RF (Radio Frequency) Type
SOP Series
1-Channel (Form A) Type
—Low On resistance—
PhotoMOS
RELAYS
mm inch
TYPICAL APPLICATIONS
• Telephones
• Measuring instruments
• Computer
• Industrial robots
• High-speed inspection machines
UL File No.: E43149
CSA File No.: LR26550
TYPES
RATING
6.3±0.2
.248±.008 4.4±0.2
.173±.008
2.1±0.2
.083±.008
Item
Input
Output
Total power dissipation
I/O isolation voltage
LED forward current
LED reverse voltage
Peak forward current
Peak load current
Power dissipation
Power dissipation
Load voltage (peak AC)
Continuous load current
Sym-
bol Type of
connec-
tion
IF
VR
IFP
Pin
VL
ILA
B
C
Ipeak
Pout
PT
Viso
50 mA
3 V
75 mW
450 mW
500 mW
1,500 V AC
Remarks
1 A f = 100 Hz, Duty factor = 0.1 %
Non-condensing at low temperatures
1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)
Temperature limits Operating
Storage Topr
Tstg
–20°C to +85°C –4°F to +185°F
–40°C to +100°C –40°F to +212°F
AQV225NS AQV227NS
80 V 200 V
0.12 A
0.15 A
0.25 A
0.05 A
0.06 A
0.08 A
0.36 A 0.15 A
AQV224NS
400 V
0.04 A
0.05 A
0.06 A
0.12 A A connection: 100 ms (1 shot) VL =DC
A connection: Peak AC, DC
B, C connection: DC
FEATURES
1. 1 channel (Form A) in super minia-
ture design
The device comes in a super-miniature
SO package measuring (W) 4.4×(L)
6.3×(H) 2.1 mm (W) .173×(L) .248×(H)
.083 inch—approx. 38% of the volume
and 66% of the footprint size of DIP type
PhotoMOS Relays.
Volume
(SOP)(DIP) Approx. 25%
Footprint Approx. 50%
2. Low capacitance between output
terminals ensure high response speed:
The capacitance between output termi-
nals is small, typically 10 pF. This enables
for a fast operation speed of 200 µs.
3. Low-level off state leakage current:
The SSR has an off state leakage cur-
rent of several milliamperes, whereas the
PhotoMOS relay has only 30 pA
even with the rated load voltage of 80 V
(AQV225NS).
4. Controls low-level analog signals
PhotoMOS relays feature extremely low
closed-circuit offset voltage to enable
control of low-level analog signals with-
out distortion.
5. Tape and reel
The device comes standard in a tape
and reel (1,000 pcs./reel) to facilitate
automatic insertion machines.
Output rating* Part No.
Load voltage Load current
80 V 120 mA
200 V 50 mA
400 V 40 mA
Picked from the 1/2/3-pin side
1 Form A
AQV225NSX
AQV227NSX
AQV224NSX
1 Form A
AQV225NSZ
AQV227NSZ
AQV224NSZ
Picked from the 4/5/6-pin side Packing quantity
in tape and reel
1,000 pcs.
* Indicate the peak AC and DC values.
Notes: (1) Tape package is the standard packing style. Also available in tube.(Part No. suffix “X” or “Z” is not needed when ordering; Tube: 75 pcs.;
Case: 1,500 pcs.)
(2) For space reasons, the top two letters of the product number “AQ” are omitted on the product seal. The package type indicator “X” and
“Z” are also omitted from the seal. (Ex. the label for product number AQV224NS is V224NS).
AC/DC
type
Item Sym-
bol Condition
Input
Output
Transfer
characteristics
LED operate
current
LED turn off
current
LED dropout
voltage
On resistance
Off state
leakage current
I/O
capacitance
Initial I/O isola-
tion resistance
Turn on time*
Turn off time*
Minimum
Typical
Maximum IFon
IFoff
VF
Ron
Ron
Ron
Cout
Ton
Ileak
Toff
Ciso
Riso
0.7 mA
3 mA
0.4 mA
0.65 mA
1.14 V (1.25 V at IF = 50 mA)
1.5 V
7.0 Ω
10.0 Ω
3.5 Ω
5.0 Ω
1.8 Ω
2.5 Ω
30 Ω
50 Ω
16 Ω
25 Ω
8 Ω
12.5 Ω
70 Ω
100 Ω
55 Ω
70 Ω
28 Ω
35 Ω
10 pF
15 pF
30 pA
10 nA 30 pA
10 nA
0.8 pF
1.5 pF
90 pA
10 nA
1,000 MΩ
IF = 5 mA
IF = 0
VB = 0
f = 1 MHZ
IF = 0
VL = Max.
IF = 5 mA
IL = Max.
IF = 5 mA
IL = Max.
IF = 5 mA
IL = Max.
Within 1 s on time
IL = 5 mA
IL = Max.
Within 1 s on time
IF = 5 mA
IL = Max.
Within 1 s on time
f = 1 MHZ
VB = 0
500 V DC
2. Electrical characteristics (Ambient temperature: 25°C 77°F)
Type
of con-
nection
—
—
—
A
B
C
—
—
—
—
—
For type of connection, see Page 26.
Output
capacitance
Minimum
Typical
Maximum
Minimum
Typical
Maximum
Minimum
Typical
Maximum
Minimum
Typical
Maximum
Minimum
Typical
Maximum
Minimum
Typical
Maximum
Minimum
Typical
Maximum
Minimum
Typical
Maximum
Minimum
Typical
Maximum
Minimum
Typical
Maximum
Minimum
Typical
Maximum
AQV225NS AQV227NS AQV224NS
0.25 ms
0.5 ms
0.08 ms
0.2 ms
IL = Max.
IL = Max.
Note: Recommendable LED forward current IF = 5 mA.
MFor Dimensions
MFor Schematic and Wiring Diagrams
MFor Cautions for Use
Ton
Input
Output 10%
90%
*Turn on/Turn off time
Toff
0
0.2
0.4
0.6
0.8
1.4
1.0
10 20 30 40 50 60
AQV225NS
1.2
0
AQV224NS,AQV227NS
LED forward current, mA
Turn on time, ms
2.-(1) On resistance vs. ambient temperature
characteristics
Measured portion: between terminals 4 and 6;
LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
2.-(2) On resistance vs. ambient temperature
characteristics
Measured portion: between terminals 4 and 6;
LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
1. Load current vs. ambient temperature
characteristics
Allowable ambient temperature: –20°C to +85°C
Type of connection: A –4°F to +185°F
3. Turn on time vs. ambient temperature
characteristics
LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
0
4.0
6.0
8.0
10.0
–20
12.0
02040608085
2.0
AQV225NS
On resistance, Ω
Ambient temperature, °C
0
50
100
150
0204060
8085 100–20
AQV225NS
AQV227NS
AQV224NS
Ambient temperature, °C
Load current, mA
4. Turn off time vs. ambient temperature
characteristics
LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
0
2
3
–20
5
020406080
1
4
AQV225NS
85
AQV227NS
AQV224NS
LED turn off current, mA
Ambient temperature, °C
0300 400
10–6
10–9
10–12
AQV224NS
100 200
AQV227NS
AQV225NS
Load voltege, V
Off state leakage current, A
5. LED operate current vs. ambient
temperature characteristics
Load voltage: Max. (DC);
Continuous load current: Max. (DC)
0
2
3
–20
5
020406080
1
4
AQV225NS
AQV227NS
85
AQV224NS
LED operate current, mA
Ambient temperature, °C
0
40
60
80
100
–20
120
02040608085
20
AQV224NS
AQV227NS
Ambient temperature, °C
On resistance, Ω
6. LED turn off current vs. ambient
temperature characteristics
Load voltage: Max. (DC);
Continuous load current: Max. (DC)
0
1.0
1.1
1.2
1.3
–20 020406080
1.4
50mA
30mA
20mA
10mA
5mA
1.5
85
Ambient temperature, °C
LED dropout voltage, V
7. LED dropout voltage vs. ambient
temperature characteristics
Sample: All types; LED current: 5 to 50 mA
431
–4 –3 –1
–150
–50
150
50
100
–100
–2 2
AQV225NS
AQV227NS
AQV224NS
Voltage, V
Current, mA
8. Voltage vs. current characteristics of output
at MOS portion
Measured portion: between terminals 5 and 6, 7 and 8;
Ambient temperature: 25°C 77°F
9. Off state leakage current
Measured portion: between terminals 4 and 6;
Ambient temperature: 25°C 77°F
10. LED forward current vs. turn on time
characteristics
Measured portion: between terminals 4 and 6;
Load voltage: Max. (DC); Continuous load current:
Max. (DC); Ambient temperature: 25°C 77°F
0
0.06
0.10
0.18
0.14
10 20 30 40
0.22
50 60
AQV225NSAQV224NS
0
AQV227NS
LED forward current, mA
Turn off time, ms
11. LED forward current vs. turn off time
characteristics
Measured portion: between terminals 4 and 6;
Load voltage: Max. (DC); Continuous load current:
Max. (DC); Ambient temperature: 25°C 77°F
REFERENCE DATA
12. Applied voltage vs. output capacitance
characteristics
Measured portion: between terminals 4 and 6;
Frequency: 1 MHz, 30 mVrms;
Ambient temperature: 25°C 77°F
0
2
4
12
20 40 60 80 100
6
8
0
AQV225NS
10
AQV227NS
AQV224NS
Applied voltage, V
Output capacitance, pF
13. Isolation characteristics
(50 Ωimpedance)
Measured portion: between terminals 4 and 6;
Ambient temperature: 25°C 77°F
14. Insertion loss characteristics
(50 Ωimpedance)
Measured portion: between terminals 4 and 6;
Ambient temperature: 25°C 77°F
010 10 10
67
10
40
60
80
20
100
45
AQV224NS
AQV225NS,AQV227NS
Frequency, Hz
Isolation, dB
010 10 10
67
10
2
3
4
1
5
45
AQV224NS
6
AQV227NS
AQV225NS
Frequency, Hz
Insertion loss, dB
Go To Online Catalog
6/1/1999 All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.