General Purpose Relay G7J * Ideal for 3-phase motor control applications and resistive and inductive loads. * No contact chattering for momentary voltage drops up to 50% of rated voltage. * Withstands more than 4 kV between contacts that are of different polarity and between the coil and contacts. * Flame-resistant materials (UL94V-0) used for all insulation. * Push-to-test button on all models lets user check contact operation. * Class B coil insulation available. Ordering Information To Order: Select the part number and add the desired coil voltage rating (e.g., G7J-3A1B-B-AC100/120). Type Contact form Model Quick-connect terminal PCB mounting W-bracket (see note) Screw terminal PCB terminal 4PST-NO -- -- G7J-4A-P 3PST-NO/SPST-NC -- -- G7J-3A1B-P DPST-NO/DPST-NC -- -- G7J-2A2B-P 4PST-NO G7J-4A-T G7J-4A-B 3PST-NO/SPST-NC G7J-3A1B-T G7J-3A1B-B DPST-NO/DPST-NC G7J-2A2B-T G7J-2A2B-B Note: The G7J-B and G7J-T relays require a W-bracket for mounting. Order the bracket separately below. To order a relay and bracket packed together, add "-W1" to the part number before the coil voltage suffix. For example, G7J-2A2B-B-W1-AC100/120. Consult Omron for available versions. Accessories Types W-brackets Applicable relays Model G7J-4A-B, G7J-3A1B-B, G7J-2A2B-B, G7J-4A-T, G7J-3A1B-T, G7J-2A2B-T R99-04-FOR-G5F Typical Applications * * * * * Compressors for air conditioners and heater switching controllers. Switching controllers for power tools or motors. Lamp controls, motor drivers, and power supply switching controllers in copy machines, facsimile machines, and other office equipment. Power controllers for packers or food processing equipment. Power controllers for inverters. Specifications Contact Data Load Rated load Rated carry current Max. switching voltage Max. switching current Max. switching capacity Min. permissible load Resistive load (p.f. = 1) NO NC 25 A, 220 VAC (24 A, 230 VAC), 25 A, 30 VDC 8 A, 220 VAC (7.5 A, 230 VAC), 8 A, 30 VDC 25 A 8A 250 VAC,125 VDC 25 A 8A 5,500 VA, 750 W DC 1,760 VA, 240 W DC 100 mA, 24 VDC at 60 operations/minute, 23C (73F) ambient temperature) General Purpose Relay G7J 321 Coil Data AC Coil voltage Rated voltage (VAC) Rated current (mA) Coil resistance () 24 24 75 -- 50 50 36 -- 100/120 100 to 120 18 to 21.60 -- 200/240 200 to 240 9 to 10.80 -- Must operate Must release Max. voltage % of rated voltage 23C 75% max. 15% min. 110% Power consumption Approx.1.8 to 2.6 VA DC Coil voltage Rated voltage (VDC) Rated current (mA) Coil resistance () 12 12 167 72 24 24 83 288 48 48 42 1150 100 100 20 5000 110 110 18 6050 Must operate Must release Max. voltage % of rated voltage 75% max. 10% min. 110% Power consumption Approx. 2.0 W Note: 1. The rated current and coil resistance are measured at a coil temperature of 23C (73F) with tolerances of +15%/-20% for AC rated current and 15% for DC coil resistance. Performance characteristic data are measured at a coil temperature of 23C (73F). 2. The values given for AC rated current apply at 50 Hz or 60 Hz. Characteristics Contact resistance 50 m max. Operating time 50 ms max. Release time 50 ms max. Operating frequency Mechanical 1,800 operations/hour max. Electrical 1,800 operations/hour max. Insulation resistance 1,000 M minimum at 500 VDC Dielectric strength 4,000 VAC, 50/60 Hz for 1 minute between coil and contacts 4,000 VAC, 50/60 Hz for 1 minute between contacts of different polarity 2,000 VAC, 50/60 Hz for 1 minute between contacts of the same polarity Impulse withstand voltage 10,000 V between coil and contact with 1.2 x 50 s impulse wave Vibration Mechanical durability 10 to 55 Hz, 1.50 mm double amplitude Malfunction durability NO: 10 to 55 Hz, 1.50 mm double amplitude NC: 10 to 26 Hz, 1.50 mm double amplitude Shock Mechanical durability 1000 m/s2 (Approx. 100 G) Malfunction durability NO: 100 m/s2 (Approx. 10 G) NC: 20 m/s2 (Approx. 2 G) Service life Mechanical 1 million operations minimum at 1,800 operations/hour Electrical (@ 23C) 100,000 operations minimum at 1,800 operations/hour at rated load Ambient temperature Operating -25 to 60C with no icing or condensation Humidity Operating 5% to 85% RH Weight PCB terminal Approx. 140 g Screw terminal Approx. 165 g Quick-connect terminal Approx. 140 g Note: 1. Data shown are of initial value. 2. The contact resistance was measured with 1 A at 5 VDC using the voltage drop method. 3. The operate and release times were measured with the rated voltage imposed and with any contact bounce ignored at an ambient temperature of 23C. 4. The insulation resistance was measured with a 500-VDC megger applied to the same places as those used for checking the dielectric strength. Motor Load Item G7J-4A-P, G7J-3A1B-P, G7J-4A-B, G7J-3A1B-B, G7J-4A-T, G7J-3A1B-T Load 3, 220 VAC, 2.7 kW (with a inrush current of 78 A and a breaking current of 13 A) Endurance Electrical: 100,000 operations min. 322 General Purpose Relay G7J Engineering Data Maximum switching capacity Electrical service life 5,000 100 NO contact AC resistive load (p.f. = 1) AC inductive load (p.f. - 0.4) 70 50 NC contact AC resistive load (p.f. = 1) AC inductive load (p.f. - 0.4) 3,000 Life expectancy (x 103 operations) Switching current (A) 30 20 NO contact DC resistive load 10 7 5 3 NC contact DC resistive load 1,000 NO contact, 220 VAC 700 500 300 100 NC contact, 220 VAC 70 50 1 10 30 50 70 100 300 500 700 1,000 0 5 Switching voltage (V) Ambient Temperature vs. Must-operate and Must-Release Voltage 100 Must-operate voltage Must-release voltage Number of Relays: 5 80 30 Number of Relays: 5 40 20 -20 0 20 40 60 60 40 20 0 -40 80 -20 0 Ambient temperature (C) G7J 24 VDC 20 40 60 80 Ambient temperature (C) G7J-4A 24 VDC 100 Must-operate voltage Must-release voltage Number of Relays: 5 80 Number of Relays: 5 80 Coil temperature rise (C) Must-operate and reset voltage (%) 25 80 60 60 40 20 0 -40 20 G7J-4A 100 to 120 VAC 100 100 15 Ambient Temperature vs. Coil Temperature Rise Coil temperature rise (C) Must-operate and reset voltage (%) G7J 100 to 120 VAC 0 -40 10 Switching current (A) -20 0 20 40 60 80 Ambient temperature (C) 60 40 20 0 -40 -20 0 20 40 60 80 Ambient temperature (C) General Purpose Relay G7J 323 Malfunctioning Shock Y Terminals upwards 400 A1 downwards 400 200 X Button downwards Z 400 0 0 400 Z 400 Button upwards Energized Not energized Y 400 Y Unit: m/s2 A2 downwards X 200 Z Number of samples: 5 Measurement conditions: Increase and decrease the specified shock gradually imposed in X, Y, and Z directions three times each with the Relay energized and not energized to check the shock values that cause the Relay to malfunction. Criteria: There must not be any contact separation for 1 ms or greater with a shock of 100 m/s2 imposed when the coil is energized or with a shock of 20 m/s2 when the coil is not energized. Z X X Terminals downwards Y Shock direction Dimensions Unit: mm Relays PCB Terminals with PCB Mounting G7J-4A-P, G7J-3A1B-P, G7J-2A2B-P 33.5 max. 30 16 210.1 1.4 110.1 6.4 0.8 1.4 6 Twenty 1.8 dia. 1.5 40.4 0.15 51 max. 51.5 max. 30.8 0.15 11.6 0.1 21.2 0.1 2 4 Screw Terminals (requires W-bracket for mounting) G7J-4A-B, G7J-3A1B-B, G7J-2A2B-B Ten, M3.5 Two, 4.5 dia. or M4 34.5 max. 7.6 35 0.1 4.3 Note: W-bracket is sold separately. 64 max. 55.2 43.2 51.5 max. 324 General Purpose Relay G7J 2 Quick-connect Terminals (requires W-bracket for mounting) G7J-4A-T, G7J-3A1B-T, G7J-2A2B-T 34.5 max. 30 16 11.6 9.6 6.4 0.8 Two, 4.5 dia. or M4 4.3 10 Note: W-bracket is sold separately. 54.8 43.2 51.5 max. 64 max. 35 0.1 2 Accessories W-Bracket for G7J-B Relays with Screw Terminals R99-04-FOR-G5F 35 Two, 4.5 dia. Mounting Holes 24 Two, 4.5 dia. or M4 28 30 9 29 350.1 7 44 4.4 Terminal Arrangement - Internal Connections G7J-4A-P(B)(T) G7J-3A1B-P(B)(T) G7J-2A2B-P(B)(T) 14 13 14 13 24 23 24 23 34 33 34 33 44 43 42 41 A2 A1 A2 A1 14 13 24 23 32 31 42 41 A2 A1 General Purpose Relay G7J 325 Approvals UL Recognized (File No. E41643) / CSA Certified (File No. LR 35535) - - Ambient Temp = 40C Contact arrangement Normally Open Load type Contact ratings 25 A, 277 VAC, 30,000 cycles 25 A, 30 VDC, 30,000 25 A, 120 VAC, 30,000 cycles 25 A, 277 VAC, 30,000 cycles 25 A, 240 VAC, 100,000 cycles 1.5 kW, 120 VAC, 6,000 cycles 1.5 HP, 120 VAC, 1,000 cycles 3 HP, 240/265/277 VAC, 1,000 cycles 3-phase, 3 hp, 240/265/277 VAC, 30,000 cycles 3-phase, 5 hp, 240/265/277 VAC, 30,000 cycles 20 FLA/120 LRA, 120 VAC, 30,000 cycles 17 FLA/102 LRA, 277 VAC, 30,000 cycles TV-10, 120 VAC, 25,000 cycles 8 A, 277 VAC, 30,000 cycles 8 A, 30 VDC, 30,000 cycles 8 A, 120 VAC, 30,000 cycles 8 A, 277 VAC, 30,000 cycles Resistive General use Tungsten Motor load TV Resistive Normally Closed General use Note: 1. The rated values approved by each of the safety standards may be different from the performance characteristics individually defined in this catalog. 2. In the interest of product improvement, specifications are subject to change without notice. 3. CE marking is provided only on non-PCB terminal versions VDE (File No. 5381UG) Model Coil ratings Contact ratings NO contact G7J-4A-B(P) (T) G7J-2A2B(P) (T) G7J-3A1B-B(P) (T) 6, 12, 24, 48, 100 VDC 24, 50, 100 to 120, 200 to 240 VAC 25 A 240 VAC cos = 0.4 25 A 240 VAC cos = 1 25 A 30 VDC L/R 1 NC contact 8 A 240 VAC cos = 0.4 8 A 240 VAC cos = 1 8 A 30 VDC L/R 1 Note: Add the suffix "-KM" to the model number when ordering. Reference VDE approval: EN60255-1-00: 1997 EN60255-23: 1996 KEMA (File No. 2001291.02) Model Coil ratings Contact ratings NO contact G7J-4A-B(P) (T) (Z) G7J-2A2B(P) (T) 200 to 240 VAC G7J-3A1B-B(P) (T) (Z) 6, 12, 24, 48, 100 VDC 24, 50, 100 to 120, 200 to 240 VAC Note: Add the suffix "-KM" to the model number when ordering. Reference KEMA approval: 326 EN60947-4-1 for contacts General Purpose Relay G7J Class AC1: 25 A at 220 VAC 11.5 A at 380 to 480 VAC Class AC3: 11.5 A at 220 VAC and 8.5 A at 380 to 480 VAC Precautions Handling Connection * To preserve performance, do not drop or otherwise subject the G7J relay to shock. * The case is not designated to be removed during normal handling and operation. Doing so may affect performance. * Use the power relay in a dry environment free from excessive dust, SO2, H2S, or organic gas. Refer to the diagram below when connecting a wire to the screw terminals on G7J. * Do not allow a voltage greater than the maximum allowable coil voltage to be applied continuously. * Do not use the relay outside of specified voltages and currents. * Do not allow the ambient operation temperature to exceed the specified limit. Microloads The G7J is used for switching power loads. Do not use the G7J for switching minute loads, such as signals. Installation Although there are not specific limits on the installation site, it should be as dry and dust-free as possible. PCB terminal-equipped relays weigh approximately 140 g. Be sure that the PCB is strong enough to support them. OMRON recommends dual-side through-hole PCBs to reduce solder cracking from heat stress. 7.6 (0.299) 8.8 (0.346) 7 (0.276) 4.5 (0.177) M3.5 Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. Tighten the screw terminals to a torque of 0.78 to 1.18 N-m. Quick-connect Terminals Do not impose excessive external force on the G7J in the horizontal or vertical directions when inserting the G7J to the quick-connect terminals or when removing the terminals from the G7J. Do not attempt to insert or pull out more than one terminal at a time. Mount the G7J with its test button facing downwards. The relay may malfunction due to shock if the test button faces upwards. Be careful not to press the test button by mistake, because the contacts will actuate (ON) if the test button is pressed. If the normal mounting direction is not used, carbides or powder from contact abrasion that results from load switching will accumulate inside the relay. If the relay is used past its endurance in this state, insulation failure between circuits of different polarity or relay burning may occur. Be sure to use the test button for test purposes only. The test button is used for relay circuit tests, such as a circuit continuity test. Do not attempt to switch the load with the test button. If a voltage is applied to the coil, the test button will retract in an ON state (i.e., an excited state). Soldering PCB Terminals Be sure to solder the PCB terminals manually only. In the case of automatic soldering, some flux may stick to the test button and the relay. As a result, the G7J may malfunction. Cleaning PCB Terminals PCB terminals have semi-sealed construction which prevents flux from penetrating into the relay base housing due to capillary action. This type of relay cannot be immersed for cleaning. Do not wash with any water or detergent. General Purpose Relay G7J 327 Coil Internal Circuit If a transistor drives the G7J, then check the leakage current and connect a bleeder resistor if necessary. AC operating coil DC operating coil A2 A1 A2 A1 As a rule, either a DC battery or a DC power supply with a maximum of 5% ripple must be used for the operating voltage for DC relays. Before using a rectified AC supply, confirm that the ripple is not greater than 5%. Ripple greater than this can lead to variations in the operating and reset voltages. As excessive ripple can generate pulses, the insertion of a smoothing capacitor is recommended as shown below. The G7J incorporates a bridge rectifier circuit in the AC coil versions that prevents contact chatter or dropout during a voltage drop. This circuit allows the relays to withstand, with no vibration or shock, voltage drops to the coil of up to 50% of the rated coil voltage for one second maximum. Smoothing capacitor If a triac, such as an SSR, drives the G7J, the G7J may not release. Use a Power MOS FET in this case. Relay Ripple E min. E max. E mean DC fraction % of ripple = E max. - E min. x 100 E mean E max.:Maximum ripple E min.:Minimum ripple E mean:Mean DC voltage value When driving the coil with a transistor, check the leakage current and connect a bleeder resistor if necessary. 328 General Purpose Relay G7J MEMO General Purpose Relay G7J All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ON-LINE OMRON ELECTRONIC COMPONENTS LLC Global - http://www.omron.com USA - http://www.components.omron.com 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 Cat. No. X301-E-1b 09/11 General Purpose Relay Specifications subject to change without notice G7J Printed in USA