Approx. 400mW
Features
110 77.0 11.0
HONGFA RELAY
Coil power
25200 x (1 15%)
VDE
Shock resistance *
Dielectric
strength
Plastic sealed,
Flux proofed
ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 2018 Rev. 1.00
190
16A 250VAC at 85°C
Incandescent lamp 3000W 230VAC
TV-8 120VAC
Incandescent lamp 1200W 120VAC at 50°C
Incandescent lamp 1200W 277VAC at 50°C
Standard ballast 2.2A 277VAC at 50°C
Electronic ballast 16A 277/120VAC 85°C
Electronic ballast 12A 277/120VAC 85°C
Electronic ballast 8A 277/347VAC 85°C
Electronic ballast 15A 120VAC 85°C3)
Electronic ballast 8A 277/347VAC 85°C3)
File No.:116934
File No.:CQC17002168381
File No.:E134517
UL/CUL
HF115F-S
1A
100m max.(at 1A 6VDC)
W+AgSnO2
Resistive:16A 250VAC
Contact arrangement
Contact resistance
Contact material
5000VAC 1min
1250VAC 1min
10kV (1.2 / 50µs)
10ms max.
5ms max.
55K max.
98m/s2
980m/s2
10Hz to 150Hz 10g
5% to 85% RH
-40 to 85
PCB
Approx. 13.5g
MINIATURE HIGH POWER RELAY
CONTACT DATA
CHARACTERISTICS
COIL
Nominal
Voltage
VDC
Coil
Resistance
Pick-up
Voltage
VDC
max.
Drop-out
Voltage
VDC
min.
COIL DATA
5
6
12
24
48
60
3.50
4.20
8.40
16.8
33.6
42.0
0.5
0.6
1.2
2.4
4.8
6.0
SAFETY APPROVAL RATINGS
Insulation resistance
Between coil & contacts
Between open contacts
Surge voltage (between coil & contacts)
Operate time (at nomi. volt.)
Release time (at nomi. volt.)
Temperature rise (at nomi. volt.)
Functional
Destructive
62 x (1 10%)
90 x (1 10%)
360 x (1 10%)
1440 x (1 10%)
5760 x (1 15%)
7500 x (1 15%)
96.30 0.9 202 x (1 10%)
18 12.6 1.8 810 x (1 10%)
7.5
9.0
18
36
72
90
165
13.5
27
Max.
Voltage
VDC
● Special contact struction
● Incandescent lamp load: 3000W 230VAC
● 5kV dielectric strength (between coil and contacts)
● Creepage distance: 11mm
● Low height: 15.7 mm
● Meeting reinforce insulation
● Product in accordance to IEC 60335-1 available
● Plastic sealed and flux proofed types available
● UL insulation system：Class F available
● Environmental friendly product (RoHS compliant)
● Outline Dimensions: 29.0mm x 12.7mm x 15.7mm
1000M (at 500VDC)
Construction
at 23
2) Maximum voltage refers to the maximum voltage which relay
coil could endure in a short period of time.
Contact rating
Notes:1) This contact resistance value is tested under the norminal
voltage.
2) * Index is not that of relay length direction.
3) The data shown above are initial values.
4) UL insulation system: Class F, Class B.
V
DE
Notes:1) The data shown above are initial values.
Notes:1) The data shown above are initial values.
Vibration resistance *
Humidity
Ambient temperature
Termination
Unit weight
Electrical endurance
Notes: 1) All values unspecified are at room temperature.
2) Only typical loads are listed above. Other load specifications
can be available upon request.
3) Zero crossing control cooperative.
1.2 x 104OPS (3000W 230VAC,
Incand escentlamp load, Room temp.,
1s on 11s off)
Incandescent Lamp: 3000W 230VAC
Inrush current: 165A / 20ms
LED(Electronic ballast): 492A/1.5ms
Max. switching power
Mechanical endurance
Max. switching voltage
Max. switching current 440VAC
16A
4000VA
5 x 106OPS
3) For products with rated voltage ≥ 48V, measures should be
taken to prevent coil overvoltage in order to protect coil in test
and application (eg. Connect diodes in parallel).
3)
3)
2)
3)
16A 250VAC at 85°C
1)
1) 1)
191
(Bottom view)
Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm
and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm.
2) The tolerance without indicating for PCB layout is always ±0.1mm.
3) The width of the gridding is 2.52mm.
1) 2)
(Bottom view)
Disclaimer
The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice.
We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to
choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the
user’s responsibility to determine which product should be used only.
© Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved.
Coil voltage 5, 6, 9, 12, 18, 24, 48, 60, 110VDC
HF115F-S / 12 S F-H
Insulation Standard F: Class F Nil: Class B
ORDERING INFORMATION
Type
Construction S: Plastic sealed Nil: Flux proofed
Contact arrangement H: 1 Form A
OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT
Outline Dimensions
Wiring DiagramPCB Layout
(XXX)
Unit: mm
6- 1.3 20.16
2.6 5.04
7.56
Notes: 1) We recommend flux proofed types for a clean environment (free from contaminations like H2S, SO2, NO2, dust, etc.).
We suggest to choose plastic sealed types and validate it in real application for an unclean environment (with contaminations like H2S,
SO2, NO2, dust, etc.).
Special code3) XXX: Customer special requirement Nil: Standard
3) The customer special requirement express as special code after evaluating by Hongfa. e.g.(335) stands for product in accordance to
IEC 60335-1 (GWT).
12.7 0.3
4-0.5x0.8
0.5x0.5
2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays
on PCB.
