TLP3502 TOSHIBA Photocoupler GaAs Ired & Photo-Triac TLP3502 Trica Driver Programmable Controllers AC-Output Module Solid State Relay Unit in mm The TOSHIBA TLP3502 consists of a photo-triac optically coupled to a gallium arsenide infrared emitting diode in a 8 lead plastic DIP package. * Peak off-state voltage: 400V(min.) * Trigger LED current: 10mA(max.) * On-state current: 0.5Arms(max.) * Isolation voltage: 2500Vrms(min.) * UL recognized: UL1577, file no. E67349 * Trigger LED Current TOSHIBA 11-10C3 Weight: 0.52 g Classification* Trigger LED Current (mA) VT=6V, Ta=25C Min. Max. Marking Of Classification Pin Configurations(top view) (IFT5) 5.0 T5 (IFT7) 7.0 T5,T7 Standard 10 T5,T7, blank 8 *Ex. (IFT5); TLP3502(IFT5) (Note ) Application type name for certification test, please use standard product type name, i.e. TLP3502(IFT5): TLP3502 2 6 3 5 2 : ANODE 3 : CATHODE 5 : TRIAC GATE 6 : TRIAC T1 8 : TRIAC T2 1 2002-09-25 TLP3502 Maximum Ratings (Ta = 25C) Characteristic Symbol Rating Unit IF 50 mA IF/C -0.7 mA/C Peak forward current (100s pulse, 100pps) IFP 1 A Reverse voltage VR 5 V Junction temperature Tj 125 C VDRM 400 V Forward current LED Forward current derating (Ta 53C) Off-state output terminal voltage Detector On-state RMS Current Ta=40C 0.5 IT(RMS) Ta=60C A 0.35 IT/C -7.2 mA/C ISP 2 A ITSM 5 A Tj 110 C Storage temperature range Tstg -40~125 C Operating temperature range Topr -20~80 C Lead soldering temperature (10s) Tsol 260 C BVS 2500 Vrms On-state current derating(Ta 40C) Peak current from snubber circuit(100s pulse, 120pps) Peak nonrepetitive surge current(50Hz,peak) Junction temperature Isolation voltage (AC, 1min., R.H. 60%) (Note) (Note) Device considered a two terminal: LED side pins shorted together and detector side pins shorted together. Recommended Operating Conditions Characteristic Symbol Min. Typ. Max. Unit Supply voltage VAC 120 Vac Forward current IF 15 20 25 mA Peak current from snubber circuit ISP 1 A Operating temperature Topr -25 85 C 2 2002-09-25 TLP3502 Individual Electrical Characteristics (Ta = 25C) Detector LED Characteristic Symbol Test Condition Min. Typ. Max. Unit Forward voltage VF IF=10mA 1.0 1.15 1.3 V Reverse current IR VR=5 V 10 A Capacitance CT V=0, f=1MHz 30 pF Peak off-state current IDRM VDRM=400V,Ta=110C 100 A Peak on-state voltage VTM ITM=0.75A 3.0 V 25 mA 200 500 V/s 5 V/s Min. Typ. Max. Unit Holding current IH Critical rate of rise of off-state voltage dv/dt Critical rate of rise of commutating voltage dv/dt(c) Vin=120Vrms (fig.1) Vin=120Vrms, IT=0.5Arms (fig. 1) Coupled Electrical Characteristics (Ta = 25C) Characteristics Symbol Test Condition Trigger LED current IFT VT=6V 10 mA Capacitance (input to output) CS VS=0, f=1MHz 1.5 pF Isolation resistance RS VS=500V 5x1010 1014 2500 AC, 1 second, in oil 5000 DC, 1 minute, in oil 5000 AC, 1 minute Isolation voltage BVS Vrms Vdc Fig. 1: dv/dt test circuit Rin VCC 120 5V,VCC 2 8 0V Vin 3 6 5 dv/dt(c) RL 3 dv/dt 2002-09-25 TLP3502 IF - Ta IT(RMS) - Ta (mA) 1.0 80 On-state current IT(RMS) Allowable forward current IF (mA) 100 60 40 20 0 -20 0 40 20 60 80 100 0.8 0.6 0.4 0.2 0 -20 120 0 20 Ambient temperature Ta (C) 100 120 Ta = 25C 50 Ta = 25C (mA) 30 1000 500 Forward current IF Allowable pulse forward current IFP (mA) 80 IF - VF 100 Pulse width100s 3000 60 Ambient temperature Ta (C) IFP - DR 5000 40 300 100 50 30 10 5 3 1 0.5 0.3 10 3 10 -3 3 10 -2 3 10 -1 3 10 0 0.1 0.6 Duty cycle ratio DR 0.8 1.0 1.2 Forward voltage VF/Ta - IF 1.4 VF 1.6 1.8 2.6 3.0 (V) IFP - VFP 1000 (mA) IFP -2.4 -2.0 Pulse forward current Forward voltage temperature coefficient VF/Ta (mV/C) -2.8 -1.6 -1.2 -0.8 -0.4 0.1 0.3 0.5 1 3 Forward current 5 IF 10 30 500 300 100 50 30 10 Pulse width10s 5 repetitive frequency 3 = 100Hz Ta = 25C 50 0 0.6 (mA) 1.0 1.4 1.8 2.2 Pulse forward voltage VFP (V) 4 2002-09-25 TLP3502 Normalized IFT - Ta Normalized IH - Ta 3 VT = 3V 2 2 1.2 1 1.2 1 Holding current IH (arbitrary unit) Trigger LED current (arbitrary unit) IFT 3 0.5 0.3 0.1 -40 -20 0 20 40 60 80 0.5 0.3 0.1 -40 100 -20 Ambient temperature Ta (C) 60 80 100 80 100 Normalized VDRM - Ta VDRM = Rated 2 101 100 0 40 1.4 Off-state output terminal voltage VDRM (arbitrary unit) Peak off-state current IDRM (arbitrary unit) 10 20 Ambient temperature Ta (C) Normalized IDRM - Ta 103 0 20 40 60 80 1.2 1.0 0.8 0.6 0.4 0.2 -40 100 -20 0 20 40 60 Ambient temperature Ta (C) Ambient temperature Ta (C) Normalized LED Current - LED current Pulse Width 10 Normalized LED current IF/IFT 5 3 2 1.6 1.2 1 0.5 0.3 10 30 50 100 LED current pulse width 300 PW 500 1000 (s) 5 2002-09-25 TLP3502 RESTRICTIONS ON PRODUCT USE 000707EBC * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. * * * The products described in this document are subject to the foreign exchange and foreign trade laws. The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. The information contained herein is subject to change without notice. 6 2002-09-25