NGB8245N Ignition IGBT 20 A, 450 V, N-Channel D2PAK This Logic Level Insulated Gate Bipolar Transistor (IGBT) features monolithic circuitry integrating ESD and Overvoltage clamped protection for use in inductive coil drivers applications. Primary uses include Ignition, Direct Fuel Injection, or wherever high voltage and high current switching is required. http://onsemi.com 20 A, 450 V VCE(on) = 1.3 V @ IC = 10 A, VGE . 4.5 V Features * * * * * * * * * Ideal for Coil-on-Plug and Driver-on-Coil Applications D2PAK Package Offers Smaller Footprint for Increased Board Space Gate-Emitter ESD Protection Temperature Compensated Gate-Collector Voltage Clamp Limits Stress Applied to Load Integrated ESD Diode Protection Low Threshold Voltage for Interfacing Power Loads to Logic or Microprocessor Devices Low Saturation Voltage High Pulsed Current Capability This is a Pb-Free Device C RG G RGE E MARKING DIAGRAM Applications 4 Collector * Ignition Systems MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Symbol Value Unit Collector-Emitter Voltage VCES 490 V Collector-Gate Voltage VCER 490 V Gate-Emitter Voltage VGE "15 V Collector Current-Continuous @ TC = 25C - Pulsed IC 20 50 ADC AAC Continuous Gate Current IG 1.0 mA Transient Gate Current (t 2 ms, f 100 Hz) IG 20 mA 2.0 kV 8.0 kV Rating NGB 8245NG AYWW 1 D2PAK CASE 418B STYLE 4 1 Gate 3 Emitter 2 Collector NGB8245N = Device Code A = Assembly Location Y = Year WW = Work Week G = Pb-Free Package ESD (Charged-Device Model) ESD ESD (Human Body Model) R = 1500 W, C = 100 pF ESD ESD (Machine Model) R = 0 W, C = 200 pF ESD 500 V Device Package Shipping PD 150 1.0 W W/C NGB8245NT4G D2PAK (Pb-Free) 800 / Tape & Reel TJ, Tstg -55 to +175 C Total Power Dissipation @ TC = 25C Derate above 25C Operating & Storage Temperature Range Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. (c) Semiconductor Components Industries, LLC, 2012 June, 2012 - Rev. 1 1 ORDERING INFORMATION For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Publication Order Number: NGB8245N/D NGB8245N UNCLAMPED COLLECTOR-TO-EMITTER AVALANCHE CHARACTERISTICS (-55 TJ 175C) Symbol Characteristic Single Pulse Collector-to-Emitter Avalanche Energy VCC = 50 V, VGE = 5.0 V, Pk IL = 9.5 A, RG = 1 kW, L = 3.5 mH, Starting TC = 150C EAS Value 158 Unit mJ THERMAL CHARACTERISTICS Thermal Resistance, Junction-to-Case RqJC 1.0 C/W Thermal Resistance, Junction-to-Ambient (Note 1) RqJA 62.5 C/W TL 275 C Maximum Temperature for Soldering Purposes, 1/8 from case for 5 seconds (Note 2) 1. When surface mounted to an FR4 board using the minimum recommended pad size. 2. For further details, see Soldering and Mounting Techniques Reference Manual: SOLDERRM/D. ELECTRICAL CHARACTERISTICS Characteristic Symbol Test Conditions Temperature Min Typ Max Unit BVCES IC = 2.0 mA TJ = -40C to 175C 430 450 470 V IC = 10 mA TJ = -40C to 175C 450 475 490 IC = 12 A, L = 3.5 mH, RG = 1 kW TJ = -40C to 175C 420 450 480 VCE = 15 V, VGE = 0 V TJ = 25C 0.002 1.0 VCE = 250 V, RG = 1 kW TJ = -40C to 175C 0.5 2.0 100 TJ = 25C 30 33 39 IC = -75 mA TJ = 175C 31 35 40 TJ = -40C 30 31 37 TJ = 25C - 0.4 1.0 TJ = 175C - 20 35 TJ = -40C - 0.04 0.2 OFF CHARACTERISTICS Collector-Emitter Clamp Voltage Collector-Emitter Leakage Current Reverse Collector-Emitter Clamp Voltage Reverse Collector-Emitter Leakage Current Gate-Emitter Clamp Voltage ICES BVCES(R) ICES(R) VCE = -24 V mA V mA BVGES IG = "5.0 mA TJ = -40C to 175C 12 12.5 14 V IGES VGE = "5.0 V TJ = -40C to 175C 200 316 350 mA Gate-Emitter Leakage Current Gate Resistor RG TJ = -40C to 175C 70 Gate-Emitter Resistor RGE TJ = -40C to 175C 14.25 16 25 kW VGE(th) TJ = 25C 1.5 1.8 2.1 V TJ = 175C 0.7 1.0 1.3 TJ = -40C 1.7 2.0 2.3 4.0 4.6 5.2 mV/C V W ON CHARACTERISTICS (Note 3) Gate Threshold Voltage IC = 1.0 mA, VGE = VCE Threshold Temperature Coefficient (Negative) Collector-to-Emitter On-Voltage VCE(on) Forward Transconductance gfs IC = 10 A, VGE = 3.7 V TJ = -40C to 175C 0.8 1.11 1.97 IC = 10 A, VGE = 4.0 V TJ = -40C to 175C 0.8 1.10 1.85 IC = 15 A, VGE = 4.0 V TJ = -40C to 175C 0.8 1.24 2.00 IC = 6.0 A, VCE = 5.0 V TJ = 25C 10 19 25 Mhos 1100 1400 1600 pF 50 65 80 15 20 25 DYNAMIC CHARACTERISTICS (Note 4) Input Capacitance CISS Output Capacitance COSS Transfer Capacitance CRSS f = 10 kHz, VCE = 25 V http://onsemi.com 2 TJ = 25C NGB8245N ELECTRICAL CHARACTERISTICS Characteristic Symbol Test Conditions Temperature Min Typ Max Unit TJ = -40C to 175C 0.1 1.0 2.0 ms TJ = -40C to 175C 1.0 3.4 6.0 TJ = -40C to 175C 2.0 4.5 8.0 TJ = -40C to 175C 3.0 8.0 12 TJ = -40C to 175C 6.5 9.7 12.5 TJ = -40C to 175C 6.0 8.3 11 SWITCHING CHARACTERISTICS (Note 4) Turn-On Delay Time (Resistive) 10% VGE to 10% IC Rise Time (Resistive) 10% IC to 90% IC Turn-Off Delay Time (Resistive) 90% VGE to 90% IC Fall Time (Resistive) 90% IC to 10% IC Turn-Off Delay Time (Inductive) 90% VGE to 90% IC Fall Time (Inductive) 90% IC to 10% IC td(on)R trR VCC = 14 V, RL = 1.0 W, RG = 1.0 kW, VGE = 5.0 V td(off)R tfR td(off)L tfL VCC = 14 V, RL = 1.0 W, RG = 1.0 kW, VGE = 5.0 V VCE = BVCES, L = 0.5mH, RG = 1.0 kW, IC = 10 A, VGE = 5.0 V 3. Pulse Test: Pulse Width v 300 mS, Duty Cycle v 2%. 4. Not subject to production testing. http://onsemi.com 3 ms ms NGB8245N TYPICAL ELECTRICAL CHARACTERISTICS 400 30 TJ = 25C IA, AVALANCHE CURRENT (A) SCIS ENERGY (mJ) 350 300 250 TJ = 175C 200 150 100 VCC = 14 V VGE = 5.0 V RG = 1000 W 50 0 2 0 6 4 L = 1.8 mH 20 L = 3.0 mH 15 10 L = 10 mH 5 0 -50 10 8 VCC = 14 V VGE = 5.0 V RG = 1000 W 25 -25 INDUCTOR (mH) 60 2.0 IC = 25 A IC = 20 A 1.5 IC = 15 A 1.25 IC = 10 A 1.0 IC = 7.5 A 0.75 0.5 0.25 VGE = 4.5 V 0.0 -50 -25 0 25 50 75 100 125 150 50 75 100 125 150 175 4V TJ = 175C 40 3.5 V 30 3V 20 2.5 V 10 0 175 4.5 V 5V 0 1 2 3 4 5 6 7 8 VCE, COLLECTOR TO EMITTER VOLTAGE (V) Figure 3. Collector-to-Emitter Voltage vs. Junction Temperature Figure 4. Collector Current vs. Collector-to-Emitter Voltage 60 60 VGE = 10 V 50 4.5 V 4V IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) 50 VGE = 10 V TJ, JUNCTION TEMPERATURE (C) 5V 40 TJ = 25C 3.5 V 30 20 3V 10 0 25 Figure 2. Open Secondary Avalanche Current vs. Temperature IC, COLLECTOR CURRENT (A) VCE, COLLECTOR TO EMITTER VOLTAGE (V) Figure 1. Self Clamped Inductive Switching 1.75 0 TJ, JUNCTION TEMPERATURE (C) 2.5 V 0 1 2 3 4 5 6 7 VGE = 10 V 4V 5V 40 TJ = -40C 3.5 V 30 20 3V 10 0 8 4.5 V 50 2.5 V 0 VCE, COLLECTOR TO EMITTER VOLTAGE (V) 1 2 3 4 5 6 7 VCE, COLLECTOR TO EMITTER VOLTAGE (V) Figure 5. Collector Current vs. Collector-to-Emitter Voltage Figure 6. Collector Current vs. Collector-to-Emitter Voltage http://onsemi.com 4 8 NGB8245N TYPICAL ELECTRICAL CHARACTERISTICS 10000 COLLECTOR TO EMITTER LEAKAGE CURRENT (mA) IC, COLLECTOR CURRENT (A) 45 VCE = 5 V 40 1000 35 30 25 20 TJ = 25C 15 10 TJ = 175C 5 0 0 1 0.5 1.5 TJ = -40C 2 2.5 3 3.5 4 10 VCE = 200 V 1.0 0.1 -50 -25 0 25 75 50 100 125 150 175 TJ, JUNCTION TEMPERATURE (C) Figure 7. Transfer Characteristics Figure 8. Collector-to-Emitter Leakage Current vs. Temperature 10000 2.25 Mean Mean + 4 s 2.00 1.75 C, CAPACITANCE (pF) GATE THRESHOLD VOLTAGE (V) 100 VGE, GATE TO EMITTER VOLTAGE (V) 2.50 Mean - 4 s 1.50 1.25 1.00 0.75 0.50 Ciss 1000 Coss 100 Crss 10 1.0 0.25 0 -50 -25 0 25 50 75 100 125 150 0.1 175 5 10 15 20 VCE, COLLECTOR TO EMITTER VOLTAGE (V) Figure 9. Gate Threshold Voltage vs. Temperature Figure 10. Capacitance vs. Collector-to-Emitter Voltage 25 12 10 10 SWITCHING TIME (ms) tfall 8 tdelay 6 VCC = 300 V VGE = 5.0 V RG = 1000 W IC = 9.0 A RL = 33 W 4 2 0 25 0 TJ, JUNCTION TEMPERATURE (C) 12 SWITCHING TIME (ms) VCE = -24 V 50 75 100 125 150 8 VCC = 300 V VGE = 5.0 V RG = 1000 W IC = 9.0 A L = 300 mH tdelay 6 tfall 4 2 0 25 175 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) TJ, JUNCTION TEMPERATURE (C) Figure 11. Resistive Switching Fall Time vs. Temperature Figure 12. Inductive Switching Fall Time vs. Temperature http://onsemi.com 5 175 R(t), TRANSIENT THERMAL RESISTANCE (C/Watt) NGB8245N 100 Duty Cycle = 0.5 0.2 10 0.1 1 0.02 0.05 0.01 0.1 D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 P(pk) t1 t2 Single Pulse 0.01 0.000001 DUTY CYCLE, D = t1/t2 0.00001 0.0001 0.001 0.1 0.01 TJ(pk) - TA = P(pk) RqJA(t) For D=1: RqJC X R(t) for t 0.1 s 1 10 100 1000 t,TIME (S) RqJC(t), TRANSIENT THERMAL RESISTANCE (C/Watt) Figure 13. Minimum Pad Transient Thermal Resistance (Non-normalized Junction-to-Ambient) 1 Duty Cycle = 0.5 0.2 0.1 0.1 D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 P(pk) 0.05 t1 0.02 t2 0.01 0.01 0.000001 TJ(pk) - TA = P(pk) RqJC(t) DUTY CYCLE, D = t1/t2 Single Pulse 0.00001 0.0001 0.001 0.01 t,TIME (S) Figure 14. Best Case Transient Thermal Resistance (Non-normalized Junction-to-Case Mounted on Cold Plate) http://onsemi.com 6 0.1 1 NGB8245N PACKAGE DIMENSIONS D2PAK 3 CASE 418B-04 ISSUE K NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 418B-01 THRU 418B-03 OBSOLETE, NEW STANDARD 418B-04. C E -B- V W 4 1 2 A S 3 -T- SEATING PLANE K J G D W H 3 PL 0.13 (0.005) DIM A B C D E F G H J K L M N P R S V M T B M P U SOLDERING FOOTPRINT* L M INCHES MIN MAX 0.340 0.380 0.380 0.405 0.160 0.190 0.020 0.035 0.045 0.055 0.310 0.350 0.100 BSC 0.080 0.110 0.018 0.025 0.090 0.110 0.052 0.072 0.280 0.320 0.197 REF 0.079 REF 0.039 REF 0.575 0.625 0.045 0.055 MILLIMETERS MIN MAX 8.64 9.65 9.65 10.29 4.06 4.83 0.51 0.89 1.14 1.40 7.87 8.89 2.54 BSC 2.03 2.79 0.46 0.64 2.29 2.79 1.32 1.83 7.11 8.13 5.00 REF 2.00 REF 0.99 REF 14.60 15.88 1.14 1.40 STYLE 4: PIN 1. GATE 2. COLLECTOR 3. EMITTER 4. COLLECTOR 8.38 0.33 F VIEW W-W 1.016 0.04 10.66 0.42 17.02 0.67 5.08 0.20 3.05 0.12 SCALE 3:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NGB8245N/D