0.6 0.4 0.0 0 20 40 60 Temperature (C) 80 0.22 0.20 0.18 0.16 0 100 Typical IF for Switch Operation vs. Temperature (IL=100mA) 1.4 10 20 30 LED Current (mA) 40 50 0 Typical Turn-On Time vs. Temperature (IF=5mA, IL=100mA) 0.26 1.3 Turn-On Time (ms) 0.56 0.54 0.52 0.50 0.48 0.46 1.2 1.1 1.0 0.9 0.8 0.7 0 20 40 60 Temperature (C) 80 100 0.5 -40 10 20 30 LED Current (mA) 40 50 Typical Turn-Off Time vs. Temperature (IF=5mA, IL=100mA) 0.24 0.22 0.20 0.18 0.16 0.6 -20 0.24 0.2 0.58 0.44 -40 1.2 Turn-Off Time (ms) 1.2 IF=50mA IF=20mA IF=10mA IF=5mA Turn-Off Time (ms) 1.4 Turn-On Time (ms) LED Forward Voltage (V) 20 5 5 4.7 Device Count (N) 20 0 LED Current (mA) 0 0.28 0.34 0.40 0.46 0.52 0.58 0.64 0.70 LED Current (mA) Device Count (N) Device Count (N) 25 0 1.235 1.240 1.245 1.250 1.255 1.260 1.265 LED Forward Voltage (V) -20 0 20 40 60 Temperature (C) 80 100 0.14 -40 -20 0 20 40 60 Temperature (C) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R06 www.clare.com 3 PLA140 PERFORMANCE DATA* 0.3 8 0.2 7 6 5 275 0.1 0.0 -0.1 -0.2 3 -40 -0.3 -1.5 -20 0 20 40 60 Temperature (C) 80 100 200 175 150 125 100 -1.0 -0.5 0.0 0.5 Load Voltage (V) 1.0 1.5 -40 Typical Load Current vs. Load Voltage DC-Only Configuration (IF=5mA, TA=25C) 0.35 350 0.30 325 1.4 0.20 0.15 0.10 1.2 0.05 1.0 -40 0.00 -20 0 20 40 60 Temperature (C) 80 Load Current (mA) 1.6 0.25 500 70 Leakage Current (nA) 80 480 470 460 450 440 -40 -20 0 20 40 60 Temperature (C) 80 100 80 100 300 275 250 225 200 150 510 490 20 40 60 Temperature (C) 175 0.0 100 0 375 0.1 0.2 0.3 0.4 Load Voltage (V) 0.5 -40 0.6 Typical Leakage vs. Temperature Measured Across Pins 4&6 (VL=400V) -20 0 20 40 60 Temperature (C) 80 100 10s 100s Energy Rating Curve 1.2 Load Current (A) Load Current (A) 0.40 1.8 -20 Maximum Load Current vs. Temperature - DC-Only Configuration (IF=5mA) 2.2 Typical Blocking Voltage vs. Temperature Blocking Voltage (VP) 225 2.4 2.0 Maximum Load Current vs. Temperature - AC/DC Configuration (IF=5mA) 250 4 Typical On-Resistance vs. Temperature DC-Only Configuration (IF=5mA, IL=100mA) On-Resistance () Typical Load Current vs. Load Voltage AC/DC Configuration (IF=5mA, TA=25C) Load Current (mA) 9 Load Current (A) On-Resistance () Typical On-Resistance vs. Temperature AC/DC Configuration (IF=5mA, IL=100mA) 60 50 40 30 20 1.0 0.8 0.6 0.4 10 0 -40 -20 0 20 40 60 Temperature (C) 80 100 0.2 10s 100s 1ms 10ms 100ms Time 1s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R06 PLA140 Manufacturing Information All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020 in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. Moisture Sensitivity This product is rated Moisture Sensitivity Level 1 (MSL 1), and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature rating of 250C for a maximum of 30 seconds. All other guidelines of J-STD-020 must be observed. Board Wash Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb RoHS 2002/95/EC e3 MECHANICAL DIMENSIONS 8.382 0.381 (0.330 0.015) 7.239 TYP (0.285 TYP) 2.54 0.127 (0.100 0.005) PCB Hole Pattern 6 - 0.800 DIA. (6 - 0.031 DIA.) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) 1.651 0.254 (0.065 0.010) 3.302 0.051 (0.130 0.002) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 4.064 TYP (0.160 TYP) 5.080 0.127 (0.200 0.005) Dimensions mm (inches) 0.457 0.076 (0.018 0.003) R06 6.350 0.127 (0.250 0.005) www.clare.com 5 PLA140 PCB Land Pattern 0.635 0.127 (0.025 0.005) 8.382 0.381 (0.330 0.015) 2.54 0.127 (0.100 0.005) 9.524 0.508 (0.375 0.020) 2.54 (0.10) 6.350 0.127 (0.250 0.005) 7.620 0.254 (0.300 0.010) 0.457 0.076 (0.018 0.003) 1.651 0.254 (0.065 0.010) 8.90 (0.3503) 1.65 (0.0649) 0.254 0.0127 (0.010 0.0005) 0.65 (0.0255) 3.302 0.051 (0.130 0.002) 4.445 0.254 (0.175 0.010) Dimensions mm (inches) 1.651 0.254 (0.065 0.010) 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=16.00 (0.63) B0 = 10.10 (0.398) K0 = 4.90 (0.19) K1 = 3.80 (0.15) P = 12.00 (0.472) User Direction of Feed Embossed Carrier Embossment A0 = 10.10 (0.398) Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-PLA140-R06 (c)Copyright 2010, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 3/19/2010