Electrical Characteristics (TA = 25 OC unless otherwise noted )
Symbol Parameter Conditions Min Typ Max Units
OFF CHARACTERISTICS
BVDSS Drain-Source Breakdown Voltage VGS = 0 V, ID = 250 µA 60 V
∆BVDSS/∆TJBreakdown Voltage Temp. Coefficient ID = 250 µA, Referenced to 25 o C63 mV/o C
IDSS Zero Gate Voltage Drain Current VDS = 48 V, VGS = 0 V 10 µA
TJ =125°C 100 µA
IGSSF Gate - Body Leakage, Forward VGS = 20 V, VDS = 0 V 100 nA
IGSSR Gate - Body Leakage, Reverse VGS = -20 V, VDS = 0 V -100 nA
ON CHARACTERISTICS (Note 2)
VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250 µA 2 3 4 V
TJ =125°C 1.5 2.4 3
RDS(ON) Static Drain-Source On-Resistance VGS = 10 V, ID = 4 A0.084 0.1 Ω
TJ =125°C 0.14 0.18
ID(ON) On-State Drain Current VGS = 10 V, VDS = 10 V 15 A
gFS Forward Transconductance VDS = 15 V, ID = 4 A 6S
DYNAMIC CHARACTERISTICS
Ciss Input Capacitance VDS = 30 V, VGS = 0 V,
f = 1.0 MHz 250 pF
Coss Output Capacitance 100 pF
Crss Reverse Transfer Capacitance 30 pF
SWITCHING CHARACTERISTICS (Note 2)
tD(on)Turn - On Delay Time VDD = 25 V, ID = 1.2 A,
VGS = 10 V, RGEN = 50 Ω10 25 ns
trTurn - On Rise Time 18 50 ns
tD(off) Turn - Off Delay Time 37 65 ns
tfTurn - Off Fall Time 30 60 ns
QgTotal Gate Charge VDS = 40 V, ID = 4 A,
VGS = 10 V 9 15 nC
Qgs Gate-Source Charge 2.3 nC
Qgd Gate-Drain Charge 2.6 nC
DRAIN-SOURCE DIODE CHARACTERISTICS AND MAXIMUM RATINGS
ISMaximum Continuous Drain-Source Diode Forward Current 2.5 A
VSD Drain-Source Diode Forward Voltage VGS = 0 V, IS = 2.5 A (Note 2)0.85 1.2 V
Notes:
1. RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. RθJC is
guaranteed by design while RθCA is determined by the user's board design.
Typical RθJA using the board layouts shown below on FR-4 PCB in a still air environment:
Scale 1 : 1 on letter size paper
2. Pulse Test: Pulse Width < 300µs, Duty Cycle < 2.0%
NDT3055 Rev.B
a. 42oC/W when mounted on a 1 in2 pad of
2oz Cu. b. 95oC/W when mounted on a 0.066 in2
pad of 2oz Cu. c. 110oC/W when mounted on a 0.00123
in2 pad of 2oz Cu.