1 of 3 3
3M™ Heat Shrink Tubing MFP
Modified Polyvinylidene Fluoride
Data Sheet September 2013
Description
3MTM Heat Shrink Tubing MFP is a cross-linke d, thin-walled, heat-shrinkable tubing
offering a high degree of mechanical st rength and high-temperature resistance.
Fabricated from polyvinylidene fluoride, the tubing has outsta nding abrasion
resistance and cut-through propertie s in combination with high dielectric strength. It
is inherently flame retardant, semi-rigid and highly resistant to most industrial fuels,
chemicals and solvents. When heated in excess of 347°F (175° C ), MFP tubing
rapidly shrinks to a skintight fit.
Agency Approvals &
Self Certifications
Meets requirements of:
SAE-AMS-DTL-23053/8 and functional requirements of 23053/18, Class 1*
AMS-3632
UL Listed, UL File E-39100, VW-1
CSA LR38227, OFT
*Formerly: MIL-I-23053/8 and MIL-DTL-23053/8
MIL-I-23053/18 and MIL-DTL-23053/18
Applications
MFP tubing is typically used for shrink-fit protection and strain relief of wires, solder
joints, terminals and connections. Suggested applications include automotive
wiring, jackets, fuse coverings and military wire markers. Because the tubing is
transparent, it allows see-through inspe ction and identi f ication, and is ideal for use
as a jacketing for components such as resistors and capacitors. The tubing is
readily marked by hot-stamp and print-wheel equipment.
Shrink Ratio
MFP tubing has a 2:1 shrink ratio. When freely recovered, the tubing will shrink to
50% of its as-supplied internal diameter. The recovered wall thickness is
proportional to the degree of recovery.
The operating temperature range is from -55° C (-67°F) to 175°C (347°F ), with a
shrinking temperatu re minimum of 175°C (347°F)
3M™ Heat Shrink Tubing MFP
2 of 3
Standard Sizes and
Dimensions
Ordering
Size
(Nominal)
Expanded I.D.
(Minimum)
In. (mm)
Recovered I.D.
(Maximum
In. (mm)
Total Recovered Wall
Thickness (Nominal)
In. (mm)
3/64 .046 (1,17) .023 (0,58) .010 (0,25)
1/16 .063 (1,60) .031 (0,79) .010 (0,25)
3/32 .093 (2,36) .046 (1,17) .010 (0,25)
1/8 .125 (3,18) .062 (1,57) .010 (0,25)
3/16 .187 (4,75) .093 (2,36) .010 (0,25)
1/4 .250 (6,35) .125 (3,18) .012 (0,30)
3/8 .375 (9,53) .187 (4,75) .012 (0,30)
1/2 .500 (12,70) .250 (6,35) .012 (0,30)
5/8 .625 (15,88) .313 (7,94) .014 (0,36)
3/4 .750 (19,05) .375 (9,53) .017 (0,43)
1 1.000 (25,40) .500 (12,70) .019 (0,48)
Typical Properties
Not for specifications. Values are typical, not to be considered minimum or maxi mum.
Properties measured at room temperature 73°F (23° C) unless otherwise stated.
Physical Property Typical Value
Tensile Strength 5500 PSI
Ultimate Elongation 350%
Longitudinal Cha nge +1, -10%
Secant Modulus (2%) 123,000 PSI
Specific Gravity 1.7
Low Temperature Flexibility (outer wall only)
4 hrs @ -55 ºC
No cracking
Flammability
Self-extinguishing, UL24 VW-1 Test Pass
Electrical Property (Test Method) Typical Value
US units (metric)
Dielectric Strength 900 V/mil
Volume Resistivity 1014 ohm/cm
Chemical Property (Test Method) Typical Value
Corrosion Resistance Non-corrosive
Fuel & Oil Resistance Excellent
Solvent Absorption Excellent
Abrasion Resistan ce Excellent
Acid & alkalis Resistance Excellent
3M™ Heat Shrink Tubing MFP
3 of 3
3M is a trademark of 3M Company.
3
Electrical Markets Division
6801 River Place Blvd.
Austin, TX 78726-9000
800 676.8381
FAX: 800 828.9329
www.3M.com/oem
Please recycle
© 3M 2013 All rights reserved
78-8127-6766-9 Rev F
Standard Colors
Clear
Also available in Black. Price, MOQ and Lead Time will vary for these colors.
Please contact Local Sales Represe ntative or Customer Service Representative
for more information.
Shelf Life & Storage
3M™ Heat Shrink Tubing MFP has a 1 0-yea r shelf life from date of manufacture
when stored in a humidity controlled storage (10°C/50°F to 27°C/80°F and <75%
relative humidity).
Availability
Standard Packaging
Four-foot lengths. Colors available are subject to factory quotation.
Please contact your local distributor; av ailable from 3M.com/oem [Where to Buy] or
call 1-800-676-8381.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information
believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must
evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use. Any statements related to the product, which are not contained in 3M’s current
publications, or any contrary statements contained on your purchase order, shall have no force or effect unless
expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited
Remedy; Limited
Liability
This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product
or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any
indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal
theory asserted.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
3M:
MFP-2-48-Clear-Bulk MFP-1/4-48"-Clear-Bulk MFP-3/16-48"-Clear-Hdr MFP-1/4-48"-Clear-Hdr MFP-3/8-48"-Clear-
Hdr MFP-1/2-48"-Clear-Bulk MFP-1/8-48"-Clear-Bulk MFP-1-48"-Clear MFP-3/32-48"-Clear-Bulk MFP-3/4-48"-Clear-
Bulk MFP-3/8-48"-Clear-Bulk MFP-5/8-48"-Clear MFP-1-48"-Clear-Hdr MFP-3/4-48"-Clear MFP-3/32-48"-Clear-Hdr
MFP-1/8-48"-Clear-Hdr MFP-1/2-48"-Clear
