D-Sub DIN 41 652 * CECC 75 301-802 * IEC 60 807 Number of contacts Mounting height Sta nda rd V ers ion s 9--37 50 D-Sub - S Turned solder pins, angled with/without snap-in-clips and grounding board locks Identification Performance levels Explanations see page 02.02 Other performance levels on request No. of contacts Part No. Performance level Performance level 3 2 Male connector metal shell with dimples With snap-in clips and grounding board locks 2.84 mm pitch 9 15 25 37 50 09 66 163 781 09 66 263 781 09 66 363 781 09 66 463 781 09 66 563 781 2.84 mm pitch . . . . . 2.54 mm pitch available on request 9 15 25 37 50 09 66 162 781 09 66 262 781 09 66 362 781 09 66 462 781 09 66 562 781 9 15 25 37 50 09 66 123 780 09 66 223 780 09 66 323 780 09 66 423 780 09 66 523 780 . . . . . 02 . 12 Please insert digit for flange thread or fitted female screw locks M3 1 4-40 UNC 2 fitted screw locks 4-40 UNC 3 9 15 25 37 50 09 66 122 780 09 66 222 780 09 66 322 780 09 66 422 780 09 66 522 780 09 66 162 681 09 66 262 681 09 66 362 681 09 66 462 681 09 66 562 681 . . . . . 2.84 mm pitch . . . . . 2.54 mm pitch available on request . . . . . 2.54 mm pitch 2.84 mm pitch Without snap-in clips and grounding board locks 09 66 163 681 09 66 263 681 09 66 363 681 09 66 463 681 09 66 563 681 09 66 123 680 09 66 223 680 09 66 323 680 09 66 423 680 09 66 523 680 . . . . . 2.54 mm pitch . . . . . 09 66 122 680 09 66 222 680 09 66 322 680 09 66 422 680 09 66 522 680 . . . . . D-Sub DIN 41 652 * CECC 75 301-802 * IEC 60 807 Number of contacts Mounting height Sta nda rd V ers ion s 9--37 50 Identification Drawing Male connector With snap-in clips and grounding board locks Dimensions in mm 9-37 D-Sub - S Turned solder pins, angled with/without snap-in-clips and grounding board locks 50 Mating face acc. to: DIN 41 652 * CECC 75 301-802 * IEC 60 807 No. 1 contact Grounding pins 0.2 x 0.6 fitted screw locks 4 - 40 UNC Dimples Without snap-in clips and grounding board locks 9-37 50 Mating face acc. to: DIN 41 652 * CECC 75 301-802 * IEC 60 807 No. 1 contact X M 3 or 4 - 40 UNC Dimples Board drillings 9-37 a 50 b0.1 c f 9 30.90 25.00 12.90 2.74 15 39.20 33.30 12.90 2.74 25 53.10 47.00 12.90 2.76 37 69.40 63.50 12.90 2.76 50 67.00 61.10 15.70 2.76 02 . 13 Mating conditions see page 02.02 Mounting details see page 02.24