SPEC NO: T-406 PAGE NO: 1 of 4 PART NO: DPD090010-P1-SZ ~UNIT: mm | DATE: 03/19/00 All information contained herein applies only to the bove listed part number. Other versions of this part number with electrical or mechanical variations are available. Contact CUl Inc. for further assistance. 9615 SW Allen Bivd., Ste. 103, Beaverton OR 97005 800-275-4899 503-643-4899 * Fax: 503-643-6129 www.cui.com 1. MECHANICAL SPECIFICATION: 1.1 Apperance:Damage, Rust, Foam not permitted. 1.2 Pull Test for output cord: The output cord shall withstand a direct pull of 10 Kg applied for one minute without loosening, snapping and other damages. 1.3 Drop Test: The unit shall comply with article 2.4 without exposing live parts by crack or open of enclosure even if the unit shall dropped at 3 times from height of 91.5cm onto a flat oak+plywood board which is 60mm thick. 2. ELECTRICAL CHARACTERISTICS: 2.1 Primary rated voltage & frequency & power rating: 120 V 60 Hz 6 W. 2.2 Exciting Current:Input primary 120 V_ 60 Hz 50 mA MAX. 2.3 Secondary output voltage: Input Voltage|Output Voltage| Rated Current|No Load Voltage| Ripple Voltage 120V DC 9Vt5% DC 100 mA 2.4 Hi-Pot Test: Input 60Hz 1500 V for one minute between primary blades and output plug.between primary to Core.1000 V for one minute between secondary to core. (Leakage curren:i1 mA.) 2.5 Insulation Test: Insulation resistance between input and output plug and case, shall not be less than 100M ohms measured by 500 VDC: insulation resistance tester. 2.6 Humidity Test: Temp 40+2C relative humidity 90% R.H. for 96 hours, after keeping 30 minutes following insulation must be large than 5M ohms. 2.7 Temperature Rise Test:less than 70C for rated test with Resistance method. 3. Safety Standard: UL/CSA 4. Circuit Diagram: 1N4001 x2 1 ai 3 > 120V el s DC 9V 60Hz 37 100mA 2 5 4 PAGE NO: 2 of 4 UNIT: mm | DATE: 03/19/00 SPEC NO: T-406 PART NO: DPD090010-P1-SZ All information contained herein applies only p . ns of this part number with electrical or mechanical variations are available. Contact CUl Inc. for further assistance. 9615 SW Allen Bivd., Ste. 103, Beaverton OR 97005 800-275-4899 503-643-4899 Fax: 503-643-6129 www.cui.com 42.511 37ti x ee, 5 ts) Ss wo ) rm wo 0 Ln. eccreencemennrl ? ~~ a + ~ sO a ? z wt 3S 1.5+0/-0.1 3 & | | 12.7+0.13 14.540.5 an CAUTION RISK OF ELECTRIC SHOCK, DRY LOCATION USE ONLY ATTENTION POUR UTILISATION A LCINTERSEUR SEULEMENT | 63.520.1 SPEC NO: T-406 PAGE NO: 3 of 4 PART NO: DPD090010-P1-SZ All information contained herein applies only to the bove listed part number. Other versions of this part number with electrical or mechanical variations are available. Contact CUl Inc. for further assistance. 9615 SW Allen Bivd., Ste. 103, Beaverton OR 97005 800-275-4899 503-643-4899 * Fax: 503-643-6129 * www.cui.com UNIT: mm | DATE: 03/19/00 curstack CLASS 2 TRANSFORMER DPDO90010~P1-SZ INPUT: 120V AC 60Hz 4W OUTPUT: 9V DC 100mA = Ga E140808 LRegss3 MODEL: 36-9--100C EIA363 OOXX S MADE IN CHINA 33.740 /-0.2 |. 23.7+0 /-0.2-1 REMARKS: O00XX S O00 provides production year xx provides production week s Fu Yong Adhesion strength of specification label (Tape peeling test) Firmly apply pressure sensitive adhesive tape on the middle of the specification label to the lengthwise direction Pull the tape off quickly at a 90 angle to the surface of the label once. [Specification] There shall be no blistering or peeling of the specification label. [Used adhesive tape] 3m #44 Tape 18 width Thickness: 0.2mm Material: @ PVC QC) ALUMINIUM @) BLACK WORD ON SILVER BASE C) SILVER WORD ON BLACK BASE ) WHITE WORD ON BLACK BASE SPEC NO: T-406 PAGE NO: 4 of 4 UNIT: mm | DATE: 03/19/00 PART NO: DPD090010-P1-SZ All information contained herein applies only p . ns of this part number with electrical or mechanical variations are available. Contact CUl Inc. for further assistance. 9615 SW Allen Bivd., Ste. 103, Beaverton OR 97005 800-275-4899 503-643-4899 * Fax: 503-643-6129 www.cui.com 5 ES , UNIT: mm