VMPS-45-3.3 - V-Infinity



•

VMPS-45-3.3 Open Frame Power Supply

V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258

DC output voltage 3.3V

Output V. tolerance ±3%

Output rated current 8A

Output min. range 0A

Output max. range 10.7A

Ripple & noise 80m

Line regulation ±1%

Load regulation ±3%

Rated output power 26.4W

Rated output power 35W with 18CFM min. forced air convection

Efficiency 65%

DC voltage adj. ±10%

Input voltage range 90~264VAC 47~4403Hz; 120-370VDC

AC current 1.2A/115V 0.7A/230V

Inrush current cold start 20A/115V 40A/230V

Leakage current <0.3mA/264VAC

Overload protection 36~55W output power

type: Hiccup mode, recovers automatically after fault condition is removed

Over voltage protection 115%~135%

Temperature coefficient ±0.04% / °C (0~50°C)

Set up, rise, hold up time 800ms, 30ms, 20ms/230VAC 1.2s, 30ms, 12ms /115VAC

Vibration 10~500Hz, 2G 10min./1 cycle (1 hour each axes)

Withstand voltage I/P-O/P: 4KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC, for 1 min.

Isolation resistance I/P-O/P, I/P-FG, O/P-FG: 500VDC / 100M Ohms min.

Working temp., humidity -10°C~+60% (refer to output derating curve), 20%-90% RH

Storage temp., humidity -20°C~+85°C, 10%-95% RH

Dimensions 5x3x1.10 inches PCB only (127x76.2x28 mm)

Weight 0.40 lbs (.18 Kgs)

Safety standards UL2601-1, EN60601-1 approved

EMC standards CISPR11 (EN55011), EN61000-4,2,3,4,5,6,8,11, IEC61000-3-2,3

EN60601-1-2, verification

Notes: 1. All parameters are specified at 230VAC input, rated load, 25°C 70% RH ambient

2. Tolerance includes set up tolerance, line regulation, load regulation

3. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor

4. Line regulation is measured from low line to high line at rated load

5. Mounting holes M1 and M2 should be grounded for EMI purposes

V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise

customers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for

customer’s applications using V-Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s

published specifications. Nothing will be covered outside of standard product warranty.

Features

·Universal AC input / Full range

·Low leakage current 0.3mA

·Protections:Short circuit/Over load/Over voltage

·Cooling by free air convection

·100% full load burn-in test

·Fixed switching frequency at 45KHz

·3 years warranty