Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
NPCAPTM-PMASeries
・The new construction provides a low profile and high CV.
・Super low ESR, impedance, and high heat resistance characteristics have been secured
by using highly conductive polymer electrolytic materials.
・Compatible with digitalization and high frequencies of electrical equipment with superior
noise absorption.
・Excellent ESR characteristics, high ripple current, 5,000 hours at 105°C.
・Low-profile product lineup
・Outer coating: Flame-retardant epoxy resin UL94 V-0 or equivalent
・Non-solvent resistant type
・RoHS2 Compliant
・Halogen free products
・This product can’t be used for applications related to human life (such as in-vehicle equipment).
◆SPECIFICATIONS
Items Characteristics
Category
Temperature Range -55 to +105℃
Rated Voltage Range
16 to 25Vdc
Capacitance Tolerance
±20% (M) (at 20℃, 120Hz)
Surge Voltage Rated voltage×1.15 (at 105℃)
Leakage Current Shall not exceed values shown in STANDARD RATINGS. (at 20℃ after 2 minutes)
Dissipation Factor
(tanδ)0.12 max. (at 20℃, 120Hz)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Z(-25℃)/Z(+20℃)≦1.15
Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 5,000 hours
at 105℃.
Appearance No significant damage
Capacitance change ≦±20% of the initial value
D.F. (tanδ)≦200% of the initial specified value
ESR ≦200% of the initial specified value
Leakage current ≦The initial specified value
Damp Heat
(Steady State)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 60℃,
90 to 95% RH without voltage applied.
Appearance No significant damage
Capacitance change ≦-20 to +40% of the initial value
D.F. (tanδ)≦200% of the initial specified value
ESR ≦200% of the initial specified value
Leakage current ≦The initial specified value
Surge Voltage The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds
through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds.
Appearance No significant damage
Capacitance change ≦±20% of the initial value
D.F. (tanδ)≦200% of the initial specified value
ESR ≦200% of the initial specified value
Leakage current ≦The initial specified value
Failure Rate 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃)
*Note : If any doubt arises, measure the leakage current after the following voltage treatment.
Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃.
◆DIMENSIONS [mm]
L
A
W
B
P
C
Size code A B C L W P
F30 7.0±0.1 7.0±0.1 7.2±0.2 3.0 max. 1.2±0.2 2.65±0.2
Surface Mount
◆MARKING
EX）25V22µF
A358
E220
・Rated voltage symbol
Rated voltage
（Vdc）16 20 25
Symbol C D E
・Capacitance symbol
Capacitance code
（ex. 22μF：220）
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CAT. No. E1001S Ver.3
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
NPCAPTM-PMASeries
◆PART NUMBERING SYSTEM
Supplement code
Size code
Capacitance tolerance code
Taping code
Terminal code
Voltage code (ex. 20V:200, 25V:250)
Series code
Category
A P M A A R A M F 3 0 S
1 3 42 6 7 8 9 10 13125 18171611 1514
Please refer to "Product code guide (conductive polymer type)"
Capacitance code (ex. 22µF:220, 39µ
F:390)
◆STANDARD RATINGS
WV
(Vdc)
Cap
(µF)
Size
code
Leakage current
(µA max./after 2min.)
ESR
(mΩ max./20℃, 100k to 300kHz)
Rated ripple current
(mArms/105℃, 100kHz) Part No.
16 56 F30 448 40 2,200 APMA160ARA560MF30S
68 F30 544 50 2,000 APMA160ARA680MF30S
20 39 F30 390 45 2,100 APMA200ARA390MF30S
47 F30 470 50 2,000 APMA200ARA470MF30S
25 22 F30 275 50 2,000 APMA250ARA220MF30S
33 F30 412 50 2,000 APMA250ARA330MF30S
◆RATED RIPPLE CURRENT MULTIPLIERS
・Frequency Multipliers
Frequency(Hz) 120 1k 10k 50k 100k to 500k
SMD type 0.05 0.30 0.55 0.70 1.00
Surface Mount
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CAT. No. E1001S Ver.2
