RoHS 6 Compliant
Telecom - Power Cross Protection & Ballast Protection
RJS May2012D
Description
RJS Series, Telecom - Power Cross Protection & Ballast Protection Fuse
Electrical Characteristics (UL / CSA STD.248-14)
RJS Fuses are primarily intended for use in
telecommunication circuit applications requiring low current
protection with high surge tolerance. They are typically used
to replace heat coil type devices. They are designed to be
placed between the line input and the surge arresting
components (mov. gas tube, zenor diode, air gaps, etc.)
These fuses will withstand transient surge currents
generated by lighting in accordance with the attached table.
fuses guard protected circuitry against sustained
fuses guard protected circuitry against sustained
overload or short circuit conditions. Such sustained overloads
may be generated by accidental contact between utility
cables and phone lines (power line cross).
RJS Fuse are primarily designed for use in
telecommunications circuits which require compliance with
the test requirements specified in UL/IEC 1950 / 60950 and
Telcordia GR 1089,Issue 3.
Power
Factor
Intended
Application
100mA - 5A / 125V AC @10,000A
AMPERE RANGE / VOLT @
I.R.ABILITY
SAFETY
AGENCY
SAFETY
AGENCY
CERTIFICATE
NUMBER
Safety Agency Approvals
- Axial lead surge resistant slow blow fuse
- Meet UL 60950 power cross requirements
- Designed for compliance with Telcordia GR-1089-CORE
- Designed to serve the requirements of a wide range of
telecommunication and networking equipment.
- RoHS6 compliant
- Halogen Free
- Leadfree
Ballast Protection
Telecom Protection
General Purpose /
Telecom Protection
0.7-0.8
Primary Protection
Resistive
Resistive
100mA - 5A / 350V AC @100A
100mA - 5A / 600V AC @60A
100mA - 5A / 125V AC @10,000A
100mA - 5A / 250V AC @200A
100mA - 5A / 125V AC @10,000A
100mA - 5A / 250V AC @200A
100mA - 5A / 350V AC @100A
100mA - 5A / 600V AC @100A
Resistive 100mA - 5A / 600V AC @100A
LR39772
E20624
Applications
- Fax machines
- Answering machines
- Telecommunication circuit
- Ballast Protection
LEAD FREE = Pb
HALOGEN FREE = HF
100mA - 5A / 600V AC @100A
100mA - 5A / 600V AC @60A
Specifications subject to change without notice
Website: www.belfuse.com
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 ‧Tel: 201-432-0463 ‧Fax: 201-432-9542 ‧E-Mail: belfuse@belf.com