Siemens Aktiengesellschaft Order No.: C53000-G11 76-C186-3
Disclaimer of Liability
Although we have care fully checked the cont ents of this publication
for conformity with the hardware and software described, we cannot
guarantee complete conformity since errors cannot be excluded.
The information provided in this man ual is checked at re gular inter -
vals and any corrections that migh t become necessary are included
in the next releases. Any suggestions for improvement are wel-
come.
Subject to change without prior notice.
Document Release V04.20.01
Edition 11.2007
Copyright
Copyright © Siemens AG 2006
The reproduction, transmission or use of this document or its con-
tents is not permitted without express writt en authority. Offenders
will be liable for damages. All rights, including rights created by
patent grant or registration of a util ity model or design, are reserved.
Registered Trademarks
SIMATIC®, SIMATIC NET®, SIPROTEC®, DIGSI®, SICAM® and
SINAUT® are registered trademarks of SIEMENS AG. All other
product and brand names in this manual might be trademar ks, the
use of which by third persons for their purposes might infringe the
rights of their respective owners.
3SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
Preface
Purpose of this manual
In this Manual, you will find the
Specification of the applications of the IEC 61850 interface
General information about the effects of configuration of your device to the different Logical
Nodes and DOIs
Mapping of the information relevant to the device on the Logical Node of protocol IEC61850.
Target audience
This manual is intended mainly for all persons who configure, parameterize and operate a
SIPROTEC Device 7SD5, 7SD610, 7SA522, 7SA6 or 7VK61.
Scope of validity of this Manual
SIPROTEC 7SA6, Version 4.60 and higher
SIPROTEC 7SA522, Version 4.60 and higher
SIPROTEC 7SD5, Version 4.60 and higher
SIPROTEC 7SD610, Version 4.60 and higher
SIPROTEC 7VK61, Version 4.60 and higher
Standards This document has been created according to the ISO 9001 quality standards.
Further Support
If you have questions about SIPROTEC IEC 61850 interface, please contact your Siemens sales
representative.
4SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
5SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
Table of contents
1Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
1.2 Association model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.3 Server model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1.4 Data set model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1.5 Substitution model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
1.6 Setting group control model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1.7 Reporting model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
1.7.1 Unbuffered Report. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
1.7.2 Buffered Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1.8 Logging model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1.9 Generic substation model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
1.10 Transmission of sample values model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
1.11 Control model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
1.12 Time and time synchronisation model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
1.13 File transfer model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
1.14 General items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
1.15 TISSUES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
2Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
2.2 Effects of Configuration to the Logical Nodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
2.2.1 Function parameters general. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
2.2.2 Function parameters SIPROTEC 7SA6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
2.2.3 Function parameters SIPROTEC 7SA522. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
2.2.4 Function parameters SIPROTEC 7SD5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
2.2.5 Function parameters SIPROTEC 7SD610 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
2.2.6 Function parameters SIPROTEC 7VK61. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
2.3 Allocation of Logical Nodes to Logical Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
2.4 Logical Node LLN0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
2.4.1 Logical Device PROT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
2.4.2 Logical Devices MEAS, CTRL, DR and EXT. . . . . . . . . . . . . . . . . . . . . . . . . . . 59
2.5 The DOI Behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
2.5.1 Logical Device PROT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
2.5.2 Logical Devices MEAS, CTRL, DR and EXT . . . . . . . . . . . . . . . . . . . . . . . . . . 61
6SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
3.1 Differential Protection (PDIFx, PTRCx) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
3.1.1 I-DIFF> (PDIF1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
3.1.2 I-DIFF>> (PDIF2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
3.1.3 Differencial Protection General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
3.2 Distance Protection (PDISx, PTRC2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
3.2.1 Distance protection zone 1 (PDIS1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
3.2.2 Distance protection zone 1B (PDIS10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
3.2.3 Distance protection zone 2 (PDIS2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
3.2.4 Distance protection zone 3 (PDIS3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
3.2.5 Distance protection zone 4 (PDIS4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
3.2.6 Distance protection zone 5 (PDIS5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
3.2.7 Distance protection general info rmation (PTRC2) . . . . . . . . . . . . . . . . . . . . . . . 98
3.3 Power swing detection (RPSBx). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
3.3.1 Power swing detection zone 1 (RPSB1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
3.3.2 Power swing detection zone 1B (RPSB10). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
3.3.3 Power swing detection zone 2 (RPSB2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
3.3.4 Power swing detection zone 3 (RPSB3). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
3.3.5 Power swing detection zone 4 (RPSB4). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
3.3.6 Power swing detection zone 5 (RPSB5). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
3.3.7 Power swing trip command (RPSB6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
3.4 Teleprotection for distance protection (PSCH1). . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
3.5 Earth fault overcurrent protection in earthed systems (PTOCx). . . . . . . . . . . . . . . . 123
3.5.1 Earth fault 3I0 > (PTOC5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
3.5.2 Earth fault 3I0 >> (PTOC6). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
3.5.3 Earth fault 3I0 >>> (PTOC7). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
3.5.4 Earth fault 3I0p (PTOC8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
3.6 Earth fault detection in non-earthed systems (PSDE1) . . . . . . . . . . . . . . . . . . . . . . 131
3.7 Restricted earth fault protection (PDIF3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
3.8 Overcurrent protection (PTOCx). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
3.8.1 O/C Ip (PTOC1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
3.8.2 O/C I> (PTOC2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
3.8.3 O/C I>> (PTOC3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
3.8.4 O/C I>>> (PTOC4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
3.8.5 Directional O/C Ip (PTOC9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
3.8.6 Directional O/C I> (PTOC10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
3.9 Automatic reclosure function (RREC1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
3.10 Synchronism and voltage check (RSYN1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
7SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.11 Under and overvoltage protection (PTUVx, PTOVx). . . . . . . . . . . . . . . . . . . . . . . . 152
3.11.1 Under voltage protection Uph-e < (PTUV1). . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
3.11.2 Undervoltage protection Uph-e<< (PTUV2). . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
3.11.3 Undervoltage protection Uphph< (PTUV3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
3.11.4 Undervoltage protection Uphph<< (PTUV4) . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
3.11.5 Undervoltage protection U1< (PTUV5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
3.11.6 Undervoltage protection U1<< (PT UV6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
3.11.7 Overvoltage protection Uph> (PTOV1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
3.11.8 Overvoltage protection Uph-e>> (PTOV2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
3.11.9 Overvoltage protection Uphph> (PTOV3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
3.11.10 Overvoltage protection Uphph>> (PTOV4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
3.11.11 Overvoltage protection 3U0> (PTOV5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
3.11.12 Overvoltage protection 3U0>> (PTOV6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
3.11.13 Overvoltage protection U1> (PTOV7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
3.11.14 Overvoltage protection U1>> (PTOV8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
3.11.15 Overvoltage protection U2> (PTOV9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
3.11.16 Overvoltage protection U2>> (PTOV10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
3.12 Frequency protection (PTUFx, PTOFx). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
3.12.1 Underfrequency protection FQS stage f1 (PTUF1) . . . . . . . . . . . . . . . . . . . . . . 1 76
3.12.2 Underfrequency protection FQS stage f2 (PTUF2) . . . . . . . . . . . . . . . . . . . . . . 1 78
3.12.3 Underfrequency protection FQS stage f3 (PTUF3) . . . . . . . . . . . . . . . . . . . . . . 1 80
3.12.4 Underfrequency protection FQS stage f4 (PTUF4) . . . . . . . . . . . . . . . . . . . . . . 1 82
3.12.5 Overfrequency protection FQS stage f1 (PTOF1). . . . . . . . . . . . . . . . . . . . . . . 184
3.12.6 Overfrequency protection FQS stage f2 (PTOF2). . . . . . . . . . . . . . . . . . . . . . . 186
3.12.7 Overfrequency protection FQS stage f3 (PTOF3). . . . . . . . . . . . . . . . . . . . . . . 188
3.12.8 Overfrequency protection FQS stage f4 (PTOF4). . . . . . . . . . . . . . . . . . . . . . . 190
3.13 Fault locator (RFLO1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
3.14 Circuit breaker failure protection (RBRF1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
3.15 Thermal overload protection (PTTR1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx) . . . . . . . . . . . . . . . . . . . . 198
3.16.1 Threepole tripping (XCBR1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
3.16.2 Single-pole / threepole tripping (XCBR2, XC BR3, XCBR4). . . . . . . . . . . . . . . . 201
3.17 Tripping Logic of the Entire Device (PTRC1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
3.18 Device (LPHD1, CALH1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
3.18.1 Alarm-, Warn- and Group alarms (CALH1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
3.19 Measurements (MMXUx, MSQI1, MMTR1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
3.19.1 Measured values of local device (MMXU1). . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
3.19.2 Remote measured values of relay 1 (MMXU2) . . . . . . . . . . . . . . . . . . . . . . . . . 220
3.19.3 Remote measured values of relay 2 (MMXU3) . . . . . . . . . . . . . . . . . . . . . . . . . 223
3.19.4 Remote measured values of relay 3 (MMXU4) . . . . . . . . . . . . . . . . . . . . . . . . . 226
3.19.5 Remote measured values of relay 4 (MMXU5) . . . . . . . . . . . . . . . . . . . . . . . . . 229
3.19.6 Remote measured values of relay 5 (MMXU6) . . . . . . . . . . . . . . . . . . . . . . . . . 232
3.19.7 Remote measured values of relay 6 (MMXU7) . . . . . . . . . . . . . . . . . . . . . . . . . 235
3.19.8 Measured values, symmetrical components (MSQI1). . . . . . . . . . . . . . . . . . . . 238
3.19.9 Power Metering (MMTR1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
9SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
Applications 1
Contents This chapter specifies the protocol implementation extra information for testing (PIXIT) of the
IEC 61850 interface in SIPROTEC 7SD / 7SA / 7VK V4.6.
1.1 General 10
1.2 Association mode l 11
1.3 Server model 12
1.4 Data set model 13
1.5 Substitution model 14
1.6 Setting group control model 15
1.7 Reporting model 16
1.8 Logging model 19
1.9 Generic substation model 20
1.10 Transmission of sample values model 22
1.11 Control model 23
1.12 Time and time synchronisation model 25
1.13 File transfer model 26
1.14 General items 27
1.15 TISSUES 28
Applications
1.1 General
10 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
1.1 General
This chapter specifies the protocol implementation extra information for testing (PIXIT) of the
IEC 61850 interface in SIPROTEC 7SD / 7SA / 7VK V4.6.
It is based on the service subset definition given in the pr otocol implementation conformance
statement (PICS), which is specified within the user manual SIPROTEC 4 Ethernet Module
EN 100 IEC 61850 Electrical/optical Interface 100 MBit, Manual /1/ .
The following appli ca ble ACSI service models are specified:
Association model
Server model
Data set model
Substitutio n model
Setting group control model
Reporting model
Logging model
Generic substitution model
Transmission of sample values model
Control model
Time and time synchronisation model
File transfer model
General items
Together with the PICS and the MICS th e PIXIT forms the basis for a conformance test
according to IEC 61850-10.
The mapping between the IEC 61850 server data model and the SIPROTEC specific data is
specified in Chapter 3.
Applications
1.2 Association model
11SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
1.2 Association model
Description Value / Clarification
Maximum number of clients that can set-up
an association simultaneously 5
Lost connection detection time range
(default range of TCP_KEEPALIVE is 1 –
20 seconds)
10 seconds
Is authentication supported N
What called association parameters are
necessary for successful association ? Transport selector Y
Session selector Y
Presentation selector Y
AP Title ANY
AE Qualifier ANY
Where
Y means: as defined within the ICD-File
ANY means: any value accepted
What is the maximum and minimum MMS
PDU size ? Max MMS PDU size 32768
Min MMS PDU size
What is the typical startup time after a
power supply interrupt ? 15 SECONDS
<additional items>
Applications
1.3 Server model
12 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
1.3 Server model
Description Value / Clarification
Which analogue value (MX) quality bits are
supported (can be set by server) ? Validity:
Y Good,
Y Invalid,
N Reserved,
Y Questionable
Y Overflow
Y OutofRange
N BadReference
N Oscillatory
Y Failure
Y OldData
N Inconsistent
Y Inaccurate
Source:
Y Process
N Substituted
Y Test
Y OperatorBlocked
Which status value (ST) qual ity bits are
supported (can be set by server) ? Validity:
Y Good,
Y Invalid,
N Reserved,
Y Questionable
N BadReference
Y Oscillatory
Y Failure
Y OldData
N Inconsistent
N Inaccurate
Source:
Y Process
Y Substituted
Y Test
Y OperatorBlocked
What is the maximum number of data
values in one GetDataValues request ? Not restricted; depends on the max. MMS PDU size given
above.
What is the maximum number of data
values in one SetDataValues request ? Not restricted; depends on the max. MMS PDU size given
above. No Data Attribute within our object directory is
writable with the service SetDataV alues.
<additional items>
Applications
1.4 Data set model
13SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
1.4 Data set model
Description Value / Clarification
Maximum number of data elements in one
data set Not limited by an internal configuration parameter. It
depends on the available memory.
How many persistent data sets can be
created by one or more clients ? 64 data sets for each LD. It depends on the available
memory.
How many non-persistent data sets can be
created by one or more clients ? 10 data sets. It depends on the available memory.
additional items:
Maximum number of data sets Could not be defined, it depends on the available memory
space. In principle, this information it not necessary from
type conformance testing standpoint.
Applications
1.6 Setting group control model
15SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
1.6 Setting group control model
Description Value / Clarification
What is the number of supported setting
groups for each logical device ? Setting groups availabl e for LLN0 only in LD PROT. The
number of supported setting groups is 1 or 4, it depends
on the given configuration. Specified in the ICD-File.
What is the effect of when and how the
non-volatile storage is updated ?
(compare IEC 61850-8-1 $16.2.4)
Just SelectActiveSG service will supported ac cording to
PICS.
<additional items>
Applications
1.7 Reporting model
16 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
1.7 Reporting model
1.7.1 Unbuffered Report
Description Value / Clarification
The supported trigger conditions are Y Integrity
Y Data change
Y Quality change
Y Data update
Y General Interrogation
The supported optional fields are Y Sequence-number
Y Report-time-stamp
Y Reason-for-inclusion
Y Data-set-name
Y Data-reference
N Buffer-overflow
N EntryID
Y Conf-rev
Y Segmentation
Can the server send segmented reports ? Y
Mechanism on second internal data
change notification of the same analogue
data value within buffer period
(Compare IEC 61850-7-2 $14.2.2.9)
Send report immediately
Multi client URCB approach
(Compare IEC 61850-7-2 $14.2.1) All clients can access all URCB’s
additional items:
Interrupt of general interrogation Running GI could not be interrupted. If a new GI request
occurs during a running GI, the current GI will be finished
first before the second GI request will be processed.
Integrity period Configurable >=1 second;
Dynamic URCB reserva tion after an abort
of the client/server association Reservation of the URCB is lost. After a re-establishment
of the association the URCB reservation has to be done
by the client before. This behavior is implemented to
avoid unnecessary memory residuals if temporarily client
associations (e.g. for maintenance) are establis hed.
Configured URCB reservation after an
abort of the client/server association Reservation of the URCB is not lost.
Applications
1.7 Reporting model
17SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
1.7.2 Buffered Report
Description Value / Clarification
The supported trigger conditions are Y Integrity
Y Data change
Y Quality change
Y Data update
Y General Interrogation
The supported optional fields are Y Sequence-number
Y Report-time-stamp
Y Reason-for-inclusion
Y Data-set-name
Y Data-reference
Y Buffer-overflow
Y EntryID
Y Conf-rev
Y Segmentation
Can the server send segmented reports ? Y
Mechanism on second internal data
change notification of the same analogue
data value within buffer period
(Compare IEC 61850-7-2 $14.2.2.9)
Buffer the Entry
Send report if the report is enabled
Multi client BRCB approach
(Compare IEC 61850-7-2 $14.2.1) All clients can access all BRCB’s
What is the format of EntryID ? First 2 Byte : Integer
Last 6 Bytes: BTime6 time stamp
What is the buffer size for each BRCB or
how many reports can be buffered ? About 1 MB are available for the buffering.
Each BRCB has an extens i o n at tri b ut e Memo ry that
display the percentage of those 1 MB that have been
reserved/forseen for its own entries.
Default amount 1 MB/(2*Number of logical devices)
additional items:
Interrupt of general interrogation Runni ng GI could not be interrupted. If a new GI request
occurs during a running GI, the current GI will be finished
first before the second GI request will be processed.
Integrity period Configurable >=1 second;
Dynamic BRCB reservation after an abort
of the client/server association Reservation of the BRCB has been fixed with TISSUE
453.
The value of the attribute ResvTms delivers the time
interval during which the reservation is still active after the
connection has been lost. In case a BRCB is still
reserved, and a client connects with the same IP address
as the one used during the reservation, then the BRCB
attribute can be written by this client without prior setting
the ResvTms attribute as long as the reservation timer
has not expired.
Applications
1.7 Reporting model
18 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
Configured BRCB reservation after an
abort of the client/server association Reservation of the BRCB is not lost for BRCBs that have
been pre-associated to a specific client (pre-association
defined with means of the CLientLN element with the
BRCB instantiation in the SCD file).
Reservation of a BRCB is lost for BRCBs, that have not
been pre-associated to a specific client, after the
expiration of the reservation timer set with the ResvTms
attribute. In case ResvTms is not set (backward
compatibility), ResvTms will get a default value for all
preconfigured BRCBs that ar e not pre-associated to a
specific client.
Optional use of a flow control for
transmitting history of a BRCB As specified in the IEC61850-7-2, transmission of entries
may required some times, depending of the amount of
entries that have to be transmitted.
Therefore, the SIPROTEC has an optional flow control
feature to accelerate the transmission of the entries: each
BRCB has an extended attribute MaxOutReports that can
be set from the associated-client to change the
transmmision strategy of the entries. The number ordered
will then be transmitted as long as they exist in the buffer;
the server then reset the attribute to 0 and wait for the
client to set it again in order to continue the history
transmission with MaxOutReports entries. The attribute
only influences the flow control of entries while dealing
with the history, and not after the history transmission has
completed.
Applications
1.9 Generic substation model
20 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
1.9 Generic substation model
Description Value / Clarification
What is the behavior when one subscribed
GOOSE message isn’t received or
syntactically incorrect ?
The telegram will be discarded (i.e not forwarded to the
application) since it is corrupt or syntactically incorrect
and therefore not readable. The data objects will be
declared as invalid after a timeout detection since no
telegram have been received by the application.
What is the behavior when a subscribed
GOOSE message is out-of-order ? Error message will be stored into the error buffer (could
be accessed by EN100 web-server).
All expected data objects will be declared as invalid.
What is the behavior when a subscribed
GOOSE message is duplicated ? The sequence number given in the GOOSE-message is
out-of-order. Error message will be stored into the error
buffer (could be accessed by EN 100 web-server).
All expected data objects will be declared as invalid.
additional items:
Maximum number of GOOSE messages
which could be sent <= 16 ; It depends on the available memory.
Maximum number of GOOSE messages
which could be received <= 128 ; It depends on the available memory.
Interpretation of GOOSE messages at
subscriber side 1. Received GOOSE data objects without assigned
quality attri b ute are interpreted as invali d .
2. Received GOOSE data objects which quality attribute
are set to questionable are changed to inva lid.
GOOSE subscriber behavior in case of
missing GOOSE messages After a GOOSE multicast application association has
been interrupted, the reception of the second consecutive
GOOSE telegram is required to validate the state of this
GOOSE association again.
However, the IED tolerates a missing telegram as long as
the next telegram (expected n, received n+1) is received
within the time allowed to live time out detection (the time
allowed to live timeout detection occurs after 2*TAL).
GOOSE subscriber behaviour in case of
multiple GOOSE messages If a message is received twice or more, the IED already
reports an error after the second reception. Therefore,
network configuration error can be more easily tracked.
What is the behavior when a GOOSE
header parameter is mismatching with the
expected one?
(datSet, goID, confRev, numDatSetEntries,
number of allData)
Error message will be stored into the error buffer (could
be accessed by EN100 web-server).
All expected data objects will be declared as invalid.
What is the behavior when a
timeAllowedToLive is 0? Error message will be stored into the error buffer (could
be accessed by EN100 web-server) since the
timeAllowedToLive expired.
All expected data objects will be declared as invalid.
Applications
1.9 Generic substation model
21SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
What is the behavior when there is an out-
of-order entry in the allData? The confRev attribute in the header gu arantees that the
allData entries are in the correct order. Therefore, it’s
necessary to check the confRev attribute. There is no
chance to detect such an out-of-order.
What is the behavior when no telegram is
received within a TAL timeout? To avoid an incorrect timeout detection, the subscri ber
detects a timeout after a period of 2×TAL.
The information is then declared as questionable,
oldData.
What is the behavior when a GOOSE
header parameter goCBRef is mismatching
with the expected one?
Since the goCBRef shall be uni que stationwide, the
received telegram with the mismatched goCBRef will be
discarted: it has not been published. In that case only the
timeout detection will set the data to invalid.
What is the behavior when a GOOSE
header parameter APPID is mismatching
with the expected one?
The APPID is a link layer parameter. It is used as a filter
on link layer. If the APPID is mismatching, the tellegram
will therefore be discarded on link layer without notifying
the application. Only the timeout detection will set the
data to invalid.
What is the behavior when a GOOSE
header parameter t is not increasing? The t parameter is not checked. Therefore it doesn't lead
to any error detection.
What is the behavior when
numDatSetEntries and number of allData
are inconsistent?
The telegram is discarded since it is corrupt (not well
formed). After the timeout detection (no telegram
forwarded to the application) the data objects are
declared invalid.
Applications
1.10 Transmission of sample values model
22 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
1.10 Transmission of sample values model
Compare the “Implementation Guidelines for Electrical Current and Voltage Transducers
according to IEC 60044-7/8 with Digital Output according to IEC 61850-9-2; Version 1.0; as
specified by ABB, Areva, Landis+Gyr, OMICRON and SIEMENS
This service will not be supported (see also SIPROTEC 4 Eth ernet Module EN 100 IEC 61850
Electrical/optical Interface 100 MBit, Manual /1/).
Applications
1.11 Control model
23SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
1.11 Control model
Description Value / Clarification
What control models are supported ? Y Status-only
Y Direct-with-normal-security
N Sbo-with-normal-security
Y Direct-with-enhanced-security
Y Sbo-with-enhanced-security
Is Time activated operate (operTm)
supported N
What is the behavior when the test attribute
is set in the SelectWithValue and/or
Operate request ?
Will be acknowledged with negative response. The
AddCause attribute will be set to “no t supp orted”
What are the conditions for the time (T)
attribute i n the SelectWithValue and/or
Operate request ?
Time attribute is not relevant.
Is “operate-many” supported ? N
Is pulse configuration supported ? N
What check conditions are suppo rted ? Y Synchrocheck
Y Interlock-check
What service error types are supported ? Y Instance-not-available
Y Instance-in-use
Y Access-violation
Y Access-not-allowed-in -current-state
Y Parameter-value-inappropriate
Y Parameter-value-inconsistent
Y Class-not-supported
Y Instance-locked-by-other-client
Y Control-must-be-selected
Y Type-conflict
Y Failed-due-to-communications
Y Constraint failed-due-to-server-constrai nt
Applications
1.11 Control model
24 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
What additional cause diagnosis are
supported ? N Blocked-by-switching-hierarchy
Y Select-failed
Y Invalid-position
Y Position-reached
Y Parameter-change-in-execution
Y Step-limit
Y Blocked-by-Mode
Y Blocked-by-process
Y Blocked-by-interlocking
Y Blocked-by-synchrocheck
Y Command-already-in-execution
N Blocked-by-health
Y 1-of-n-control
Y Abortion-by-canc el
Y Time-limit-over
N Abortion-by-trip
Y Object-not-selected
additional items:
What additional cause diagnosis
extensions are supported ? Y Plausibility_error
Y Parameter_setting_invalid
Y Hardware_error
Y System_overload
Y Internal_fault
Y Command_sequence_error
Changing the control services by
configuration N
Inconsistency between Select and
(Oper or cancel) Oper or cancel will be acknowledged with negative
response if inconsistencies to the select request are
detected.
The following attributes will not be checked in this case:
T (Time)
Cancel request could be sent after an
operate request. Y
Format of the control time stamp attrib ute ? TimeStamp instead of EntryTime
acc. to the 7-2 Errata List.
Negative response for select request could
be performed only If test mode is activated or
If the selection is always done.
Applications
1.12 Time and time synchronisation model
25SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
1.12 Time and time synchronisation model
Description Value / Clarification
What kind of quality bits are supported ? N LeapSecondsKnown
Y ClockFailure
Y ClockNotSynchronized
What kind of quality accuracy bi ts are
supported ? Y Invalid
N Unspecified
What is the behavior when the time
synchronization signal/messages are lost ? The quality attribute “ClockFailure” will be set to TRUE
after a configured ti me period.
What is the behaviour when the time
synchronisation messages indicate that the
stratum is greater than 3?
A stratum with a value greater than 3 with the SNTP time
synchronization messages indicates that the time server
has a questionable synchronisation.
It might also indicate that no GPS connection are
available.
Therefor e th e ti me qu al i ty attribute
“ClockNotSynchronized” will be set to TRUE as long as
the stratum content is greater than 3.
additional items:
What is the behavior at start up time when
a time synchronization via SNTP is
configured ?
The “ClockNotSynchronized” attribute is set to TRUE as
long as no time synchronization is established.
Applications
1.13 File transfer model
26 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
1.13 File transfer model
Description Value / Clarification
What is stru cture of files and directories? Directory name / COMTRADE / *;
Directory name / LD / *;
Files according to the comtrade standard.
What is the resulting behavior if no file
specification is present in the file directory
request?
If no file specification is present in the directory request,
all files are returned - not only the files in the root
directory.
Is the IETF FTP protocol also implemented ? N
Directory names are separated from the file
name by “/”
The maximum file name size including path
(default 64 chars) 64
Are directory/file name case sensitive Case sensitive
Maximum file size Not limited by implementation or configuration. Depends
on available memory.
additional items:
Maximum number of clients that can use the
FTP service simultaneously 1
Maximum number of files that can be
accessed simultaneously 1
Applications
1.14 General items
27SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
1.14 General items
Description Value / Clarification
IED behavior when the Logical Device
is blocked : LLN0.Mod.stVal = blocked Unlike the de finition of the Dat a Object s “Mod/Beh” in IEC
61850-7-4, outputs to the process will be gene rated.
Details to this behavior are specified in SIPROTEC 4
Ethernet Module EN 100 IEC 61850 Electrical/optical
Interface 100 MBit, Manual /1/
additional items:
GOOSE Proxy object To be able to subscribe Data over GOOSE, Proxy
Objects are added into the object directory.
Typically, they are Data of GGIO logical nodes:
SPCSOxx, DPCSOxx, ISCSOxx.
The Data Attributes of those Data are ctlVal, q and t.
The control model associated to those Data is status-only.
They are not controllable from an IEC618 50 client, and
their function is only to enable the GOOSE subscribing.
What is the type of the attribute actVal in
the BCR (Binary Counter Reading) CDC? The type is integer 32 (INT32).
Applications
1.15 TISSUES
28 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
1.15 TISSUES
Topic TISSUE
-No. Link Description Impact of
Interoper.
Object
Directory 433 http://www.tissue.iec61850.com/
tissue.mspx?issueid=433 Order of attributes i n
specialized CDCs for
control service mapping
-
422 http://www.tissue.iec61850.com/
tissue.mspx?issueid=422 Order of extension data
objects and data
attributes
-
168 http://www.tissue.iec61850.com/
tissue.mspx?issueid=168 Order of attributes i n
MMS components -
Object Model 120 http://www.tissue.iec61850.com/
tissue.mspx?issueid=120 Type - Mod.stVal and
Mod.ctlVal -
146 http://www.tissue.iec61850.com/
tissue.mspx?issueid=146 CtxInt -
173 http://www.tissue.iec61850.com/
tissue.mspx?issueid=173 Ctl modelling
harmonization -
234 http://www.tissue.iec61850.com/
tissue.mspx?issueid=234 New type CtxInt x
Services 377 http://www.tissue.iec61850.com/
tissue.mspx?issueid=377 DeleteDataSet response- -
276 http://www.tissue.iec61850.com/
tissue.mspx?issueid=276 File Services Negative
Responses -
183 http://www.tissue.iec61850.com/
tissue.mspx?issueid=183 GetNameList error
handling x
165 http://www.tissue.iec61850.com/
tissue.mspx?issueid=165 Improper Error Response
for GetDataSetValues x
116 http://www.tissue.iec61850.com/
tissue.mspx?issueid=116 GetNameList with empty
response? x
Reporting 474 http://www.tissue.iec61850.com/
tissue.mspx?issueid=474 GI for URCB -
453 http://www.tissue.iec61850.com/
tissue.mspx?issueid=453 Reporting & Logging
model revision x
438 http://www.tissue.iec61850.com/
tissue.mspx?issueid=438 EntryTime base should
be GMT -
349 http://www.tissue.iec61850.com/
tissue.mspx?issueid=349 BRCB TimeOfEntry has
two definitions x
348 http://www.tissue.iec61850.com/
tissue.mspx?issueid=348 URCB class and report x
Applications
1.15 TISSUES
29SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
Reporting 344 http://www.tissue.iec61850.com/
tissue.mspx?issueid=344 TimeOfEntry misspelled -
335 http://www.tissue.iec61850.com/
tissue.mspx?issueid=335 Clearing of Bufovfl x
332 http://www.tissue.iec61850.com/
tissue.mspx?issueid=332 Ambiguity in use of
trigger options x
329 http://www.tissue.iec61850.com/
tissue.mspx?issueid=329 Reporting and BufOvl x
322 http://www.tissue.iec61850.com/
tissue.mspx?issueid=322 Write Configuration
attribute of BRCBs
301 http://www.tissue.iec61850.com/
tissue.mspx?issueid=301 SqNum in Buffered
Reports -
300 http://www.tissue.iec61850.com/
tissue.mspx?issueid=300 Attribute Resv in BRCB x
298 http://www.tissue.iec61850.com/
tissue.mspx?issueid=298 Type of SqNum x
297 http://www.tissue.iec61850.com/
tissue.mspx?issueid=297 Sequence number x
278 http://www.tissue.iec61850.com/
tissue.mspx?issueid=278 EntryId not valid for a
server x
275 http://www.tissue.iec61850.com/
tissue.mspx?issueid=275 Confusing statement on
GI usage x
191 http://www.tissue.iec61850.com/
tissue.mspx?issueid=191 BRCB: Integrity and
buffering reports x
190 http://www.tissue.iec61850.com/
tissue.mspx?issueid=190 BRCB: EntryId and
TimeOfEntry x
177 http://www.tissue.iec61850.com/
tissue.mspx?issueid=177 Ignoring OptFlds bits for
URCB -
52 http://www.tissue.iec61850.com/
tissue.mspx?issueid=52 Ambiguity GOOSE
SqNum x
49 http://www.tissue.iec61850.com/
tissue.mspx?issueid=49 BRCB TimeOfEntry? x
Control Model 46 http://www.tissue.iec61850.com/
tissue.mspx?issueid=46 Synchro check cancel x
44 http://www.tissue.iec61850.com/
tissue.mspx?issueid=44 AddCause - Object not
sel x
30 http://www.tissue.iec61850.com/
tissue.mspx?issueid=30 control parameter T x
Applications
1.15 TISSUES
30 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
31SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
Basics 2
Contents This chapter contains general information about the effects of device configuration on Logical
Nodes and DOIs.
2.1 General 32
2.2 Effects of Configuration to the Logical Nodes 34
2.3 Allocation of Logical Nodes to Logical Devices 54
2.4 Logical Node LLN0 58
2.5 The DOI Behavior 60
Basics
2.1 General
32 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
2.1 General
The protocol IEC 61850 was develope d to define a standard that can be internationally
employed for the transmission of power automation system data.
This cross national standard enables an interopera bility between automation systems and
devices made by different manufacturers.
The devices and high voltage bay control units of the SIPROTEC 4 series can be equipped with
an Ethernet module EN100 via which the protocol IEC 61850 is interpre ted.
The configuration of the protocol and the integration of the device with redundant IEC 61850
interfaces in your network are performed via the configuration system DIGSI.
For details please refer to the manuals:
SIPROTEC 4 Ethernet Module EN 100 IEC 61850 Electrical /optical Interface 100 MBit,
Manual /1/ and
SIPROTEC 4 System Description /2/.
Logical Devices
LD Logical Devices represent a functional structuring of the LN Logical Nodes of a SIPROTEC
device.
The following Logical Devices are present:
Logical Device Protection PROT
Logical Device Measurement MEAS
Logical Device Disturbance Recorder DR
Logical Device Control CTRL
Logical Device Extended EXT
Each LD contains LN LLN0 and LN LPHD1.
The allocation of the Logical Nodes to the Logical Devices is listed in Chapter 2.3.
Note
The following definitions are taken mainly from standard IEC 61850, Tech nical Specification
IEC TS 61850-2.
Basics
2.1 General
33SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
Logical Node L N
Smallest part of a function that exchanges data. A logical node is an object defined by its data
and methods.
Data object instance DOI
A Data object is part of a logical node object representing specific information for example status
of measurement. From an object-oriented poi nt of view, a data object is an instance of a data
class. Specific data classes carry the semantic within a logical node.
Data attribute instance DAI
A Data attribute defines the name (sem antic), format, range of possible values, and
representation of values while being communicated.
Annunciation types via GOOSE
Generic Object Oriented Substation Event
A GOOSE report enables high speed trip signals to be issued with a high probability of delivery.
The following types of information can be configured via GOOSE.
External single point indicatio n O/O
External single point indicatio n I/O
External double point indi cation
External double point indication, fast
External operational measured values
External metered values
Basics
2.2 Effects of Configuration to the Logical Nodes
34 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
2.2 Effects of Configuration to the Logical Nodes
2.2.1 Function parameters general
Depending on the configuration of the function parameters the functions of the SIPROTEC are
enabled or disabled. If a function is disabled, the corresponding Logical Node is not available.
The following Logical Nodes are always available:
Logical Device Protection: LLN0, LPHD1, PTRC1
Logical Device Measurement: LLN0, LPHD1, MMXU1,
MMTR1, MSQI1
Logical Device Disturbance Recorder: LLN0, LPHD1
Logical Device Control: LLN0, LPHD1, CALH1
Basics
2.2 Effects of Configuration to the Logical Nodes
35SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
2.2.2 Function parameters SIPROTEC 7SA6
The following table shows which Logical Nodes are available when setting the correspondin g
function parameter.
The setting (-) implies that no corresponding LN is available.
Table 2-1 SIPROTEC 7SA6 - Effects of Function parameters to the Logical Nodes
No. Funktion Setting Logical Node s
103 Setting Group Change Option No effect
Disturbance Recorder - RDRE1
110 Trip mode 3pole only XCBR1
1-/3pole XCBR2, XCBR3, XCBR4
114 Distance protection pickup program Disabled -
Z< (quadrilat.) PDIS1 – PDIS5, PTRC2
I> (overcurr.) -
U/I -
U/I/ϕ-
115 Characteris tic of distance zones No effect
120 Power Swing detection Disabled -
Enabled RPSB1 – RPSB6
121 Teleprotection for Distance protection Disabled -
PUTT (Z1B) PSCH1
PUTT (Pickup) PSCH1
POTT PSCH1
Dir.Comp.Pickup PSCH1
Unblocking PSCH1
Blocking PSCH1
Rev. Interlock PSCH1
Pilot wire comp PSCH1
Basics
2.2 Effects of Configuration to the Logical Nodes
36 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
122 DTT Direct Transfer Trip No effect
124 Instantaneous HighSpeed SOTF
Overcurrent No effect
125 Weak Infeed (Trip and/or Echo) No effect
126 Backup overcurrent Disabled -
TOC IEC PTOC1 - PTOC3
TOC IEC /w 3ST PTOC1- PTOC4
TOC ANSI PTOC1- PTOC4
130 Sensitive Earth Flt.(comp/ isol. starp.) Disabled -
Enabled PSDE1
131 Earth fault overcurrent Disabled -
TOC IEC PTOC5 – PTOC8
TOC ANSI PTOC5 – PTOC8
TOC Logarithm. PTOC5 – PTOC8
Definite Time PTOC5 – PTOC7
U0 invers PTOC5 – PTOC8
Sr inverse PTOC5 – PTOC8
132 Teleprotection for Earth fault overcurrent No effect
Table 2-1 SIPROTEC 7SA6 - Effects of Function parameters to the Logical Nodes (Cont.)
No. Funktion Setting Logical Nodes
Basics
2.2 Effects of Configuration to the Logical Nodes
37SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
133 Auto-Reclose Func tion Disabled -
1 AR-cycle RREC1
2 AR-cycles RREC1
3 AR-cycles RREC1
4 AR-cycles RREC1
5 AR-cycles RREC1
6 AR-cycles RREC1
7 AR-cycles RREC1
8 AR-cycles RREC1
ADT RREC1
134 Auto-Reclose control mode No effect
135 Synchronism and Voltage Check Disabled -
Enabled RSYN1
136 Over / Underfrequency Protection Disabled -
Enabled PTOF1 – PTOF4,
PTUF1 – PTUF4
137 Under / Overvoltage Protection Disabled -
Enabled PTUV1 – PTUV6,
PTOV1 – PTOV10
Enabl. w. comp. PTUV1 –PTUV6,
PTOV1 – PTOV10
138 Fault Lo ca to r Disabled -
Enabled RFLO1
with BCD-output RFLO1
Table 2-1 SIPROTEC 7SA6 - Effects of Function parameters to the Logical Nodes (Cont.)
No. Funktion Setting Logical Node s
Basics
2.2 Effects of Configuration to the Logical Nodes
38 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
139 Breaker Failure Protection Disabled -
Enabled RBRF1
enabled w/ 3I0> RBRF1
140 Trip Circuit Supervision Disabled -
1 Trip Circuit XCBR1.CirSpv -
XCBR4.CirSpv
2 Trip Circuits XCBR1.CirSpv -
XCBR4.CirSpv
3 Trip Circuits XCBR1.CirSpv -
XCBR4.CirSpv
142 Thermal overload protection Disabled -
Enabled PTTR1
145 Protection Interface 1 (Port D) Disabled -
Enabled MMXU2 - MMXU4
147 Number of relays 2 relays, Protection
Interface 1 disabled -
2 relays, Protection
Interface 1 enabled MMXU2, MMXU3
3 relays MMXU2, MMXU3, MMXU4
150 Analog Output B1 (Port B) No effect
151 Analog Output B2 (Port B) No effect
152 Analog Output D1 (Port D) No effect
153 Analog Output D2 (Port D) No effect
Table 2-1 SIPROTEC 7SA6 - Effects of Function parameters to the Logical Nodes (Cont.)
No. Funktion Setting Logical Nodes
Basics
2.2 Effects of Configuration to the Logical Nodes
39SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
2.2.3 Function parameters SIPROTEC 7SA522
The following table shows which Logical Nodes are available when setting the correspondin g
function parameter.
The setting (-) implies that no corresponding LN is available.
Table 2-2 SIPROTEC 7SA522 - Effects of Function parameters to the Logical Nodes
No. Funktion Setting Logical Node s
103 Setting Group Change Option No effect
Disturbance Recorder - RDRE1
110 Trip mode 3pole only XCBR1
1-/3pole XCBR2, XCBR3, XCBR4
112 Phase Distance Disabled -
Quadrilateral PDIS1 – PDIS5, PTRC2
MHO PDIS1 – PDIS5, PTRC2
113 Earth Distance Disabled -
Quadrilateral PDIS1 – PDIS5, PTRC2
MHO PDIS1 – PDIS5, PTRC2
120 Power Swing detection Disabled -
Enabled RPSB1 – RPSB6
121 Teleprotection for Distance protection Disabled -
PUTT (Z1B) PSCH1
POTT PSCH1
Unblocking PSCH1
Blocking PSCH1
SIGNALv.ProtInt PSCH1
122 DTT Direc t Transfer Trip No effect
124 Instantaneous HighSpeed SOTF
Overcurrent No effect
Basics
2.2 Effects of Configuration to the Logical Nodes
40 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
125 Weak Infeed (Trip and/or Echo) No effect
126 Backup overcurrent Disabled -
TOC IEC PTOC1 – PTOC3
TOC IEC /w 3ST PTOC1 - PTOC4
TOC ANSI PTOC1 - PTOC4
131 Earth fault overcurrent Disabled -
TOC IEC PTOC5 – PTOC8
TOC ANSI PTOC5 – PTOC8
TOC Logarithm. PTOC5 – PTOC8
Definite Time PTOC5 – PTOC7
U0 invers PTOC5 – PTOC8
Sr inverse PTOC5 – PTOC8
132 Teleprotection for Earth fault overcurrent No effect
133 Auto-Reclose Function Disabled -
1 AR-cycle RREC1
2 AR-cycles RREC1
3 AR-cycles RREC1
4 AR-cycles RREC1
5 AR-cycles RREC1
6 AR-cycles RREC1
7 AR-cycles RREC1
8 AR-cycles RREC1
ADT RREC1
134 Auto-Reclose control mode No effect
Table 2-2 SIPROTEC 7SA522 - Effects of Function parameters to the Logical Nodes (Cont.)
No. Funktion Setting Logical Nodes
Basics
2.2 Effects of Configuration to the Logical Nodes
41SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
135 Synchronism and Voltage Check Disabled -
Enabled RSYN1
136 Over / Underfrequency Protection Disabled -
Enabled PTOF1 – PTOF4,
PTUF1 – PTUF4
137 Under / Overvoltage Protection Disabled -
Enabled PTUV1 – PTUV6,
PTOV1 – PTOV10
Enabl. w. comp. PTUV1 –PTUV6,
PTOV1 – PTOV10
138 Fault Lo ca to r Disabled -
Enabled RFLO1
with BCD-output RFLO1
139 Breaker Failure Protection D isabled -
Enabled RBRF1
enabled w/ 3I0> RBRF1
140 Trip Circuit Supervision Disabled -
1 T rip Circuit XCBR1.CirSpv -
XCBR4.CirSpv
2 Trip Circuits XCBR 1.CirSpv -
XCBR4.CirSpv
3 Trip Circuits XCBR 1.CirSpv -
XCBR4.CirSpv
145 Protection Interface 1 (Port D) Disabled (Prot.
Interf. 2 disabled) -
Disabled (Prot.
Interf. 2 enabled) MMXU2 - MMXU4
Enabled MMXU2 - MMXU4
Table 2-2 SIPROTEC 7SA522 - Effects of Function parameters to the Logical Nod es (Cont.)
No. Funktion Setting Logical Node s
Basics
2.2 Effects of Configuration to the Logical Nodes
42 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
146 Protection Interface 2 (Port E) Disabled (Prot.
Interf. 1 disabled) -
Disabled (Prot.
Interf. 1 enabled) MMXU2 - MMXU4
Enabled MMXU2 - MMXU4
147 Number of relays 2 rela ys, no
Protection Interface -
2 relays, min. 1
Protection Interface MMXU2, MMXU3
3 relays MMXU2, MMXU3, MMXU4
Table 2-2 SIPROTEC 7SA522 - Effects of Function parameters to the Logical Nodes (Cont.)
No. Funktion Setting Logical Nodes
Basics
2.2 Effects of Configuration to the Logical Nodes
43SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
2.2.4 Function parameters SIPROTEC 7SD5
The following table shows which Logical Nodes are available when setting the correspondin g
function parameter.
The setting (-) implies that no corresponding LN is available.
Table 2-3 SIPROTEC 7SD5 - Effects of Function parame ters to the Logica l Nodes
No. Funktion Setting Logical Node s
103 Setting Group Change Option No effect
Disturbance Recorder - RDRE1
110 Trip mode 3pole only XCBR1
1-/3pole XCBR2, XCBR3, XCBR4
112 Differential protection Disabled -
Enabled PDIF1, PDIF2, PTRC3
115 Phase Distance Disabled -
Quadrilateral PDIS1 – PDIS5, PTRC2
MHO PDIS1 – PDIS5, PTRC2
116 Earth Distance Disabled -
Quadrilateral PDIS1 – PDIS5, PTRC2
MHO PDIS1 – PDIS5, PTRC2
117 Distance protection pickup program No effect
120 Power Swing detection Disabled -
Enabled RPSB1 – RPSB6,
RPSB10
Basics
2.2 Effects of Configuration to the Logical Nodes
44 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
121 Teleprotection fo r Di s tance protecti on Dis ab l ed -
PUTT (Z1B) PSCH1
PUTT (Pickup) PSCH1
POTT PSCH1
Dir.Comp.Pickup PSCH1
Unblocking PSCH1
Blocking PSCH1
Rev. Interlock PSCH1
Pilot wire comp PSCH1
122 DTT Direct Transfer Trip No effect
124 Instantaneous HighSpeed SOTF
Overcurrent No effect
125 Weak Infeed (Trip and/or Echo) No effect
126 Backup overcurrent Disabled -
TOC IEC PTOC1 – PTOC4, PTOC9,
PTOC10
TOC ANSI PTOC1 – PTOC4, PTOC9,
PTOC10
131 Earth fault overcurrent Disabled -
TOC IEC PTOC5 – PTOC8
TOC ANSI PTOC5 – PTOC8
TOC Logarithm. PTOC5 – PTOC8
Definite Time PTOC5 – PTOC7
U0 invers PTOC5 – PTOC8
Sr inverse PTOC5 – PTOC8
132 Teleprotection for Earth fault overcurrent No effect
Table 2-3 SIPROTEC 7SD5 - Effects of Function parameters to the Logical Nodes (Cont.)
No. Funktion Setting Logical Nodes
Basics
2.2 Effects of Configuration to the Logical Nodes
45SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
133 Auto-Reclose Func tion Disabled -
1 AR-cycle RREC1
2 AR-cycles RREC1
3 AR-cycles RREC1
4 AR-cycles RREC1
5 AR-cycles RREC1
6 AR-cycles RREC1
7 AR-cycles RREC1
8 AR-cycles RREC1
ADT RREC1
134 Auto-Reclose control mode No effect
135 Synchronism and Voltage Check Disabled -
Enabled RSYN1
136 Over / Underfrequency Protection Disabled -
Enabled PTOF1 – PTOF4,
PTUF1 – PTUF4
137 Under / Overvoltage Protection Disabled -
Enabled PTUV1 – PTUV6,
PTOV1 – PTOV10
Enabl. w. comp. PTUV1 –PTUV6,
PTOV1 – PTOV10
138 Fault Lo ca to r Disabled -
Enabled RFLO1
with BCD-output RFLO1
Table 2-3 SIPROTEC 7SD5 - Effects of Function parameters to the Logical Nodes (Cont.)
No. Funktion Setting Logical Node s
Basics
2.2 Effects of Configuration to the Logical Nodes
46 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
139 Breaker Failure Protection Disabled -
Enabled RBRF1
enabled w/ 3I0> RBRF1
140 Trip Circuit Supervision Disabled -
1 Trip Circuit XCBR1.CirSpv -
XCBR4.CirSpv
2 Trip Circuits XCBR1.CirSpv -
XCBR4.CirSpv
3 Trip Circuits XCBR1.CirSpv -
XCBR4.CirSpv
141 Restricted earth fault protection Disabled -
Enabled PDIF3
142 Thermal overload protection Disabled -
Enabled PTTR1
143 Transformer inside protection zone No effect
144 Voltage transformers No effect
145 Protection Interface 1 (Port D) Disabled (Prot.
Interf. 2 disabled) -
Disabled (Prot.
Interf. 2 enabled) MMXU2 - MMXU7
Enabled MMXU2 - MMXU7
146 Protection Interface 2 (Port E) Disabled (Prot.
Interf. 1 disabled) -
Disabled (Prot.
Interf. 1 enabled) MMXU2 - MMXU7
Enabled MMXU2 - MMXU7
Table 2-3 SIPROTEC 7SD5 - Effects of Function parameters to the Logical Nodes (Cont.)
No. Funktion Setting Logical Nodes
Basics
2.2 Effects of Configuration to the Logical Nodes
47SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
147 Number of relays 2 relays, no
Protection Interface -
2 relays, min. 1
Protection Interface MMXU2, MMXU3
3 relays MMXU2, MMXU3, MMXU4
4 relays MMXU2, MMXU3,
MMXU4, MMXU5
5 relays MMXU2, MMXU3,
MMXU4, MMXU5, MMXU6
6 relays MMXU2, MMXU3, MMXU4
MMXU5, MMXU6, MMXU7
148 GPS synchronization No effect
149 Charging cu rrent compensation No effect
160 Line sections for fault locator No effect
Table 2-3 SIPROTEC 7SD5 - Effects of Function parameters to the Logical Nodes (Cont.)
No. Funktion Setting Logical Node s
Basics
2.2 Effects of Configuration to the Logical Nodes
48 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
2.2.5 Function parameters SIPROTEC 7SD610
The following table sh ows which Logical Nodes are available whe n setting the corresponding
function parameter.
The setting (-) implies that no corres ponding LN is available.
Table 2-4 SIPROTEC 7SD610 - Effects of Function parameters to the Logical Node s
No. Funktion Setting Logical Nodes
103 Setting Group Change Option No effect
Disturbance Recorder - RDRE1
110 T rip mode 3pole only XCBR1
1-/3pole XCBR2, XCBR3, XCBR4
112 Differential protection Disa bled -
Enabled PDIF1, PDIF2, PTRC3
122 DTT Direct Transfer Trip No effect
124 Instantaneous HighSpeed SOTF
Overcurrent No effect
126 Backup overcurrent Disabled -
TOC IEC PTOC1 – PTOC4,
PTOC9, PTOC10
TOC ANSI PTOC1 – PTOC4,
PTOC9, PTOC10
Basics
2.2 Effects of Configuration to the Logical Nodes
49SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
133 Auto-Reclose Func tion Disabled -
1 AR-cycle RREC1
2 AR-cycles RREC1
3 AR-cycles RREC1
4 AR-cycles RREC1
5 AR-cycles RREC1
6 AR-cycles RREC1
7 AR-cycles RREC1
8 AR-cycles RREC1
ADT RREC1
134 Auto-Reclose control mode No effect
136 Over / Underfrequency Protection Disabled -
Enabled PTOF1 – PTOF4,
PTUF1 – PTUF4
137 Under / Overvoltage Protection Disabled -
Enabled PTUV1 – PTUV6,
PTOV1 – PTOV10
Enabl. w. comp. PTUV1 –PTUV6,
PTOV1 – PTOV10
139 Breaker Failure Protection D isabled -
Enabled RBRF1
enabled w/ 3I0> RBRF1
Table 2-4 SIPROTEC 7SD610 - Effe cts of Function parameters to the Logical Nodes (Cont.)
No. Funktion Setting Logical Node s
Basics
2.2 Effects of Configuration to the Logical Nodes
50 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
140 Trip Circuit Supervision Disabled -
1 Trip Circuit XCBR1.CirSpv -
XCBR4.CirSpv
2 Trip Circuits XCBR1.CirSpv -
XCBR4.CirSpv
3 Trip Circuits XCBR1.CirSpv -
XCBR4.CirSpv
141 Restricted earth fault protection Disabled -
Enabled PDIF3
142 Thermal overload protection Disabled -
Enabled PTTR1
143 Transformer inside protection zone No effect
144 Voltage transformers No effect
148 GPS synchronization No effect
- Protection Interface (Port D) MMXU2, MMXU3
Table 2-4 SIPROTEC 7SD610 - Effects of Function parameters to the Logical Nodes (Cont.)
No. Funktion Setting Logical Nodes
Basics
2.2 Effects of Configuration to the Logical Nodes
51SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
2.2.6 Function parameters SIPROTEC 7VK61
The following table shows which Logical Nodes are available when setting the correspondin g
function parameter.
The setting (-) implies that no corresponding LN is available.
Table 2-5 SIPROTEC 7VK61 - Effects of Func tion parameters to the Logical Nodes
No. Funktion Setting Logical Node s
103 Setting Group Change Option No effect
Disturbance Recorder - RDRE1
106 Voltage transformer connection 3phase -
1phase -
No LN RSYN1,
PTUV1 - PTUV6,
PTOV1 - PTOV10
not available
107 Current transformer connection Yes
No LN PTOC1 - PTOC4
not available
110 Trip mode 3pole only XCBR1
1-/3pole XCBR2, XCBR3, XCBR4
126 Backup overcurrent Disabled -
TOC IEC PTOC1 – PTOC3
TOC IEC /w 3ST PTOC1 - PTOC4
TOC ANSI PTOC1 - PTOC4
Basics
2.2 Effects of Configuration to the Logical Nodes
52 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
133 Auto-Reclose Function Disabled -
1 AR-cycle RREC1
2 AR-cycles RREC1
3 AR-cycles RREC1
4 AR-cycles RREC1
5 AR-cycles RREC1
6 AR-cycles RREC1
7 AR-cycles RREC1
8 AR-cycles RREC1
ADT RREC1
134 Auto-Reclose control mode No effect
135 Synchronism and Vo ltage Check Disabled -
Enabled RSYN1
137 Under / Overvoltage Protection Disabled -
Enabled PTUV1 – PTUV6,
PTOV1 – PTOV10
139 Breaker Failure Protection Disabled -
Enabled RBRF1
enabled w/ 3I0> RBRF1
140 Trip Circuit Supervision Disabled -
1 Trip Circuit XCBR1.CirSpv -
XCBR4.CirSpv
2 Trip Circuits XCBR1.CirSpv -
XCBR4.CirSpv
3 Trip Circuits XCBR1.CirSpv -
XCBR4.CirSpv
Table 2-5 SIPROTEC 7VK61 - Effects of Function parameters to the Lo gical Nodes (Cont.)
No. Funktion Setting Logical Nodes
Basics
2.2 Effects of Configuration to the Logical Nodes
53SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
Basics
2.3 Allocation of Logical Nodes to Logical Devices
54 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
2.3 Allocation of Logical Nodes to Logical Devices
All Logical Nodes (LN) are allocated to Logical Devices (LD). The following tables show this
allocation and the DOIs available for each LN.
LD PROT The Logical Device PROT (protection) contains the following LNs:
Table 2-6 LD PROT - Logical Nodes
LN Function DOI
LLN0 General Mod, Beh, Health, NamPlt
PTRC1 General device pickup
Total OFF Mod, Beh, Health, NamPlt, Str,Tr,FinTr
PDIF1
PDIF2 Differential protection Mod, Beh, Health, NamPlt, Str, Op
PTRC3 Differential protection
General messages Mod, Beh, Health, NamPlt, Str, Op
StrA, StrAG, StrB, StrBG, StrC, StrCG, StrAB, StrBC,
StrCA, StrABC, StrABG, StrBCG, StrCAG, StrABCG
PDIF3 Earth fault overcurrent Mod, Beh, Health, NamPlt, Str, Op, DifAClc, RstA
PDIS1
PDIS10 Distance protection
zone 1, zone 1B Mod, Beh, Health, NamPlt, Str, Op
StrAG, StrBG, StrCG, StrAB, StrBC, StrCA
PDIS2
PDIS3
PDIS4
PDIS5
Distance protection
zone 2, zone3, zone 4, zone 5 Mod, Beh, Health, NamPlt, Str, Op
PTRC2 Distance protection
General messages Mod, Beh, Health, NamPlt, Str, Op
PSCH1 Distance protection
Teleprotection Mod, Beh, Health, NamPlt, Str, Op, CarRx, ProRx,
LosOfGrd, Echo, WeiOp, RvABlk, GrdRx, ProTx
RPSB1
RPSB2
RPSB3
RPSB4
RPSB5
RPSB1
Power Swing detection
zone1, zone 2, zone3, zone 4,
zone 5, zone 1B
Mod, Beh, Health, NamPlt, Str, BlkZn
RPSB6 Power Swing detection
Power Swing trip Mod, Beh, Health, NamPlt, Op
Basics
2.3 Allocation of Logical Nodes to Logical Devices
55SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTOC5
PTOC6
PTOC7
PTOC8
Earth fault overcurrent Mod, Beh, Health, NamPlt, Str, Op
PTOC1
PTOC2
PTOC3
PTOC4
Backup overcurrent Mod, Beh, Health, NamPlt, Str, Op
PTOC9
PTOC10 Backup overcurren t
directional Mod, Beh, Health, NamPlt, Str, Op
RSYN1 Synchronism and Voltage Check Mod, Beh, Health , NamPlt, Rel, VInd, AngInd, HzIn d,
SynPrg, DifVClc, DifHzClc, DifAngClc
PTUV1
PTUV2
PTUV3
PTUV4
PTUV5
PTUV6
Undervoltage Protection Mod, Beh, Health, NamPlt, Str, Op
PTOV1
PTOV2
PTOV3
PTOV4
PTOV5
PTOV6
PTOV7
PTOV8
PTOV9
PTOV10
Overvoltage Protection Mod, Beh, Health, NamPlt, Str, Op
PTUF1
PTUF2
PTUF3
PTUF4
Underfrequency Protection Mod, Beh, Health, NamPlt, Str, Op
PTOF1
PTOF2
PTOF3
PTOF4
Overfrequency Protection Mod, Beh, Health, NamPlt, Str, Op
RFLO1 Fault Locator Mod, Beh, Health, NamPlt,
FltZ, FltDiskm
RBRF1 Breaker Failure Protection Mod, Beh, Health, NamPlt, Str, OpEx, OpIn
PTTR1 Thermal overload protection Mod, Beh, Health, NamPlt, Str, Op, AlmThm
Table 2-6 LD PROT - Logical Nodes (Cont.)
LN Function DOI
Basics
2.3 Allocation of Logical Nodes to Logical Devices
56 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
LD MEAS The Logical Device MEAS (measurement) contains the following LNs:
XCBR1 Three-pole tripping Mod, Be h, Health, NamPlt, Loc, OpCnt, Pos
BlkOpn, BlkCls, CBOpCap
SumSwARs1, SumSwARs2, SumSwARs3
XCBR2
XCBR3
XCBR4
Single-pole / Three-pole tripping Mod, Beh, Health, NamPlt, Loc, OpC nt, Pos
BlkOpn, BlkCls, CBOpCap,
SumSwARs
LPHD1 Device PhyNam, PhyHealth,
Proxy
only SIPROTEC 7VK61
RREC1 Auto-Reclose Function Mod, Beh, Health, NamPlt, Op, AutoRecSt
Table 2-6 LD PROT - Logical Nodes (Cont.)
LN Function DOI
Table 2-7 LD MEAS - Logical Nodes
LN Function DOIs
LLN0 General Mod, Beh, Health, NamPlt
MMXU1 Operational measured values Mod, Beh, Health, NamPlt,
TotW, TotVAr, TotVA, TotPF, Hz, PPV, PhV, A
MMXU2 Measure relay 1 Mod, Beh, Health, NamPlt, Relld, A, PhV,
MMXU3 Measure relay 2 Mod, Beh, Health, NamPlt, Relld, A, PhV,
MMXU4 Measure relay 3 Mod, Beh, Health, NamPlt, Relld, A, PhV,
MMXU5 Measure relay 4 Mod, Beh, Health, NamPlt, Relld, A, PhV,
MMXU6 Measure relay 5 Mod, Beh, Health, NamPlt, Relld, A, PhV,
MMXU7 Measure relay 6 Mod, Beh, Health, NamPlt, Relld, A, PhV,
MMTR1 Energy Mod, Beh, Health, NamPlt, SupWh, SupVArh,
DmdWh, DmdVArh
MSQI1 Measured values,
symmetrical components Mod, Beh, Health, NamPlt, SeqA, SeqV
LPHD1 Device PhyNam, PhyHealth Proxy, CtrlNum, DevStr
Basics
2.3 Allocation of Logical Nodes to Logical Devices
57SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
LD DR The Logical Device DR (Disturbance Recorder) contains the following LNs:
LD CTRL The Logical Device CTRL (Control) contains the following LNs:
* SIPROTEC 7VK61: RREC1 Part of Logical Device Protection (see Table 2-6 )
The Logical Nodes of the switching (and userdefined) objects will be created by DIGSI during
the parameteri za ti on of your SIPR O TEC devi ce .
MICS, Model Implementation Conformance Statement, shows the assignment of the DOIs;
you can use DIGSI to print the MICS.
LD EXT The Logical Device EXT (Extended) contains the following LNs:
Table 2-8 LD DR - Logical Nodes
LN Function DOIs
LLN0 General Mod, Beh, Health, NamPlt
RDRE1 Fault Record Mod, Beh, Health, NamPlt, RcdMade,
FltNum, GriFltNum, RcdStr
LPHD1 Device PhyNam, PhyHealth, Proxy
Table 2-9 LD CTRL - Logical Nodes
LN Function DOIs
LLN0 General Mod, Beh, Health, NamPlt, LEDRs, Loc
RREC1* Auto-Reclose Function Mod, Beh, Health, NamPlt, Op, AutoRecSt
CALH1 Alarms, warning messa ge s an d
group alarms Mod, Beh, Health, NamPlt, GrAlm, GrWrn,
ErrBoard1, ErrBoard2, ErrBoard3, ErrBoard4,
ErrBoard5, ErrBoard6, ErrBoard7
LPHD1 Device PhyNam, PhyHealth, Proxy
Table 2-10 LD EXT - Logical Nodes
LN Function DOIs
LLN0 General Mod, Beh, Health, NamPlt
LPHD1 Device PhyNam, PhyHealth, Proxy
Basics
2.4 Logical Node LLN0
58 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
2.4 Logical Node LLN0
2.4.1 Logical Device PROT
LLN0.Mod
LLN0.Beh
No. Information
52 At Least 1 Protection Funct. is Active (ProtActive) 001111
Test mode (Test mode) 0 x 0101
Stop data transmission (DataStop) 0x1001
LLN0.Mod.stVal 552314
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
52 At Least 1 Protection Funct. is Active (ProtActive) 01111
Test mode (Test mode) x 0011
Stop data transmission (DataStop) x0101
LLN0.Beh.stVal 51234
device annunciation / setting: 1 - ON / TRUE IEC Status Beh.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
Basics
2.4 Logical Node LLN0
59SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
2.4.2 Logical Devices MEAS, CTRL, DR and EXT
LLN0.Mod
LLN0.Beh
No. Information
51 Device is Operational and Protecting (Device OK) 001111
Test mode (Test mode) 0 x 0101
Stop data transmission (DataStop) 0x1001
LLN0.Mod.stVal 552314
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 01111
Test mode (Test mode) x 0011
Stop data transmission (DataStop) x0101
LLN0.Beh.stVal 51234
device annunciation / setting: 1 - ON / TRUE IEC Status Beh.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
Basics
2.5 The DOI Behavior
60 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
2.5 The DOI Behavior
2.5.1 Logical Device PROT
For the Logical Nodes of the PROT Logical Device, LNx.Beh.stVal is formed from
LNx.Mod.stVal of the Logical Node and the status of the following device messages:
Test mode (Test mode),
Stop data transmission and
At Least 1 Protection Funct. is Active.
No. Information
52 At Least 1 Protection Funct. is Active (ProtActive) x1111110
Test mode (Test mode) x010101x
Stop data transmission (DataStop) x0011xxx
LNx .Mod.stVal 5111122x
LNx.Beh.stVal 51324245
device annunciation / setting: 1 - ON / TRUE IEC Status stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
Basics
2.5 The DOI Behavior
61SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
2.5.2 Logical Devices MEAS, CTRL, DR and EXT
For the Logical Nodes of the MEAS, CTRL, DR and EXT Logical Devices, LNx.Beh.stVal is
formed from LNx.Mod.stVal of the Log ical Node and the status of the following device
messages:
Test mode (Test mode),
Stop data transmission.
No. Information
Test mode (Test mode) x010101
Stop data transmission (DataStop) x0011xx
LNx .Mod.stVal 5111122
LNx.Beh.stVal 5132424
device annunciation / setting: 1 - ON / TRUE IEC Status stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
Basics
2.5 The DOI Behavior
62 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
63SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
Mapping 3
Contents This chapter shows the mapping of the information relevant to the device on the Logical Node of
protocol IEC61850. It is structured according to function. In Chapter 2 you can find the available
functions of the different devices and what consequences non-configured functions have on the
Logical Nodes. You find also general information about IEC 61850 mapping of information.
3.1 Differential Protection (PDIFx, PTRCx) 64
3.2 Distance Protection (PDISx, PTRC2) 74
3.3 Power swing detection (RPSBx) 103
3.4 Teleprotection for distance pr otection (PSCH1) 116
3.5 Earth fault overcurrent protection in earthed systems (PTOCx) 123
3.6 Earth fault detection in non-earthed systems (PSDE1) 131
3.7 Restricted earth fault protection (PDIF3) 135
3.8 Overcurrent protection (PTOCx) 137
3.9 Automatic reclosure function (RREC1 ) 147
3.10 Synchronism and voltage check (RSYN1) 149
3.11 Under and overvoltage protection (PTUVx, PTOVx) 152
3.12 Frequency protection (PTUFx, PTOFx) 176
3.13 Fault locator (RFLO1) 192
3.14 Circuit breaker failure protection (RBRF1) 194
3.15 Thermal overload protection (PTTR1) 196
3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx) 198
3.17 Tripping Logic of the Entire Device (PTRC1) 208
3.18 Device (LPHD1, CALH1) 212
3.19 Measurements (MMXUx, MSQI1, MMTR1) 216
3.20 Oscillographic Fault Records (RDRE1) 242
Mapping
3.1 Differential Protection (PDIFx, PTRCx)
64 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.1 Differential Protection (PDIFx, PTRCx)
3.1.1 I-DIFF> (PDIF1)
PDIF1.Mod
PDIF1.Health
PDIF1.Str
No. Information
3120 Diff: Active (Diff active) x 001111
3148 Diff: Differential protection is blocked (Diff block) x 100000
3149 Diff: Diff. protection is switched off (Diff OFF) 1000000
3190 Diff: Set Teststate of Diff. protection (T est Diff.) x x x 0101
3191 Diff: Set Commissioning state of Diff. (Comm. Diff) x x x 0011
PDIF1.Mod.stVal 5251344
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PDIF1.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
3139 Diff: Fault detection of I-Diff> (I-Diff> Flt.) 01
PDIF1.Str.general 0 1
device annunciati on : 1 - ON IEC Status Str.gene ra l : 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.1 Differential Protection (PDIFx, PTRCx)
65SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PDIF1.Op
3.1.2 I-DIFF>> (PDIF2)
PDIF2.Mod
PDIF2.Health
No. Information
OFF-command IDiff> 0 1
PDIF1.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3120 Diff: Active (Diff active) x 001111
3148 Diff: Differential protection is blocked (Diff block) x 100000
3149 Diff: Diff. protection is switched off (Diff OFF) 1000000
3190 Diff: Set Teststate of Diff. protection (Test Diff.) x x x 0101
3191 Diff: Set Commissioning state of Diff. (Comm. Diff) x x x 0011
PDIF2.Mod.stVal 5251344
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PDIF2.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
Mapping
3.1 Differential Protection (PDIFx, PTRCx)
66 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PDIF2.Str
PDIF2.Op
No. Information
3137 Diff: Fault detection of I-Diff>> (I-Diff>> Flt.) 0 1
PDIF2.Str.general 0 1
device annunciati on : 1 - ON IEC Status Str.gene ra l : 0 - FALSE
0 - OFF 1 - TRUE
No. Information
OFF-command I-Diff>> 0 1
PDIF2.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.1 Differential Protection (PDIFx, PTRCx)
67SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.1.3 Differencial Protection General Information
PTRC3.Mod
PTRC3.Health
PTRC3.Str
No. Information
3120 Diff: Active (Diff active) x 001111
3148 Diff: Differential protection is blocked (Diff block) x 100000
3149 Diff: Diff. protection is switched off (Diff OFF) 1000000
3190 Diff: Set Teststate of Diff. protection (Test Diff.) x 000101
3191 Diff: Set Commissioning state of Diff. (Comm. Diff) x 000011
PTRC3.Mod.stVal 5251344
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTRC3.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
3132 Diff: Fault detection (Diff. Gen. Flt.) 0 1
PTRC3.Str.general 0 1
device annunciation: 1 - ON IEC Status Str.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.1 Differential Protection (PDIFx, PTRCx)
68 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTRC3.Str.dirGeneral
PTRC3.Str.phsA
PTRC3.Str.dirPhsA
PTRC3.Str.phsB
PTRC3.Str.dirPhsB
No. Information
PTRC3.Str.dirGeneral 1
device annunciati on : 1 - ON IEC Status Str.dirGener al : 0 - UNKNOWN
0 - OFF 1 - FORWARD
x - irrelevant 2 - BACKWARD
3 - BOTH
No. Information
3133 Diff: Fault detection in phase L1 (Diff. Flt. L1) 0 1
PTRC3.Str.phsA 0 1
device annunciation : 1 - ON IEC Status Str.phsA: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
PTRC3.Str.dirPhsA 1
device annunciati on : 1 - ON IEC Status Str .d i rP hsA: 0 - UNKNOWN
0 - OFF 1 - FORWARD
x - irrelevant 2 - BACKWARD
3 - BOTH
No. Information
3134 Diff: Fault detection in phase L2 (Diff. Flt. L2 0 1
PTRC3.Str.phsB 0 1
device annunciation : 1 - ON IEC Status Str.phsB: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
PTRC3.Str.dirPhsB 1
device annunciati on : 1 - ON IEC Status Str .d i rP hsB: 0 - UNKNOWN
0 - OFF 1 - FORWARD
x - irrelevant 2 - BACKWARD
3 - BOTH
Mapping
3.1 Differential Protection (PDIFx, PTRCx)
69SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTRC3.Str.phsC
PTRC3.Str.dirPhsC
PTRC3.Str.neut
PTRC3.Str.dirNeut
PTRC3.Op
No. Information
3135 Diff: Fault detection in phase L3 (Diff. Flt. L3) 0 1
PTRC3.Str.phsC 0 1
device annunciation: 1 - ON IEC Status Str.phsC: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
PTRC3.Str.dirPhsC 1
device annunciation: 1 - ON IE C Status St r.dirPhsC: 0 - UNKNOWN
0 - OFF 1 - FORWARD
x - irrelevant 2 - BACKWARD
3 - BOTH
No. Information
3136 Diff: Earth fault detection (Diff. Flt. E) 0 1
PTRC3.Str.neut 0 1
device annunciation: 1 - ON IEC Status Str.neut: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
PTRC3.Str.dirNeut 1
device annunciation: 1 - ON IEC Status Str.dirNeut: 0 - UNKNOWN
0 - OFF 1 - FORWARD
x - irrelevant 2 - BACKWARD
3 - BOTH
No. Information
3141 Diff: General TRIP (Diff. Gen. TRIP) 0 1
PTRC3.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.1 Differential Protection (PDIFx, PTRCx)
70 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTRC3.Op.phsA
PTRC3.Op.phsB
PTRC3.Op.phsC
PTRC3.StrA
No. Information
3142 Diff: TRIP - Only L1 (Diff TRIP 1p L1) 1 0 0
3145 Diff: TRIP L123 (Diff TRIP L123) 0 1 0
PTRC3.Op.phsA 1 1 0
device annunciation : 1 - ON IEC Status Op.phsA: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3143 Diff: TRIP - Only L2 (Diff TRIP 1p L2) 1 0 0
3145 Diff: TRIP L123 (Diff TRIP L123) 0 1 0
PTRC3.Op.phsB 1 1 0
device annunciation : 1 - ON IEC Status Op.phsB: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3144 Diff: TRIP - Only L3 (Diff TRIP 1p L3) 1 0 0
3145 Diff: TRIP L123 (Diff TRIP L123) 0 1 0
PTRC3.Op.phsC 1 1 0
device annunciation : 1 - ON IEC Status Op.phsC: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3176 Diff: Fault detection L1 (only) (Diff Flt. 1p.L1) 1 0
PTRC3.StrA.stVal 1 0
device annunciation : 1 - ON IEC Status StrA.stVal: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.1 Differential Protection (PDIFx, PTRCx)
71SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTRC3.StrAG
PTRC3.StrB
PTRC3.StrBG
PTRC3.StrC
PTRC3.StrCG
No. Information
3177 Diff: Fault detection L1E (Diff Flt. L1E) 1 0
PTRC3.StrAG.stVal 1 0
device annunciation: 1 - ON IEC Status StrAG.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3178 Diff: Fault detection L2 (only) (Diff Flt. 1p.L2) 1 0
PTRC3.StrB.stVal 1 0
device annunciation: 1 - ON IEC Status StrB.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3179 Diff: Fault detection L2E (Diff Flt. L2E) 1 0
PTRC3.StrBG.stVal 1 0
device annunciation: 1 - ON IEC Status StrBG.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3182 Diff: Fault detection L3 (only) (Diff Flt. 1p.L3) 1 0
PTRC3.StrC.stVal 1 0
device annunciation: 1 - ON IEC Status StrC.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3183 Diff: Fault detection L3E (Diff Flt. L3E) 1 0
PTRC3.StrCG.stVal 1 0
device annunciation: 1 - ON IEC Status StrCG.stVal: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.1 Differential Protection (PDIFx, PTRCx)
72 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTRC3.StrAB
PTRC3.StrBC
PTRC3.StrCA
PTRC3.StrABC
No. Information
3180 Diff: Fault detection L12 (Diff Flt. L12) 1 0
PTRC3.StrAB.stVal 1 0
device annunciation : 1 - ON IEC Status StrAB.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3186 Diff: Fault detection L23 (Diff Flt. L23) 1 0
PTRC3.StrBC.stVal 1 0
device annunciation : 1 - ON IEC Status StrBC.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3184 Diff: Fault detection L31 (Diff Flt. L31) 1 0
PTRC3.StrCA.stVal 1 0
device annunciation : 1 - ON IEC Status StrCA.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3188 Diff: Fault detection L123 (Diff Flt. L123) 1 0
PTRC3.StrABC.stVal 1 0
device annunciation: 1 - ON IEC Status StrABC.stVal: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.1 Differential Protection (PDIFx, PTRCx)
73SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTRC3.StrABG
PTRC3.StrBCG
PTRC3.StrCAG
PTRC3.StrABCG
No. Information
3181 Diff: Fault detection L12E (Diff Flt. L12E 1 0
PTRC3.StrABG.stVal 1 0
device annunciation: 1 - ON IEC Status StrABG.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3187 Diff: Fault detection L23E (Diff Flt. L23E) 1 0
PTRC3.StrBCG.stVal 1 0
device annunciation: 1 - ON IEC Status StrBCG.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3185 Diff: Fault detection L31E (Diff Flt. L31E) 1 0
PTRC3.StrCAG.stVal 1 0
device annunciation: 1 - ON IEC Status StrCAG.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3189 Diff: Fault detection L123E (Diff Flt. L123E) 1 0
PTRC3.StrABCG.stVal 1 0
device annunciation: 1 - ON IEC Status StrABCG.stVal: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.2 Distance Protection (PDISx, PTRC2)
74 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.2 Distance Protection (PDISx, PTRC2)
3.2.1 Distance protection zone 1 (PDIS1)
PDIS1.Mod
PDIS1.Health
No. Information
3653 Distance is ACTIVE (Dist. ACTIVE) 0 x x 1111
3652 Distance is BLOCKED (Dist. BLOCK) x x x 0011
3603 >BLOCK 21 Distance (>BLOCK 21 Dist.) x x x 0101
3651 Distance is switched off (Dist. OFF) x 1 x 0000
Op. mode Z1 (P1301) = Inactive x x 10000
PDIS1.Mod.stVal 5551222
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 1100
3654 Setting error K0(Z1) or Angle K0(Z1) (Dis.ErrorK0(Z1)) 1010
PDIS1.Health.stVal 2133
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
Mapping
3.2 Distance Protection (PDISx, PTRC2)
75SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PDIS1.Str
No. Information
3741 Distance Pickup Z1, Loop L1E (Dis. Z1 L1E) 0 1 xxxxx
3742 Distance Pickup Z1, Loop L2E (Dis. Z1 L2E) 0 x 1 xxxx
3743 Distance Pickup Z1, Loop L3E (Dis. Z1 L3E) 0 x x 1 x x x
3744 Distance Pickup Z1, Loop L12 (Dis. Z1 L12) 0 x x x 1 x x
3745 Distance Pickup Z1, Loop L23 (Dis. Z1 L23) 0 xxxx1x
3746 Distance Pickup Z1, Loop L31 (Dis. Z1 L31) 0 xxxxx1
PDIS1.Str.general 0111111
device annunciation: 1 - ON IEC Status Str.general: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
Mapping
3.2 Distance Protection (PDISx, PTRC2)
76 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PDIS1.Str.dirGeneral
No. Information
3719 Distance Pickup FORWARD (Dis. forward) 00000000000000
3720 Distance Pickup REVERSE (Dis. reverse) 00000001111111
3741 Distance Pickup Z1, Loop L1E (Dis. Z1 L1E) 0 1 xxxxx01xxxxx
3742 Distance Pickup Z1, Loop L2E (Dis. Z1 L2E) 0 x 1 xxxx0x1xxxx
3743 Distance Pickup Z1, Loop L3E (Dis. Z1 L3E) 0 x x 1 x x x 0 x x 1 x x x
3744 Distance Pickup Z1, Loop L12 (Dis. Z1 L12) 0 x x x 1 x x 0 x x x 1 x x
3745 Distance Pickup Z1, Loop L23 (Dis. Z1 L23) 0 xxxx1x0xxxx1x
3746 Distance Pickup Z1, Loop L31 (Dis. Z1 L31) 0 xxxxx10xxxxx1
PDIS1.Str.dirGeneral 00000000222222
No. Information
3719 Distance Pickup FORWARD (Dis. forward) 11111111111111
3720 Distance Pickup REVERSE (Dis. reverse) 00000001111111
3741 Distance Pickup Z1, Loop L1E (Dis. Z1 L1E) 0 1 xxxxx01xxxxx
3742 Distance Pickup Z1, Loop L2E (Dis. Z1 L2E) 0 x 1 xxxx0x1xxxx
3743 Distance Pickup Z1, Loop L3E (Dis. Z1 L3E) 0 x x 1 x x x 0 x x 1 x x x
3744 Distance Pickup Z1, Loop L12 (Dis. Z1 L12) 0 x x x 1 x x 0 x x x 1 x x
3745 Distance Pickup Z1, Loop L23 (Dis. Z1 L23) 0 xxxx1x0xxxx1x
3746 Distance Pickup Z1, Loop L31 (Dis. Z1 L31) 0 xxxxx10xxxxx1
PDIS1.Str.dirGeneral 01111110333333
device annunciati on : 1 - ON IEC Status Str.dirGener al : 0 - UNKNOWN
0 - OFF 1 - FORWARD
x - irrelevant 2 - BACKWARD
3 - BOTH
Mapping
3.2 Distance Protection (PDISx, PTRC2)
77SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PDIS1.Op
PDIS1.Op.phsA
PDIS1.Op.phsB
No. Information
3811 Distance TRIP single-phase Z1 (Dis.TripZ1/1p) 0 1 x x
3823 DisTRIP 3phase in Z1 with single-ph Flt. (DisTRIP3p. Z1sf) 0 x 1 x
3824 DisTRIP 3phase in Z1 with multi-ph Flt. (DisTRIP3p. Z1mf) 0 x x 1
PDIS1.Op.general 0111
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
3811 Distance TRIP single-phase Z1 (Dis.TripZ1/1p) x0100
3823 DisTRIP 3phase in Z1 with single-ph Flt. (DisTRIP3p. Z1sf) x 0010
3824 DisTRIP 3phase in Z1 with multi-ph Flt. (DisTRIP3p. Z1mf) x 0001
3802 Distance TRIP command - Only Phase L1 (Dis.Trip 1pL1) 0 x 1 0 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 0 x 0 1 1
PDIS1.Op.phsA 00111
device annunciation: 1 - ON IEC Status Op.phsA: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
3811 Distance TRIP single-phase Z1 (Dis.TripZ1/1p) x0100
3823 DisTRIP 3phase in Z1 with single-ph Flt. (DisTRIP3p. Z1sf) x 0010
3824 DisTRIP 3phase in Z1 with multi-ph Flt. (DisTRIP3p. Z1mf) x 0001
3803 Distance TRIP command - Only Phase L2 (Dis.Trip 1pL2) 0 x 1 0 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 0 x 0 1 1
PDIS1.Op.phsB 00111
device annunciation: 1 - ON IEC Status Op.phsB: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
Mapping
3.2 Distance Protection (PDISx, PTRC2)
78 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PDIS1.Op.phsC
PDIS1.StrAG
PDIS1.StrBG
PDIS1.StrCG
No. Information
3811 Distance TRIP single-phase Z1 (Dis.TripZ1/1p) x 0100
3823 DisTRIP 3phase in Z1 with single-ph Flt. (DisTRIP3p. Z1sf) x 0010
3824 DisTRIP 3phase in Z1 with multi-ph Flt. (DisTRIP3p. Z1mf) x 0001
3804 Distance TRIP command - Only Phase L3 (Dis.Trip 1pL3) 0 x 1 0 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 0 x 0 1 1
PDIS1.Op.phsC 00111
device annunciation : 1 - ON IEC Status Op.phsC: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
3741 Distance Pickup Z1, Loop L1E (Dis. Z1 L1E) 0 1
PDIS1.StrAG.stVal 0 1
device annunciation: 1 - ON IEC Status StrAG.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3742 Distance Pickup Z1, Loop L2E (Dis. Z1 L2E) 0 1
PDIS1.StrBG.stVal 0 1
device annunciation: 1 - ON IEC Status StrBG.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3743 Distance Pickup Z1, Loop L3E (Dis. Z1 L3E) 0 1
PDIS1.StrCG.stVal 0 1
device annunciation : 1 - ON IEC Status StrCG.stVal: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.2 Distance Protection (PDISx, PTRC2)
79SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PDIS1.StrAB
PDIS1.StrBC
PDIS1.StrCA
No. Information
3744 Distance Pickup Z1, Loop L12 (Dis. Z1 L12) 0 1
PDIS1.StrAB.stVal 0 1
device annunciation: 1 - ON IEC Status StrAB.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3745 Distance Pickup Z1, Loop L23 (Dis. Z1 L23) 0 1
PDIS1.StrBC.stVal 0 1
device annunciation: 1 - ON IEC Status StrBC.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3746 Distance Pickup Z1, Loop L31 (Dis. Z1 L31) 0 1
PDIS1.StrCA.stVal 0 1
device annunciation: 1 - ON IEC Status StrCA.stVal: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.2 Distance Protection (PDISx, PTRC2)
80 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.2.2 Distance protection zone 1B (PDIS10)
PDIS10.Mod
PDIS10.Health
No. Information
3653 Distance is ACTIVE (Dist. ACTIVE) 0 x x 1111
3652 Distance is BLOCKED (Dist. BLOCK) x x x 0011
3603 >BLOCK 21 Distance (>BLOCK 21 Dist.) x x x 0101
3651 Distance is switched off (Dist. OFF) x 1 x 0000
Op. mode Z1B (P1351) = Inactive x x 10000
PDIS10.Mod.stVal 5551222
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 1100
3655 Setting error K0(>Z1) or Angle K0(>Z1) (DisErrorK0(>Z1)) 1010
PDIS10.Health.stVal 2133
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
Mapping
3.2 Distance Protection (PDISx, PTRC2)
81SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PDIS10.Str
No. Information
3747 Distance Pickup Z1B, Loop L1E (Dis. Z1B L1E) 0 1 x x x x x
3748 Distance Pickup Z1B, Loop L2E (Dis. Z1B L2E) 0 x 1 x x x x
3749 Distance Pickup Z1B, Loop L3E (Dis. Z1B L3E) 0 x x 1 x x x
3750 Distance Pickup Z1B, Loop L12 (Dis. Z1B L12) 0 x x x 1 x x
3751 Distance Pickup Z1B, Loop L23 (Dis. Z1B L23) 0 x x x x 1 x
3752 Distance Pickup Z1B, Loop L31 (Dis. Z1B L31) 0 x x x x x 1
PDIS10.Str.general 01111 1 1
device annunciation: 1 - ON IEC Status Str.general: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
Mapping
3.2 Distance Protection (PDISx, PTRC2)
82 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PDIS10.Str.dirGeneral
No. Information
3719 Distance Pickup FORWARD (Dis. forward) 00000000000000
3720 Distance Pickup REVERSE (Dis. reverse) 00000001111111
3747 Distance Pickup Z1B, Loop L1E (Dis. Z1B L1E) 0 1 xxxxx01xxxxx
3748 Distance Pickup Z1B, Loop L2E (Dis. Z1B L2E) 0 x 1 xxxx0x1xxxx
3749 Distance Pickup Z1B, Loop L3E (Dis. Z1B L3E) 0 x x 1 x x x 0 x x 1 x x x
3750 Distance Pickup Z1B, Loop L12 (Dis. Z1B L12) 0 x x x 1 x x 0 x x x 1 x x
3751 Distance Pickup Z1B, Loop L23 (Dis. Z1B L23) 0 xxxx1x0xxxx1x
3752 Distance Pickup Z1B, Loop L31 (Dis. Z1B L31) 0 xxxxx10xxxxx1
PDIS10.Str.dirGeneral 00000000222222
No. Information
3719 Distance Pickup FORWARD (Dis. forward) 11111111111111
3720 Distance Pickup REVERSE (Dis. reverse) 00000001111111
3747 Distance Pickup Z1B, Loop L1E (Dis. Z1B L1E) 0 1 xxxxx01xxxxx
3748 Distance Pickup Z1B, Loop L2E (Dis. Z1B L2E) 0 x 1 xxxx0x1xxxx
3749 Distance Pickup Z1B, Loop L3E (Dis. Z1B L3E) 0 x x 1 x x x 0 x x 1 x x x
3750 Distance Pickup Z1B, Loop L12 (Dis. Z1B L12) 0 x x x 1 x x 0 x x x 1 x x
3751 Distance Pickup Z1B, Loop L23 (Dis. Z1B L23) 0 xxxx1x0xxxx1x
3752 Distance Pickup Z1B, Loop L31 (Dis. Z1B L31) 0 xxxxx10xxxxx1
PDIS10.Str.dirGeneral 01111110333333
device annunciati on : 1 - ON IEC Status Str.dirGener al : 0 - UNKNOWN
0 - OFF 1 - FORWARD
x - irrelevant 2 - BACKWARD
3 - BOTH
Mapping
3.2 Distance Protection (PDISx, PTRC2)
83SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PDIS10.Op
PDIS10.Op.phsA
PDIS10.Op.phsB
No. Information
3813 Distance TRIP single-phase Z1B (Dis.TripZ1B1p) 0 1 x x
3825 DisTRIP 3phase in Z1B with single-ph Flt (DisTRIP3p.Z1Bsf) 0 x 1 x
3826 DisTRIP 3phase in Z1B with multi-ph Flt. (DisTRIP3p Z1Bmf) 0 x x 1
PDIS10.Op.general 0111
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
3813 Distance TRIP single-phase Z1B (Dis.TripZ1B1p) x0100
3825 DisTRIP 3phase in Z1B with single-ph Flt (DisTRIP3p.Z1Bsf) x 0010
3826 DisTRIP 3phase in Z1B with multi-ph Flt. (DisTRIP3p Z1Bmf) x 0001
3802 Distance TRIP command - Only Phase L1 (Dis.Trip 1pL1) 0 x 1 0 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 0 x 0 1 1
PDIS10.Op.phsA 00111
device annunciation: 1 - ON IEC Status Op,phsA: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
3813 Distance TRIP single-phase Z1B (Dis.TripZ1B1p) x0100
3825 DisTRIP 3phase in Z1B with single-ph Flt (DisTRIP3p.Z1Bsf) x 0010
3826 DisTRIP 3phase in Z1B with multi-ph Flt. (DisTRIP3p Z1Bmf) x 0001
3803 Distance TRIP command - Only Phase L2 (Dis.Trip 1pL2) 0 x 1 0 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 0 x 0 1 1
PDIS10.Op.phsB 00111
device annunciation: 1 - ON IEC Status Op,phsB: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
Mapping
3.2 Distance Protection (PDISx, PTRC2)
84 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PDIS10.Op.phsC
PDIS10.StrAG
PDIS10.StrBG
PDIS10.StrCG
No. Information
3813 Distance TRIP single-phase Z1B (Dis.TripZ1B1p) x 0100
3825 DisTRIP 3phase in Z1B with single-ph Flt (DisTRIP3p.Z1Bsf) x 0010
3826 DisTRIP 3phase in Z1B with multi-ph Flt. (DisTRIP3p Z1Bmf) x 0001
3804 Distance TRIP command - Only Phase L3 (Dis.Trip 1pL3) 0 x 1 0 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 0 x 0 1 1
PDIS10.Op.phsC 00111
device annunciation : 1 - ON IEC Status Op,phsC: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
3741 Distance Pickup Z1, Loop L1E (Dis. Z1 L1E) 0 1
PDIS10.StrAG.stVal 0 1
device annunciation: 1 - ON IEC Status StrAG.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3742 Distance Pickup Z1, Loop L2E (Dis. Z1 L2E) 0 1
PDIS10.StrBG.stVal 0 1
device annunciation: 1 - ON IEC Status StrBG.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3743 Distance Pickup Z1, Loop L3E (Dis. Z1 L3E) 0 1
PDIS10.StrCG.stVal 0 1
device annunciation : 1 - ON IEC Status StrCG.stVal: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.2 Distance Protection (PDISx, PTRC2)
85SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PDIS10.StrAB
PDIS10.StrBC
PDIS10.StrCA
No. Information
3744 Distance Pickup Z1, Loop L12 (Dis. Z1 L12) 0 1
PDIS10.StrAB.stVal 0 1
device annunciation: 1 - ON IEC Status StrAB.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3745 Distance Pickup Z1, Loop L23 (Dis. Z1 L23) 0 1
PDIS10.StrBC.stVal 0 1
device annunciation: 1 - ON IEC Status StrBC.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3746 Distance Pickup Z1, Loop L31 (Dis. Z1 L31) 0 1
PDIS10.StrCA.stVal 0 1
device annunciation: 1 - ON IEC Status StrCA.stVal: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.2 Distance Protection (PDISx, PTRC2)
86 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.2.3 Distance protection zone 2 (PDIS2)
PDIS2.Mod
PDIS2.Health
PDIS2.Str
No. Information
3653 Distance is ACTIVE (Dist. ACTIVE) 0 x x 1111
3652 Distance is BLOCKED (Dist. BLOCK) x x x 0011
3603 >BLOCK 21 Distance (>BLOCK 21 Dist.) x x x 0101
3651 Distance is switched off (Dist. OFF) x 1 x 0000
Op. mode Z2 (P1311) = Inactive x x 10000
PDIS2.Mod.stVal 5551222
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 1100
3655 Setting error K0(>Z1) or Angle K0(>Z1) (DisErrorK0(>Z1)) 1010
PDIS2.Health.stVal 2133
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
3755 Distance Pickup Z2 (Dis. Pickup Z2) 0 1
PDIS2.Str.general 0 1
device annunciati on : 1 - ON IEC Status Str.gene ra l : 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.2 Distance Protection (PDISx, PTRC2)
87SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PDIS2.Str.dirGeneral
PDIS2.Op
PDIS2.Op.phsA
No. Information
3719 Distance Pickup FORWARD (Dis. forward) x0011
3720 Distance Pickup REVERSE (Dis. reverse) x 0101
3755 Distance Pickup Z2 (Dis. Pickup Z2) 01111
PDIS2.Str.dirGeneral 00213
device annunciation: 1 - ON IEC Status Str.dirGeneral: 0 - UNKNOWN
0 - OFF 1 - FORWARD
2 - BACKWARD
3 - BOTH
No. Information
3816 Distance TRIP single-phase Z2 (Dis.TripZ2/1p) 0011
3817 Distance TRIP 3phase in Z2 (Dis.TripZ2/3p) 0101
PDIS2.Op.general 0111
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3816 Distance TRIP single-phase Z2 (Dis.TripZ2/1p) 0 x 1 0
3817 Distance TRIP 3phase in Z2 (Dis.TripZ2/3p) 0 x 0 1
3802 Distance TRIP command - Only Phase L1 (Dis.Trip 1pL1) x 0 1 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1
PDIS2.Op.phsA 0011
device annunciation: 1 - ON IEC Status Op.phsA: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
Mapping
3.2 Distance Protection (PDISx, PTRC2)
88 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PDIS2.Op.phsB
PDIS2.Op.phsC
No. Information
3816 Distance TRIP single-phase Z2 (Dis.TripZ2/1p) 0 x 1 0
3817 Distance TRIP 3phase in Z2 (Dis.TripZ2/3p) 0 x 0 1
3803 Distance TRIP command - Only Phase L2 (Dis.Trip 1pL2) x 0 1 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1
PDIS2.Op.phsB 0011
device annunciation : 1 - ON IEC Status Op.phsB: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
3816 Distance TRIP single-phase Z2 (Dis.TripZ2/1p) 0 x 1 0
3817 Distance TRIP 3phase in Z2 (Dis.TripZ2/3p) 0 x 0 1
3804 Distance TRIP command - Only Phase L3 (Dis.Trip 1pL3) x 0 1 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1
PDIS2.Op.phsC 0011
device annunciation : 1 - ON IEC Status Op.phsC: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
Mapping
3.2 Distance Protection (PDISx, PTRC2)
89SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.2.4 Distance protection zone 3 (PDIS3)
PDIS3.Mod
PDIS3.Health
No. Information
3653 Distance is ACTIVE (Dist. ACTIVE) 0xx1111
3652 Distance is BLOCKED (Dist. BLOCK) xxx0011
3603 >BLOCK 21 Distance (>BLOCK 21 Dist.) xxx0101
3651 Distance is switched off (Dist. OFF) x 1 x 0000
Op. mode Z3 (P1321) = Inactive x x 10000
PDIS3.Mod.stVal 5551222
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 1100
3655 Setting error K0(>Z1) or Angle K0(>Z1) (DisErrorK0(>Z1)) 1010
PDIS3.Health.stVal 2133
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
Mapping
3.2 Distance Protection (PDISx, PTRC2)
90 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PDIS3.Str
PDIS3.Str.dirGeneral
PDIS3.Op
No. Information
3758 Distance Pickup Z3 (Dis. Pickup Z3) 0 1
PDIS3.Str.general 0 1
device annunciati on : 1 - ON IEC Status Str.gene ra l : 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3719 Distance Pickup FORWARD (Dis. forward) x 0011
3720 Distance Pickup REVERSE (Dis. reverse) x 0101
3758 Distance Pickup Z3 (Dis. Pickup Z3) 01111
PDIS3.Str.dirGeneral 00213
device annunciati on : 1 - ON IEC Status Str.dirGener al : 0 - UNKNOWN
0 - OFF 1 - FORWARD
2 - BACKWARD
3 - BOTH
No. Information
3818 Distance TRIP 3phase in Z3 (Dis.TripZ3/T3) 0 1
PDIS3.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
Mapping
3.2 Distance Protection (PDISx, PTRC2)
91SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PDIS3.Op.phsA
PDIS3.Op.phsB
PDIS3.Op.phsC
No. Information
3818 Distance TRIP 3phase in Z3 (Dis.TripZ3/T3) 0111
3802 Distance TRIP command - Only Phase L1 (Dis.Trip 1pL1) x 0 1 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1
PDIS3.Op.phsA 0011
device annunciation: 1 - ON IEC Status Op.phsA: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
3818 Distance TRIP 3phase in Z3 (Dis.TripZ3/T3) 0111
3803 Distance TRIP command - Only Phase L2 (Dis.Trip 1pL2) x 0 1 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1
PDIS3.Op.phsB 0011
device annunciation: 1 - ON IEC Status Op.phsB: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
3818 Distance TRIP 3phase in Z3 (Dis.TripZ3/T3) 0111
3804 Distance TRIP command - Only Phase L3 (Dis.Trip 1pL3) x 0 1 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1
PDIS3.Op.phsC 0011
device annunciation: 1 - ON IEC Status Op.phsC: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
Mapping
3.2 Distance Protection (PDISx, PTRC2)
92 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.2.5 Distance protection zone 4 (PDIS4)
PDIS4.Mod
PDIS4.Health
PDIS4.Str
No. Information
3653 Distance is ACTIVE (Dist. ACTIVE) 0 x x 1111
3652 Distance is BLOCKED (Dist. BLOCK) x x x 0011
3603 >BLOCK 21 Distance (>BLOCK 21 Dist.) x x x 0101
3651 Distance is switched off (Dist. OFF) x 1 x 0000
Op. mode Z4 (P1331) = Inactive x x 10000
PDIS4.Mod.stVal 5551222
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 1100
3655 Setting error K0(>Z1) or Angle K0(>Z1) (DisErrorK0(>Z1)) 1010
PDIS4.Health.stVal 2133
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
3759 Distance Pickup Z4 (Dis. Pickup Z4) 0 1
PDIS4.Str.general 0 1
device annunciati on : 1 - ON IEC Status Str.gene ra l : 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.2 Distance Protection (PDISx, PTRC2)
93SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PDIS4.Str.dirGeneral
PDIS4.Op
No. Information
3719 Distance Pickup FORWARD (Dis. forward) x0011
3720 Distance Pickup REVERSE (Dis. reverse) x 0101
3759 Distance Pickup Z4 (Dis. Pickup Z4) 01111
PDIS4.Str.dirGeneral 00213
device annunciation: 1 - ON IEC Status Str.dirGeneral: 0 - UNKNOWN
0 - OFF 1 - FORWARD
2 - BACKWARD
3 - BOTH
No. Information
3821 Distance TRIP 3phase in Z4 (Dis.TRIP 3p. Z4) 0 1
PDIS4.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.2 Distance Protection (PDISx, PTRC2)
94 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PDIS4.Op.phsA
PDIS4.Op.phsB
PDIS4.Op.phsC
No. Information
3821 Distance TRIP 3phase in Z4 (Dis.TRIP 3p. Z4) 0111
3802 Distance TRIP command - Only Phase L1 (Dis.Trip 1pL1) x 0 1 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1
PDIS4.Op.phsA 0011
device annunciation : 1 - ON IEC Status Op.phsA: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
3821 Distance TRIP 3phase in Z4 (Dis.TRIP 3p. Z4) 0111
3803 Distance TRIP command - Only Phase L2 (Dis.Trip 1pL2) x 0 1 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1
PDIS4.Op.phsB 0011
device annunciation : 1 - ON IEC Status Op.phsB: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
3821 Distance TRIP 3phase in Z4 (Dis.TRIP 3p. Z4) 0111
3804 Distance TRIP command - Only Phase L3 (Dis.Trip 1pL3) x 0 1 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1
PDIS4.Op.phsC 0011
device annunciation : 1 - ON IEC Status Op.phsC: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
Mapping
3.2 Distance Protection (PDISx, PTRC2)
95SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.2.6 Distance protection zone 5 (PDIS5)
PDIS5.Mod
PDIS5.Health
PDIS5.Str
No. Information
3653 Distance is ACTIVE (Dist. ACTIVE) 0xx1111
3652 Distance is BLOCKED (Dist. BLOCK) xxx0011
3603 >BLOCK 21 Distance (>BLOCK 21 Dist.) xxx0101
3651 Distance is switched off (Dist. OFF) x 1 x 0000
Op. mode Z5 (P1341) = Inactive x x 10000
PDIS5.Mod.stVal 5551222
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 1100
3655 Setting error K0(>Z1) or Angle K0(>Z1) (DisErrorK0(>Z1)) 1010
PDIS5.Health.stVal 2133
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
3760 Distance Pickup Z5 (Dis. Pickup Z5) 0 1
PDIS5.Str.general 0 1
device annunciation: 1 - ON IEC Status Str.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.2 Distance Protection (PDISx, PTRC2)
96 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PDIS5.Str.dirGeneral
PDIS5.Op
No. Information
3719 Distance Pickup FORWARD (Dis. forward) x 0011
3720 Distance Pickup REVERSE (Dis. reverse) x 0101
3760 Distance Pickup Z5 (Dis. Pickup Z5) 01111
PDIS5.Str.dirGeneral 00213
device annunciati on : 1 - ON IEC Status Str.dirGener al : 0 - UNKNOWN
0 - OFF 1 - FORWARD
2 - BACKWARD
3 - BOTH
No. Information
3822 Distance TRIP 3phase in Z5 (Dis.TRIP 3p. Z5) 0 1
PDIS5.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.2 Distance Protection (PDISx, PTRC2)
97SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PDIS5.Op.phsA
PDIS5.Op.phsB
PDIS5.Op.phsC
No. Information
3822 Distance TRIP 3phase in Z5 (Dis.TRIP 3p. Z5) 0111
3802 Distance TRIP command - Only Phase L1 (Dis.Trip 1pL1) x 0 1 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1
PDIS5.Op.phsA 0011
device annunciation: 1 - ON IEC Status Op.phsA: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
3822 Distance TRIP 3phase in Z5 (Dis.TRIP 3p. Z5) 0111
3803 Distance TRIP command - Only Phase L2 (Dis.Trip 1pL2) x 0 1 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1
PDIS5.Op.phsB 0011
device annunciation: 1 - ON IEC Status Op.phsB: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
3822 Distance TRIP 3phase in Z5 (Dis.TRIP 3p. Z5) 0111
3804 Distance TRIP command - Only Phase L3 (Dis.Trip 1pL3) x 0 1 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) x 0 0 1
PDIS5.Op.phsC 0011
device annunciation: 1 - ON IEC Status Op.phsC: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
Mapping
3.2 Distance Protection (PDISx, PTRC2)
98 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.2.7 Distance protection general information (PTRC2)
PTRC2.Mod
PTRC2.Health
PTRC2.Str
No. Information
3653 Distance is ACTIVE (Dist. ACTIVE) 0 1 0 0 0
3652 Distance is BLOCKED (Dist. BLOCK) x 0 1 0 1
3603 >BLOCK 21 Distance (>BLOCK 21 Dist.) x 0 0 1 1
3651 Distance is switched off (Dist. OFF) 1 0 0 0 0
PTRC2.Mod.stVal 51222
device annunciati on : 1 - ON IEC Status Mod.stVal : 1 - ON
0 - OFF 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
3654 Setting error K0(Z1) or Angle K0(Z1) (Dis.ErrorK0(Z1)) x 0101
3655 Setting error K0(>Z1) or Angle K0(>Z1) (DisErrorK0(>Z1)) x 0011
51 Device is Operational and Protecting (Device OK) 01111
PTRC2.Health.stVal 31222
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
3671 Distance PICKED UP (Dis. PICKUP) 0 1
PTRC2.Str.general 0 1
device annunciati on : 1 - ON IEC Status Str.gene ra l : 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.2 Distance Protection (PDISx, PTRC2)
99SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTRC2.Str.dirGeneral
PTRC2.Str.phsA
PTRC2.Str.dirPhsA
No. Information
3720 Distance Pickup REVERSE (Dis. reverse) 1100
3719 Distance Pickup FORWARD (Dis. forward) 1010
PTRC2.Str.dirGeneral 3210
device annunciation: 1 - ON IEC Status Str.dirGeneral: 0 - UNKNOWN
0 - OFF 1 - FORWARD
2 - BACKWARD
3 - BOTH
No. Information
3672 Distance PICKUP L1 (Dis.Pickup L1) 0 1
PTRC2.Str.phsA 0 1
device annunciation: 1 - ON IEC Status Str.phsA: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3701 Distance Loop L1E selected forward (Dis.Loop L1-E f) 1 x x 00011xxxx0
3704 Distance Loop L12 selected forward (Dis.Loop L1-2 f) x 1 x 0 0 0 x x 1 1 x x 0
3706 Distance Loop L31 selected forward (Dis.Loop L3-1 f) x x 1000xxxx110
3707 Distance Loop L1E selected reverse (Dis.Loop L1-E r) 0001xx001x1x0
3710 Distance Loop L12 selected reverse (Dis.Loop L1-2 r) 0 0 0 x 1 x 1 x 0 0 x 1 0
3712 Distance Loop L31 selected reverse (Dis.Loop L3-1 r) 0 0 0 x x 1 x 1 x 1000
PTRC2.Str.dirPhsA 1112223333330
device annunciation: 1 - ON IEC Status Str.dirPhsA: 0 - UNKNOWN
0 - OFF 1 - FORWARD
x - irrelevant 2 - BACKWARD
Mapping
3.2 Distance Protection (PDISx, PTRC2)
100 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTRC2.Str.phsB
PTRC2.Str.dirPhsB
No. Information
3673 Distance PICKUP L2 (Dis.Pickup L2) 0 1
PTRC2.Str.phsB 0 1
device annunciation : 1 - ON IEC Status Str.phsB: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3702 Distance Loop L2E selected forward (Dis.Loop L2-E f) 1 x x 0 0 0 1 1 xxxx0
3704 Distance Loop L12 selected forward (Dis.Loop L1-2 f) x 1 x 0 0 0 x x 1 1 x x 0
3705 Distance Loop L23 selected forward (Dis.Loop L2-3 f) x x 1000xxxx110
3708 Distance Loop L2E selected reverse (Dis.Loop L2-E r) 0001xx001x1x0
3710 Distance Loop L12 selected reverse (Dis.Loop L1-2 r) 0 0 0 x 1 x 1 x 0 0 x 1 0
3711 Distance Loop L23 selected reverse (Dis.Loop L2-3 r) 0 0 0 x x 1 x 1 x 1000
PTRC2.Str.dirPhsB 1112223333330
device annunciati on : 1 - ON IEC Status Str .d i rP hsB: 0 - UNKNOWN
0 - OFF 1 - FORWARD
x - irrelevant 2 - BACKWARD
Mapping
3.2 Distance Protection (PDISx, PTRC2)
101SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTRC2.Str.phsC
PTRC2.Str.dirPhsC
PTRC2.Str.neut
PTRC2.Op
No. Information
3674 Distance PICKUP L3 (Dis.Pickup L3) 0 1
PTRC2.Str.phsC 0 1
device annunciation: 1 - ON IEC Status Str.phsC: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3703 Distance Loop L3E selected forward (Dis.Loop L3-E f) 1 x x 00011xxxx0
3705 Distance Loop L23 selected forward (Dis.Loop L2-3 f) x 1 x 0 0 0 x x 1 1 x x 0
3706 Distance Loop L31 selected forward (Dis.Loop L3-1 f) x x 1000xxxx110
3709 Distance Loop L3E selected reverse (Dis.Loop L3-E r) 0001xx001x1x0
3711 Distance Loop L23 selected reverse (Dis.Loop L2-3 r) 0 0 0 x 1 x 1 x 0 0 x 1 0
3712 Distance Loop L31 selected reverse (Dis.Loop L3-1 r) 0 0 0 x x 1 x 1 x 1000
PTRC2.Str.dirPhsC 1112223333330
device annunciation: 1 - ON IE C Status St r.dirPhsC: 0 - UNKNOWN
0 - OFF 1 - FORWARD
x - irrelevant 2 - BACKWARD
No. Information
3675 Distance PICKUP Earth (Dis.Pickup E) 0 1
PTRC2.Str.neut 0 1
device annunciation: 1 - ON IEC Status Str.neut: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3801 Distance protection: General trip (Dis.Gen. Trip) 0 1
PTRC2.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.2 Distance Protection (PDISx, PTRC2)
102 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTRC2.Op.phsA
PTRC2.Op.phsB
PTRC2.Op.phsC
No. Information
3802 Distance TRIP command - Only Phase L1 (Dis.Trip 1pL1) 1 0 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 0 1 0
PTRC2.Op.phsA 1 1 0
device annunciation : 1 - ON IEC Status Op.phsA: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3803 Distance TRIP command - Only Phase L2 (Dis.Trip 1pL2) 1 0 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 0 1 0
PTRC2.Op.phsB 1 1 0
device annunciation : 1 - ON IEC Status Op.phsB: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3804 Distance TRIP command - Only Phase L3 (Dis.Trip 1pL3) 1 0 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 0 1 0
PTRC2.Op.phsC 1 1 0
device annunciation : 1 - ON IEC Status Op.phsC: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.3 Power swing detection (RPSBx)
103SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.3 Power swing detection (RPSBx)
3.3.1 Power swing detection zone 1 (RPSB1)
RPSB1.Mod
RPSB1.Health
RPSB1.Str
No. Information
3651 Distance is switched off (Dist. OFF) x x 1 0 0
4160 >BLOCK Power Swing detection (>Pow. Swing BLK) x x x 0 1
Power Swing (P 120) = Enabled and Dis. PICKUP (P 114) = Z< (quadrilat.) 01111
P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block x 1 x 0 0
RPSB1.Mod.stVal 55512
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
RPSB1.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
4164 Power Swing detected (Power Swing) 0 1 x
P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block 0 0 1
RPSB1.Str.general 0 1 0
device annunciation / setting: 1 - ON / TRUE IEC Status Str.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
x - irrelevant
Mapping
3.3 Power swing detection (RPSBx)
104 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
RPSB1.Str.phsA
RPSB1.Str.phsB
RPSB1.Str.phsC
RPSB1.BlkZn
No. Information
4167 Power Swing detected in L1 (Pow. Swing L1) 0 1 x
P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block 0 0 1
RPSB1.Str.phsA 0 1 0
device annunciation / setting: 1 - ON / TRUE IEC Status Str.phsA: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
4168 Power Swing detected in L2 (Pow. Swing L2) 0 1 x
P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block 0 0 1
RPSB1.Str.phsB 0 1 0
device annunciation / setting: 1 - ON / TRUE IEC Status Str.phsB: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
4169 Power Swing detected in L3 (Pow. Swing L3) 0 1 x
P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block 0 0 1
RPSB1.Str.phsC 0 1 0
device annunciation / setting: 1 - ON / TRUE IEC Status Str.phsC: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
4164 Power Swing detected (Power Swing) 0 1 1 x
4166 Power Swing TRIP command (Pow. Swing TRIP) 0 0 1 x
P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block 0001
RPSB1.BlkZn.stVal 0100
device annunciation / setting: 1 - ON / TRUE IEC Status BlkZn.stVal: 0 - NOT BLOCKED
0 - OFF / FALSE 1 - BLOCKED
Mapping
3.3 Power swing detection (RPSBx)
105SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.3.2 Power swing detection zone 1B (RPSB10)
RPSB10.Mod
RPSB10.Health
RPSB10.Str
No. Information
4160 >BLOCK Power Swing detection (>Pow. Swing BLK) x 0 1 x
Power Swing (P 120) = Enabled and Dis. PICKUP (P 114) = Z< (quadrilat.) 0111
P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block x 0 0 1
RPSB10.Mod.stVal 5125
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
RPSB10.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
4164 Power Swing detected (Power Swing) 0 1 x
P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block 0 0 1
RPSB1.Str.general 010
device annunciation / setting: 1 - ON / TRUE IEC Status Str.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
x - irrelevant
Mapping
3.3 Power swing detection (RPSBx)
106 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
RPSB10.Str.phsA
RPSB10.Str.phsB
RPSB10.Str.phsC
RPSB10.BlkZn
No. Information
4167 Power Swing detected in L1 (Pow. Swing L1) 0 1 x
P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block 0 0 1
RPSB10.Str.phsA 010
device annunciation / setting: 1 - ON / TRUE IEC Status Str.phsA: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
4168 Power Swing detected in L2 (Pow. Swing L2) 0 1 x
P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block 0 0 1
RPSB10.Str.phsB 010
device annunciation / setting: 1 - ON / TRUE IEC Status Str.phsB: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
4169 Power Swing detected in L3 (Pow. Swing L3) 0 1 x
P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block 0 0 1
RPSB10.Str.phsC 010
device annunciation / setting: 1 - ON / TRUE IEC Status Str.phsC: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
4164 Power Swing detected (Power Swing) 0 1 1 x
4166 Power Swing TRIP command (Pow. Swing TRIP) 0 0 1 x
P/S Op. mode (P2002) = All zones block or Z1/Z1B block or Z1,Z1B,Z2 block 0001
RPSB10.BlkZn.stVal 0100
device annunciation / setting: 1 - ON / TRUE IEC Status BlkZn.stVal: 0 - NOT BLOCKED
0 - OFF / FALSE 1 - BLOCKED
Mapping
3.3 Power swing detection (RPSBx)
107SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.3.3 Power swing detection zone 2 (RPSB2)
RPSB2.Mod
RPSB2.Health
RPSB2.Str
No. Information
4160 >BLOCK Power Swing detection (>Pow. Swing BLK) x 0 1 x
Power Swing (P 120) = Enabled and Dis. PICKUP (P 114) = Z< (quadrilat.) 0111
P/S Op. mode (P2002) = All zones block or Z1,Z1B,Z2 block or Z2 to Z5 block x 0 0 1
RPSB2.Mod.stVal 5125
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
RPSB2.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
4164 Power Swing detected (Power Swing) 0 1 x
P/S Op. mode (P2002) = All zones block or Z1,Z1B,Z2 block or Z2 to Z5 block 0 0 1
RPSB1.Str.general 010
device annunciation / setting: 1 - ON / TRUE IEC Status Str.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
x - irrelevant
Mapping
3.3 Power swing detection (RPSBx)
108 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
RPSB2.Str.phsA
RPSB2.Str.phsB
RPSB2.Str.phsC
RPSB2.BlkZn
No. Information
4167 Power Swing detected in L1 (Pow. Swing L1) 0 1 x
P/S Op. mode (P2002) = All zones block or Z1,Z1B,Z2 block or Z2 to Z5 block 0 0 1
RPSB2.Str.phsA 010
device annunciation / setting: 1 - ON / TRUE IEC Status Str.phsA: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
4168 Power Swing detected in L2 (Pow. Swing L2) 0 1 x
P/S Op. mode (P2002) = All zones block or Z1,Z1B,Z2 block or Z2 to Z5 block 0 0 1
RPSB2.Str.phsB 010
device annunciation / setting: 1 - ON / TRUE IEC Status Str.phsB: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
4169 Power Swing detected in L3 (Pow. Swing L3) 0 1 x
P/S Op. mode (P2002) = All zones block or Z1,Z1B,Z2 block or Z2 to Z5 block 0 0 1
RPSB2.Str.phsC 010
device annunciation / setting: 1 - ON / TRUE IEC Status Str.phsC: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
4164 Power Swing detected (Power Swing) 0 1 1 x
4166 Power Swing TRIP command (Pow. Swing TRIP) 0 0 1 x
P/S Op. mode (P2002) = All zones block or Z1,Z1B,Z2 block or Z2 to Z5 block 0001
RPSB2.BlkZn.stVal 0100
device annunciation / setting: 1 - ON / TRUE IEC Status BlkZn.stVal: 0 - NOT BLOCKED
0 - OFF / FALSE 1 - BLOCKED
Mapping
3.3 Power swing detection (RPSBx)
109SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.3.4 Power swing detection zone 3 (RPSB3)
RPSB3.Mod
RPSB3.Health
RPSB3.Str
No. Information
4160 >BLOCK Power Swing detection (>Pow. Swing BLK) x 0 1 x
Power Swing (P 120) = Enabled and Dis. PICKUP (P 114) = Z< (quadrilat.) 0111
P/S Op. mode (P2002) = All zones block or Z2 to Z5 block x 0 0 1
RPSB3.Mod.stVal 5125
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
RPSB3.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
4164 Power Swing detected (Power Swing) 0 1 x
P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1
RPSB1.Str.general 0 1 0
device annunciation / setting: 1 - ON / TRUE IEC Status Str.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
x - irrelevant
Mapping
3.3 Power swing detection (RPSBx)
110 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
RPSB3.Str.phsA
RPSB3.Str.phsB
RPSB3.Str.phsC
RPSB3.BlkZn
No. Information
4167 Power Swing detected in L1 (Pow. Swing L1) 0 1 x
P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1
RPSB3.Str.phsA 0 1 0
device annunciation / setting: 1 - ON / TRUE IEC Status Str.phsA: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
4168 Power Swing detected in L2 (Pow. Swing L2) 0 1 x
P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1
RPSB3.Str.phsB 0 1 0
device annunciation / setting: 1 - ON / TRUE IEC Status Str.phsB: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
4169 Power Swing detected in L3 (Pow. Swing L3) 0 1 x
P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1
RPSB3.Str.phsC 0 1 0
device annunciation / setting: 1 - ON / TRUE IEC Status Str.phsC: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
4164 Power Swing detected (Power Swing) 0 1 1 x
4166 Power Swing TRIP command (Pow. Swing TRIP) 0 0 1 x
P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0001
RPSB3.BlkZn.stVal 0100
device annunciation / setting: 1 - ON / TRUE IEC Status BlkZn.stVal: 0 - NOT BLOCKED
0 - OFF / FALSE 1 - BLOCKED
Mapping
3.3 Power swing detection (RPSBx)
111SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.3.5 Power swing detection zone 4 (RPSB4)
RPSB4.Mod
RPSB4.Health
RPSB4.Str
No. Information
4160 >BLOCK Power Swing detection (>Pow. Swing BLK) x 0 1 x
Power Swing (P 120) = Enabled and Dis. PICKUP (P 114) = Z< (quadrilat.) 0111
P/S Op. mode (P2002) = All zones block or Z2 to Z5 block x 0 0 1
RPSB4.Mod.stVal 5125
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
RPSB4.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
4164 Power Swing detected (Power Swing) 0 1 x
P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1
RPSB1.Str.general 0 1 0
device annunciation / setting: 1 - ON / TRUE IEC Status Str.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
x - irrelevant
Mapping
3.3 Power swing detection (RPSBx)
112 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
RPSB4.Str.phsA
RPSB4.Str.phsB
RPSB4.Str.phsC
RPSB4.BlkZn
No. Information
4167 Power Swing detected in L1 (Pow. Swing L1) 0 1 x
P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1
RPSB4.Str.phsA 0 1 0
device annunciation / setting: 1 - ON / TRUE IEC Status Str.phsA: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
4168 Power Swing detected in L2 (Pow. Swing L2) 0 1 x
P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1
RPSB4.Str.phsB 0 1 0
device annunciation / setting: 1 - ON / TRUE IEC Status Str.phsB: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
4169 Power Swing detected in L3 (Pow. Swing L3) 0 1 x
P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1
RPSB4.Str.phsC 0 1 0
device annunciation / setting: 1 - ON / TRUE IEC Status Str.phsC: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
4164 Power Swing detected (Power Swing) 0 1 1 x
4166 Power Swing TRIP command (Pow. Swing TRIP) 0 0 1 x
P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0001
RPSB4.BlkZn.stVal 0100
device annunciation / setting: 1 - ON / TRUE IEC Status BlkZn.stVal: 0 - NOT BLOCKED
0 - OFF / FALSE 1 - BLOCKED
Mapping
3.3 Power swing detection (RPSBx)
113SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.3.6 Power swing detection zone 5 (RPSB5)
RPSB5.Mod
RPSB5.Health
RPSB5.Str
No. Information
4160 >BLOCK Power Swing detection (>Pow. Swing BLK) x 0 1 x
Power Swing (P 120) = Enabled and Dis. PICKUP (P 114) = Z< (quadrilat.) 0111
P/S Op. mode (P2002) = All zones block or Z2 to Z5 block x 0 0 1
RPSB5.Mod.stVal 5125
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
RPSB5.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
4164 Power Swing detected (Power Swing) 0 1 x
P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1
RPSB1.Str.general 0 1 0
device annunciation / setting: 1 - ON / TRUE IEC Status Str.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
x - irrelevant
Mapping
3.3 Power swing detection (RPSBx)
114 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
RPSB5.Str.phsA
RPSB5.Str.phsB
RPSB5.Str.phsC
RPSB5.BlkZn
No. Information
4167 Power Swing detected in L1 (Pow. Swing L1) 0 1 x
P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1
RPSB5.Str.phsA 0 1 0
device annunciation / setting: 1 - ON / TRUE IEC Status Str.phsA: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
4168 Power Swing detected in L2 (Pow. Swing L2) 0 1 x
P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1
RPSB5.Str.phsB 0 1 0
device annunciation / setting: 1 - ON / TRUE IEC Status Str.phsB: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
4169 Power Swing detected in L3 (Pow. Swing L3) 0 1 x
P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0 0 1
RPSB5.Str.phsC 0 1 0
device annunciation / setting: 1 - ON / TRUE IEC Status Str.phsC: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
4164 Power Swing detected (Power Swing) 0 1 1 x
4166 Power Swing TRIP command (Pow. Swing TRIP) 0 0 1 x
P/S Op. mode (P2002) = All zones block or Z2 to Z5 block 0001
RPSB5.BlkZn.stVal 0100
device annunciation / setting: 1 - ON / TRUE IEC Status BlkZn.stVal: 0 - NOT BLOCKED
0 - OFF / FALSE 1 - BLOCKED
Mapping
3.3 Power swing detection (RPSBx)
115SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.3.7 Power swing trip command (RPSB6)
RPSB6.Mod
RPSB6.Health
RPSB6.Op
No. Information
4160 >BLOCK Power Swing detection (>Pow. Swing BLK) x 0 1 x
Power Swing (P 120) = Enabled and Dis. PICKUP (P 114) = Z< (quadrilat.) 0111
PowerSwing trip (P2006) = YES x 0 0 1
RPSB6.Mod.stVal 5125
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
RPSB6.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
4166 Power Swing TRIP command (Pow. Swing TRIP) 0 1
RPSB6.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.4 Teleprotection for distance protection (PSCH1)
116 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.4 Teleprotection for dist ance protection (PSCH1)
PSCH1.Mod
PSCH1.Health
PSCH1.ProTx
No. Information
4003 >Distance Teleprotection BLOCK (>Dis.Telep. Blk) 1100
4052 Dis. Teleprotection is switched OFF (Dis.Telep. OFF) 1010
PSCH1.Mod.stVal 5251
device annunciati on : 1 - ON IEC Status Mod.stVal : 1 - ON
0 - OFF 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PSCH1.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
4057 Dis. Telep. Carrier SEND signal, L1 (Dis.T.SEND L1) 1 1 x x x 0
4058 Dis. Telep. Carrier SEND signal, L2 (Dis.T.SEND L2) 1 x 1 x x 0
4059 Dis. Telep. Carrier SEND signal, L3 (Dis.T.SEND L3) 1 x x 1 x 0
4056 Dis. Telep. Carrier SEND signal (Dis.T.SEND) 1 x x x 1 0
PSCH1.ProTx.stVal 111110
device annunciation : 1 - ON IEC Status ProTx.stVal: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
Mapping
3.4 Teleprotection for distance protection (PSCH1)
117SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PSCH1.ProRx
PSCH1.Str
PSCH1.Str.phsA
PSCH1.Str.phsB
No. Information
4054 Dis. Telep. Carrier signal received (Dis.T.Carr.rec.) 0 1
PSCH1.ProRx.stVal 0 1
device annunciation: 1 - ON IEC Status ProRx.stV al: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
4057 Dis. Telep. Carrier SEND signal, L1 (Dis.T.SEND L1) 1 1 x x x 0
4058 Dis. Telep. Carrier SEND signal, L2 (Dis.T.SEND L2) 1 x 1 x x 0
4059 Dis. Telep. Carrier SEND signal, L3 (Dis.T.SEND L3) 1 x x 1 x 0
4056 Dis. Telep. Carrier SEND signal (Dis.T.SEND) 1 x x x 1 0
PSCH1.Str.general 111110
device annunciation: 1 - ON IEC Status Str.general: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
4057 Dis. Telep. Carrier SEND signal, L1 (Dis.T.SEND L1) 0 1
PSCH1.Str.phsA 0 1
device annunciation: 1 - ON IEC Status Str.phsA: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
4058 Dis. Telep. Carrier SEND signal, L2 (Dis.T.SEND L2) 0 1
PSCH1.Str.phsB 0 1
device annunciation: 1 - ON IEC Status Str.phsB: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.4 Teleprotection for distance protection (PSCH1)
118 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PSCH1.Str.phsC
PSCH1.Op
No. Information
4059 Dis. Telep. Carrier SEND signal, L3 (Dis.T.SEND L3) 0 1
PSCH1.Str.phsC 0 1
device annunciation : 1 - ON IEC Status Str.phsC: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
3850 DisTRIP Z1B with Teleprotection scheme (DisTRIP Z1B Tel) 0 1
PSCH1.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.4 Teleprotection for distance protection (PSCH1)
119SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PSCH1.Op.phsA
PSCH1.Op.phsB
PSCH1.Op.phsC
No. Information
3850 DisTRIP Z1B with Teleprotection scheme (DisTRIP Z1B Tel) 111000
3802 Distance TRIP command - Only Phase L1 (Dis.Trip 1pL1) 1 1 x 1 x 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 1 x 1 x 1 0
PSCH1.Op.phsA 111000
device annunciation: 1 - ON IEC Status Op.phsA: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
3850 DisTRIP Z1B with Teleprotection scheme (DisTRIP Z1B Tel) 111000
3803 Distance TRIP command - Only Phase L2 (Dis.Trip 1pL2) 1 1 x 1 x 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 1 x 1 x 1 0
PSCH1.Op.phsB 111000
device annunciation: 1 - ON IEC Status Op.phsB: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
3850 DisTRIP Z1B with Teleprotection scheme (DisTRIP Z1B Tel) 111000
3804 Distance TRIP command - Only Phase L3 (Dis.Trip 1pL3) 1 1 x 1 x 0
3805 Distance TRIP command Phases L123 (Dis.Trip 3p) 1 x 1 x 1 0
PSCH1.Op.phsC 111000
device annunciation: 1 - ON IEC Status OP.phsC: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
Mapping
3.4 Teleprotection for distance protection (PSCH1)
120 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PSCH1.CarRx
PSCH1.LosOfGrd
PSCH1.Echo
No. Information
4030 >Dis.Tele. Unblocking: UNBLOCK Channel 1 (>Dis.T.UB ub 1) 1 1 x x x x 0
4035 >Dis.Tele. Unblocking: UNBLOCK Channel 2 (>Dis.T.UB ub 2) 1 x 1 x x x 0
4032 >Dis.Tele. Unblocking: UNBLOCK Ch. 1, L1 (>Dis.T.UB ub1L1) 1 x x 1 x x 0
4033 >Dis.Tele. Unblocking: UNBLOCK Ch. 1, L2 (>Dis.T.UB ub1L2) 1 x x x 1 x 0
4034 >Dis.Tele. Unblocking: UNBLOCK Ch. 1, L3 (>Dis.T.UB ub1L3) 1 x x x x 1 0
PSCH1.CarRx.general 1111110
device annunciati on : 1 - ON IEC Status CarRx. gen er al: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
4055 Dis. Telep. Carrier CHANNEL FAILURE (Dis.T.Carr.Fail) 1 x x 0
4080 Dis. Tele.Unblocking: FAILURE Channel 1 (Dis.T.UB Fail1) 1 1 x 0
4081 Dis. Tele.Unblocking: FAILURE Channel 2 (Dis.T.UB Fail2) 1 x 1 0
PSCH1.LosOfGrd.stVal 1110
device annunciation: 1 - ON IEC Status LosOfGrd.stVal: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
4246 ECHO Send SIGNAL (ECHO SIGNAL) 0 1
PSCH1.Echo.stVal 0 1
device annunciation : 1 - ON IEC Status Echo.stVal: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.4 Teleprotection for distance protection (PSCH1)
121SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PSCH1.WeiOp.general
PSCH1.WeiOp.phsA
PSCH1.WeiOp.phsB
PSCH1.WeiOp.phsC
No. Information
4241 Weak Infeed General TRIP command (WeakInfeed TRIP) 0 1
PSCH1.WeiOp.general 0 1
device annunciation: 1 - ON IEC Status WeiOp.general: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
4242 Weak Infeed TRIP command - Only L1 (Weak TRIP 1p.L1) 1 1 x 0
4245 Weak Infeed TRIP command L123 (Weak TRIP L123) 1 x 1 0
PSCH1.WeiOp.phsA 1110
device annunciation: 1 - ON IEC Status WeiOp.phsA: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
4243 Weak Infeed TRIP command - Only L2 (Weak TRIP 1p.L2) 1 1 x 0
4245 Weak Infeed TRIP command L123 (Weak TRIP L123) 1 x 1 0
PSCH1.WeiOp.phsB 1110
device annunciation: 1 - ON IEC Status WeiOp.phsB: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
4244 Weak Infeed TRIP command - Only L3 (Weak TRIP 1p.L3) 1 1 x 0
4245 Weak Infeed TRIP command L123 (Weak TRIP L123) 1 x 1 0
PSCH1.WeiOp.phsC 1110
device annunciation: 1 - ON IEC Status WeiOp.phsC: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
Mapping
3.4 Teleprotection for distance protection (PSCH1)
122 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PSCH1.RvABlk
PSCH1.GrdRx
No. Information
4068 Dis. Telep. Transient Blocking (Dis.T.Trans.Blk) 0 1
PSCH1.RvABlk.stval 0 1
device annunciation : 1 - ON IEC Status RvABlk.stVal: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
4031 >Dis.Tele. Unblocking: BLOCK Channel 1 (>Dis.T.UB bl 1) 1 x 0
4036 >Dis.Tele. Unblocking: BLOCK Channel 2 (>Dis.T.UB bl 2) x 1 0
PSCH1.GrdRx.stVal 1 1 0
device annunciation : 1 - ON IEC Status GrdRx.stVal: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
Mapping
3.5 Earth fault overcurrent protection in earthed systems (PTOCx)
123SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.5 Earth fault overcurrent protection in earthed systems
(PTOCx)
3.5.1 Earth fault 3I0 > (PTOC5)
PTOC5.Mod
PTOC5.Health
PTOC5.Str
No. Information
1333 Earth fault protection is ACTIVE (E/F ACTIVE) x x 01111
1332 Earth fault protection is BLOCKED (E/F BLOCK) x x x 0110
1308 >Earth Fault O/C Block 3I0> (>EF BLOCK 3I0>) x x x 1010
1331 Earth fault protection is switched OFF (E/F Prot. OFF) 1 x x 0000
Op. mode 3I0> (P3130) = Inactive x 1 x 0000
PTOC5.Mod.stVal 5552221
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOC5.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
1356 E/F 3I0> PICKED UP (EF 3I0> Pickup) 0 1
PTOC5.Str.general 0 1
device annunciation: 1 - ON IEC Status Str.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.5 Earth fault overcurrent protection in earthed systems (PTOCx)
124 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTOC5.Str.dirGeneral
PTOC5.Op
No. Information
1358 E/F picked up FORWARD (EF forward) x 1100
1359 E/F picked up REVERSE (EF reverse) x 1010
1356 E/F 3I0> PICKED UP (EF 3I0> Pickup) 01111
PTOC5.Str.dirGeneral 03120
device annunciati on : 1 - ON IEC Status Str.dirGener al : 0 - UNKNOWN
0 - OFF 1 - FORWARD
2 - BACKWARD
3 - BOTH
No. Information
1368 E/F 3I0> TRIP (EF 3I0> TRIP) 0 1
PTOC5.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.5 Earth fault overcurrent protection in earthed systems (PTOCx)
125SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.5.2 Earth fault 3I0 >> (PTOC6)
PTOC6.Mod
PTOC6.Health
PTOC6.Str
No. Information
1333 Earth fault protection is ACTIVE (E/F ACTIVE) xx01111
1332 Earth fault protection is BLOCKED (E/F BLOCK) xxx0110
1307 >Earth Fault O/C Block 3I0>> (>EF BLOCK 3I0>>) xxx1010
1331 Earth fault protection is switched OFF (E/F Prot. OFF) 1 x x 0000
Op. mode 3I0>> (P3120) = Inactive x 1 x 0000
PTOC6.Mod.stVal 5552221
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOC6.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
1355 E/F 3I0>> PICKED UP (EF 3I0>> Pickup) 0 1
PTOC6.Str.general 0 1
device annunciation: 1 - ON IEC Status Str.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.5 Earth fault overcurrent protection in earthed systems (PTOCx)
126 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTOC6.Str.dirGeneral
PTOC6.Op
No. Information
1358 E/F picked up FORWARD (EF forward) x 1100
1359 E/F picked up REVERSE (EF reverse) x 1010
1355 E/F 3I0>> PICKED UP (EF 3I0>> Pickup) 01111
PTOC6.Str.dirGeneral 03120
device annunciati on : 1 - ON IEC Status Str.dirGener al : 0 - UNKNOWN
0 - OFF 1 - FORWARD
2 - BACKWARD
3 - BOTH
No. Information
1367 E/F 3I0>> TRIP (EF 3I0>> TRIP) 0 1
PTOC6.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.5 Earth fault overcurrent protection in earthed systems (PTOCx)
127SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.5.3 Earth fault 3I0 >>> (PTOC7)
PTOC7.Mod
PTOC7.Health
PTOC7.Str
No. Information
1333 Earth fault protection is ACTIVE (E/F ACTIVE) xx01111
1332 Earth fault protection is BLOCKED (E/F BLOCK) xxx0110
1305 >Earth Fault O/C Block 3I0>>> (>EF BLK 3I0>>>) x x x 1010
1331 Earth fault protection is switched OFF (E/F Prot. OFF) 1 x x 0000
Op. mode 3I0>>> (P3110) = Inactive x 1 x 0000
PTOC7.Mod.stVal 5552221
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOC7.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
1354 E/F 3I0>>> PICKED UP (EF 3I0>>>Pickup) 0 1
PTOC7.Str.general 0 1
device annunciation: 1 - ON IEC Status Str.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.5 Earth fault overcurrent protection in earthed systems (PTOCx)
128 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTOC7.Str.dirGeneral
PTOC7.Op
No. Information
1358 E/F picked up FORWARD (EF forward) x 1100
1359 E/F picked up REVERSE (EF reverse) x 1010
1354 E/F 3I0>>> PICKED UP (EF 3I0>>>Pickup) 01111
PTOC7.Str.dirGeneral 03120
device annunciati on : 1 - ON IEC Status Str.dirGener al : 0 - UNKNOWN
0 - OFF 1 - FORWARD
2 - BACKWARD
3 - BOTH
No. Information
1366 E/F 3I0>>> TRIP (EF 3I0>>> TRIP) 0 1
PTOC7.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.5 Earth fault overcurrent protection in earthed systems (PTOCx)
129SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.5.4 Earth fault 3I0p (PTOC8)
PTOC8.Mod
PTOC8.Health
PTOC8.Str
No. Information
1332 Earth fault protection is BLOCKED (E/F BLOCK) xx1100
1309 >Earth Fault O/C Block 3I0p (>EF BLOCK 3I0p) xx1010
1331 Earth fault protection is switched OFF (E/F Prot. OFF) 1 x 0000
Op. mode 3I0p (P3140) = Inactive x 10000
PTOC8.Mod.stVal 552221
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOC8.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
1357 E/F 3I0p PICKED UP (EF 3I0p Pickup) 0 1
PTOC8.Str.general 0 1
device annunciation: 1 - ON IEC Status Str.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.5 Earth fault overcurrent protection in earthed systems (PTOCx)
130 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTOC8.Str.dirGeneral
PTOC8.Op
No. Information
1358 E/F picked up FORWARD (EF forward) x 0110
1359 E/F picked up REVERSE (EF reverse) x 0011
1357 E/F 3I0p PICKED UP (EF 3I0p Pickup) 01111
PTOC8.Str.dirGeneral 00132
device annunciati on : 1 - ON IEC Status Str.dirGener al : 0 - UNKNOWN
0 - OFF 1 - FORWARD
2 - BACKWARD
3 - BOTH
No. Information
1369 E/F 3I0p TRIP (EF 3I0p TRIP) 0 1
PTOC8.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.6 Earth fault detection in non-earthed systems (PSDE1)
131SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.6 Earth fault detection in non-earthed systems (PSDE1)
PSDE1.Mod
PSDE1.Health
PSDE1.Str
No. Information
1263 Sensitve E/F detection is ACTIVE (SensEF ACTIVE) 11110000
1262 Sensitve E/F detection is BLOCKED (SensEF BLOCK) 11001100
1261 Sensitve E/F detection is switched OFF (SensEF OFF) 10101010
PSDE1.Mod.stVal 52515555
device annunciation: 1 - ON IEC Status Mod.stVal: 1 - ON
0 - OFF 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PSDE1.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
1271 Sensitve E/F detection picked up (SensEF Pickup) 0 1
PSDE1.Str.general 0 1
device annunciation: 1 - ON IEC Status Str.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.6 Earth fault detection in non-earthed systems (PSDE1)
132 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PSDE1.Str.dirGeneral
PSDE1.Str.phsA
PSDE1.Str.dirPhsA
No. Information
1276 Sensitve E/F detection Forward (SensEF Forward) 11110000
1277 Sensitve E/F detection Reverse (SensEF Reverse) 11001100
1278 Sensitve E/F detection Undef. Direction (SensEF undefDir) 10101010
PSDE1.Mod.dirGeneral 03010200
device annunciati on : 1 - ON IEC Status Str.dirGener al : 0 - UNKNOWN
0 - OFF 1 - FORWARD
2 - BACKWARD
3 - BOTH
No. Information
1272 Sensitve E/F detection Phase L1 (SensEF Phase L1) 0 1
PSDE1.Str.phsA 0 1
device annunciation: 1 - ON IEC Status Str.phsA: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
1276 Sensitve E/F detection Forward (SensEF Forward) 1111111100000000
1277 Sensitve E/F detection Reverse (SensEF Reverse) 1111000011110000
1278 Sensitve E/F detection Undef. Direction
(SensEF undefDir) 1100110011001100
1272 Sensitve E/F detection Phase L1 (SensEF Phase L1) 1010101010101010
PSDE1.Str.dirPhsA 0000001000200000
device annunciati on : 1 - ON IEC Status Str .d i rP hsA: 0 - UNKNOWN
0 - OFF 1 - FORWARD
2 - BACKWARD
Mapping
3.6 Earth fault detection in non-earthed systems (PSDE1)
133SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PSDE1.Str.phsB
PSDE1.Str.dirPhsB
PSDE1.Str.phsC
No. Information
1273 Sensitve E/F detection Phase L2 (SensEF Phase L2) 0 1
PSDE1.Str.phsB 0 1
device annunciation: 1 - ON IEC Status Str.phsB: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
1276 Sensitve E/F detection Forward (SensEF Forwar d) 1 111111100000000
1277 Sensitve E/F detection Reverse (SensEF Reverse) 1 111000011110000
1278 Sensitve E/F detection Undef. Direction
(SensEF undefDir) 1100110011001100
1273 Sensitve E/F detection Phase L2 (SensEF Phase L2) 1 010101010101010
PSDE1.Str.dirPhsB 0000001000200000
device annunciation: 1 - ON IEC Status Str.dirPhsB: 0 - UNKNOWN
0 - OFF 1 - FORWARD
2 - BACKWARD
No. Information
1274 Sensitve E/F detection Phase L3 (SensEF Phase L3) 0 1
PSDE1.Str.phsC 0 1
device annunciation: 1 - ON IEC Status Str.phsC: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.6 Earth fault detection in non-earthed systems (PSDE1)
134 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PSDE1.Str.dirPhsC
PSDE1.Op
No. Information
1276 Sensitve E/F detection Forward (SensEF Forward) 1111111100000000
1277 Sensitve E/F detection Reverse (SensEF Reverse) 1111000011110000
1278 Sensitve E/F detection Undef. Direction
(SensEF undefDir) 1100110011001100
1274 Sensitve E/F detection Phase L3 (SensEF Phase L3) 1010101010101010
PSDE1.Str.dirPhsC 0000001000200000
device annunciati on : 1 - ON IEC Status Str .d i rP hsC : 0 - UNKNOWN
0 - OFF 1 - FORWARD
t 2 - BACKWARD
No. Information
1281 Sensitve E/F detection TRIP command (SensEF TRIP) 0 1
PSDE1.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.7 Restricted earth fault protection (PDIF3)
135SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.7 Restricted earth fault protection (PDIF3)
PDIF3.Mod
PDIF3.Health
No. Information
5813 Restricted earth fault is ACTIVE (REF ACTIVE) x011111
5812 Restricted earth fault is BLOCKED (REF BLOCKED) x x 0 1 x x x
5811 Restricted earth fault is switched OFF (REF OFF) 1000000
290 Alarm: Broken current-wire detected L1 (Broken Iwire L1) x x 0 0 1 x x
291 Alarm: Broken current-wire detected L2 (Broken Iwire L2) x x 0 0 x 1 x
292 Alarm: Broken current-wire detected L3 (Broken Iwire L3) x x 0 0 x x 1
PDIF3.Mod.stVal 5512222
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PDIF3.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
Mapping
3.7 Restricted earth fault protection (PDIF3)
136 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PDIF3.Str
PDIF3.Str.dirGeneral
PDIF3.Op
PDIF3.DifAClc
PDIF3.RstA
No. Information
5817 Restr. earth flt.: picked up (REF picked up) 0 1
PDIF3.Str.general 0 1
device annunciati on : 1 - ON IEC Status Str.gene ra l : 0 - FALSE
0 - OFF 1 - TRUE
No. Information
PDIF3.Str.dirGeneral 1
device annunciati on : 1 - ON IEC Status Str.dirGener al : 0 - UNKNOWN
0 - OFF 1 - FORWARD
x - irrelevant 2 - BACKWARD
3 - BOTH
No. Information
5821 Restr. earth flt.: TRIP (REF TRIP) 0 1
PDIF3.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
No. Information Value
30654 Idiff REF(% Operational
nominal current) (IdiffREF=) PDIF3.DifAClc.cVal.mag.f Measured value Absolute value
PDIF3.DifAClc.units.SIUnit
PDIF3.DifAClc.units.multiplier
No. Information Value
30655 Irest REF(% Operational
nominal current) (IrestREF=) PDIF3.RstA.cVal.mag.f Measured value Absolute value
PDIF3.RstA.units.SIUnit
PDIF3.RstA.units.multiplier
Mapping
3.8 Overcurrent protection (PTOCx)
137SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.8 Overcurrent protection (PTOCx)
3.8.1 O/C Ip (PTOC1)
PTOC1.Mod
PTOC1.Health
PTOC1.Str
No. Information
7153 Backup O/C is ACTIVE (O/C ACTIVE) x x 0001111
7152 Backup O/C is BLOCKED (O/C BLOCK) x x 0110011
7106 >BLOCK Backup OverCurrent Ip (>BLOCK O/C Ip) x x 1010101
7151 Backup O/C is switched OFF (O/C OFF) 1 x 0000000
Operating Mode (P2601) = OFF or Ip (P2640) and 3I0p PICKUP (P2650) = ∞x10000000
PTOC1.Mod.stVal 552221222
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOC1.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
7193 Backup O/C Pickup Ip (O/C PICKUP Ip) 0 1
PTOC1.Str.general 0 1
device annunciation: 1 - ON IEC Status Str.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.8 Overcurrent protection (PTOCx)
138 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTOC1.Op
3.8.2 O/C I> (PTOC2)
PTOC2.Mod
PTOC2.Health
No. Information
7223 Backup O/C TRIP Ip (O/C TRIP Ip) 0 1
PTOC1.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
7153 Backup O/C is ACTIVE (O/C ACTIVE) x x 0001111
7152 Backup O/C is BLOCKED (O/C BLOCK) x x 0110011
7105 >BLOCK Backup OverCurrent I> (>BLOCK O/C I>) x x 1010101
7151 Backup O/C is switched OFF (O/C OFF) 1 x 0000000
Operating Mode (P2601) = OFF or Iph> (P2620) and 3I0> (P2622) = ∞x10000000
PTOC2.Mod.stVal 552221222
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOC2.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
Mapping
3.8 Overcurrent protection (PTOCx)
139SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTOC2.Str
PTOC2.Op
3.8.3 O/C I>> (PTOC3)
PTOC3.Mod
No. Information
7192 Backup O/C Pickup I> (O/C PICKUP I>) 0 1
PTOC2.Str.general 0 1
device annunciation: 1 - ON IEC Status Str.general: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
7222 Backup O/C TRIP I> (O/C TRIP I>) 0 1
PTOC2.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
7153 Backup O/C is ACTIVE (O/C ACTIVE) x x 0001111
7152 Backup O/C is BLOCKED (O/C BLOCK) x x 0110011
7104 >BLOCK Backup OverCurrent I>> (>BLOCK O/C I>>) x x 1010101
7151 Backup O/C is switched OFF (O/C OFF) 1 x 0000000
Operating Mode (P2601) = OFF or
Iph>> (P2610) and 3I0>> PICKUP (P2612) = ∞
x10000000
PTOC3.Mod.stVal 552221222
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
Mapping
3.8 Overcurrent protection (PTOCx)
140 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTOC3.Health
PTOC3.Str
PTOC3.Op
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOC3.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
7191 Backup O/C Pickup I>> (O/C PICKUP I>>) 0 1
PTOC3.Str.general 0 1
device annunciati on : 1 - ON IEC Status Str.gene ral: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
7221 Backup O/C TRIP I>> (O/C TRIP I>>) 0 1
PTOC3.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.8 Overcurrent protection (PTOCx)
141SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.8.4 O/C I>>> (PTOC4)
PTOC4.Mod
PTOC4.Health
No. Information
7153 Backup O/C is ACTIVE (O/C ACTIVE) x x 00000011111111
7152 Backup O/C is BLOCKED (O/C BLOCK) x x 00111100001111
7130 >BLOCK I-STUB (>BLOCK I-STUB) x x 11001100110011
7131 >Enable I-STUB-Bus function (>I-STUB ENABLE) x x 01010101010101
7151 Backup O/C is switched OFF (O/C OFF) 1 x 00000000000000
Operating Mode (P2601) = OFF or
Iph>>> (P2630) and 3I0>>> PICKUP (P2632) = ∞
x100000000000000
PTOC4.Mod.stVal 5522222221222222
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOC4.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
Mapping
3.8 Overcurrent protection (PTOCx)
142 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTOC4.Str
PTOC4.Op
No. Information
7201 O/C I-STUB Pickup (I-STUB PICKUP) 0 1
PTOC4.Str.general 0 1
device annunciati on : 1 - ON IEC Status Str.gene ral: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
7235 O/C I-STUB TRIP (I-STUB TRIP) 0 1
PTOC4.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.8 Overcurrent protection (PTOCx)
143SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.8.5 Directional O/C Ip (PTOC9)
PTOC9.Mod
PTOC9.Health
No. Information
7153 Backup O/C is ACTIVE (O/C ACTIVE) xx0011
7152 Backup O/C is BLOCKED (O/C BLOCK) xx0101
7151 Backup O/C is switched OFF (O/C OFF) x 10000
7159 Operating Mode (P2601) = OFF or
Ip ger (P2689) and 3I0 ger PICKUP (P2694) = ∞
1x0000
PTOC9.Mod.stVal 555212
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOC9.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
Mapping
3.8 Overcurrent protection (PTOCx)
144 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTOC9.Str
PTOC9.Str.dirGeneral
PTOC9.Op
No. Information
7203 Backup O/C Pickup Ip directional (O/C PICK. IpDir) 0 1
PTOC9.Str.general 0 1
device annunciati on : 1 - ON IEC Status Str.gene ra l : 0 - FALSE
0 - OFF 1 - TRUE
No. Information
7203 Backup O/C Pickup Ip directional (O/C PICK. IpDir) 01111
7248 Backup O/C forward direction (O/C Dir.forward) x 0011
7249 Backup O/C reverse direction (O/C Dir.reverse) x 0101
PTOC9.Str.dirGeneral 00213
device annunciati on : 1 - ON IEC Status Str.dirGener al : 0 - UNKNOWN
0 - OFF 1 - FORWARD
x - irrelevant 2 - BACKWARD
3 - BOTH
No. Information
7237 Backup O/C Pickup Ip directional (O/C TRIP IpDir.) 0 1
PTOC9.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.8 Overcurrent protection (PTOCx)
145SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.8.6 Directional O/C I> (PTOC10)
PTOC10.Mod
PTOC10.Health
No. Information
7153 Backup O/C is ACTIVE (O/C ACTIVE) xx0011
7152 Backup O/C is BLOCKED (O/C BLOCK) xx0101
7151 Backup O/C is switched OFF (O/C OFF) x 10000
7158 Operating Mode (P2601) = OFF or
Iph> ger (P2630) and 3I0> ger PICKUP (P2632) = ∞
1x0000
PTOC10.Mod.stVal 555212
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOC10.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
Mapping
3.8 Overcurrent protection (PTOCx)
146 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTOC10.Str
PTOC10.Str.dirGeneral
PTOC10.Op
No. Information
7202 Backup O/C Pickup I> directional (O/C PICK. I>Dir ) 0 1
PTOC10.Str.general 0 1
device annunciati on : 1 - ON IEC Status Str.gene ra l : 0 - FALSE
0 - OFF 1 - TRUE
No. Information
7202 Backup O/C Pickup I> directional (O/C PICK. I>Dir ) 01111
7248 Backup O/C forward direction (O/C Dir.forward) x 0011
7249 Backup O/C reverse direction (O/C Dir.reverse) x 0101
PTOC10.Str.dirGeneral 00213
device annunciati on : 1 - ON IEC Status Str.dirGener al : 0 - UNKNOWN
0 - OFF 1 - FORWARD
x - irrelevant 2 - BACKWARD
3 - BOTH
No. Information
7236 Backup O/C TRIP I> directional (O/C TRIP I>Dir.) 0 1
PTOC10.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.9 Automatic reclosure function (RREC1)
147SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.9 Automatic reclosure function (RREC1)
RREC1.Mod
RREC1.Health
No. Information
2782 AR: Auto-reclose is switched on (AR on) x 0 1 1
2783 AR: Auto-reclose is blocked (AR is blocked) x x 1 0
2781 AR: Auto-reclose is switched off (AR off) 1000
RREC1.Mod.stVal 5521
device annunciation: 1 - ON IEC Status Mod.stVal: 1 - ON
0 - OFF 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
RREC1.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
Mapping
3.9 Automatic reclosure function (RREC1)
148 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
RREC1.Op
RREC1.AutoRecSt
No. Information
2851 AR: Close command (AR CLOSE Cmd.) 0 1
RREC1.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
2801 AR in progress (AR in progress) 1100
2862 AR successful (AR successful) 1010
RREC1.AutoRecSt.stVal 3231
device annunciation : 1 - ON IEC Status AutoRecST.stVal: 1 - READY
0 - OFF 2 - IN PROGRESS
3 - SUCCESSFUL
Mapping
3.10 Synchronism and voltage check (RSYN1)
149SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.10 Synchronism and voltage check (RSYN1)
RSYN1.Mod
RSYN1.Health
RSYN1.Rel
No. Information
2932 Synchro-check is BLOCKED (Sync. BLOCK) 1100
2931 Synchro-check is switched OFF (Sync. OFF) 1010
RSYN1.Mod.stVal 5251
device annunciation: 1 - ON IEC Status Mod.stVal: 1 - ON
0 - OFF 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
RSYN1.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
2951 Synchronism release (to ext. AR) (Sync. release) 0 1
RSYN1.Rel.stVal 0 1
device annunciation: 1 - ON IEC Sta tus Rel.stVal: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.10 Synchronism and voltage check (RSYN1)
150 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
RSYN1.VInd
RSYN1.AngInd
RSYN1.HzInd
RSYN1.SynPrg
No. Information
2947 Sync. Voltage diff. greater than limit (Sync. Udiff>) 0 1
RSYN1.VInd.stVal 1 0
device annunciation: 1 - ON IEC Status VInd.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
2949 Sync. Angle diff. greater than limit (Sync. ϕ-diff>) 0 1
RSYN1.AngInd.stVal 1 0
device annunciation: 1 - ON IEC Status AngInd.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
2948 Sync. Freq. diff. greater than limit (Sync. fdiff>) 0 1
RSYN1.HzInd.stVal 1 0
device annunciation: 1 - ON IEC Status HzInd.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
2941 Synchronization is running (Sync. running) 0 1
RSYN1.SynPrg.stVal 0 1
device annunciation: 1 - ON IEC Status SynPrg.stVal: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.10 Synchronism and voltage check (RSYN1)
151SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
RSYN1.DifVCIc
RSYN1.DifHzCIc
RSYN1.DifAngCIc
No. Information Value
636 U-diff (line-bus) (Udiff =) RSYN1.DifVClc.mag.f Measured value Absolute value
RSYN1.DifVClc.units.SIUnit 29 V (Volt)
RSYN1.DifVClc.units.multiplier 3 Kilo
No. Information Value
647 Frequency (difference line-bus) (F-diff=) RSYN1.DifHzClc.mag.f Measured value Absolute value
RSYN1.DifHzClc.units.SIUnit 33 Hz
RSYN1.DifHzClc.units.multiplier 0 1
No. Information Value
648 Angle (difference line-bus) (ϕ-diff=) RSYN1.DifAngClc.mag.f Measured value Absolute value
RSYN1.DifAngClc.units.SIUnit 9 ° (Degree)
RSYN1.DifAngClc.units.multiplier 0 1
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
152 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.11 Under and overvoltage protection (PTUVx, PT OVx)
3.11.1 Under voltage protection Uph-e < (PTUV1)
PTUV1.Mod
PTUV1.Health
PTUV1.Str
No. Information
10226 Uph-e<(<) Undervolt. is BLOCKED (Uph-e<(<) BLK) 0 0 1
Uph-e<(<) (P3751) = OFF or Uph-e< (P3752) = 0 0 1 0
PTUV1.Mod.stVal 1 5 2
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTUV1.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
10310 Uph-e< Pickup (Uph-e< Pickup) 01111
10318 Uph-e< Pickup L1 (Uph-e< PU L1) 0 x 1 x x
10319 Uph-e< Pickup L2 (Uph-e< PU L2) 0 x x 1 x
10320 Uph-e< Pickup L3 (Uph-e< PU L3) 0 x x x 1
PTUV1.Str.general 01111
device annunciati on : 1 - ON IEC Status Str.gene ral: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
153SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTUV1.Str.phsA
PTUV1.Str.phsB
PTUV1.Str.phsC
PTUV1.Op
No. Information
10318 Uph-e< Pickup L1 (Uph-e< PU L1) 0 1
PTUV1.Str.phsA 0 1
device annunciation: 1 - ON IEC Status Str.phsA: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10319 Uph-e< Pickup L2 (Uph-e< PU L2) 0 1
PTUV1.Str.phsB 0 1
device annunciation: 1 - ON IEC Status Str.phsB: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10320 Uph-e< Pickup L3 (Uph-e< PU L3) 0 1
PTUV1.Str.phsC 0 1
device annunciation: 1 - ON IEC Status Str.phsC: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10317 Uph-e<(<) TRIP command (Uph-e<(<) TRIP) 0011
10315 Uph-e< TimeOut (Uph-e< TimeOut) 0101
PTUV1.Op.general 0001
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
154 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.11.2 Undervoltage protection Uph-e<< (PTUV2)
PTUV2.Mod
PTUV2.Health
PTUV2.Str
No. Information
10226 Uph-e<(<) Undervolt. is BLOCKED (Uph-e<(<) BLK) 0 0 1
Uph-e<(<) (P3751) = OFF or Uph-e<< (P3754) = 0 0 1 0
PTUV2.Mod.stVal 1 5 2
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTUV2.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
10311 Uph-e<< Pickup (Uph-e<< Pickup) 01111
10321 Uph-e<< Pickup L1 (Uph-e<< PU L1) 0 x 1 x x
10322 Uph-e<< Pickup L2 (Uph-e<< PU L2) 0 x x 1 x
10323 Uph-e<< Pickup L3 (Uph-e<< PU L3) 0 x x x 1
PTUV2.Str.general 01111
device annunciati on : 1 - ON IEC Status Str.gene ral: 0 - FALSE
0 - OFF 1 - TRUE
X - irrelevant
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
155SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTUV2.Str.phsA
PTUV2.Str.phsB
PTUV2.Str.phsC
PTUV2.Op
No. Information
10321 Uph-e<< Pickup L1 (Uph-e<< PU L1) 0 1
PTUV2.Str.phsA 0 1
device annunciation: 1 - ON IEC Status Str.phsA: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10322 Uph-e<< Pickup L2 (Uph-e<< PU L2) 0 1
PTUV2.Str.phsB 0 1
device annunciation: 1 - ON IEC Status Str.phsB: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10323 Uph-e<< Pickup L3 (Uph-e<< PU L3) 0 1
PTUV2.Str.phsC 0 1
device annunciation: 1 - ON IEC Status Str.phsC: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10317 Uph-e<(<) TRIP command (Uph-e<(<) TRIP) 0011
10316 Uph-e<< TimeOut (Uph-e<< TimeOut) 0101
PTUV2.Op.general 0001
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
156 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.11.3 Undervoltage protection Uphph< (PTUV3)
PTUV3.Mod
PTUV3.Health
PTUV3.Str
No. Information
10228 Uphph<(<) Undervolt. is BLOCKED (Uph-ph<(<) BLK) 0 0 1
Uph-ph<(<) (P3761) = OFF or Uph-ph< (P3762) = 0 0 1 0
PTUV3.Mod.stVal 1 5 2
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTUV3.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
10325 Uph-ph< Pickup (Uph-ph< Pickup) 01111
10327 Uphph<(<) Pickup L1-L2 (Uphph<(<)PU L12) 0 x 1 x x
10328 Uphph<(<) Pickup L2-L3 (Uphph<(<)PU L23) 0 x x 1 x
10329 Uphph<(<) Pickup L3-L1 (Uphph<(<)PU L31) 0 x x x 1
PTUV3.Str.general 01111
device annunciati on : 1 - ON IEC Status Str.gene ral: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
157SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTUV3.Str.phsA
PTUV3.Str.phsB
PTUV3.Str.phsC
PTUV3.Op
No. Information
10327 Uphph<(<) Pickup L1-L2 (Uphph<(<)PU L12) 0011
10329 Uphph<(<) Pickup L3-L1 (Uphph<(<)PU L31) 0101
PTUV3.Str.phsA 0111
device annunciation: 1 - ON IEC Status Str.phsA: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10327 Uphph<(<) Pickup L1-L2 (Uphph<(<)PU L12) 0011
10328 Uphph<(<) Pickup L2-L3 (Uphph<(<)PU L23) 0101
PTUV3.Str.phsB 0111
device annunciation: 1 - ON IEC Status Str.phsB: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10328 Uphph<(<) Pickup L2-L3 (Uphph<(<)PU L23) 0011
10329 Uphph<(<) Pickup L3-L1 (Uphph<(<)PU L31) 0101
PTUV3.Str.phsC 0111
device annunciation: 1 - ON IEC Status Str.phsC: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10332 Uphph<(<) TRIP command (Uphph<(<) TRIP) 0011
10330 Uphph< TimeOut (Uphph< TimeOut) 0101
PTUV3.Op.general 0001
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
158 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.11.4 Undervoltage protection Uphph<< (PTUV4)
PTUV4.Mod
PTUV4.Health
PTUV4.Str
No. Information
10228 Uphph<(<) Undervolt. is BLOCKED (Uph-ph<(<) BLK) 0 0 1
Uph-ph<(<) (P3761) = OFF or Uph-ph<< (P3764) = 0 0 1 0
PTUV4.Mod.stVal 1 5 2
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTUV4.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
10326 Uph-ph<< Pickup (Uph-ph<< Pickup) 01111
10327 Uphph<(<) Pickup L1-L2 (Uphph<(<)PU L12) 0 x 1 x x
10328 Uphph<(<) Pickup L2-L3 (Uphph<(<)PU L23) 0 x x 1 x
10329 Uphph<(<) Pickup L3-L1 (Uphph<(<)PU L31) 0 x x x 1
PTUV4.Str.general 01111
device annunciati on : 1 - ON IEC Status Str.gene ral: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
159SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTUV4.Str.phsA
PTUV4.Str.phsB
PTUV4.Str.phsC
PTUV4.Op
No. Information
10327 Uphph<(<) Pickup L1-L2 (Uphph<(<)PU L12) 0011
10329 Uphph<(<) Pickup L3-L1 (Uphph<(<)PU L31) 0101
PTUV4.Str.phsA 0111
device annunciation: 1 - ON IEC Status Str.phsA: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10327 Uphph<(<) Pickup L1-L2 (Uphph<(<)PU L12) 0011
10328 Uphph<(<) Pickup L2-L3 (Uphph<(<)PU L23) 0101
PTUV4.Str.phsB 0111
device annunciation: 1 - ON IEC Status Str.phsB: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10328 Uphph<(<) Pickup L2-L3 (Uphph<(<)PU L23) 0011
10329 Uphph<(<) Pickup L3-L1 (Uphph<(<)PU L31) 0101
PTUV4.Str.phsC 0111
device annunciation: 1 - ON IEC Status Str.phsC: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10332 Uphph<(<) TRIP command (Uphph<(<) TRIP) 0011
10331 Uphph<< TimeOut (Uphph<< TimeOut) 0101
PTUV4.Op.general 0001
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
160 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.11.5 Undervoltage protection U1< (PTUV5)
PTUV5.Mod
PTUV5.Health
PTUV5.Str
PTUV5.Op
No. Information
10230 U1<(<) Undervolt. is BLOCKED (U1<(<) BLK) 0 0 1
U1<(<) (P3771) = OFF or U1< (P3772) = 0 0 1 0
PTUV5.Mod.stVal 1 5 2
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTUV5.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
10300 U1< Pickup (U1< Pickup) 0 1
PTUV5.Str.general 0 1
device annunciati on : 1 - ON IEC Status Str.gene ral: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10304 U1<(<) TRIP command (U1<(<) TRIP) 0011
10302 U1< TimeOut (U1< TimeOut) 0101
PTUV5.Op.general 0001
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
161SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.11.6 Undervoltage protection U1<< (PTUV6)
PTUV6.Mod
PTUV6.Health
PTUV6.Str
PTUV6.Op
No. Information
10230 U1<(<) Undervolt. is BLOCKED (U1<(<) BLK) 0 0 1
U1<(<) (P3771) = OFF or U1<< (P3774) = 0 0 1 0
PTUV6.Mod.stVal 1 5 2
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTUV6.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
10301 U1<< Pickup (U1<< Pickup) 0 1
PTUV6.Str.general 0 1
device annunciation: 1 - ON IEC Status Str.general: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10304 U1<(<) TRIP command (U1<(<) TRIP) 0011
10303 U1<< TimeOut (U1<< TimeOut) 0101
PTUV6.Op.general 0001
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
162 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.11.7 Overvoltage protection Uph> (PTOV1)
PTOV1.Mod
PTOV1.Health
PTOV1.Str
No. Information
10216 Uph-e>(>) Overvolt. is BLOCKED (Uph-e>(>) BLK) 0 0 1
Uph-e>(>) (P3701) = OFF or Uph-e> (P3702) = ∞010
PTOV1.Mod.stVal 1 5 2
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOV1.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
10240 Uph-e> Pickup (Uph-e> Pickup) 01111
10248 Uph-e> Pickup L1 (Uph-e> PU L1) 0 x 1 x x
10249 Uph-e> Pickup L2 (Uph-e> PU L2) 0 x x 1 x
10250 Uph-e> Pickup L3 (Uph-e> PU L3) 0 x x x 1
PTOV1.Str.general 01111
device annunciati on : 1 - ON IEC Status Str.gene ral: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
163SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTOV1.Str.phsA
PTOV1.Str.phsB
PTOV1.Str.phsC
PTOV1.Op
No. Information
10248 Uph-e> Pickup L1 (Uph-e> PU L1) 0 1
PTOV1.Str.phsA 0 1
device annunciation: 1 - ON IEC Status Str.phsA: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10249 Uph-e> Pickup L2 (Uph-e> PU L2) 0 1
PTOV1.Str.phsB 0 1
device annunciation: 1 - ON IEC Status Str.phsB: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10250 Uph-e> Pickup L3 (Uph-e> PU L3) 0 1
PTOV1.Str.phsC 0 1
device annunciation: 1 - ON IEC Status Str.phsC: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
Spannungsschutz.Uphgr_AUS 0011
10245 Uph-e> TimeOut (Uph-e> TimeOut) 0101
PTOV1.Op.general 0001
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
164 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.11.8 Overvoltage protection Uph-e>> (PTOV2)
PTOV2.Mod
PTOV2.Health
PTOV2.Str
No. Information
10216 Uph-e>(>) Overvolt. is BLOCKED (Uph-e>(>) BLK) 0 0 1
Uph-e>(>) (P3701) = OFF or Uph-e>> (P3704) = ∞010
PTOV2.Mod.stVal 1 5 2
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOV2.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
10241 Uph-e>> Pickup (Uph-e>> Pickup) 01111
10242 Uph-e>(>) Pickup L1 (Uph-e>(>) PU L1) 0 x 1 x x
10243 Uph-e>(>) Pickup L2 (Uph-e>(>) PU L2) 0 x x 1 x
10244 Uph-e>(>) Pickup L3 (Uph-e>(>) PU L3) 0 x x x 1
PTOV2.Str.general 01111
device annunciati on : 1 - ON IEC Status Str.gene ral: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
165SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTOV2.Str.phsA
PTOV2.Str.phsB
PTOV2.Str.phsC
PTOV2.Op
No. Information
10242 Uph-e>(>) Pickup L1 (Uph-e>(>) PU L1) 0 1
PTOV2.Str.phsA 0 1
device annunciation: 1 - ON IEC Status Str.phsA: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10243 Uph-e>(>) Pickup L2 (Uph-e>(>) PU L2) 0 1
PTOV2.Str.phsB 0 1
device annunciation: 1 - ON IEC Status Str.phsB: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10244 Uph-e>(>) Pickup L3 (Uph-e>(>) PU L3) 0 1
PTOV2.Str.phsC 0 1
device annunciation: 1 - ON IEC Status Str.phsC: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10247 Uph-e>(>) TRIP command (Uph-e>(>) TRIP) 0011
10246 Uph-e>> TimeOut (Uph-e>> TimeOut) 0101
PTOV2.Op.general 0001
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
166 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.11.9 Overvoltage protection Uphph> (PTOV3)
PTOV3.Mod
PTOV3.Health
PTOV3.Str
No. Information
10218 Uph-ph>(>) Overvolt. is BLOCKED (Uph-ph>(>) BLK) 0 0 1
Uph-ph>(>) (P3711) = OFF or Uph-ph> (P3712) = ∞010
PTOV3.Mod.stVal 1 5 2
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOV3.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
10255 Uph-ph> Pickup (Uphph> Pickup) 01111
10257 Uph-ph>(>) Pickup L1-L2 (Uphph>(>)PU L12) 0 x 1 x x
10258 Uph-ph>(>) Pickup L2-L3 (Uphph>(>)PU L23) 0 x x 1 x
10259 Uph-ph>(>) Pickup L3-L1 (Uphph>(>)PU L31) 0 x x x 1
PTOV3.Str.general 01111
device annunciati on : 1 - ON IEC Status Str.gene ral: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
167SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTOV3.Str.phsA
PTOV3.Str.phsB
PTOV3.Str.phsC
PTOV3.Op
No. Information
10257 Uph-ph>(>) Pickup L1-L2 (U phph>(>)PU L12) 0011
10259 Uph-ph>(>) Pickup L3-L1 (U phph>(>)PU L31) 0101
PTOV3.Str.phsA 0111
device annunciation: 1 - ON IEC Status Str.phsA: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10257 Uph-ph>(>) Pickup L1-L2 (U phph>(>)PU L12) 0011
10258 Uph-ph>(>) Pickup L2-L3 (U phph>(>)PU L23) 0101
PTOV3.Str.phsB 0111
device annunciation: 1 - ON IEC Status Str.phsB: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10258 Uph-ph>(>) Pickup L2-L3 (U phph>(>)PU L23) 0011
10259 Uph-ph>(>) Pickup L3-L1 (U phph>(>)PU L31) 0101
PTOV3.Str.phsC 0111
device annunciation: 1 - ON IEC Status Str.phsC: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10262 Uph-ph>(>) TRIP command (Uphph>(>) TRIP) 0011
10260 Uph-ph> TimeOut (Uphph> TimeOut) 0101
PTOV3.Op.general 0001
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
168 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.11.10 Overvoltage protection Uphph>> (PTOV4)
PTOV4.Mod
PTOV4.Health
PTOV4.Str
No. Information
10218 Uph-ph>(>) Overvolt. is BLOCKED (Uph-ph>(>) BLK) 0 0 1
Uph-ph>(>) (P3711) = OFF or Uph-ph>> (P3714) = ∞010
PTOV4.Mod.stVal 1 5 2
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOV4.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
10256 Uph-ph>> Pickup (Uphph>> Pickup) 01111
10266 Uph-ph>> Pickup L1-L2 (Uphph>> PU L12) 0 x 1 x x
10267 Uph-ph>> Pickup L2-L3 (Uphph>> PU L23) 0 x x 1 x
10268 Uph-ph>> Pickup L3-L1 (Uphph>> PU L31) 0 x x x 1
PTOV4.Str.general 01111
device annunciati on : 1 - ON IEC Status Str.gene ral: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
169SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTOV4.Str.phsA
PTOV4.Str.phsB
PTOV4.Str.phsC
PTOV4.Op
No. Information
10266 Uph-ph>> Pickup L1-L2 (Uphph>> PU L12) 0011
10268 Uph-ph>> Pickup L3-L1 (Uphph>> PU L31) 0101
PTOV4.Str.phsA 0111
device annunciation: 1 - ON IEC Status Str.phsA: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10266 Uph-ph>> Pickup L1-L2 (Uphph>> PU L12) 0011
10267 Uph-ph>> Pickup L2-L3 (Uphph>> PU L23) 0101
PTOV4.Str.phsB 0111
device annunciation: 1 - ON IEC Status Str.phsB: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10267 Uph-ph>> Pickup L2-L3 (Uphph>> PU L23) 0011
10268 Uph-ph>> Pickup L3-L1 (Uphph>> PU L31) 0101
PTOV4.Str.phsC 0111
device annunciation: 1 - ON IEC Status Str.phsC: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10262 Uph-ph>(>) TRIP command (Uphph>(>) TRIP) 0011
10261 Uph-ph>> TimeOut (Uphph>> TimeOut) 0101
PTOV4.Op.general 0001
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
170 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.11.11 Overvoltage protection 3U0> (PTOV5)
PTOV5.Mod
PTOV5.Health
PTOV5.Str
PTOV5.Op
No. Information
10220 3U0>(>) Overvolt. is BLOCKED (3U0>(>) BLK) 0 0 1
3U0>(>) (or Ux) (P3721) = OFF or 3U0> (P3722) = ∞010
PTOV5.Mod.stVal 1 5 2
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOV5.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
10270 3U0> Pickup (3U0> Pickup) 0 1
PTOV5.Str.general 0 1
device annunciati on : 1 - ON IEC Status Str.gene ral: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10274 3U0>(>) TRIP command (3U0>(>) TRIP) 0011
10272 3U0> TimeOut (3U0> TimeOut) 0101
PTOV5.Op.general 0001
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
171SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.11.12 Overvoltage protection 3U0>> (PTOV6)
PTOV6.Mod
PTOV6.Health
PTOV6.Str
PTOV6.Op
No. Information
10220 3U0>(>) Overvolt. is BLOCKED (3U0>(>) BLK) 0 0 1
3U0>(>) (or Ux) (P3721) = OFF or 3U0>> (P3724) = ∞010
PTOV6.Mod.stVal 1 5 2
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOV6.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
10271 3U0>> Pickup (3U0>> Pickup) 0 1
PTOV6.Str.general 0 1
device annunciation: 1 - ON IEC Status Str.general: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10274 3U0>(>) TRIP command (3U0>(>) TRIP) 0011
10273 3U0>> TimeOut (3U0>> TimeOut) 0101
PTOV6.Op.general 0001
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
172 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.11.13 Overvoltage protection U1> (PTOV7)
PTOV7.Mod
PTOV7.Health
PTOV7.Str
PTOV7.Op
No. Information
10222 U1>(>) Overvolt. is BLOCKED (U1>(>) BLK) 0 0 1
U1>(>) (P3731) = OFF or U1> (P3732) = ∞010
PTOV7.Mod.stVal 1 5 2
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOV7.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
10280 U1> Pickup (U1> Pickup) 0 1
PTOV7.Str.general 0 1
device annunciati on : 1 - ON IEC Status Str.gene ral: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10284 U1>(>) TRIP command (U1>(>) TRIP) 0011
10282 U1> TimeOut (U1> TimeOut) 0101
PTOV7.Op.general 0001
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
173SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.11.14 Overvoltage protection U1>> (PTOV8)
PTOV8.Mod
PTOV8.Health
PTOV8.Str
PTOV8.Op
No. Information
10222 U1>(>) Overvolt. is BLOCKED (U1>(>) BLK) 0 0 1
U1>(>) (P3731) = OFF or U1>> (P3734) = ∞010
PTOV8.Mod.stVal 1 5 2
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOV8.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
10281 U1>> Pickup (U1>> Pickup) 0 1
PTOV8.Str.general 0 1
device annunciation: 1 - ON IEC Status Str.general: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10284 U1>(>) TRIP command (U1>(>) TRIP) 0011
10283 U1>> TimeOut (U1>> TimeOut) 0101
PTOV8.Op.general 0001
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
174 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.11.15 Overvoltage protection U2> (PTOV9)
PTOV9.Mod
PTOV9.Health
PTOV9.Str
PTOV9.Op
No. Information
10224 U2>(>) Overvolt. is BLOCKED (U2>(>) BLK) 0 0 1
U2>(>) (P3741) = OFF or U2> (P3742) = ∞010
PTOV9.Mod.stVal 1 5 2
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOV9.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
10290 U2> Pickup (U2> Pickup) 0 1
PTOV9.Str.general 0 1
device annunciati on : 1 - ON IEC Status Str.gene ral: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10294 U2>(>) TRIP command (U2>(>) TRIP) 0011
10292 U2> TimeOut (U2> TimeOut) 0101
PTOV9.Op.general 0001
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.11 Under and overvoltage protection (PTUVx, PTOVx)
175SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.11.16 Overvoltage protection U2>> (PTOV10)
PTOV10.Mod
PTOV10.Health
PTOV10.Str
PTOV10.Op
No. Information
10224 U2>(>) Overvolt. is BLOCKED (U2>(>) BLK) 0 0 1
U2>(>) (P3741) = OFF or U2>> (P3742) = ∞010
PTOV10.Mod.stVal 1 5 2
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOV10.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
10291 U2>> Pickup (U2>> Pickup) 0 1
PTOV10.Str.general 0 1
device annunciation: 1 - ON IEC Status Str.general: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
10294 U2>(>) TRIP command (U2>(>) TRIP) 0011
10293 U2>> TimeOut (U2>> TimeOut) 0101
PTOV10.Op.general 0001
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.12 Frequency protection (PTUFx, PTOFx)
176 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.12 Frequency protection (PTUFx, PTOFx)
3.12.1 Underfrequency protection FQS stage f1 (PTUF1)
PTUF1.Mod
PTUF1.Health
No. Information
5212 Frequency protection is BLOCKED (Freq. BLOCKED) x x 0 1 x x
5206 >BLOCK frequency protection stage f1 (>BLOCK f1) x x 0 x 1 x
5215 Frequency protection undervoltage Blk (Freq UnderV Blk) x x 0 x x 1
O/U FREQ. f1 (P3601) = ON and f1 PICKUP (P3602/3603) < Rated Frequency (P230) x 01111
O/U FREQ. f1 (P3601) =OFF or f1 PICKUP (P3602/3603) = Rated Frequency (P230) 100000
PTUF1.Mod.stVal 551222
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTUF1.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
Mapping
3.12 Frequency protection (PTUFx, PTOFx)
177SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTUF1.Str
PTUF1.Op
No. Information
5232 Frequency protection: f1 picked up (f1 picked up) 0011
O/U FREQ. f1 P3601) = ON and f1 PICKUP (P3602/3603) < Rated Frequency (P230) 0101
PTUF1.Str.general 0001
device annunciation / setting: 1 - ON / TRUE IEC Status Str.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
5236 Frequency protection: f1 TRIP (f1 TRIP) 0011
O/U FREQ. f1 P3601) = ON and f1 PICKUP (P3602/3603) < Rated Frequency (P230) 0101
PTUF1.Op.general 0001
device annunciation / setting: 1 - ON / TRUE IEC Status Op.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
Mapping
3.12 Frequency protection (PTUFx, PTOFx)
178 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.12.2 Underfrequency protection FQS stage f2 (PTUF2)
PTUF2.Mod
PTUF2.Health
No. Information
5212 Frequency protection is BLOCKED (Freq. BLOCKED) x x 0 1 x x
5207 >BLOCK frequency protection stage f2 (>BLOCK f2) x x 0 x 1 x
5215 Frequency protection undervoltage Blk (Freq UnderV Blk) x x 0 x x 1
O/U FREQ. f2 (P3611) = ON and f2 PICKUP (P3612/3613) < Rated Frequency (P230) x 01111
O/U FREQ. f2 (P3611) = OFF or f2 PICKUP (P361 2/3613) = Rated Frequency (P230) 100000
PTUF2.Mod.stVal 551222
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTUF2.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
Mapping
3.12 Frequency protection (PTUFx, PTOFx)
179SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTUF2.Str
PTUF2.Op
No. Information
5233 Frequency protection: f2 picked up (f2 picked up) 0011
O/U FREQ. f2 (P3611) = ON and f2 PICKUP (P3612/3613) < Rated Frequency (P230) 0101
PTUF2.Str.general 0001
device annunciation / setting: 1 - ON / TRUE IEC Status Str.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
5237 Frequency protection: f2 TRIP (f2 TRIP) 0011
O/U FREQ. f2 (P3611)= ON and f2 PICKUP (P3612/3613) < Rated Frequency (P230) 0101
PTUF2.Op.general 0001
device annunciation / setting: 1 - ON / TRUE IEC Status Op.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
Mapping
3.12 Frequency protection (PTUFx, PTOFx)
180 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.12.3 Underfrequency protection FQS stage f3 (PTUF3)
PTUF3.Mod
PTUF3.Health
No. Information
5212 Frequency protection is BLOCKED (Freq. BLOCKED) x x 0 1 x x
5208 >BLOCK frequency protection stage f3 (>BLOCK f3) x x 0 x 1 x
5215 Frequency protection undervoltage Blk (Freq UnderV Blk) x x 0 x x 1
O/U FREQ. f3 (P3621) = ON and f3 PICKUP (P3622/3623) < Rated Frequency (P230) x 01111
O/U FREQ. f3 (P3621) = OFF or f3PICKUP (P3622/3623) = Rated Frequency (P230) 100000
PTUF3.Mod.stVal 551222
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTUF3.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
Mapping
3.12 Frequency protection (PTUFx, PTOFx)
181SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTUF3.Str
PTUF3.Op
No. Information
5234 Frequency protection: f3 picked up (f3 picked up) 0011
O/U FREQ. f3 (P3621) = ON and f3 PICKUP (P3622/3623) < Rated Frequency (P230) 0101
PTUF3.Str.general 0001
device annunciation / setting: 1 - ON / TRUE IEC Status Str.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
5238 Frequency protection: f3 TRIP (f3 TRIP) 0011
O/U FREQ. f3 (P3621) = ON and f3 PICKUP (P3622/3623) < Rated Frequency (P230) 0101
PTUF3.Op.general 0001
device annunciation / setting: 1 - ON / TRUE IEC Status Op.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
Mapping
3.12 Frequency protection (PTUFx, PTOFx)
182 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.12.4 Underfrequency protection FQS stage f4 (PTUF4)
PTUF4.Mod
PTUF4.Health
No. Information
5212 Frequency protection is BLOCKED (Freq. BLOCKED) x x 0 1 x x
5209 >BLOCK frequency protection stage f4 (>BLOCK f4) x x 0 x 1 x
5215 Frequency protection undervoltage Blk (Freq UnderV Blk) x x 0 x x 1
O/U FREQ. f4 ON (P3631) and f4 PICKUP (P3632/3633) < Rated Frequency (P230) x 01111
O/U FREQ. f4 (P3631) = OFF or f4 PICKUP (P363 2/3633) = Rated Frequency (P230) 100000
PTUF4.Mod.stVal 551222
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTUF4.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
Mapping
3.12 Frequency protection (PTUFx, PTOFx)
183SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTUF4.Str
PTUF4.Op
No. Information
5235 Frequency protection: f4 picked up (f4 picked up) 0011
O/U FREQ. f4 (P3631)= ON and f4 PICKUP (P3632/3633) < Rated Frequency (P230) 0101
PTUF4.Str.general 0001
device annunciation / setting: 1 - ON / TRUE IEC Status Str.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
5239 Frequency protection: f4 TRIP (f4 TRIP) 0011
O/U FREQ. f4 (P3631) = ON and f4 PICKUP (P3632/3633) < Rated Frequency (P230) 0101
PTUF4.Op.general 0001
device annunciation / setting: 1 - ON / TRUE IEC Status Op.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
Mapping
3.12 Frequency protection (PTUFx, PTOFx)
184 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.12.5 Overfrequency protection FQS stage f1 (PTOF1)
PTOF1.Mod
PTOF1.Health
No. Information
5212 Frequency protection is BLOCKED (Freq. BLOCKED) x x 0 1 x x
5206 >BLOCK frequency protection stage f1 (>BLOCK f1) x x 0 x 1 x
5215 Frequency protection undervoltage Blk (Freq UnderV Blk) x x 0 x x 1
O/U FREQ. f1 (P3601) = ON and f1 PICKUP (P3602/3603) < Rated Frequency (P230) x 10000
O/U FREQ. f1 (P3601) = OFF or f1 PICKUP (P3602/3603) = Rated Frequency (P230) 100000
PTOF1.Mod.stVal 551222
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOF1.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
Mapping
3.12 Frequency protection (PTUFx, PTOFx)
185SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTOF1.Str
PTOF1.Op
No. Information
5232 Frequency protection: f1 picked up (f1 picked up) 0011
O/U FREQ. f1 (P3601) = ON and f1 PICKUP (P3602/3603) > Rated Frequency (P230) 1010
PTOF1.Str.general 0010
device annunciation / setting: 1 - ON / TRUE IEC Status Str.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
5236 Frequency protection: f1 TRIP (f1 TRIP) 0011
O/U FREQ. f1 (P3601) = ON and f1 PICKUP (P3602/3603) > Rated Frequency (P230)q 1010
PTOF1.Op.general 0010
device annunciation / setting: 1 - ON / TRUE IEC Status Op.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
Mapping
3.12 Frequency protection (PTUFx, PTOFx)
186 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.12.6 Overfrequency protection FQS stage f2 (PTOF2)
PTOF2.Mod
PTOF2.Health
No. Information
5212 Frequency protection is BLOCKED (Freq. BLOCKED) x x 0 1 x x
5207 >BLOCK frequency protection stage f2 (>BLOCK f2) x x 0 x 1 x
5215 Frequency protection undervoltage Blk (Freq UnderV Blk) x x 0 x x 1
O/U FREQ. f2 (P3611) = ON and f2 PICKUP (P3612/3613) < Rated Frequency (P230) x 10000
O/U FREQ. f2 (P3611) = OFF or f2 PICKUP (P361 2/3613) = Rated Frequency (P230) 100000
PTOF2.Mod.stVal 551222
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOF2.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
Mapping
3.12 Frequency protection (PTUFx, PTOFx)
187SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTOF2.Str
PTOF2.Op
No. Information
5233 Frequency protection: f2 picked up (f2 picked up) 0011
O/U FREQ. f2 (P3611)= ON and f2 PICKUP (P3612/3613) > Rated Frequency (P230) 1010
PTOF2.Str.general 0010
device annunciation / setting: 1 - ON / TRUE IEC Status Str.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
5237 Frequency protection: f2 TRIP (f2 TRIP) 0011
O/U FREQ. f2 (P3611) = ON and f2 PICKUP (P3612/3613) > Rated Frequency (P230) 1010
PTOF2.Op.general 0010
device annunciation / setting: 1 - ON / TRUE IEC Status Op.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
Mapping
3.12 Frequency protection (PTUFx, PTOFx)
188 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.12.7 Overfrequency protection FQS stage f3 (PTOF3)
PTOF3.Mod
PTOF3.Health
No. Information
5212 Frequency protection is BLOCKED (Freq. BLOCKED) x x 0 1 x x
5208 >BLOCK frequency protection stage f3 (>BLOCK f3) x x 0 x 1 x
5215 Frequency protection undervoltage Blk (Freq UnderV Blk) x x 0 x x 1
O/U FREQ. f3 (P3621) = ON and f3 PICKUP (P3622/3623) < Rated Frequency (P230) x 10000
O/U FREQ. f3 (P3621)= OFF or f3 PICKUP (P3622/3623) = Rated Frequency (P230) 100000
PTOF3.Mod.stVal 551222
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOF3.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
Mapping
3.12 Frequency protection (PTUFx, PTOFx)
189SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTOF3.Str
PTOF3.Op
No. Information
5234 Frequency protection: f3 picked up (f3 picked up) 0011
O/U FREQ. f3 (P3621) = ON and f3 PICKUP (P3622/3623) > Rated Frequency (P230) 1010
PTOF3.Str.general 0010
device annunciation / setting: 1 - ON / TRUE IEC Status Str.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
5238 Frequency protection: f3 TRIP (f3 TRIP) 0011
O/U FREQ. f3 (P3621) = ON and f3 PICKUP (P3622/3623) > Rated Frequency (P230) 1010
PTOF3.Op.general 0010
device annunciation / setting: 1 - ON / TRUE IEC Status Op.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
Mapping
3.12 Frequency protection (PTUFx, PTOFx)
190 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.12.8 Overfrequency protection FQS stage f4 (PTOF4)
PTOF4.Mod
PTOF4.Health
No. Information
5212 Frequency protection is BLOCKED (Freq. BLOCKED) x x 0 1 x x
5209 >BLOCK frequency protection stage f4 (>BLOCK f4) x x 0 x 1 x
5215 Frequency protection undervoltage Blk (Freq UnderV Blk) x x 0 x x 1
O/U FREQ. f4 (P3631) = ON and f4 PICKUP (P3632/3633) < Rated Frequency (P230) x 10000
O/U FREQ. f4 (P3631) = OFF or f4 PICKUP (P363 2/3633) = Rated Frequency (P230) 100000
PTOF4.Mod.stVal 551222
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
x - irrelevant 3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTOF4.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
Mapping
3.12 Frequency protection (PTUFx, PTOFx)
191SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTOF4.Str
PTOF4.Op
No. Information
5235 Frequency protection: f4 picked up (f4 picked up) 0011
O/U FREQ. f4 (P3631) = ON and f4 PICKUP (P3632/3633) > Rated Frequency (P230) 1010
PTOF4.Str.general 0010
device annunciation / setting: 1 - ON / TRUE IEC Status Str.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
No. Information
5239 Frequency protection: f4 TRIP (f4 TRIP) 0011
O/U FREQ. f4 (P3631) = ON and f4 PICKUP (P3632/3633) > Rated Frequency (P230) 1010
PTOF4.Op.general 0010
device annunciation / setting: 1 - ON / TRUE IEC Status Op.general: 0 - FALSE
0 - OFF / FALSE 1 - TRUE
Mapping
3.13 Fault locator (RFLO1)
192 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.13 Fault locator (RFLO1)
RFLO1.Mod
RFLO1.Health
No. Information
Fault Locator (P138) = Enabled or with BCD-output 0 1
RFLO1.Mod.stVal 5 1
device annunciation / setting: 1 - ON / TRUE IEC Status Mod.stVal: 1 - ON
0 - OFF / FALSE 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0011
1133 Fault locator setting error K0,angle(K0) (Flt.Loc.ErrorK0) 0101
RFLO1.Health.stVal 3312
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
Mapping
3.13 Fault locator (RFLO1)
193SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
RFLO1.FltZ
RFLO1.FltDiskm
RFLO1.FltDisPrc
No. Information Value
Absolute value of the fault
impedance RFLO1.FltZ.cVal.mag.f Measured value A bsolute value
RFLO1.FltZ.units.SIUnit 30 Ω (Ohm)
RFLO1.FltZ.units.multiplier 0 1
Angle of the fault impedance RFLO1.FltZ.cVal.ang.f Measured value Angle in °
No. Information Value
1119
or
1122
Flt Locator: Distance to fault
(dist =) RFLO1.FltDiskm.mag.f Measured value Absolute value
RFLO1.FltDiskm.units.SIUnit 2 Meter or miles
RFLO1.FltDiskm.units.multiplier 3 Kilo
No. Information Value
1120 Flt Locator: Distance [%] to fault
(d[%] =) RFLO1.FltDisPrc.mag.f Measured value Absolute value
RFLO1.FltDisPrc.units.SIUnit 1 NONE
RFLO1.FltDisPrc.multiplier 0 1
Mapping
3.14 Circuit breaker failure protection (RBRF1)
194 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.14 Circuit breaker failure protection (RBRF1)
RBRF1.Mod
RBRF1.Health
RBRF1.Str
RBRF1.OpEx
No. Information
1452 Breaker failure is BLOCKED (BkrFail BLOCK) 0011
1451 Breaker failure is switched OFF (BkrFail OFF) 0101
RBRF1.Mod.stVal 1525
device annunciati on : 1 - ON IEC Status Mod.stVal : 1 - ON
0 - OFF 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
RBRF1.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
1461 Breaker failure protection started (BF Start) 0 1
RBRF1.Str.general 0 1
device annunciati on : 1 - ON IEC Status Str.gene ral: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
1494 BF Trip T2 (busbar trip) (BF T2-TRIP(bus)) 0 1
RBRF1.OpEx.general 0 1
device annunciation: 1 - ON IEC Status OpEx.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.14 Circuit breaker failure protection (RBRF1)
195SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
RBRF1.OpIn
RBRF1.OpIn.phsA
RBRF1.OpIn.phsB
RBRF1.OpIn.phsC
No. Information
1472 BF Trip T1 (local trip) - only phase L1 (BF T1-TRIP 1pL1) 0 1 x x x
1473 BF Trip T1 (local trip) - only phase L2 (BF T1-TRIP 1pL2) 0 x 1 x x
1474 BF Trip T1 (local trip) - only phase L3 (BF T1-TRIP 1pL3) 0 x x 1 x
1476 BF Trip T1 (local trip) - 3pole (BF T1-TRIP L123) 0 x x x 1
RBRF1.OpIn.general 01111
device annunciation: 1 - ON IEC Status OpIn.general: 0 - FALSE
0 - OFF 1 - TRUE
x - irrelevant
No. Information
1472 BF Trip T1 (local trip) - only phase L1 (BF T1-TRIP 1pL1) 0 1
RBRF1.OpIn.phsA 0 1
device annunciation: 1 - ON IEC Status OpIn.phsA: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
1473 BF Trip T1 (local trip) - only phase L2 (BF T1-TRIP 1pL2) 0 1
RBRF1.OpIn.phsB 0 1
device annunciation: 1 - ON IEC Status OpIn.phsB: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
1474 BF Trip T1 (local trip) - only phase L3 (BF T1-TRIP 1pL3) 0 1
RBRF1.OpIn.phsC 0 1
device annunciation: 1 - ON IEC Status OpIn.phsC: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.15 Thermal overload protection (PTTR1)
196 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.15 Thermal overload protection (PTTR1)
PTTR1.Mod
PTTR1.Health
PTTR1.Str
PTTR1.Op
No. Information
1513 Thermal Overload Protection ACTIVE (Th.O/L ACTIVE) x 0 1 1
1512 Thermal Overload Protection BLOCKED (Th.Overload BLK) x x 0 1
1511 Thermal Overload Protection OFF (Th.Overload OFF) 1000
PTTR1.Mod.stVal 5512
device annunciati on : 1 - ON IEC Status Mod.stVal : 1 - ON
0 - OFF 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTTR1.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
1517 Th. Overload Pickup before trip (Th.O/L Pickup) 0 1
PTTR1.Str.general 0 1
device annunciati on : 1 - ON IEC Status Str.gene ral: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
1521 Th. Overload TRIP command (Th.O/L TRIP) 0 1
PTTR1.Op.general 0 1
device annunciation: 1 - ON IEC Status Op.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.15 Thermal overload protection (PTTR1)
197SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTTR1.AlmThm
No. Information
1516 Th. Overload Alarm: Near Thermal Trip (Th.O/L Θ Alarm) 0 1
PTTR1.AlmThm.general 0 1
device annunciation: 1 - ON IEC Status AlmThm.general: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx)
198 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx)
3.16.1 Threepole tripping (XCBR1)
XCBR1.Mod
XCBR1.Health
XCBR1.Loc
XCBR1.OpCnt
No. Information
52 At Least 1 Protection Funct. is Active (ProtActive) 1 0
XCBR1.Mod.stVal 1 5
device annunciati on : 1 - ON IEC Status Mod.stVal : 1 - ON
0 - OFF 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
XCBR1.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
55 Reset Device (Reset Device) 1 0
XCBR1.Loc.stVal 1 0
device annunciation: 1 - ON IEC Status Loc.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information Value
1000 Number of breaker TRIP commands (# TRIPs=) XCBR1.OpCnt.stVal Metered value Absolute value
Mapping
3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx)
199SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
XCBR1.Pos
XCBR1.BlkOpn
XCBR1.BlkCls
XCBR1.CirSpv
No. Information
4601 >52-a contact (OPEN, if bkr is open) (>52-a) 0101
4602 >52-b contact (OPEN, if bkr is closed) (>52-b) 0011
XCBR1.Pos.stVal - if spontan information 11 01 10 11
XCBR1.Pos.stVal - if c ommand is running 00 01 10 00
device annunciation: 1 - ON IEC Status Pos.stVal: 00 - INTERMEDIATE STATE
0 - OFF 01 - OFF
10 - ON
11 - BAD STATE
No. Information
55 Reset Device (Reset Device) 1 0
XCBR1.BlkOpn.stVal 0 1
device annunciation: 1 - ON IEC Status BlkOpn.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
55 Reset Device (Reset Device) 1 0
XCBR1.BlkCls.stVal 0 1
device annunciation: 1 - ON IEC Status BlkCls.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
6865 Failure Trip Circuit (FAIL: Trip cir.) 0 1
XCBR1.CirSpv.stVal 0 1
device annunciation: 1 - ON IEC Status CirSpv.stVal: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx)
200 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
XCBR1.SumSwARs1
XCBR1.SumSwARs2
XCBR1.SumSwARs3
No. Information Value
1027 Accumulation of
interrupted current L1
(Σ IL1 =)
XCBR1.SumSwARs1.actVal Metered value Current value of
acummulated interrupted
current = actVal × pulsQty
XCBR1.SumSwARs1.units.SIUnit 5 A (Ampere)
XCBR1.SumSwARs1.units.multiplier 3 Kilo
XCBR1.SumSwARs1.pulsQty 1.000000e-002 A / Metered value
No. Information Value
1028 Accumulation of
interrupted current L2
(Σ IL2 =)
XCBR1.SumSwARs2.actVal Metered value Current value of
acummulated interrupted
current = actVal × pulsQty
XCBR1.SumSwARs2.units.SIUnit 5 A (Ampere)
XCBR1.SumSwARs2.units.multiplier 3 Kilo
XCBR1.SumSwARs2.pulsQty 1.000000e-002 A / Metered value
No. Information Value
1029 Accumulation of
interrupted current L3
(Σ IL3 =)
XCBR1.SumSwARs3.actVal Metered value Current value of
acummulated interrupted
current = actVal × pulsQty
XCBR1.SumSwARs3.units.SIUnit 5 A (Ampere)
XCBR1.SumSwARs3.units.multiplier 3 Kilo
XCBR1.SumSwARs3.pulsQty 1.000000e-002 A / Metered value
Mapping
3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx)
201SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.16.2 Single-pole / threepole tripping (XCBR2, XCBR3, XCBR4)
XCBR2.Mod
XCBR2.Health
XCBR2.Loc
XCBR2.OpCnt
No. Information
52 At Least 1 Protection Funct. is Active ( ProtActive) 1 0
XCBR2.Mod.stVal 1 5
device annunciation: 1 - ON IEC Status Mod.stVal: 1 - ON
0 - OFF 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
XCBR2.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
55 Reset Device (Reset Device) 1 0
XCBR2.Loc.stVal 1 0
device annunciation: 1 - ON IEC Status Loc.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information Value
1001 Number of breaker TRIP commands L1 (TripNo L1=) XCBR2.OpCnt.stVal Metered value Absolute value
Mapping
3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx)
202 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
XCBR2.Pos
XCBR2.BlkOpn
XCBR2.BlkCls
XCBR2.CirSpv
No. Information
351 >Circuit breaker aux. contact: Pole L1 (>CB Aux. L1) 0 1
XCBR2.Pos.stVal 01 10
device annunciati on : 1 - ON IEC Status Pos.stVal: 00 - INTERMEDIATE STATE
0 - OFF 01 - OFF
10 - ON
11 - BAD STAT E
No. Information
55 Reset Device (Reset Device) 1 0
XCBR2.BlkOpn.stVal 0 1
device annunciation : 1 - ON IEC Status BlkOpn.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
55 Reset Device (Reset Device) 1 0
XCBR2.BlkCls.stVal 0 1
device annunciation : 1 - ON IEC Status BlkCls.stval: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
6865 Failure Trip Circuit (FAIL: Trip cir.) 0 1
XCBR2.CirSpv.stVal 0 1
device annunciation: 1 - ON IEC Status CirSpv.stVal: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx)
203SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
XCBR2.SumSwARs
XCBR3.Mod
XCBR3.Health
XCBR3.Loc
No. Information Value
1027 Accumulation of
interrupted current L1
(Σ IL1 =)
XCBR2.SumSwARs.actVal Metered value Current value of
acummulated interrupted
current = actVal × pulsQty
XCBR2.SumSwARs.units.SIUnit 5 A (Ampere)
XCBR2.SumSwARs.units.multiplier 3 Kilo
XCBR2.SumSwARs.pulsQty 1.000000e-002 A / Metered value
No. Information
52 At Least 1 Protection Funct. is Active ( ProtActive) 1 0
XCBR3.Mod.stVal 1 5
device annunciation: 1 - ON IEC Status Mod.stVal: 1 - ON
0 - OFF 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
XCBR3.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
55 Reset Device (Reset Device) 1 0
XCBR3.Loc.stVal 1 0
device annunciation: 1 - ON IEC Status Loc.stVal: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx)
204 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
XCBR3.OpCnt
XCBR3.Pos
XCBR3.BlkOpn
XCBR3.BlkCls
XCBR3.CirSpv
No. Information Value
1002 Number of breaker TRIP commands L2 (TripNo L2=) XCBR3.OpCnt.stVal Metered value Absolute value
No. Information
352 >Circuit breaker aux. contact: Pole L2 (>CB Aux. L2) 0 1
XCBR3.Pos.stVal 01 10
device annunciati on : 1 - ON IEC Status Pos.stVal: 00 - INTERMEDIATE STATE
0 - OFF 01 - OFF
10 - ON
11 - BAD STAT E
No. Information
55 Reset Device (Reset Device) 1 0
XCBR3.BlkOpn.stVal 0 1
device annunciation : 1 - ON IEC Status BlkOpn.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
55 Reset Device (Reset Device) 1 0
XCBR3.BlkCls.stVal 0 1
device annunciation : 1 - ON IEC Status BlkCls.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
6865 Failure Trip Circuit (FAIL: Trip cir.) 0 1
XCBR3.CirSpv.stVal 0 1
device annunciation: 1 - ON IEC Status CirSpv.stVal: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx)
205SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
XCBR3.SumSwARs
XCBR4.Mod
XCBR4.Health
XCBR4.Loc
No. Information Value
1028 Accumulation of
interrupted current L2
(Σ IL2 =)
XCBR3.SumSwARs.actVal Metered value Current value of
acummulated interrupted
current = actVal × pulsQty
XCBR3.SumSwARs.units.SIUnit 5 A (Ampere)
XCBR3.SumSwARs.units.multiplier 3 Kilo
XCBR3.SumSwARs.pulsQty 1.000000e-002 A / Metered value
No. Information
52 At Least 1 Protection Funct. is Active ( ProtActive) 1 0
XCBR4.Mod.stVal 1 5
device annunciation: 1 - ON IEC Status Mod.stVal: 1 - ON
0 - OFF 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
XCBR4.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
55 Reset Device (Reset Device) 1 0
XCBR4.Loc.stVal 1 0
device annunciation: 1 - ON IEC Status Loc.stVal: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx)
206 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
XCBR4.OpCnt
XCBR4.Pos
XCBR4.BlkOpn
XCBR4.BlkCls
XCBR4.CirSpv
No. Information Value
1003 Number of breaker TRIP commands L3 (TripNo L3=) XCBR4.OpCnt.stVal Metered value Absolute value
No. Information
353 >Circuit breaker aux. contact: Pole L3 (>CB Aux. L3) 0 1
XCBR4.Pos.stVal 01 10
device annunciati on : 1 - ON IEC Status Pos.stVal: 00 - INTERMEDIATE STATE
0 - OFF 01 - OFF
10 - ON
11 - BAD STAT E
No. Information
55 Reset Device (Reset Device) 1 0
XCBR4.BlkOpn.stVal 0 1
device annunciation: 1 - ON IEC Status BlkOpn.stval: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
55 Reset Device (Reset Device) 1 0
XCBR4.BlkCls.stVal 0 1
device annunciation : 1 - ON IEC Status BlkCls.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
6865 Failure Trip Circuit (FAIL: Trip cir.) 0 1
XCBR4.CirSpv.stVal 0 1
device annunciation: 1 - ON IEC Status CirSpv.stVal: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.16 Single-pole / threepole tripping Circuit Breaker (XCBRx)
207SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
XCBR4.SumSwARs
No. Information Value
1029 Accumulation of
interrupted current L3
(Σ IL3 =)
XCBR4.SumSwARs.actVal Metered value Current value of
acummulated interrupted
current = actVal × pulsQty
XCBR4.SumSwARs.units.SIUnit 5 A (Ampere)
XCBR4.SumSwARs.units.multiplier 3 Kilo
XCBR4.SumSwARs.pulsQty 1.000000e-002 A / Metered value
Mapping
3.17 Tripping Logic of the Entire Device (PTRC1)
208 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.17 Tripping Logic of the Entire Device (PTRC1)
PTRC1.Mod
PTRC1.Health
PTRC1.Str
No. Information
52 At Least 1 Protection Funct. is Active (ProtActive) 1 0
PTRC1.Mod.stVal 1 5
device annunciati on : 1 - ON IEC Status Mod.stVal : 1 - ON
0 - OFF 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
PTRC1.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
501 Relay PICKUP (Relay PICKUP) 01xxxx
503 Relay PICKUP Phase L1 (Relay PICKUP L1) 0 x 1 x x x
504 Relay PICKUP Phase L2 (Relay PICKUP L2) 0 x x 1 x x
505 Relay PICKUP Phase L3 (Relay PICKUP L3) 0 x x x 1 x
506 Relay PICKUP Earth (Relay PICKUP E) 0xxxx1
PTRC1.Str.general 011111
device annunciati on : 1 - ON IEC Status Str.gene ral: 0 - FALSE
0 - OFF 1 - TRUE
X - irrelevant
Mapping
3.17 Tripping Logic of the Entire Device (PTRC1)
209SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTRC1.Str.dirGeneral
PTRC1.Str.phsA
PTRC1.Str.phsB
PTRC1.Str.phsC
No. Information
3719 Distance Pickup FORWARD (Dis. forward) 010100011xx
1358 E/F picked up FORWARD (EF forward) 0011000xx11
3720 Distance Pickup REVERSE (Dis. reverse) 00001011x1x
1359 E/F picked up REVERSE (EF reverse) 0000011x1x1
PTRC1.Str.dirGeneral 01112223333
device annunciation: 1 - ON IEC Status Str.dirGeneral: 0 - UNKNOWN
0 - OFF 1 - FORWARD
x - irrelevant 2 - BACKWARD
3 - BOTH
No. Information
503 Relay PICKUP Phase L1 (Relay PICKUP L1) 0 1
PTRC1.Str.phsA 0 1
device annunciation: 1 - ON IEC Status Str.phsA: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
504 Relay PICKUP Phase L2 (Relay PICKUP L2) 0 1
PTRC1.Str.phsB 0 1
device annunciation: 1 - ON IEC Status Str.phsB: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
505 Relay PICKUP Phase L3 (Relay PICKUP L3) 0 1
PTRC1.Str.phsC 0 1
device annunciation: 1 - ON IEC Status Str.phsC: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.17 Tripping Logic of the Entire Device (PTRC1)
210 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTRC1.Str.neut
PTRC1.Tr.dirGeneral
PTRC1.Tr.phsA
PTRC1.Tr.phsB
No. Information
506 Relay PICKUP Earth (Relay PICKUP E) 0 1
PTRC1.Str.neut 0 1
device annunciation: 1 - ON IEC Status Str.neut: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
501 Relay PICKUP (Relay PICKUP) 0 1 x x x
507 Relay TRIP command Phase L1 (Relay TRIP L1) 0 x 1 x x
508 Relay TRIP command Phase L2 (Relay TRIP L2) 0 x x 1 x
509 Relay TRIP command Phase L3 (Relay TRIP L3) 0 x x x 1
PTRC1.Tr.dirGeneral 01111
device annunciati on : 1 - ON IEC Status Tr.dir Gen er al : 0 - UNKNOWN
0 - OFF 1 - FORWARD
x - irrelevant 2 - BACKWARD
3 - BOTH
No. Information
507 Relay TRIP command Phase L1 (Relay TRIP L1) 0 1
PTRC1.Tr.phsA 0 1
device annunciation : 1 - ON IEC Status Tr.phsA: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
508 Relay TRIP command Phase L2 (Relay TRIP L2) 0 1
PTRC1.Tr.phsB 0 1
device annunciation : 1 - ON IEC Status Tr.phsB: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.17 Tripping Logic of the Entire Device (PTRC1)
211SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
PTRC1.Tr.phsC
PTRC1.FinTr
No. Information
509 Relay TRIP command Phase L3 ( Relay TRIP L3) 0 1
PTRC1.Tr.phsC 0 1
device annunciation: 1 - ON IEC Status Tr.phsC: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
536 Relay Definitive TRIP (Definitive TRIP) 0 1
PTRC1.FinTr.stVal 0 1
device annunciation: 1 - ON IEC Status FinTr.stVal: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.18 Device (LPHD1, CALH1)
212 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.18 Device (LPHD1, CALH1)
LPHD1.DevStr
LPHD1.PhyHealth
LPHD1.Proxy
No. Information
56 Initial Start of Device (Initial Start) 0011
67 Resume (Resume) 0101
LPHD1.DevStr.stVal T 2 1 T
device annunciation: 1 - ON IEC Status DevStr.stVal: 1 - Initial Start
0 - OFF 2 - Resume
x - irrelevant T - toggel between 1 and 2
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
LPHD1.PhyHealth.stVal 3 1
device annunciation : 1 - ON IEC Status PhyHealth.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
55 Reset Device (Reset Device) 0 1
LPHD1.Proxy.stVal 1 0
device annunciati on : 1 - ON IEC Status Proxy.stVal: 0 - DEVICE is not a PROXY
0 - OFF 1 - DEVICE is a PROXY
Mapping
3.18 Device (LPHD1, CALH1)
213SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.18.1 Alarm-, Warn- and Group alarms (CALH1)
CALH1.Mod
CALH1.Health
CALH1.GrAlm
CALH1.GrWrn
No. Information
55 Reset Device (Reset Device) 1 0
CALH1.Mod.stVal 1 5
device annunciation: 1 - ON IEC Status Mod.stVal: 1 - ON
0 - OFF 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
CALH1.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
140 Error with a summary alarm (Error Sum Alarm) 1 0
CALH1.GrAlm.stVal 1 0
device annunciation: 1 - ON IEC Status GrAlm.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
160 Alarm Summary Event (Alarm Sum Event) 1 0
CALH1.GrWrn.stVal 1 0
device annunciation: 1 - ON IEC Status GrWrn.stVal: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.18 Device (LPHD1, CALH1)
214 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
The LN CALH1.ErrBoard1 to CA LH1.ErrBoard7 are available
SIPROTEC 7SA with Firmware V04.65 and higher
SIPROTEC 7SD with Firmware V04.61 and higher
SIPROTEC 7VK with Firmware V04.60 and higher.
CALH1.ErrBoard1
CALH1.ErrBoard2
CALH1.ErrBoard3
CALH1.ErrBoard4
No. Information
183 Error Board 1 ( Error Board 1) 1 0
CALH1.ErrBoard1.stVal 1 0
device annunciati on : 1 - ON IEC Status ErrBoa rd1.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
184 Error Board 2 ( Error Board 2) 1 0
CALH1.ErrBoard2.stVal 1 0
device annunciati on : 1 - ON IEC Status ErrBoa rd2.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
185 Error Board 3 ( Error Board 3) 1 0
CALH1.ErrBoard3.stVal 1 0
device annunciati on : 1 - ON IEC Status ErrBoa rd3.stVal: 0 - FALSE
0 - OFF 1 - TRUE
No. Information
186 Error Board 4 ( Error Board 4) 1 0
CALH1.ErrBoard4.stVal 1 0
device annunciati on : 1 - ON IEC Status ErrBoa rd4.stVal: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.18 Device (LPHD1, CALH1)
215SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
CALH1.ErrBoard5
CALH1.ErrBoard6
CALH1.ErrBoard7
No. Information
187 Error Board 5 (Error Board 5) 1 0
CALH1.ErrBoard5.stVal 1 0
device annunc iation: 1 - ON IEC Status ErrBoard5.stVal: 0 - FALS E
0 - OFF 1 - TRUE
No. Information
188 Error Board 6 (Error Board 6) 1 0
CALH1.ErrBoard6.stVal 1 0
device annunc iation: 1 - ON IEC Status ErrBoard6.stVal: 0 - FALS E
0 - OFF 1 - TRUE
No. Information
189 Error Board 7 (Error Board 7) 1 0
CALH1.ErrBoard7.stVal 1 0
device annunc iation: 1 - ON IEC Status ErrBoard7.stVal: 0 - FALS E
0 - OFF 1 - TRUE
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
216 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.19 Measurements (MMXUx, MSQI1, MMTR1)
3.19.1 Measured values of local device (MMXU1)
MMXU1.Mod
MMXU1.Health
No. Information
51 Device is Operational and Protecting (Device OK) 1 0
MMXU1.Mod.stVal 1 5
device annunciati on : 1 - ON IEC Status Mod.stVal : 1 - ON
0 - OFF 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
MMXU1.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
217SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
MMXU1.TotW
MMXU1.TotVAr
MMXU1.TotVA
MMXU1.TotPF
MMXU1.Hz
No. Information Value
641 P (active power) (P =) MMXU1.TotW.mag.f Measured value Absolute value
MMXU1.TotW.units.SIUnit 62 W (Watt)
MMXU1.TotW.units.multiplier 6 Mega
No. Information Value
642 Q (reactive power) (Q =) MMXU1.TotVAr.mag.f Measured value Absolute value
MMXU1.TotVAr.units.SIUnit 63 VAr
MMXU1.TotVAr.units.multiplier 6 Mega
No. Information Value
645 S (apparent power) (S =) MMXU1.TotVA.mag.f Measured value Absolute value
MMXU1.TotVA.units.SIUnit 61 VA
MMXU1.TotVA.units.multiplier 6 Mega
No. Information Value
643 cos PHI (Power factor)
(cos phi =) MMXU1.TotPF.mag.f Measured value Absolute value
MMXU1.TotPF.units.SIUnit 1 NONE
MMXU1.TotPF.units.multiplier 0 1
No. Information Value
644 Frequency (Freq=) MMXU1.Hz.mag.f Measured value Absolute value
MMXU1.Hz.units.SIUnit 33 Hz
MMXU1.Hz.units.multiplier 0 1
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
218 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
MMXU1.A
MMXU1.PPV
No. Information Value
601 I L1 (IL1 =) MMXU1.A.phsA.cVal.mag.f Measured value Absolute value
MMXU1.A.phsA.units.SIUnit 5 A (Ampere)
MMXU1.A.phsA.units.multiplier 0 1
No. Information Value
602 I L2 (IL2 =) MMXU1.A.phsB.cVal.mag.f Measured value Absolute value
MMXU1.A.phsB.units.SIUnit 5 A (Ampere)
MMXU1.A.phsB.units.multiplier 0 1
No. Information Value
603 I L3 (IL3 =) MMXU1.A.phsC.cVal.mag.f Measured value Absolute value
MMXU1.A.phsC.units.SIUnit 5 A (Ampere)
MMXU1.A.phsC.units.multiplier 0 1
No. Information Value
624 U L12 (UL12=) MMXU1.PPV.phsAB.cVal.mag.f Measured value Absolute value
MMXU1.PPV.phsAB.units.SIUnit 29 V (Volt)
MMXU1.PPV.phsAB.units.multiplier 3 Kilo
No. Information Value
625 U L23 (UL23=) MMXU1.PPV.phsBC.cVal.mag.f Measured value Absolute value
MMXU1.PPV.phsBC.units.SIUnit 29 V (Volt)
MMXU1.PPV.phsBC.units.multiplier 3 Kilo
No. Information Value
626 U L31 (UL31=) MMXU1.PPV.phsCA.cVal.mag.f Measured value Absolute value
MMXU1.PPV.phsCA.units.SIUnit 29 V (Volt)
MMXU1.PPV.phsCA.units.multiplier 3 Kilo
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
219SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
MMXU1.PhV
No. Information Value
621 U L1-E (UL1E=) MMXU1.PhV.phsA.cVal.mag.f Measured value A bsolute value
MMXU1.PhV.phsA.units.SIUnit 29 V (Volt)
MMXU1.PhV.phsA.units.multiplier 3 Kilo
No. Information Value
622 U L2-E (UL2E=) MMXU1.PhV.phsB.cVal.mag.f Measured value A bsolute value
MMXU1.PhV.phsB.units.SIUnit 29 V (Volt)
MMXU1.PhV.phsB.units.multiplier 3 Kilo
No. Information Value
623 U L3-E (UL3E=) MMXU1.PhV.phsC.cVal.mag.f Measured value Absolute value
MMXU1.PhV.phsC.units.SIUnit 29 V (Volt)
MMXU1.PhV.phsC.units.multiplier 3 Kilo
No. Information Value
627 Uen (Uen =) MMXU1.PhV.neut.cVal.mag.f Measured value Absolute value
MMXU1.PhV.neut.units.SIUnit 29 V (Volt)
MMXU1.PhV.neut.units.multiplier 3 Kilo
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
220 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.19.2 Remote measured values of relay 1 (MMXU2)
MMXU2.Mod
MMXU2.Health
MMXU2.Relld
No. Information
3491 Relay 1 in Login state (Rel1 Login) 0 1
MMXU2.Mod.stVal 5 1
device annunciati on : 1 - ON IEC Status Mod.stVal : 1 - ON
0 - OFF 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
MMXU2.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information Value
7761 Relay ID of 1. relay (Relay ID) MMXU2.RelId.stVal Parameter 4701 Device address
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
221SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
MMXU2.A
No. Information Value
7762 IL1(% of Operational nominal
current) (IL1_opN=) MMXU2.A.phsA.cVal.mag.f Measured value Absolute value
MMXU2.A.phsA.units.SIUnit 1 NONE
MMXU2.A.phsA.units.multiplier 0 1
7763 Angle IL1_rem <-> IL1_loc
(ΦI L1=) MMXU2.A.phsA.cVal.ang.f Measured value Phase angle in °
No. Information Value
7764 IL2(% of Operational nominal
current) (IL2_opN=) MMXU2.A.phsB.cVal.mag.f Measured value Absolute value
MMXU2.A.phsB.units.SIUnit 1 NONE
MMXU2.A.phsB.units.multiplier 0 1
7765 Angle IL2_rem <-> IL2_loc
(ΦI L2=) MMXU2.A.phsB.cVal.ang.f Measured value Phase angle in °
No. Information Value
7766 IL3(% of Operational nominal
current) (IL3_opN=) MMXU2.A.phsC.cVal.mag.f Measured value Absolute value
MMXU2.A.phsC.units.SIUnit 1 NONE
MMXU2.A.phsC.units.multiplier 0 1
7767 Angle IL3_rem <-> IL3_loc
(ΦI L3=) MMXU2.A.phsC.cVal.ang.f Measured value Phase angle in °
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
222 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
MMXU2.PhV
No. Information Value
7769 UL1(% of Operational nominal
voltage) (UL1_opN=) MMXU2.PhV.phsA.cVal.mag.f Measured value Absolute value
MMXU2. PhV.phsA.units.SIUnit 29 V (Volt)
MMXU2. PhV.phsA.units.multiplier 3 Kilo
7770 Angle UL1_rem <-> UL1_loc
(ΦU L1=) MMXU2. PhV.phsA.cVal.ang.f Measured value Phase angle in °
No. Information Value
7771 UL2(% of Operational nominal
voltage) (UL2_opN=) MMXU2.PhV.phsB.cVal.mag.f Measured value Absolute value
MMXU2. PhV.phsB.units.SIUnit 29 V (Volt)
MMXU2. PhV.phsB.units.multiplier 3 Kilo
7772 Angle UL2_rem <-> UL2_loc
(ΦU L2=) MMXU2. PhV.phsB.cVal.ang.f Measured value Phase angle in °
No. Information Value
7773 UL3(% of Operational nominal
voltage) (UL3_opN=) MMXU2.PhV.phsC.cVal.mag.f Measured value Absolute value
MMXU2. PhV.phsC.units.SIUnit 29 V (Volt)
MMXU2. PhV.phsC.units.multiplier 3 Kilo
7774 Angle UL3_rem <-> UL3_loc
(ΦU L3=) MMXU2. PhV.phsC.cVal.ang.f Measured value Phase angle in °
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
223SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.19.3 Remote measured values of relay 2 (MMXU3)
MMXU3.Mod
MMXU3.Health
MMXU3.Relld
No. Information
3492 Relay 2 in Login state (Rel2 Login) 0 1
MMXU3.Mod.stVal 5 1
device annunciation: 1 - ON IEC Status Mod.stVal: 1 - ON
0 - OFF 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
MMXU3.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information Value
7781 Relay ID of 2. relay (Relay ID) MMXU3.RelId.stVal Parameter 4702 Device address
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
224 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
MMXU3.A
No. Information Value
7782 IL1(% of Operational nominal
current) (IL1_opN=) MMXU3.A.phsA.cVal.mag.f Measured value Absolute value
MMXU3.A.phsA.units.SIUnit 1 NONE
MMXU3.A.phsA.units.multiplier 0 1
7783 Angle IL1_rem <-> IL1_loc
(ΦI L1=) MMXU3.A.phsA.cVal.ang.f Measured value Phase angle in °
No. Information Value
7784 IL2(% of Operational nominal
current) (IL2_opN=) MMXU3.A.phsB.cVal.mag.f Measured value Absolute value
MMXU3.A.phsB.units.SIUnit 1 NONE
MMXU3.A.phsB.units.multiplier 0 1
7785 Angle IL2_rem <-> IL2_loc
(ΦI L2=) MMXU3.A.phsB.cVal.ang.f Measured value Phase angle in °
No. Information Value
7786 IL3(% of Operational nominal
current) (IL3_opN=) MMXU3.A.phsC.cVal.mag.f Measured value Absolute value
MMXU3.A.phsC.units.SIUnit 1 NONE
MMXU3.A.phsC.units.multiplier 0 1
7787 Angle IL3_rem <-> IL3_loc
(ΦI L3=) MMXU3.A.phsC.cVal.ang.f Measured value Phase angle in °
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
225SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
MMXU3.PhV
No. Information Value
7789 UL1(% of Operational nominal
voltage) (UL1_opN=) MMXU3.PhV.phsA.cVal.mag.f Measured value Absolute value
MMXU3. PhV.phsA.units.SIUnit 29 V (Volt)
MMXU3. PhV.phsA.units.multiplier 3 Kilo
7790 Angle UL1_rem <-> UL1_loc
(ΦU L1=) MMXU3. PhV.phsA.cVal.ang.f Measured value Phase angle in °
No. Information Value
7791 UL2(% of Operational nominal
voltage) (UL2_opN=) MMXU3.PhV.phsB.cVal.mag.f Measured value Absolute value
MMXU3. PhV.phsB.units.SIUnit 29 V (Volt)
MMXU3. PhV.phsB.units.multiplier 3 Kilo
7792 Angle UL2_rem <-> UL2_loc
(ΦU L2=) MMXU3. PhV.phsB.cVal.ang.f Measured value Phase angle in °
No. Information Value
7793 UL3(% of Operational nominal
voltage) (UL3_opN=) MMXU3.PhV.phsC.cVal.mag.f Measured value Absolute value
MMXU3. PhV.phsC.units.SIUnit 29 V (Volt)
MMXU3. PhV.phsC.units.multiplier 3 Kilo
7794 Angle UL3_rem <-> UL3_loc
(ΦU L3=) MMXU3. PhV.phsC.cVal.ang.f Measured value Phase angle in °
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
226 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.19.4 Remote measured values of relay 3 (MMXU4)
MMXU4.Mod
MMXU4.Health
MMXU4.Relld
No. Information
3493 Relay 3 in Login state (Rel3 Login) 0 1
MMXU4.Mod.stVal 5 1
device annunciati on : 1 - ON IEC Status Mod.stVal : 1 - ON
0 - OFF 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
MMXU4.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information Value
7801 Relay ID of 3. relay (Relay ID) MMXU4.RelId.stVal Parameter 4703 Device address
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
227SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
MMXU4.A
No. Information Value
7802 IL1(% of Operational nominal
current) (IL1_opN=) MMXU4.A.phsA.cVal.mag.f Measured value Absolute value
MMXU4.A.phsA.units.SIUnit 1 NONE
MMXU4.A.phsA.units.multiplier 0 1
7803 Angle IL1_rem <-> IL1_loc
(ΦI L1=) MMXU4.A.phsA.cVal.ang.f Measured value Phase angle in °
No. Information Value
7804 IL2(% of Operational nominal
current) (IL2_opN=) MMXU4.A.phsB.cVal.mag.f Measured value Absolute value
MMXU4.A.phsB.units.SIUnit 1 NONE
MMXU4.A.phsB.units.multiplier 0 1
7805 Angle IL2_rem <-> IL2_loc
(ΦI L2=) MMXU4.A.phsB.cVal.ang.f Measured value Phase angle in °
No. Information Value
7806 IL3(% of Operational nominal
current) (IL3_opN=) MMXU4.A.phsC.cVal.mag.f Measured value Absolute value
MMXU4.A.phsC.units.SIUnit 1 NONE
MMXU4.A.phsC.units.multiplier 0 1
7807 Angle IL3_rem <-> IL3_loc
(ΦI L3=) MMXU4.A.phsC.cVal.ang.f Measured value Phase angle in °
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
228 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
MMXU4.PhV
No. Information Value
7809 UL1(% of Operational nominal
voltage) (UL1_opN=) MMXU4.PhV.phsA.cVal.mag.f Measured value Absolute value
MMXU4.PhV.phsA.units.SIUnit 29 V (Volt)
MMXU4.PhV.phsA.units.multiplier 3 Kilo
7810 Angle UL1_rem <-> UL1_loc
(ΦU L1=) MMXU4.PhV.phsA.cVal.ang.f Measured value Phase angle in °
No. Information Value
7811 UL2(% of Operational nominal
voltage) (UL2_opN=) MMXU4.PhV.phsB.cVal.mag.f Measured value Absolute value
MMXU4.PhV.phsB.units.SIUnit 29 V (Volt)
MMXU4.PhV.phsB.units.multiplier 3 Kilo
7812 Angle UL2_rem <-> UL2_loc
(ΦU L2=) MMXU4.PhV.phsB.cVal.ang.f Measured value Phase angle in °
No. Information Value
7813 UL3(% of Operational nominal
voltage) (UL3_opN=) MMXU4.PhV.phsC.cVal.mag.f Measured value Absolute value
MMXU4.PhV.phsC.units.SIUnit 29 V (Volt)
MMXU4. PhV.phsC.units.multiplier 3 Kilo
7814 Angle UL3_rem <-> UL3_loc
(ΦU L3=) MMXU4. PhV.phsC.cVal.ang.f Measured value Phase angle in °
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
229SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.19.5 Remote measured values of relay 4 (MMXU5)
MMXU5.Mod
MMXU5.Health
MMXU5.Relld
No. Information
3494 Relay 4 in Login state (Rel4 Login) 0 1
MMXU5Mod.stVal 5 1
device annunciation: 1 - ON IEC Status Mod.stVal: 1 - ON
0 - OFF 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
MMXU5Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information Value
7821 Relay ID of 4. relay (Relay ID) MMXU5RelId.stVal Parameter 4704 Device address
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
230 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
MMXU5.A
No. Information Value
7822 IL1(% of Operational nominal
current) (IL1_opN=) MMXU5A.phsA.cVal.mag.f Measured value Absolute value
MMXU5A.phsA.units.SIUnit 1 NONE
MMXU5A.phsA.units.multiplier 0 1
7823 Angle IL1_rem <-> IL1_loc
(ΦI L1=) MMXU5A.phsA.cVal.ang.f Measured value Phase angle in °
No. Information Value
7824 IL2(% of Operational nominal
current) (IL2_opN=) MMXU5A.phsB.cVal.mag.f Measured value Absolute value
MMXU5A.phsB.units.SIUnit 1 NONE
MMXU5A.phsB.units.multiplier 0 1
7825 Angle IL2_rem <-> IL2_loc
(ΦI L2=) MMXU5A.phsB.cVal.ang.f Measured value Phase angle in °
No. Information Value
7826 IL3(% of Operational nominal
current) (IL3_opN=) MMXU5A.phsC .cVal.mag.f Measured value Absolute value
MMXU5A.phsC.units.SIUnit 1 NONE
MMXU5A.phsC.units.multiplier 0 1
7827 Angle IL3_rem <-> IL3_loc
(ΦI L3=) MMXU5A.phsC.cVal.ang.f Measured value Phase angle in °
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
231SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
MMXU5.PhV
No. Information Value
7829 UL1(% of Operational nominal
voltage) (UL1_opN=) MMXU5.PhV.phsA.cVal.mag.f Measured value Absolute value
MMXU5.PhV.phsA.units.SIUnit 29 V (Volt)
MMXU5.PhV.phsA.units.multiplier 3 Kilo
7830 Angle UL1_rem <-> UL1_loc
(ΦU L1=) MMXU5.PhV.phsA.cVal.ang.f Measured value Phase angle in °
No. Information Value
7831 UL2(% of Operational nominal
voltage) (UL2_opN=) MMXU5.PhV.phsB.cVal.mag.f Measured value Absolute value
MMXU5.PhV.phsB.units.SIUnit 29 V (Volt)
MMXU5.PhV.phsB.units.multiplier 3 Kilo
7832 Angle UL2_rem <-> UL2_loc
(ΦU L2=) MMXU5.PhV.phsB.cVal.ang.f Measured value Phase angle in °
No. Information Value
7833 UL3(% of Operational nominal
voltage) (UL3_opN=) MMXU5.PhV.phsC.cVal.mag.f Measured value Absolute value
MMXU5.PhV.phsC.units.SIUnit 29 V (Volt)
MMXU5. PhV.phsC.units.multiplier 3 Kilo
7834 Angle UL3_rem <-> UL3_loc
(ΦU L3=) MMXU5. PhV.phsC.cVal.ang.f Measured value Phase angle in °
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
232 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.19.6 Remote measured values of relay 5 (MMXU6)
MMXU6.Mod
MMXU6.Health
MMXU6.Relld
No. Information
3495 Relay 5 in Login state (Rel5 Login) 0 1
MMXU6.Mod.stVal 5 1
device annunciati on : 1 - ON IEC Status Mod.stVal : 1 - ON
0 - OFF 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
MMXU6.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information Value
7841 Relay ID of 5. relay (Relay ID) MMXU6.RelId.stVal Parameter 4705 Device address
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
233SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
MMXU6.A
No. Information Value
7842 IL1(% of Operational nominal
current) (IL1_opN=) MMXU6.A.phsA.cVal.mag.f Measured value Absolute value
MMXU6.A.phsA.units.SIUnit 1 NONE
MMXU6.A.phsA.units.multiplier 0 1
7843 Angle IL1_rem <-> IL1_loc
(ΦI L1=) MMXU6.A.phsA.cVal.ang.f Measured value Phase angle in °
No. Information Value
7844 IL2(% of Operational nominal
current) (IL2_opN=) MMXU6.A.phsB.cVal.mag.f Measured value Absolute value
MMXU6.A.phsB.units.SIUnit 1 NONE
MMXU6.A.phsB.units.multiplier 0 1
7845 Angle IL2_rem <-> IL2_loc
(ΦI L2=) MMXU6.A.phsB.cVal.ang.f Measured value Phase angle in °
No. Information Value
7846 IL3(% of Operational nominal
current) (IL3_opN=) MMXU6.A.phsC.cVal.mag.f Measured value Absolute value
MMXU6.A.phsC.units.SIUnit 1 NONE
MMXU6.A.phsC.units.multiplier 0 1
7847 Angle IL3_rem <-> IL3_loc
(ΦI L3=) MMXU6.A.phsC.cVal.ang.f Measured value Phase angle in °
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
234 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
MMXU6.PhV
No. Information Value
7849 UL1(% of Operational nominal
voltage) (UL1_opN=) MMXU6.PhV.phsA.cVal.mag.f Measured value Absolute value
MMXU6.PhV.phsA.units.SIUnit 29 V (Volt)
MMXU6.PhV.phsA.units.multiplier 3 Kilo
7850 Angle UL1_rem <-> UL1_loc
(ΦU L1=) MMXU6.PhV.phsA.cVal.ang.f Measured value Phase angle in °
No. Information Value
7851 UL2(% of Operational nominal
voltage) (UL2_opN=) MMXU6.PhV.phsB.cVal.mag.f Measured value Absolute value
MMXU6.PhV.phsB.units.SIUnit 29 V (Volt)
MMXU6.PhV.phsB.units.multiplier 3 Kilo
7852 Angle UL2_rem <-> UL2_loc
(ΦU L2=) MMXU6.PhV.phsB.cVal.ang.f Measured value Phase angle in °
No. Information Value
7853 UL3(% of Operational nominal
voltage) (UL3_opN=) MMXU6.PhV.phsC.cVal.mag.f Measured value Absolute value
MMXU6.PhV.phsC.units.SIUnit 29 V (Volt)
MMXU6. PhV.phsC.units.multiplier 3 Kilo
7854 Angle UL3_rem <-> UL3_loc
(ΦU L3=) MMXU6. PhV.phsC.cVal.ang.f Measured value Phase angle in °
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
235SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.19.7 Remote measured values of relay 6 (MMXU7)
MMXU7.Mod
MMXU7.Health
MMXU7.Relld
No. Information
3496 Relay 6 in Login state (Rel6 Login) 0 1
MMXU7.Mod.stVal 5 1
device annunciation: 1 - ON IEC Status Mod.stVal: 1 - ON
0 - OFF 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
MMXU7.Health.stVal 3 1
device annunciation: 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information Value
7861 Relay ID of 6. relay (Relay ID) MMXU7.RelId.stVal Parameter 4706 Device address
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
236 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
MMXU7.A
No. Information Value
7862 IL1(% of Operational nominal
current) (IL1_opN=) MMXU7.A.phsA.cVal.mag.f Measured value Absolute value
MMXU7.A.phsA.units.SIUnit 1 NONE
MMXU7.A.phsA.units.multiplier 0 1
7863 Angle IL1_rem <-> IL1_loc
(ΦI L1=) MMXU7.A.phsA.cVal.ang.f Measured value Phase angle in °
No. Information Value
7864 IL2(% of Operational nominal
current) (IL2_opN=) MMXU7.A.phsB.cVal.mag.f Measured value Absolute value
MMXU7.A.phsB.units.SIUnit 1 NONE
MMXU7.A.phsB.units.multiplier 0 1
7865 Angle IL2_rem <-> IL2_loc
(ΦI L2=) MMXU7.A.phsB.cVal.ang.f Measured value Phase angle in °
No. Information Value
7866 IL3(% of Operational nominal
current) (IL3_opN=) MMXU7.A.phsC.cVal.mag.f Measured value Absolute value
MMXU7.A.phsC.units.SIUnit 1 NONE
MMXU7.A.phsC.units.multiplier 0 1
7867 Angle IL3_rem <-> IL3_loc
(ΦI L3=) MMXU7.A.phsC.cVal.ang.f Measured value Phase angle in °
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
237SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
MMXU7.PhV
No. Information Value
7869 UL1(% of Operational nominal
voltage) (UL1_opN=) MMXU7.PhV.phsA.cVal.mag.f Measured value Absolute value
MMXU7.PhV.phsA.units.SIUnit 29 V (Volt)
MMXU7.PhV.phsA.units.multiplier 3 Kilo
7870 Angle UL1_rem <-> UL1_loc
(ΦU L1=) MMXU7.PhV.phsA.cVal.ang.f Measured value Phase angle in °
No. Information Value
7871 UL2(% of Operational nominal
voltage) (UL2_opN=) MMXU7.PhV.phsB.cVal.mag.f Measured value Absolute value
MMXU7.PhV.phsB.units.SIUnit 29 V (Volt)
MMXU7.PhV.phsB.units.multiplier 3 Kilo
7872 Angle UL2_rem <-> UL2_loc
(ΦU L2=) MMXU7.PhV.phsB.cVal.ang.f Measured value Phase angle in °
No. Information Value
7873 UL3(% of Operational nominal
voltage) (UL3_opN=) MMXU7.PhV.phsC.cVal.mag.f Measured value Absolute value
MMXU7.PhV.phsC.units.SIUnit 29 V (Volt)
MMXU7. PhV.phsC.units.multiplier 3 Kilo
7874 Angle UL3_rem <-> UL3_loc
(ΦU L3=) MMXU7. PhV.phsC.cVal.ang.f Measured value Phase angle in °
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
238 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.19.8 Measured values, symmetrical components (MSQI1)
MSQI1.Mod
MSQI1.Health
No. Information
51 Device is Operational and Protecting (Device OK) 1 0
MSQI1.Mod.stVal 1 5
device annunciati on : 1 - ON IEC Status Mod.stVal : 1 - ON
0 - OFF 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
MSQI1.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
239SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
MSQI1.SeqA
MSQI1.SeqV
No. Information Value
619 I1 (positive sequence) (I1 =) MSQI1.SeqA.c1.cVal.mag.f Mea sured value Absolute value
MSQI1.SeqA.c1.units.SIUnit 5 A (Ampere)
MSQI1.SeqA.c1.units.multiplier 0 1
No. Information Value
620 I2 (negative sequence) (I2 =) MSQI1.SeqA.c2.cVal.mag.f Measured value Absolute value
MSQI1.SeqA.c2.units.SIUnit 5 A (Ampere)
MSQI1.SeqA.c2.units.multiplier 0 1
No. Information Value
610 3I0 (zero sequence) (3I0 =) MSQI1.SeqA.c3.cVal.mag.f Measured value Absolute value
MSQI1.SeqA.c3.units.SIUnit 5 A (Ampere)
MSQI1.SeqA.c3.units.multiplier 0 1
No. Information Value
634 U1 (positive sequence) (U1 =) MSQI1.SeqV.c1.cVal.mag.f Measured value Absolute value
MSQI1.SeqV.c1.units.SIUnit 29 V (Volt)
MSQI1.SeqV.c1.units.multiplier 3 Kilo
No. Information Value
635 U2 (negative sequence) (U2 =) MSQI1.SeqV.c2.cVal.mag.f Measured value Absolute value
MSQI1.SeqV.c2.units.SIUnit 29 V (Volt)
MSQI1.SeqV.c2.units.multiplier 3 Kilo
No. Information Value
684 U0 (zero sequence) (U0 =) MSQI1.SeqV.c3.cVal.mag.f Measured value Absolute value
MSQI1.SeqV.c3.units.SIUnit 29 V (Volt)
MSQI1.SeqV.c3.units.multiplier 3 Kilo
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
240 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.19.9 Power Metering (MMTR1)
MMTR1.Mod
MMTR1.Health
MMTR1.SupWh
No. Information
51 Device is Operational and Protecting (Device OK) 1 0
MMTR1.Mod.stVal 1 5
device annunciati on : 1 - ON IEC Status Mod.stVal : 1 - ON
0 - OFF 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
MMTR1.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information Value
924 Wp Forward (Wp+=) MMTR1.SupWh.actVal Metered value Current value of acummulated
interrupted current =
actVal × pulsQty
MMTR1.SupWh.units.SIUnit 72 Wh
MMTR1.SupWh.units.multiplier 9 Giga
MMTR1.SupWh.pulsQty 1.154700e-005 Wh / Metered value
Mapping
3.19 Measurements (MMXUx, MSQI1, MMTR1)
241SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
MMTR1.SupVArh
MMTR1.DmdWh
MMTR1.DmdVArh
No. Information Value
925 Wq Forward (Wq+=) MMT R1.SupVArh.actVal Metered value Current value of acummulated
interrupted current =
actVal × pulsQty
MMTR1.SupVArh.units.SIUnit 73 VArh
MMTR1.SupVArh.units.multiplier 9 Giga
MMTR1.SupVArh.pulsQty 1.154700e-005 VArh / Metered value
No. Information Value
928 Wp Reverse (Wp-=) MMTR1.DmdWh.actVal Metered value Current value of acummulated
interrupted current =
actVal × pulsQty
MMTR1.DmdWh.units.SIUnit 72 Wh
MMTR1.DmdWh.units.multiplier 9 Giga
MMTR1.DmdWh.pulsQty 1.154700e-005 Wh / Metered value
No. Information Value
929 Wq Reverse (Wq-=) MMTR1.DmdVArh.actVal Metered value Current value of acummulated
interrupted current =
actVal × pulsQty
MMTR1.DmdVArh.units.SIUnit 73 VArh
MMTR1.DmdVArh.units.multiplier 9 Giga
MMTR1.DmdVArh.pulsQty 1.154700e-005 VArh / Metered value
Mapping
3.20 Oscillographic Fault Records (RDRE1)
242 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
3.20 Oscillographic Fault Records (RDRE1)
RDRE1.Mod
RDRE1.Health
RDRE1.RcdMade
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
RDRE1.Mod.stVal 5 1
device annunciati on : 1 - ON IEC Status Mod.stVal : 1 - ON
0 - OFF 2 - BLOCKED
3 - TEST
4 - TEST/BLOCKED
5 - OFF
No. Information
51 Device is Operational and Protecting (Device OK) 0 1
RDRE1.Health.stVal 3 1
device annunciation : 1 - ON IEC Status Health.stVal: 1 - OK
0 - OFF 2 - WARNING
3 - ALARM
No. Information
30053 Fault recording is running (Fault rec. run.) 0 1
RDRE1.RcdMade.stVal 1 0
device annunciation: 1 - ON IEC Status RcdMade.stVal: 0 - FALSE
0 - OFF 1 - TRUE
(Recording complete)
Mapping
3.20 Oscillographic Fault Records (RDRE1)
243SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
RDRE1.FltNum
RDRE1.GriFltNum
RDRE1.RcdStr
No. Information Value
302 Fault Event (Fa ult Event) RDRE1.FltNum.stVal Present fault number
No. Information Value
301 Power System fault (Pow.Sys.Flt.) RDRE1.GriFltNum.stVal Network fault number
No. Information
30053 Fault recording is running (Fault rec. run.) 0 1
RDRE1.RcdStr.stVal 0 1
device annunciation: 1 - ON IEC Status RcdStr.stVal: 0 - FALSE
0 - OFF 1 - TRUE
Mapping
3.20 Oscillographic Fault Records (RDRE1)
244 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
245SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
Literature
/1/ SIPROTEC 4 Ethernet M odule EN 100 IEC 61850 Electrical/optical Interface
100 MBit, Manual
C53000-G1176-C167
/2/ SIPROTEC 4 System Des crip tio n
E50417-H1176-C151
/3/ SIPROTEC DIGSI, StartUP
E50417-G1176-C152
/4/ DIGSI CFC, Manual
E50417-H1176-C098
/5/ SIPROTEC SIGRA 4, Manual
E50417-H1176-C1100-C070
/6/ SIPROTEC Distance Protection 7SA6, Manual
C53000-G1176-C156
/7/ SIPROTEC Distance Protection 7SA522, Manual
C53000-G1176-C155
/8/ SIPROTEC Line Differential Protection with Distance Protection 7SD5, Manual
C5300-G1176-C169
/9/ SIPROTEC Differential Protection 7SD610, Manual
C5300-G1176-C145
/10/ SIPROTEC Breaker Management Relay7VK61, Manual
C5300-G1176-C159
246 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C186-3, Edition 11.2007
247SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C1863, Edition 11.2007
Index
C
CALH1 34, 57, 213
ErrBoard1 214
ErrBoard2 214
ErrBoard3 214
ErrBoard4 214
ErrBoard5 215
ErrBoard6 215
ErrBoard7 215
GrAlm 213
GrWrn 213
Health 213
Mod 213
D
DAI 33
DOI 33
F
Function parameters 34
Functional Scope
7SA522 39
7SA6 35
7SD5 43
7SD610 48
7VK61 51
L
LD CTRL (Control) 34, 57
DR (Disturbance Recorder) 34
DR (Disturbance recorder) 57
EXT (Extended) 57
Logical Device 32
MEAS (Measurement) 34, 56
PROT (Protection) 34, 54
LLN0 32, 34, 54, 56, 57
Beh 58, 59
Mod 58, 59
Logical Node 33, 35, 39, 43, 48, 51, 54
LPHD1 32, 34, 56, 57, 212
DevStr 212
PhyHealth 212
Proxy 212
M
MMTR1 34, 56, 240
DmdVArh 241
DmdWh 241
Health 240
Mod 240
SupVArh 241
SupWh 240
MMXU1 34, 56, 216
Health 216
Hz 217
Mod 216
PhV 219
PPV 218
TotPF 217
TotVA 217
TotVAr 217
TotW 217
MMXU2 46, 47, 50, 220
A 221
Health 220
Mod 220
PhV 222
Relld 220
MMXU3 47, 50, 223
A 224
Health 223
Mod 223
PhV 225
Relld 223
MMXU4 47, 226
A 227
Health 226
Mod 226
PhV 228
Relld 226
MMXU5 47, 229
A 230
Health 229
Mod 229
PhV 231
Relld 229
MMXU6 47, 232
A 233
Health 232
Mod 232
PhV 234
Relld 232
MMXU7 46, 47, 235
A 236
Health 235
248 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C1863, Edition 11.2007
Mod 235
PhV 237
Relld 235
MSQI1 34, 56, 238
Health 238
Mod 238
SeqA 239
SeqV 239
P
PDIF1 43, 48, 54, 64
Health 64
Mod 64
Op 65
Str 64
PDIF2 65
Health 65
Mod 65
Op 66
Str 66
PDIF3 46, 50, 135
DifAClc 136
Health 135
Mod 135
Op 136
Str 136
Str.dirGeneral 136
PDIS1 39, 43, 54, 74
Health 74
Mod 74
Op 77
Op.phsA 77
Op.phsB 77
Op.phsC 78
Str 75
Str.dirGeneral 76
StrAB 79
StrAG 78
StrBC 79
StrBG 78
StrCA 79
StrCG 78
PDIS10 80
Health 80
Mod 80
Op 83
Op.phsA 83
Op.phsB 83
Op.phsC 84
Str 81
Str.dirGeneral 82
StrAB 85
StrAG 84
StrBC 85
StrBG 84
StrCA 85
StrCG 84
PDIS2 54, 86
Health 86
Mod 86
Op 87
Op.phsA 87
Op.phsB 88
Op.phsC 88
Str 86
Str.dirGeneral 87
PDIS3 89
Health 89
Mod 89
Op 90
Op.phsA 91
OP.phsB 91
OP.phsC 91
Str 90
Str.dirGeneral 90
PDIS4 92
Health 92
Mod 92
Op 93
Op.phsA 94
Op.phsB 94
Op.phsC 94
Str 92
Str.dirGeneral 93
PDIS5 95
Health 95
Mod 95
Op 96
Op.phsA 97
Op.phsB 97
Op.phsC 97
Str 95
Str.dirGeneral 96
PSCH1 35, 39, 44, 54, 116
Echo 120
GrdRx 122
Health 116
LosOfGrd 120
Mod 116
Op 118
Op.CarRx 120
Op.phsA 119
Op.phsB 119
Op.phsC 119
ProRx 117
ProTx 116
RvABlk 122
Str 117
Str.phsA 117
Str.phsB 117
Str.phsC 118
WeiOp.general 121
WeiOp.phsA 121
WeiOp.phsB 121
WeiOp.phsC 121
PSDE1 36, 131
249SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C1863, Edition 11.2007
Health 131
Mod 131
Op 134
Str 131
Str.dirGeneral 132
Str.dirPhsA 132
Str.dirPhsB 133
Str.dirPhsC 134
Str.phsA 132
Str.phsB 133
Str.phsC 133
PTOC1 36, 55, 137
Health 137
Mod 137
Op 138
Str 137
PTOC10 55, 145
Health 145
Mod 145
Op 146
Str 146
Str.dirGeneral 146
PTOC2 40, 44, 48, 51, 55, 138
Health 138
Mod 138
Op 139
Str 139
PTOC3 36, 139
Health 140
Mod 139
Op 140
Str 140
PTOC4 141
Health 141
Mod 141
Op 142
Str 142
PTOC5 36, 40, 44, 55, 123
Health 123
Mod 123
Op 124
Str 123
Str.dirGeneral 124
PTOC6 125
Health 125
Mod 125
Op 126
Str 125
Str.dirGeneral 126
PTOC7 127
Health 127
Mod 127
Op 128
Str 127
Str.dirGeneral 128
PTOC8 129
Health 129
Mod 129
Op 130
Str 129
Str.dirGeneral 130
PTOC9 55, 143
Health 143
Mod 143
Op 144
Str 144
Str.dirGeneral 144
PTOF1 37, 41, 45, 49, 55, 184
Health 184
Mod 184
Op 185
Str 185
PTOF2 186
Health 186
Mod 186
Op 187
Str 187
PTOF3 188
Health 188
Mod 188
Op 189
Str 189
PTOF4 190
Health 190
Mod 190
Op 191
Str 191
PTOV1 37, 41, 45, 49, 52, 55, 162
Health 162
Mod 162
Op 163
Str 162
Str.phsA 163
Str.phsB 163
Str.phsC 163
PTOV10 175
Health 175
Mod 175
Op 175
Str 175
PTOV2 164
Health 164
Mod 164
Op 165
Str 164
Str.phsA 165
Str.phsB 165
Str.phsC 165
PTOV3 166
Health 166
Mod 166
Op 167
Str 166
Str.phsA 167
Str.phsB 167
Str.phsC 167
PTOV4 168
Health 168
250 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C1863, Edition 11.2007
Mod 168
Op 169
Str 168
Str.phsA 169
Str.phsB 169
Str.phsC 169
PTOV5 170
Health 170
Mod 170
Op 170
Str 170
PTOV6 171
Health 171
Mod 171
Op 171
Str 171
PTOV7 172
Health 172
Mod 172
Op 172
Str 172
PTOV8 173
Health 173
Mod 173
Op 173
Str 173
PTOV9 174
Health 174
Mod 174
Op 174
Str 174
PTRC1 208
FinTr 211
Health 208
Mod 208
Str 208
Str.dirGeneral 209
Str.neut 210
Str.phsA 209
Str.phsB 209
Str.phsC 209
Tr.dirGeneral 210
Tr.phsA 210
Tr.phsB 210
Tr.phsC 211
PTRC2 34, 35, 39, 43, 54, 98
Health 98
Mod 98
Op 101
Op.phsA 102
Op.phsB 102
Op.phsC 102
Str 98
Str.dirGeneral 99
Str.dirPhsA 99
Str.dirPhsB 100
Str.dirPhsC 101
Str.neut 101
Str.phsA 99, 100, 101
Str.phsB 100, 101
Str.phsC 101
PTRC3 54, 67
Health 67
Mod 67
Op 69
Op.phsA 70
Op.phsB 70
Op.phsC 70
Str 67
Str.dirGeneral 68
Str.dirNeut 69
Str.dirPhsA 68
Str.dirPhsB 68
Str.dirPhsC 69
Str.neut 69
Str.phsA 68
Str.phsB 68
Str.phsC 69
StrA 70
StrAB 72
StrABC 72
StrABCG 73
StrABG 73
StrAG 71
StrB 71
StrBC 72
StrBCG 73
StrBG 71
StrC 71
StrCA 72
StrCAG 73
StrCG 71
PTTR1 38, 46, 50, 55, 196
AlmThm 197
Health 196
Mod 196
Op 196
Str 196
PTUF1 37, 41, 45, 49, 55, 176
Health 176
Mod 176
Op 177
Str 177
PTUF2 178
Health 178
Mod 178
Op 179
Str 179
PTUF3 180
Health 180
Mod 180
Op 181
Str 181
PTUF4 182
Health 182
Mod 182
Op 183
Str 183
251SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C1863, Edition 11.2007
PTUV1 37, 41, 45, 49, 52, 55, 152
Health 152
Mod 152
Op 153
Str 152
Str.phsA 153
Str.phsB 153
Str.phsC 153
PTUV2 154
Health 154
Mod 154
Op 155
Str 154
Str.phsA 155
Str.phsB 155
Str.phsC 155
PTUV3 156
Health 156
Mod 156
Op 157
Str 156
Str.phsA 157
Str.phsB 157
Str.phsC 157
PTUV4 158
Health 158
Mod 158
Op 159
Str 158
Str.phsA 159
Str.phsB 159
Str.phsC 159
PTUV5 160
Health 160
Mod 160
Op 160
Str 160
PTUV6 161
Health 161
Mod 161
Op 161
Str 161
R
RBRF1 38, 41, 46, 49, 52, 55, 194
Health 194
Mod 194
OpEx 194
OpIn 195
OpIn.phsA 195
OpIn.phsB 195
OpIn.phsC 195
Str 194
RDRE1 35, 39, 43, 48, 51, 57, 242
FltNum 243
GriFltNum 243
Health 242
Mod 242
RcdMade 242, 243
RcdStr 243
RFLO1 37, 41, 45, 55, 192
FltDiskm 193
FltDisPrc 193
FltZ 193
Health 192
Mod 192
RPSB1 35, 39, 43, 54, 103
BlkZn 104
Health 103
Mod 103
Str 103
Str.phsA 104
Str.phsB 104
Str.phsC 104
RPSB10 105
BlkZn 106
Health 105
Mod 105
Str 105
Str.phsA 106
Str.phsB 106
Str.phsC 106
RPSB2 107
BlkZn 108
Health 107
Mod 107
Str 107
Str.phsA 108
Str.phsB 108
Str.phsC 108
RPSB3 109
BlkZn 110
Health 109
Mod 109
Str 109
Str.phsA 110
Str.phsB 110
Str.phsC 110
RPSB4 111
BlkZn 112
Health 111
Mod 111
Str 111
Str.phsA 112
Str.phsB 112
Str.phsC 112
RPSB5 113
BlkZn 114
Health 113
Mod 113
Str 113
Str.phsA 114
Str.phsB 114
Str.phsC 114
RPSB6 54, 115
Health 115
Mod 115
Op 115
252 SIPROTEC, 7SD/7SA/7VK, PIXIT
C53000-G1176-C1863, Edition 11.2007
RREC1 37, 40, 45, 49, 52, 56, 57, 147
AutoRecSt 148
Health 147
Mod 147
Op 148
RSYN1 37, 41, 45, 52, 55, 149
AngInd 150
DifAngCIc 151
DifHzCIc 151
DifVCIc 152
Health 149
HzInd 150
Mod 149
Rel 149
SynPrg 150
VInd 150
X
XCBR1 35, 39, 43, 48, 51, 56, 198
BlkCls 199
BlkOpn 199
CirSpv 199
Health 198
Loc 198
Mod 198
OpCnt 198
Pos 199
SumSwAR1s 200
SumSwAR2s 200
SumSwAR3s 200
XCBR2 35, 39, 43, 48, 51, 56, 201
BlkCls 202
BlkOpn 202
CirSpv 202
Health 201
Loc 201
Mod 201
OpCnt 201
Pos 202
SumSwARs 203
XCBR3 35, 39, 43, 48, 51, 203
BlkCls 204
BlkOpn 204
CirSpv 204
Health 203
Loc 203
Mod 203
OpCnt 204
Pos 204
SumSwARs 205
XCBR4 205
BlkCls 206
BlkOpn 206
CirSpv 206
Health 205
Loc 205
Mod 205
OpCnt 206
Pos 206
SumSwARs 207
