14.0+0.2
0 6.0+0.2
0
6.0+0.2
0
1.0
1.0 4.0
1.0
1.0
1.0
2.0
2.5 4.0
1.5 0.5
2.0
0.5 Square
C
E
An
2.00
=
=
1.27
2.54
1.1 Min Wall
OPI 1000 Series
Optically Coupled Isolators
Surface Mount
BASEEFA CERTIFIED
The OPI 1000 A through E are a series
of Optically Coupled Isolators each
consisting of a Infrared emitter coupled
to a silicon photo transistor. The series is
designed for applications requiring high
voltage isolation between input & output.
•Surface Mount configuration in
Tape & Reel,
•10KV isolation,
•High Current Transfer ratio- 40%
min @ 1mA If,
•Designed and manufactured to
EN50020 1995 and EN50014
1998.
MECHANICAL DATA
BEDFORD OPTO TECHNOLOGY LTD
LINDSAYLANDS, BIGGAR,LANARKSHIRE, ML12 6NR
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009
9.8.01 ISS C
BASEEFA Certified
BAS No. Ex 95C2215UEExia IIC
CONDITIONS OF USE APPLY
EN50020 1994 CLAUSE 6.4.9
EN50014 1997 CLAUSE 8.8
1/5
BEDFORD OPTO TECHNOLOGY LTD
LINDSAYLANDS, BIGGAR,LANARKSHIRE, ML12 6NR
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009
Website: bot.co.uk E-mail: bill@bot.co.uk
ABSOLUTE MAXIMUM RATINGS (25OC unless otherwise noted)
INPUT DIODE
FORWARD DC CURRENT
REVERSE DC VOLTAGE
100mA
5 Volts
OUTPUT TRANSISTOR
COLLECTOR-EMITTER VOLTAGE
COLLECTOR CURRENT
35 Volts
15 mA
OPERATING TEMP -25OC TO +100OC
STORAGE TEMP -25OC TO +100OC
INPUT-TO-OUTPUT ISOLATION VOLTAGE + 10KV DC (i)
i) Measured with the input leads and output leads shorted together for one min.
ii) Thermal resistance 375 K/W
iii) Thermal resistance 450 K/W
Whilst the devices are capable of operating continually at the noted elevated temperatures users
should be aware of the possibility of a reduction in CTR over long periods at high temperatures
& currents.
Packing
Waffle Trays - 100 per tray 290mm x 200mm.
Tape & Reel - 400 Devices per 13” Diam Reel with 7” HuB
32mm Wide tape .
OPI 1000
9.8.01 ISS C
2/5
ADVISED SOLDERING CONDITIONS OPI 1000
BEDFORD OPTO TECHNOLOGY LTD
LINDSAYLANDS, BIGGAR,LANARKSHIRE, ML12 6NR
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009
9.8.01 ISS C
3/5
PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDI-
TIONS
INPUT DIODE
Forward Voltage VF - - 1.3 V If = 20mA
Reverse Voltage VR 5.0 - - V Ir = 100uA
OUTPUT TRANSISTOR
Collector-Emitter Breakdown Volt- BVceo 35 - - V Ic = 10 uA
Collector-Emitter Leakage Cur-
rent Iceo OPI1000E
OPI1000A -
10
nA
Vce = 30 V
Emitter-Collector Breakdown BVeco 5.0 - - V Ic = 100uA
COUPLED PAIR
DC Current Transfer Ratio IC/IF
OPI 1000 A - 25 - - % If = 10 mA Vce =
OPI 1000 B - 50 - - % If = 10 mA Vce =
OPI 1000 C - 100 - - % If = 10 mA Vce =
OPI 1000 E - 40 - - % If = 1mA
Isolation Voltage VISO 10 - - KV -
Collector-emitter saturation volt- VCE(SAT) - - 0.4 V If = 10 mA,
Turn-on time t on - 8 - uS Ic=2mA
Turn-off time t off - 8 - uS Vcc = 5V
OPTO ELECTRONIC DATA (TA = 25OC)
BEDFORD OPTO TECHNOLOGY LTD
LINDSAYLANDS, BIGGAR,LANARKSHIRE, ML12 6NR
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009
Website: bot.co.uk E-mail: bill@bot.co.uk
OPI
OPTO ELECTRONIC SOLUTIONS
9.8.01 ISS C
4/5
ESSENTIAL HEALTH AND SAFETY INFOR-
MATION IN ACCORDANCE WITH ATEX DI-
RECTIVE 94/9/EC
INFORMATION CONTAINED IN THIS DATASHEET IS
DEEMED TO CONFORM TO THE ABOVE DIRECTIVE
AND IS SUPPLIED IN RELATION TO THE FOLLOWING
SHIPMENT:-
CUSTOMER____________________
ORDER NUMBER________________
INVOICE NUMBER_______________
TYPE NUMBER__________________
QUANTITY______________________
BATCH NUMBER_________________
DATE CODE_____________________
DATE OF SHIPMENT______________
5/5
ISS C 9.8.01
