AV3,AVM3/AVT3,AVL3 VDE NEW SUBMINIATURE SWITCHES WITH HIGH PRECISION AV (FS*FS-T) SWITCHES FEATURES FS * Consistent quality and high precision through sophisticated automatic fabrication system --O.P.: 8.40.3 mm (O.P.of conventional subminiature switches: 8.40.5) * Flux-resistant construction with integrally molded terminals * Solder terminal; Self-standing, internationally common pitch, right angle, left angle terminals for PC board; Quick connect .110 terminals for easy mounting * Insulation guard available for safety mounting FS-T * 2 lever pivot positions available for applications where low operating force is required TYPICAL APPLICATIONS * Communication equipment * Vending machines * Security systems * Data systems * Medical equipment * VCR RoHS compliant PC board thickness: 1.6 mm CONSTRUCTION (Example: AV3/AVM3 type) Standard version Long life version 2 lever pivot positions CONTACT ARRANGEMENT Arch-shaped independent spring Spring Solder-terminal Self-standing PC terminal .110 Quick connect terminal COM NO NC Flux resistant construction Optional insulation guard Remark: As for FS-T switches, the terminals are the different shape. Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e AECTB10E 201201-T AV3,AVM3/AVT3,AVL3 ORDERING INFORMATION 1.FS switches Ex. AV Type of switch AV3(FS) switch 2 0 2 Version Terminals Actuators 3: Standard 1: Solder terminal with guard 2: Solder terminal without guard 3: Solder terminal with opposite side guard 4: Self-standing PC terminal 5: Internationally common pitch PC terminal 6: Right angle terminal 7: Left angle terminal 8: .110 Quick-connect terminal 0: Pin plunger 1: Short hinge lever 2: Hinge lever 3: Long hinge lever 4: Simulated roller lever 5: Roller lever Ex. AV Type of switch AV3 (FS long life ver.) switch 3 M3 2 0 3 Operating force by pin plunger, max. 0: 0.25 N (Gold-clad contact only) 2: 0.49 N 4: 0.98 N 2 Version Terminals Actuators M3: Long life 1: Solder terminal with guard 2: Solder terminal without guard 3: Solder terminal with opposite side guard 4: Self-standing PC terminal 5: Internationally common pitch PC terminal 6: Right angle terminal 7: Left angle terminal 8: .110 Quick-connect terminal 0: Pin plunger 1: Short hinge lever 2: Hinge lever 3: Long hinge lever 4: Simulated roller lever 5: Roller lever Lever position Nil: Standard [11: forward] Contacts Nil: AgNi alloy 61: Gold-clad triple layer* International standard 3: UL/CSA/ VDE/ SEMKO 3 Operating force by pin plunger, max. 5: 1.47 N Lever position Nil: Standard [11: forward] Contacts Nil: AgNi alloy 61: Gold-clad triple layer* International standard 3: UL/CSA/ VDE/ SEMKO 2.FS-T switches Ex. AV Type of switch AVT3 (FS-T) switch 2 0 2 Version Terminals Actuators T3: Standard 2: Solder terminal 4: PC terminal 8: .110 Quick-connect terminal 0: Pin plunger 1: Short hinge lever 2: Hinge lever 3: Long hinge lever 4: Simulated roller lever 5: Roller lever Ex. AV Type of switch AVL3 (FS-T long life ver.) switch T3 L3 2 0 2 Version Terminals Actuators L3: Long life 2: Solder terminal 4: PC terminal 8: .110 Quick-connect terminal 0: Pin plunger 1: Short hinge lever 2: Hinge lever 3: Long hinge lever 4: Simulated roller lever 5: Roller lever 3 Operating force by pin plunger, max. 0: 0.25 N (Gold-clad contact only) 2: 0.49 N 4: 0.98 N Lever position Nil: Standard [11: forward] Contacts Nil: AgNi alloy (Not applicable to 0.25 N type) 61: Gold-clad triple layer* Agency standard 3: UL/CSA/ VDE/ SEMKO 3 Operating force by pin plunger, max. 5: 1.47 N Lever position Nil: Standard [11: forward] Contacts Nil: AgNi alloy (Not applicable to 0.25 N type) 61: Gold-clad triple layer* Agency standard 3: UL/CSA/ VDE/ SEMKO * Gold-clad triple layer contact Au CuNi AECTB10E 201201-T AgNi Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e AV3,AVM3/AVT3,AVL3 APPLICABLE CURRENT RANGE Type O.F. Rating Contact 1mA 100mA 3A 5A 0.25 N 0.49 N 0.98 N 1.47 N Silver alloy contact Standard version Gold-clad triple layer contact type Silver alloy contact Long life version Gold-clad triple layer contact type Remark: For high capacity contact rating up to 10.1 A, please refer to PS (AVM3P) switches catalog. PRODUCT TYPES 1. FS switches (In-line terminal type) Standard type Operating force, Max. Actuator Part No. Self-standing solder terminal Without guard Pin plunger Short hinge lever Hinge lever AgNi alloy contact type Long hinge lever Simulated roller lever Roller lever Pin plunger Short hinge lever Gold-clad triple layer contact type Hinge lever Long hinge lever Simulated roller lever Roller lever Panasonic Corporation With guard 0.49N 0.98N 0.20N 0.39N AV32023 AV32043 AV32123 AV32143 AV31023 AV31043 AV31123 AV31143 0.16N 0.34N 0.12N 0.25N 0.16N 0.34N 0.20N 0.39N 0.25N 0.49N 0.98N 0.098N 0.20N 0.39N 0.078N 0.16N 0.34N 0.12N 0.25N 0.16N 0.34N 0.20N 0.39N AV32223 AV32243 AV32323 AV32343 AV32423 AV32443 AV32523 AV32543 AV3200613 AV3202613 AV3204613 AV3210613 AV3212613 AV3214613 AV3220613 AV3222613 AV3224613 AV3232613 AV3234613 AV3242613 AV3244613 AV3252613 AV3254613 AV31223 AV31243 AV31323 AV31343 AV31423 AV31443 AV31523 AV31543 AV3100613 AV3102613 AV3104613 AV3110613 AV3112613 AV3114613 AV3120613 AV3122613 AV3124613 AV3132613 AV3134613 AV3142613 AV3144613 AV3152613 AV3154613 Automation Controls Business Unit With opposite side guard AV33023 AV33043 AV33123 AV33143 AV33223 AV33243 AV33323 AV33343 AV33423 AV33443 AV33523 AV33543 AV3300613 AV3302613 AV3304613 AV3310613 AV3312613 AV3314613 AV3320613 AV3322613 AV3324613 AV3332613 AV3334613 AV3342613 AV3344613 AV3352613 AV3354613 Self-standing PC terminal Internationally common pitch PC terminal AV34023 AV34043 AV34123 AV34143 AV35023 AV35043 AV35123 AV35143 AV34223 AV34243 AV34323 AV34343 AV34423 AV34443 AV34523 AV34543 AV3400613 AV3402613 AV3404613 AV3410613 AV3412613 AV3414613 AV3420613 AV3422613 AV3424613 AV3432613 AV3434613 AV3442613 AV3444613 AV3452613 AV3454613 AV35223 AV35243 AV35323 AV35343 AV35423 AV35443 AV35523 AV35543 AV3500613 AV3502613 AV3504613 AV3510613 AV3512613 AV3514613 AV3520613 AV3522613 AV3524613 AV3532613 AV3534613 AV3542613 AV3544613 AV3552613 AV3554613 industrial.panasonic.com/ac/e AECTB10E 201201-T AV3,AVM3/AVT3,AVL3 Actuator Pin plunger Short hinge lever Hinge lever AgNi alloy contact type Long hinge lever Simulated roller lever Roller lever Pin plunger Short hinge lever Gold-clad triple layer contact type Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force, Max. 0.49N 0.98N 0.20N 0.39N 0.16N 0.34N 0.12N 0.25N 0.16N 0.34N 0.20N 0.39N 0.25N 0.49N 0.98N 0.098N 0.20N 0.39N 0.078N 0.16N 0.34N 0.12N 0.25N 0.16N 0.34N 0.20N 0.39N Right angle terminal AV36023 AV36043 AV36123 AV36143 AV36223 AV36243 AV36323 AV36343 AV36423 AV36443 AV36523 AV36543 AV3600613 AV3602613 AV3604613 AV3610613 AV3612613 AV3614613 AV3620613 AV3622613 AV3624613 AV3632613 AV3634613 AV3642613 AV3644613 AV3652613 AV3654613 Part No. Left angle terminal AV37023 AV37043 AV37123 AV37143 AV37223 AV37243 AV37323 AV37343 AV37423 AV37443 AV37523 AV37543 AV3700613 AV3702613 AV3704613 AV3710613 AV3712613 AV3714613 AV3720613 AV3722613 AV3724613 AV3732613 AV3734613 AV3742613 AV3744613 AV3752613 AV3754613 .110 Quick-connect AV38023 AV38043 AV38123 AV38143 AV38223 AV38243 AV38323 AV38343 AV38423 AV38443 AV38523 AV38543 AV3800613 AV3802613 AV3804613 AV3810613 AV3812613 AV3814613 AV3820613 AV3822613 AV3824613 AV3832613 AV3834613 AV3842613 AV3844613 AV3852613 AV3854613 Remark: When ordering, please refer to "Remarks" of ordering information. AECTB10E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e AV3,AVM3/AVT3,AVL3 2. FS-T switches (Cross-line terminal type) Standard type Operating force, Max. Actuator Pin plunger Short hinge lever Hinge lever AgNi alloy contact type Long hinge lever Simulated roller lever Roller lever Pin plunger Short hinge lever Gold-clad triple layer contact type Hinge lever Long hinge lever Simulated roller lever Roller lever Panasonic Corporation Part No. Solder terminal without guard PC terminal 0.49N 0.98N 0.20N 0.39N 0.16N 0.34N 0.12N 0.25N 0.16N AVT32023 AVT32043 AVT32123 AVT32143 AVT32223 AVT32243 AVT32323 AVT32343 AVT32423 AVT34023 AVT34043 AVT34123 AVT34143 AVT34223 AVT34243 AVT34323 AVT34343 AVT34423 0.34N 0.20N 0.39N 0.25N 0.49N 0.98N 0.098N 0.20N 0.39N 0.078N 0.16N 0.34N 0.12N 0.25N 0.16N 0.34N 0.20N 0.39N AVT32443 AVT32523 AVT32543 AVT3200613 AVT3202613 AVT3204613 AVT3210613 AVT3212613 AVT3214613 AVT3220613 AVT3222613 AVT3224613 AVT3232613 AVT3234613 AVT3242613 AVT3244613 AVT3252613 AVT3254613 AVT34443 AVT34523 AVT34543 AVT3400613 AVT3402613 AVT3404613 AVT3410613 AVT3412613 AVT3414613 AVT3420613 AVT3422613 AVT3424613 AVT3432613 AVT3434613 AVT3442613 AVT3444613 AVT3452613 AVT3454613 Automation Controls Business Unit industrial.panasonic.com/ac/e .110 Quick-connect terminal AVT38023 AVT38043 AVT38123 AVT38143 AVT38223 AVT38243 AVT38323 AVT38343 AVT38423 AVT38443 AVT38523 AVT38543 AVT3800613 AVT3802613 AVT3804613 AVT3810613 AVT3812613 AVT3814613 AVT3820613 AVT3822613 AVT3824613 AVT3832613 AVT3834613 AVT3842613 AVT3844613 AVT3852613 AVT3854613 AECTB10E 201201-T AV3,AVM3/AVT3,AVL3 3. FS switches (In-line terminal type) Long life version Actuator AgNi alloy contact type Gold-clad triple layer contact type AgNi alloy contact type Gold-clad triple layer contact type Operating force, Max. Part No. Self-standing solder terminal Without guard With guard With opposite side guard Self-standing PC terminal Internationally common pitch PC terminal Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Pin plunger Short hinge lever Hinge lever 1.47N 0.59N 0.54N 0.44N 0.54N 0.59N 1.47N 0.59N 0.54N AVM32053 AVM32153 AVM32253 AVM32353 AVM32453 AVM32553 AVM3205613 AVM3215613 AVM3225613 AVM31053 AVM31153 AVM31253 AVM31353 AVM31453 AVM31553 AVM3105613 AVM3115613 AVM3125613 AVM33053 AVM33153 AVM33253 AVM33353 AVM33453 AVM33553 AVM3305613 AVM3315613 AVM3325613 AVM34053 AVM34153 AVM34253 AVM34353 AVM34453 AVM34553 AVM3405613 AVM3415613 AVM3425613 AVM35053 AVM35153 AVM35253 AVM35353 AVM35453 AVM35553 AVM3505613 AVM3515613 AVM3525613 Long hinge lever Simulated roller lever Roller lever 0.44N 0.54N 0.59N AVM3235613 AVM3245613 AVM3255613 AVM3135613 AVM3145613 AVM3155613 AVM3335613 AVM3345613 AVM3355613 AVM3435613 AVM3445613 AVM3455613 AVM3535613 AVM3545613 AVM3555613 Actuator Operating force, Max. Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever 1.47N 0.59N 0.54N 0.44N 0.54N 0.59N 1.47N 0.59N 0.54N 0.44N 0.54N 0.59N Right angle terminal Without guard AVM36053 AVM36153 AVM36253 AVM36353 AVM36453 AVM36553 AVM3605613 AVM3615613 AVM3625613 AVM3635613 AVM3645613 AVM3655613 Part No. Left angle terminal With guard AVM37053 AVM37153 AVM37253 AVM37353 AVM37453 AVM37553 AVM3705613 AVM3715613 AVM3725613 AVM3735613 AVM3745613 AVM3755613 .110 Quick-connect With opposite side guard AVM38053 AVM38153 AVM38253 AVM38353 AVM38453 AVM38553 AVM3805613 AVM3815613 AVM3825613 AVM3835613 AVM3845613 AVM3855613 Remark: When ordering, please refer to "Remarks" of ordering information. 4. FS-T switches (Cross-line terminal type) Long life version AgNi alloy contact type Gold-clad triple layer contact type Actuator Operating force, Max. Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever 1.47N 0.59N 0.54N 0.44N 0.54N 0.59N 1.47N 0.59N 0.54N 0.44N 0.54N 0.59N Part No. Solder terminal Without guard PC terminal AVL32053 AVL32153 AVL32253 AVL32353 AVL32453 AVL32553 AVL3205613 AVL3215613 AVL3225613 AVL3235613 AVL3245613 AVL3255613 AVL34053 AVL34153 AVL34253 AVL34353 AVL34453 AVL34553 AVL3405613 AVL3415613 AVL3425613 AVL3435613 AVL3445613 AVL3455613 .110 Quick-connect terminal AVL38053 AVL38153 AVL38253 AVL38353 AVL38453 AVL38553 AVL3805613 AVL3815613 AVL3825613 AVL3835613 AVL3845613 AVL3855613 Remark: When ordering, please refer to "Remarks" of ordering information. AECTB10E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e AV3,AVM3/AVT3,AVL3 SPECIFICATIONS 1.Contact rating Standard version AgNi alloy contact type Voltage Inductive load (cos]0.6-0.7) 2A 2A 2A 0.05A Resistive load (cos]1) 3A 3A 3A 0.4A 125V AC 250V AC 30V DC 125V DC Long life version Gold-clad contact type Triple layer Resistive load (cos]1) 0.1A 0.1A 0.1A -- AgNi alloy contact type Resistive load (cos]1) 5A 5A 5A 0.4A Inductive load (cos]0.6-0.7) 3A 3A 3A 0.05A Gold-clad contact type Triple layer Resistive load (cos]1) 0.1A 0.1A 0.1A -- Remark: Time constant shall be less than 7 msec. for DC inductive loads. 2.Characteristics Standard version AgNi alloy contact type Gold-clad contact type 5 x 104 at 20 cpm 2 x 105 at 20 cpm Long life version AgNi alloy contact type Gold-clad contact type 5 x 104 at 20 cpm 2 x 105 at 20 cpm 7 3 x 10 (O.T.: Specified value) 5 x 105 at 60 cpm (O.T.max.) 107 (O.T.max.) at 60 cpm Min.100M at 500V DC Electrical life at rated load (O.T.max.) Mechanical life Insulation resistance Dielectric strength Between non-continuous terminals Between each terminal and other exposed metal parts Between each terminal and ground Vibration resistance (Pin plunger type) 1,000 Vrms 1,500 Vrms 1,500 Vrms 10 to 55 Hz at single amplitude of 1.5mm (Contact opening: max.1 msec.) 294 m/s2 min. (O.F. 0.98 N) 294 m/s2 min. (O.F. 0.98 N) 147 m/s2 min. 294 m/s2 min. 147 m/s2 min. (O.F. 0.49 N) (O.F. 0.49 N) 49 m/s2 min. (O.F. 0.25 N) 50 m max. 100 m max. Au: 50 m max. (by voltage drop 0.1 A 6 to 8V DC) (by voltage drop 1 A (by voltage drop 0.1 A Ag: 50 m max. (by voltage drop 1 A 6 to 8V DC) 6 to 8V DC) 6 to 8V DC) Shock resistance (Pin plunger type) (Contact opening: less than 1 msec.) Contact resistance (Initial) Allowable operating speed Max.operating cycle rate Ambient temeprature Unit weight 0.1 to 1,000 mm/sec. 300 cpm -25C to +85C (no freezing below 0C) Approx.2g 3.Operating characteristics 1) Pin plunger 4th digit number of Part No. O.F.max. R.F.min. 0 0.25N 0.020N 2 0.49N 0.074N 4 0.98N 0.15N 5 1.47N 0.20N P.T.max. M.D.max. O.T.max. 0.6mm 0.1mm 0.4mm P.T.max. M.D.max. O.T.max. 2.5mm 0.5mm 0.8mm O.P. Distance from mounting holes: 8.40.3mm Distance from stand-off: FS 11.80.4mm FS-T 11.70.4mm 2) Short hinge lever 4th digit number of Part No. O.F.max. R.F.min. 0 0.098N 0.004N 2 0.20N 0.017N 4 0.39N 0.034N 5 0.59N 0.039N Panasonic Corporation Automation Controls Business Unit O.P. Distance from mounting holes: 8.80.8mm Distance from stand-off: FS 12.20.9mm FS-T 12.10.9mm industrial.panasonic.com/ac/e AECTB10E 201201-T AV3,AVM3/AVT3,AVL3 3) Hinge lever 4th digit number of Part No. O.F.max. R.F.min. 0 0.078N 0.003N 2 0.16N 0.015N 4 0.34N 0.029N 5 0.54N 0.034N P.T.max. M.D.max. O.T.max. 2.8mm 0.8mm 1.2mm P.T.max. M.D.max. O.T.max. 3.5mm 1.0mm 1.6mm P.T.max. M.D.max. O.T.max. 2.8mm 0.8mm 1.2mm P.T.max. M.D.max. O.T.max. O.P. Distance from mounting holes: 8.80.8mm Distance from stand-off: FS 12.20.9mm FS-T 12.10.9mm 4) Long hinge lever 4th digit number of Part No. O.F.max. R.F.min. 0 -- -- 2 0.12N 0.012N 4 0.25N 0.025N 5 0.44N 0.029N O.P. Distance from mounting holes: 8.81.2mm Distance from stand-off: FS 12.21.3mm FS-T 12.11.3mm 5) Simulated roller lever 4th digit number of Part No. O.F.max. R.F.min. 0 -- -- 2 0.16N 0.015N 4 0.34N 0.029N 5 0.54N 0.034N 4th digit number of Part No. O.F.max. R.F.min. 0 -- -- 2 0.20N 0.017N 4 0.39N 0.034N 5 0.59N 0.039N O.P. Distance from mounting holes: 11.650.8mm Distance from stand-off: FS 15.050.9mm FS-T 14.950.9mm 6) Roller lever 2.5mm DIMENSIONS 0.5mm The CAD data of the products with a Distance from mounting holes: 14.50.8mm Distance from stand-off: FS 17.90.9mm FS-T 17.80.9mm 0.8mm CAD Data O.P. mark can be downloaded from: http://industrial.panasonic.com/ac/e mm General tolerance: 0.25 1. FS switches (In-line terminal type) 1-(1) Solder terminal (without guard) CAD Data 4.0 1.85 0.2 3.4 1.1 0.12 0.15 NO C NC 1.5 0.12 7.4 8.7 0.15 15.4 2.8 0.2 0.5 1.25 0.1 0.15 19.8 0.3 5.2 6.4 0.2 Dimensions other than drawn above is same as self-standing PC board terminal. AECTB10E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e AV3,AVM3/AVT3,AVL3 mm General tolerance: 0.25 1-(2) Solder terminal (with guard) CAD Data NO C NC 8.0 24.0 Dimensions other than drawn above is same as guardless type. 1-(3) Solder terminal (with opposite side guard) CAD Data 8.0 24.0 Dimensions other than drawn above is same as guardless type. 1-(4) Self-standing PC terminal Pin plunger PC board pattern CAD Data 7.6 0.3 (P.T.) 0.6 max. 1.8 3-1.20.05 dia. 4.0 8.70.1 7.7 2.4 +0.1 -0.05 NO C 7.4 15.40.1 (O.P.) 6.7 8.4 0.3 (O.P.) 11.8 0.4 NC 1.85 0.2 1.1 0.12 3.4 0.15 2.4 2.4 +0.1 -0.05 dia. 2.5 0.1 0.9 9.5 0.1 2.2 1.5 0.12 0.5 1.250.1 8.7 0.15 5.2 2.2 0.1 15.4 0.15 19.8 0.3 6.4 0.2 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from standoff, mm 0.6 0.1 0.4 8.40.3 11.80.4 Short hinge lever CAD Data 12.85 5.0 0.4 (P.T.) 2.5 max. 4.0 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from standoff, mm (O.P.) 8.8 0.8 (O.P.) 12.2 0.9 6.6 C NO NC 2.5 0.5 0.8 8.80.8 12.20.9 Hinge lever CAD Data 7.15 0.4 (P.T.) 2.8 max. (O.P.) 8.8 0.8 (O.P.) 12.2 0.9 C Panasonic Corporation NO NC Automation Controls Business Unit 4.0 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from standoff, mm industrial.panasonic.com/ac/e 2.8 0.8 1.2 8.80.8 12.20.9 AECTB10E 201201-T AV3,AVM3/AVT3,AVL3 mm General tolerance: 0.25 Long hinge lever CAD Data 13.1 0.4 (P.T.) 3.5 max. 4.0 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from standoff, mm (O.P.) 8.8 1.2 (O.P.) 12.2 1.3 NO C NC 3.5 1.0 1.6 8.81.2 12.21.3 Simulated roller lever CAD Data (P.T.) 2.8 max. 6.3 0.4 4.0 R2.5 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from standoff, mm (O.P.) 11.65 0.8 (O.P.) 15.05 0.9 NO C NC 2.8 0.8 1.2 11.650.8 15.050.9 Roller lever CAD Data 3.2 (P.T.) 2.5 max. 5.15 0.4 5.0 dia. Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from standoff, mm (O.P.) 14.5 0.8 (O.P.) 17.9 0.9 NO C NC 2.5 0.5 0.8 14.50.8 17.90.9 1-(5) Internationally common pitch PC terminal CAD Data (P.T.) 0.6max. PC board pattern 4.0 3-1.50.05 dia. (O.P.) 8.40.3 (O.P.) 11.80.4 2.4 3.2 7.4 6-C0.3 7.620.1 7.620.1 3.40.15 (4.0) 1.3 0.5 7.620.1 7.620.1 19.80.3 1-(6) Right angle terminal CAD Data (P.T.) 0.6max. PC board pattern 4.0 3-1.50.05 dia. (O.P.) 8.40.3 7.620.1 7.620.1 2.4 5.080.2 3.40.15 R0.5 (2.8) (4.0) 6.4 0.5 7.620.1 7.620.1 19.80.3 AECTB10E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e AV3,AVM3/AVT3,AVL3 mm General tolerance: 0.25 1-(7) Left angle terminal CAD Data (P.T.) 0.6max. PC board pattern 4.0 3-1.50.05 dia. (O.P.) 8.40.3 7.620.1 7.620.1 2.4 5.080.2 3.40.15 0.5 (2.8) (4.0) R0.5 6.4 7.620.1 7.620.1 19.80.3 1-(8) .110 Quick-connect terminal CAD Data 4.0 NO C NC 3.4 0.15 7.1 0.15 11.0 3-1.2 5.5 0.1 0.05 2.5 0.1 6-C0.6 0.1 2.8 0.1 9.5 0.1 dia. 7.6 0.15 0 4.0 -0.15 15.2 0.15 0.5 5.2 6.4 0.2 19.8 0.3 Dimensions other than drawn above is same as self-standing PC board terminal. 2.FS-T switches (Cross-line terminal type) 2-(1) PC board terminal Pin plunger CAD Data PC board pattern (P.T.) 0.6 max. 7.6 0.3 7.7 +0.1 2.4 -0.05 3.3 NO C 3-1.35 to 1.50 dia. (O.P.) 8.4 0.3 6.7 2.4 4.0 10.9 (Button position) 8.80.1 0.1 NC 16.1 3.2 2.4 2.5 0.1 +0.1 -0.05 7.0 dia. 0.5 1.2 0.1 9.5 0.1 6.4 0.2 8.8 16.1 19.8 0.3 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from standoff, mm 0.6 0.1 0.4 8.40.3 11.70.4 Short hinge lever CAD Data 12.85 5.0 0.4 (P.T.) 2.5 max. (O.P.) 8.8 0.8 C Panasonic Corporation NO NC Automation Controls Business Unit 4.0 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from standoff, mm industrial.panasonic.com/ac/e 2.5 0.5 0.8 8.80.8 12.10.9 AECTB10E 201201-T AV3,AVM3/AVT3,AVL3 mm General tolerance: 0.25 Hinge lever CAD Data 12.85 (P.T.) 2.8 max. 7.15 0.4 4.0 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from standoff, mm (O.P.) 8.8 0.8 NO C NC 2.8 0.8 1.2 8.80.8 12.10.9 Long hinge lever CAD Data 13.1 0.4 (P.T.) 3.5 max. 4.0 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from standoff, mm (O.P.) 8.8 1.2 NO C NC 3.5 1.0 1.6 8.81.2 12.11.3 Simulated roller lever CAD Data (P.T.) 2.8 max. 6.3 0.4 R2.5 12.85 4.0 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from standoff, mm (O.P.) 11.65 0.8 NO C NC 2.8 0.8 1.2 11.650.8 14.950.9 Roller lever CAD Data (P.T.) 2.5 max. 5.15 0.4 3.2 5.0 dia. Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from standoff, mm (O.P.) 14.5 0.8 NO C NC 2.5 0.5 0.8 14.50.8 17.80.9 2-(2) Solder terminal CAD Data (P.T.) 0.6 max. 7.6 0.3 7.7 2.4 +0.1 -0.05 3.3 2.4 6.7 NO C 4.0 (O.P.) 8.4 0.3 1.8 NC (3.9) dia . 6.4 2.4 +0.1 -0.05 dia. 1.5 C 0. 3 0.5 9.5 0.1 6- 2.5 0.1 2.8 0.2 8.8 16.1 6.4 0.2 19.8 0.3 As for the dimensions of lever types, dimensions other than terminals are same as self-standing solder terminal. AECTB10E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e AV3,AVM3/AVT3,AVL3 mm General tolerance: 0.25 2-(3) .110 Quick-connect terminal CAD Data (P.T.) 0.6 max. 7.6 0.3 7.7 (O.P.) 6.7 8.4 0.3 +0.1 2.4 -0.05 3.3 2.4 4.0 NO C NC 2.4 +0.1 -0.05 dia. 5.5 0.1 2.5 0.1 9.5 0.1 0.5 1.2 0.05 dia. 2.8 0.1 8.8 11.0 7.1 0.15 6.4 0.2 16.1 19.8 0.3 As for the dimensions of lever types, dimensions other than terminals are same as self-standing solder terminal. NOTES 1.Regarding fastening of switch body In fastening the switch body, use flat filister head M2.3 screws, with tightening torque of not more than 0.29N*m.To prevent loosening of the screws, it is recommended that spring washers be used with the screws and adhesive be applied to lock the screws. After mounting the switch and making wiring connections, the insulation distance between ground and each terminal should be confirmed as sufficient. The positioning of the switch should be such that the pushbutton or actuator for the switch should not directly apply force to the operating section in the free condition.For a pushbutton, the force from the pushbutton should be applied in a perpendicular direction. In setting the movement after operation, the over-travel should be set not less than 70% as a standard.Setting the movement at less than 70% of O.T.may cause troubles such as mis-contact and welding due to small contact force of the switch. N.C. side Stroke Contact 0 force N.O. side 2.Soldering operation Manual soldering should be accomplished within 3 seconds with max. 350C iron. Care should be taken not to apply force to the terminals during soldering. Terminal portions must not be moved in min.1 minute after soldering.Also no tensile strength of lead wires should be applied to terminals. 3.Regarding connector connections (.110 quick connect terminals) For making connections, a dedicated receptacle for .110 quick connect terminals should be used, and the terminals should be inserted parallel to the receptacle.Consideration should be given to mounting so that no tensile load is applied to the lead wires. 4.In making the switch selection Consideration should be given to provide for no interference up to +20% variation of the standard characteristics values. 5.Environment Locations where corrosive gases having a bad influence on contacts are present, and locations where there is an excessive amount of siliceous or other abrasive dust should be avoided. 70% of O.T. specified value P.T. Usable area O.T. spedified value O.T. max. Panasonic Corporation Automation Controls Business Unit 6.Cautions regarding use This subminiature switch has been designed as a dedicated switch for AC use, but it can be used for low capacity DC circuits. Please select gold-clad contact types when loads are in the low-level area of 1mA up to 100mA and 5V up to 30V. 3A Ag 100 mA Au (-61) Triple layer contact type 1 mA 0 DC AC 5 5 15 30V 30 250V (Reference only) For switching of inductive loads (relays, solenoids, buzzers, etc.), in order to prevent damage to contacts due to the occurrence of arcing, an arc absorbing circuit should be applied 7.Quality check under Actual Loading Condition To assure reliability, check the switch under actual loading conditions.Avoid any situation that may adversely affect switching performance. 8.When using lever type switch, care should be taken not to apply undue force on the body from the opposite side or side ways to its operating direction. industrial.panasonic.com/ac/e AECTB10E 201201-T Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Panasonic: AVL32353 AVL32459 AVL3255619 AVL38159 AVL3825613 AVL3825643 AVL3835619 AVL38459 AVL38559 AVM3105619 AVM31059 AVM3115619 AVM31159 AVM3125619 AVM31259 AVM3135619 AVM3145619 AVM31459 AVM3155619 AVM31559 AVM3215619 AVM32159 AVM3225619 AVM32259 AVM3235719 AVM32359 AVM3245619 AVM32459 AVM3255619 AVM3305619 AVM33059 AVM3315619 AVM33159 AVM3325619 AVM33259 AVM3335619 AVM33359 AVM3345619 AVM33459 AVM3355619 AVM33559 AVM34058 AVM3415619 AVM34159 AVM3425619 AVM34259 AVM3435619 AVM3435649 AVM3445619 AVM34459 AVM3455619 AVM3515619 AVM35159 AVM3525619 AVM35259 AVM3535619 AVM35359 AVM3545619 AVM35459 AVM3555619 AVM35559 AVM3605619 AVM3605649 AVM36059 AVM36159 AVM3625619 AVM36259 AVM36359 AVM3645619 AVM36459 AVM3655619 AVM3705619 AVM37059 AVM3715619 AVM3725619 AVM37259 AVM3735619 AVM37359 AVM3745614 AVM3745619 AVM37459 AVM37559 AVM38053 AVM3805619 AVM3815619 AVM38159 AVM3825619 AVM38259 AVM3845619 AVM38459 AVM3855119 AVM3855619 AVM38559 AVT3204619 AVT322211619 AVT32229 AVT3234619 AVT3244619 AVT32449 AVT3252619