1
Copyright © 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0008824 Rev.3
www.everlight.com
SMD B
17-215/R6C-AQ1R2B/3T
Features
․
Package in 8mm tape on 7〞diameter reel.
․
Compatible with automatic placement equipment.
․
Compatible with infrared and vapor phase reflow solder process.
․
Mono-color type.
․
Pb-free.
․
The product itself will remain within RoHS compliant version.
Description
․
The 17-215 SMD LED is much smaller than lead frame type components, thus enable smaller board ize,
higher packing density, reduced storage space and finally smaller equipment to be obtained.
․
Besides, lightweight makes them ideal for miniature applications. etc.
Applicati
ons
․
Telecommunication: indicator and backlighting in telephone and fax.
․
Flat backlight for LCD, switch and symbol.
․
General use.
DATASHEET
SMD REFLECTOR
17-215/R6C-AQ1R2B/3T
2
Copyright © 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0008824 Rev.3
www.everlight.com
Device Selection Guide
Chip
Materials Emitted Color Resin Color
AlGaInP Brilliant Red Water Clear
Absolute Maximum Ratings (Ta=25
℃
℃℃
℃)
Parameter Symbol Rating Unit
Reverse Voltage V
R
5 V
Forward Current I
F
25 mA
Peak Forward Current
(Duty 1/10 @1KHz) I
FP
60 mA
Power Dissipation Pd
60 mW
Operating Temperature T
opr
-40 ~ +85
℃
Storage Temperature Tstg -40 ~ +90
℃
Electrostatic Discharge
ESD
HBM
2000 V
Soldering Temperature T
sol
Reflow Soldering : 260
℃
for 10 sec.
Hand Soldering : 350
℃
for 3 sec.
Electro
-Optical Characteristics (Ta=25℃
℃℃
℃)
Parameter Symbol Min. Typ. Max. Unit Condition
Luminous Intensity Iv 72 ----- 180 mcd I
F
=20mA
Viewing Angle 2θ
1/2
----- 130 ----- deg I
F
=20mA
Peak Wavelength
λ
p ----- 632 ----- nm I
F
=20mA
Dominant Wavelength
λ
d 617.5 ----- 633.5 nm I
F
=20mA
Spectrum Radiation Bandwidth
△λ
----- 20 ----- nm I
F
=20mA
Forward Voltage V
F
1.75 ----- 2.35 V I
F
=20mA
Reverse Current I
R
----- ----- 10 µA V
R
=5V
Note:
1. Tolerance of Luminous Intensity: ±11%
2. Tolerance of Dominant Wavelength: ±1nm
3.Tolerance of Forward Voltage ±0.1V
DATASHEET
SMD REFLECTOR
17-215/R6C-AQ1R2B/3T
3
Copyright © 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0008824 Rev.3
www.everlight.com
Bin Range of Luminous Intensity
Bin Code Min. Max. Unit Condition
Q1 72 90
mcd I
F
=20mA
Q2 90 112
R1 112 140
R2 140 180
Note:
Tolerance of Luminous Intensity: ±11%
Bin Range of Dominant Wavelength
Group Bin Min. Max. Unit Condition
A
E4 617.5 621.5
nm I
F
=20mA
E5 621.5 625.5
E6 625.5 629.5
E7 629.5 633.5
Notes:
Tolerance of Dominant Wavelength: ±1nm
Bin Range Of Forward Voltage
Group Bin Min. Max. Unit Condition
B
0 1.75 1.95
V
I
F
=20mA
1 1.95 2.15
2 2.15 2.35
Note:
Tolerance of Forward Voltage
±
0.1V
DATASHEET
SMD REFLECTOR
17-215/R6C-AQ1R2B/3T
4
Copyright © 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0008824 Rev.3
www.everlight.com
Typical Electro
-
Optical Characteristics Curves
DATASHEET
SMD REFLECTOR
17-215/R6C-AQ1R2B/3T
5
Copyright © 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0008824 Rev.3
www.everlight.com
Package Dimension
Note: Tolerances unless mentioned ±0.1mm. Unit = mm
DATASHEET
SMD REFLECTOR
17-215/R6C-AQ1R2B/3T
6
Copyright © 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0008824 Rev.3
www.everlight.com
Moisture Resistant Packing
Materials
Label Explanation
‧
CPN: Customer’s Product Number
‧
P/N: Product Number
‧
QTY: Packing Quantity
‧
CAT: Luminous Intensity Rank
‧
HUE: Chromaticity Coordinates & Dom. Wavelength
Rank
‧
REF: Forward Voltage Rank
‧
LOT No: Lot Number
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
DATASHEET
SMD REFLECTOR
17-215/R6C-AQ1R2B/3T
7
Copyright © 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0008824 Rev.3
www.everlight.com
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Label Desiccant Label
Aluminum moisture-proof bag
DATASHEET
SMD REFLECTOR
17-215/R6C-AQ1R2B/3T
8
Copyright © 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0008824 Rev.3
www.everlight.com
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
Pre-heating
150~200°C
60~120sec.
3°C/sec.Max.
Above 217°C
60~150sec.
260°C Max.
10sec. Max.
6°C/sec.Max.
Above255°C
30sec.Max.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board
DATASHEET
SMD REFLECTOR
17-215/R6C-AQ1R2B/3T
9
Copyright © 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0008824 Rev.3
www.everlight.com
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once
in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each
terminal. Be careful because the damage of the product is often started at the time of the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the
characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com
DATASHEET
SMD REFLECTOR
17-215/R6C-AQ1R2B/3T
10
Copyright © 2010, Everlight All Rights Reserved. Release Date : May.21 .2013. Issue No: DSE-0008824 Rev.3
www.everlight.com
Application Restrictions
High reliability applications such as military/aerospace, automotive safety/security systems,
and medical equipment may require different product. If you have any concerns, please contact
Everlight before using this product in your application. This specification guarantees the quality
and performance of the product as an individual component. Do not use this product beyond the
specification described in this document.
