VS-8TQ080S-M3, VS-8TQ100S-M3 www.vishay.com Vishay Semiconductors High Performance Schottky Rectifier, 8 A FEATURES Base cathode 2 * * * * 175 C TJ operation Low forward voltage drop High frequency operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance * Guard ring for enhanced ruggedness and long term reliability * Meets MSL level 1, per J-STD-020, LF maximum peak of 245 C 2 1 3 Anode 1 3 N/C D2PAK (TO-263AB) PRIMARY CHARACTERISTICS * Designed and qualified according to JEDEC(R)-JESD 47 IF(AV) 8A VR 80 V, 100 V VF at IF 0.58 V * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 IRM 7 mA at 125 C TJ max. 175 C EAS 7.5 mJ Package D2PAK (TO-263AB) Circuit configuration Single DESCRIPTION The VS-8TQ... Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS IF(AV) Rectangular waveform VRRM Range IFSM tp = 5 s sine VF 8 Apk, TJ = 125 C TJ Range VALUES UNITS 8 A 80/100 V 850 A 0.58 V -55 to +175 C VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VR Maximum working peak reverse voltage VRWM VS-8TQ080S-M3 VS-8TQ100S-M3 UNITS 80 100 V ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Maximum average forward current See fig. 5 IF(AV) Maximum peak one cycle non-repetitive surge current See fig. 7 IFSM Non-repetitive avalanche energy Repetitive avalanche current TEST CONDITIONS 50 % duty cycle at TC = 157 C, rectangular waveform 5 s sine or 3 s rect. pulse 10 ms sine or 6 ms rect. pulse Following any rated load condition and with rated VRRM applied VALUES UNITS 8 A 850 230 A EAS TJ = 25 C, IAS = 0.50 A, L = 60 mH 7.50 mJ IAR Current decaying linearly to zero in 1 s Frequency limited by TJ maximum VA = 1.5 x VR typical 0.50 A Revision: 02-Nov-17 Document Number: 94946 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-8TQ080S-M3, VS-8TQ100S-M3 www.vishay.com Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 8A Maximum forward voltage drop VFM (1) See fig. 1 8A IRM (1) 0.88 0.69 0.55 VR = Rated VR TJ = 125 C Maximum junction capacitance CT VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 C LS Measured lead to lead 5 mm from package body dV/dt mA 7 Typical series inductance Maximum voltage rate of change V 0.58 TJ = 125 C TJ = 25 C UNITS 0.72 TJ = 25 C 16 A 16 A Maximum reverse leakage current See fig. 2 VALUES Rated VR 500 pF 8 nH 10 000 V/s VALUES UNITS -55 to +175 C Note (1) Pulse width < 300 s, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TEST CONDITIONS TJ, TStg Maximum thermal resistance, junction to case RthJC DC operation See fig. 4 Typical thermal resistance, case to heatsink RthCS Mounting surface, smooth, and greased 2.0 C/W 0.50 2 g 0.07 oz. minimum 6 (5) maximum 12 (10) kgf * cm (lbf * in) Approximate weight Mounting torque 8TQ080S Case style D2PAK (TO-263AB) Marking device 8TQ100S 100 1000 100 TJ = 175 C TJ = 125 C TJ = 25 C 10 1 0.1 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) TJ = 175 C 10 TJ = 150 C 1 TJ = 125 C 0.1 TJ = 100 C TJ = 75 C 0.01 TJ = 50 C 0.001 TJ = 25 C 0.0001 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 0 20 40 60 80 100 VFM - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage Revision: 02-Nov-17 Document Number: 94946 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-8TQ080S-M3, VS-8TQ100S-M3 www.vishay.com Vishay Semiconductors CT - Junction Capacitance (pF) 1000 TJ = 25 C 100 0 10 20 30 40 50 60 70 80 90 100 110 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Single pulse (thermal resistance) 0.1 0.0001 0.001 0.01 0.1 1 t1 - Rectangular Pulse Duration (s) 180 7 175 6 170 Average Power Loss (W) Allowable Case Temperature (C) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics DC 165 160 Square wave (D = 0.50) 80 % rated VR applied 155 150 145 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 5 RMS limit 4 3 DC 2 1 See note (1) 0 140 0 2 4 6 8 10 12 0 2 4 6 8 10 12 IF(AV) - Average Forward Current (A) IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics Revision: 02-Nov-17 Document Number: 94946 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-8TQ080S-M3, VS-8TQ100S-M3 www.vishay.com IFSM - Non-Repetitive Surge Current (A) Vishay Semiconductors 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (s) Fig. 7 - Maximum Non-Repetitive Surge Current L High-speed switch IRFP460 D.U.T. Freewheel diode Rg = 25 Current monitor + Vd = 25 V 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR ORDERING INFORMATION TABLE Device code VS- 8 T Q 100 S 1 2 3 4 5 6 1 - Vishay Semiconductors product 2 - Current rating (8 A) 3 - Circuit configuration: T = TO-220 4 - Schottky "Q" series 5 - Voltage ratings 6 - S = D2PAK (TO-263AB) 7 - TRL -M3 7 8 080 = 80 V 100 = 100 V None = tube TRL = tape and reel (left oriented) TRR = tape and reel (right oriented) 8 - -M3 = halogen-free, RoHS-compliant, and termination lead (Pb)-free Revision: 02-Nov-17 Document Number: 94946 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-8TQ080S-M3, VS-8TQ100S-M3 www.vishay.com Vishay Semiconductors ORDERING INFORMATION PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION VS-8TQ080S-M3 50 1000 Antistatic plastic tubes VS-8TQ080STRR-M3 800 800 13" diameter reel VS-8TQ080STRL-M3 800 800 13" diameter reel VS-8TQ100S-M3 50 1000 Antistatic plastic tubes VS-8TQ100STRR-M3 800 800 13" diameter reel VS-8TQ100STRL-M3 800 800 13" diameter reel LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?96164 Part marking information www.vishay.com/doc?95444 Packaging information www.vishay.com/doc?96424 SPICE model www.vishay.com/doc?96227 Revision: 02-Nov-17 Document Number: 94946 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors D2PAK DIMENSIONS in millimeters and inches Conforms to JEDEC(R) outline D2 PAK (SMD-220) (2)(3) E B Pad layout A A (E) c2 11.00 MIN. (0.43) A (3) L1 4 9.65 MIN. (0.38) (D1) (3) Detail A D H 1 2 17.90 (0.70) 15.00 (0.625) (2) 3 3.81 MIN. (0.15) L2 B B 2.32 MIN. (0.08) A 2 x b2 c 2.64 (0.103) 2.41 (0.096) (3) E1 C View A - A 2xb 0.004 M B 0.010 M A M B Plating Base Metal (4) b1, b3 H 2x e Gauge plane c1 (4) (c) B 0 to 8 Seating plane L3 Lead tip A1 L (b, b2) L4 Section B - B and C - C Scale: None Detail "A" Rotated 90 CW Scale: 8:1 SYMBOL MILLIMETERS MIN. MAX. INCHES MIN. MAX. NOTES SYMBOL MILLIMETERS MIN. MAX. INCHES MIN. MAX. NOTES A 4.06 4.83 0.160 0.190 D1 6.86 8.00 0.270 0.315 3 A1 0.00 0.254 0.000 0.010 E 9.65 10.67 0.380 0.420 2, 3 E1 7.90 8.80 0.311 0.346 3 b 0.51 0.99 0.020 0.039 b1 0.51 0.89 0.020 0.035 b2 1.14 1.78 0.045 0.070 b3 1.14 1.73 0.045 0.068 c 0.38 0.74 0.015 0.029 c1 0.38 0.58 0.015 0.023 c2 1.14 1.65 0.045 0.065 D 8.51 9.65 0.335 0.380 4 e 2.54 BSC 0.100 BSC H 14.61 15.88 0.575 0.625 4 L 1.78 2.79 0.070 0.110 L1 - 1.65 - 0.066 4 L2 1.27 1.78 0.050 0.070 2 L4 L3 0.25 BSC 4.78 5.28 3 0.010 BSC 0.188 0.208 Notes (1) Dimensioning and tolerancing per ASME Y14.5 M-1994 (2) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outmost extremes of the plastic body (3) Thermal pad contour optional within dimension E, L1, D1 and E1 (4) Dimension b1 and c1 apply to base metal only (5) Datum A and B to be determined at datum plane H (6) Controlling dimension: inch (7) Outline conforms to JEDEC(R) outline TO-263AB Revision: 08-Jul-15 Document Number: 95046 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000