Absolute Maximum Ratings
CONDITIONS SYMBOL RATING
RMS On-State Current (full sine wave) Tc = 100˚C TO-220AB IT(RMS) 25A
Tc = 75˚C TO-220AB Iso
Average On-State Current Tc = 100˚C TO-220AB IT(RMS) 16A
Tc = 75˚C TO-220AB Iso
Non Repetitive Surge Peak On-State Current F = 50 Hz 320A
(Full Cycle, Tj Initial = 25˚C) F = 60 Hz ITSM 350A
I2t Value for fusing tp = 10 ms I2t 510A2s
Critical rate of rise of on-state current
IG=2 x IGT , tr<100 ns, Tj = 125˚CF = 60 Hz di/dt 50A/µs
Peak Gate Current @ Tj = 125˚C tp = 20 µs IGM 4A
Average Gate Power Dissipation @ Tj = 125˚C PG(AV) 1W
Storage Temperature Range Tstg -40 to +150˚C
Operating Junction Temperature Range Tj-40 to +125˚C
Isolation Voltage (CYNA Series only) VISO 2500VRMS
Maximum Peak Reverse Gate Voltage VRGM 5V
Electrical Characteristics
NOTE 1
IGT MAX @ VD =12 V, RL = 30Ω40mA
VGT MAX @ VD =12 V, RL = 30Ω1.3V
VGD MIN @ VD =VDRM, RL = 3.3kΩTj = 125˚C0.2V
IHMAX @ IT= 500 mA (gate open) 50mA
ILMAX @ IG= 1.2 IGT 90mA
dv/dt MIN @ VD= 67%VDRM (gate open) Tj = 125˚C 1000V/µs
VTM MAX @ ITM =32 A, tp = 380µs Tj = 25˚C 1.6V
IDRM MAX @ VDRM = VRRM Tj = 25˚C 5µA
IRRM MAX @ VDRM = VRRM Tj = 125˚C 4mA
G
A
K
TO-220AB Isolated
(CYNA25)
TO-220AB Non-Isolated
(CYNB25)
G
A
A
K
G
A
K
GENERAL NOTES
1. All parameters at 25 degrees C unless otherwise specified.
#
Suitable for General Purpose AC Switching
#
IGT 40 mA Max.
#
Isolated and Non-Isolated Tab
#
V
DRM
/V
RMM
400, 600, 800, 1000V
Applications
• Motor Control
• Overvoltage Crowbar Protection
• Capacitive Discharge Ignition
• Voltage Regulation
• Welding Equipment
• Capacitive Filter Soft Start
(Inrush Current Control)
CYNA/CYNB 25
25Amp - 400/600/800/1000V - SCR
ISO9001 CERTIFIED
Competitive part number cross-reference available at:
www.cynergy3.com