STPS5H100B/-1 (R) HIGH VOLTAGE POWER SCHOTTKY RECTIFIER MAIN PRODUCT CHARACTERISTICS K IF(AV) 5A VRRM 100 V Tj (max) 175 C VF (max) 0.61 V A NC DPAK STPS5H100B FEATURES AND BENEFITS NEGLIGIBLE SWITCHING LOSSES HIGH JUNCTION TEMPERATURE CAPABILITY LOW LEAKAGE CURRENT GOOD TRADE OFF BETWEEN LEAKAGE CURRENT AND FORWARD VOLTAGE DROP AVALANCHE RATED K DESCRIPTION A Schottky barrier rectifier designed for high frequency miniature Switched Mode Power Supplies such as adaptators and on board DC to DC converters. K NC IPAK STPS5H100B-1 ABSOLUTE RATINGS (limiting values) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 100 V IF(RMS) RMS forward current 10 A IF(AV) Average forward current Tc = 165C = 0.5 5 A IFSM Surge non repetitive forward current tp = 10 ms sinusoidal 75 A IRRM Repetitive peak reverse current tp = 2 s square F = 1kHz 1 A IRSM Non repetitive peak reverse current tp = 100 s square 2 A Tstg Storage temperature range - 65 to + 175 C 175 C 10000 V/s Tj dV/dt * : Maximum operating junction temperature * Critical rate of rise of reverse voltage dPtot 1 < thermal runaway condition for a diode on its own heatsink Rth(j-a) dTj July 1999 - Ed: 4B 1/5 STPS5H100B/-1 THERMAL RESISTANCES Symbol Rth (j-c) Parameter Junction to case Value Unit 2.5 C/W STATIC ELECTRICAL CHARACTERISTICS Symbol Parameter Tests Conditions IR * Reverse leakage current Tj = 25C Min. Pulse test : Forward voltage drop Max. Unit 3.5 A 4.5 mA 0.73 V VR = VRRM Tj = 125C VF ** Typ. 1.3 Tj = 25C IF = 5 A Tj = 125C IF = 5 A Tj = 25C IF = 10 A Tj = 125C IF = 10 A 0.57 0.61 0.85 0.66 0.71 * tp = 5 ms, < 2% ** tp = 380 s, < 2% To evaluate the maximum conduction losses use the following equation : P = 0.51 x IF(AV) + 0.02 x IF2(RMS) Fig. 1: Average forward power dissipation versus average forward current. Fig. 2: Average forward current versus ambient temperature (=0.5). IF(av)(A) PF(av)(W) 4.0 3.5 3.0 = 0.1 = 0.2 6 = 0.5 Rth(j-a)=Rth(j-c) 5 = 0.05 2.5 4 =1 Rth(j-a)=80C/W 3 2.0 1.5 2 T T 1.0 0.5 IF(av) (A) =tp/T tp 0.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 2/5 1 0 0 =tp/T tp 20 40 Tamb(C) 60 80 100 120 140 160 180 STPS5H100B/-1 Fig. 3: Non repetitive surge peak forward current versus overload duration (maximum values). IM(A) 120 110 100 90 80 70 60 50 40 30 IM 20 10 0 1E-3 Fig. 4: Relative variation of thermal impedance junction to case versus pulse duration. Zth(j-c)/Rth(j-c) 1.0 0.8 Tc=50C 0.6 Tc=75C 0.4 = 0.5 = 0.2 = 0.1 Tc=125C t T 0.2 Single pulse t(s) =0.5 tp(s) 1E-2 1E-1 1E+0 Fig. 5: Reverse leakage current versus reverse voltage applied. 0.0 1E-3 1E-2 =tp/T tp 1E-1 1E+0 Fig. 6: Junction capacitance versus reverse voltage applied (typical values). IR(A) C(pF) 5E+3 1000 1E+3 F=1MHz Tj=25C Tj=125C 1E+2 1E+1 100 1E+0 Tj=25C 1E-1 1E-2 VR(V) VR(V) 0 10 20 30 40 50 10 60 70 80 90 100 Fig. 7: Forward voltage drop versus forward current (maximum values). 100 Rth(j-a) (C/W) 100 90 80 70 60 50 40 30 20 10 0 Tj=125C 10.0 Tj=25C 1.0 VFM(V) 0.2 10 Fig. 8: Thermal resistance junction to ambient versus copper surface under tab (Epoxy printed circuit board FR4, copper thickness: 35m) (DPAK). IFM(A) 50.0 0.1 0.0 1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 S(Cu) (cm) 0 2 4 6 8 10 12 14 16 18 20 3/5 STPS5H100B/-1 PACKAGE MECHANICAL DATA DPAK DIMENSIONS REF. Millimeters Min. A A1 A2 B B2 C C2 D E G H L2 L4 V2 FOOT PRINT (in millimeters) 6.7 6.7 3 3 1.6 1.6 2.3 4/5 2.3 Max 2.20 2.40 0.90 1.10 0.03 0.23 0.64 0.90 5.20 5.40 0.45 0.60 0.48 0.60 6.00 6.20 6.40 6.60 4.40 4.60 9.35 10.10 0.80 typ. 0.60 1.00 0 8 Inches Min. Max. 0.086 0.094 0.035 0.043 0.001 0.009 0.025 0.035 0.204 0.212 0.017 0.023 0.018 0.023 0.236 0.244 0.251 0.259 0.173 0.181 0.368 0.397 0.031 typ. 0.023 0.039 0 8 STPS5H100B/-1 PACKAGE MECHANICAL DATA IPAK DIMENSIONS REF. A E C2 B2 L2 D H L L1 B3 B6 A1 B V1 B5 C G A3 A A1 A3 B B2 B3 B5 B6 C C2 D E G H L L1 L2 V1 Millimeters Inches Min. Typ. Max. Min. Typ. Max. 2.2 0.9 0.7 0.64 5.2 2.4 1.1 1.3 0.9 5.4 0.85 0.086 0.035 0.027 0.025 0.204 0.094 0.043 0.051 0.035 0.212 0.033 0.3 0.45 0.48 6 6.4 4.4 15.9 9 0.8 0.8 10 0.035 0.95 0.6 0.6 6.2 6.6 4.6 16.3 9.4 1.2 1 0.017 0.019 0.236 0.252 0.173 0.626 0.354 0.031 0.037 0.023 0.023 0.244 0.260 0.181 0.641 0.370 0.047 0.031 0.039 10 Ordering type Marking Package Weight Base qty Delivery mode STPS5H100B S5H100 DPAK 0.30g 75 Tube STPS5H100B-TR S5H100 DPAK 0.30g 2500 Tape & reel STPS5H100B-1 S5H100 IPAK 0.35g 75 Tube Epoxy meets UL94,V0 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics (c) 1999 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com 5/5