1578246 - Metrobility Optical Systems

•Copper and fiber connectivity

•10Mbps and 100Mbps

•Full complement of LEDs

•MT-RJ, VF-45, SC and ST fiber

connections

•RJ-45 and BNC copper connections

Lancast transceivers from Metrobility Optical

Systems provide high-performance connections

between bridges, routers, servers, workstations

and other peripherals in 10Mbps or 100Mbps

networks. The compact units attach in the

narrowest of spaces without interfering with

other interfaces. A full complement of LEDs

provide indication of normal operation and

network diagnostics. These standards-based

transceivers are compatible with Ethernet and

Fast Ethernet devices from other network tech-

nology providers, ensuring high throughput

performance in multi-vendor environments.

Lancast 4320 10Mbps Transceiver

The Lancast 4320 series transceivers for

10Mbps LANs connect Ethernet peripherals to

10BASE-T, 10BASE-FL or 10BASE-2 networks.

The convenient location of the connectors,

plus their extremely small size and locking-post

design, allow for installation in limited space.

In addition to a 15-pin DB-type connector and

a full complement of LEDs, each transceiver

also incorporates a simple, user-selectable DIP

switch for Signal Quality Error (SQE), thus

allowing fast, easy setup in a variety of network

configurations.

Lancast 6221/6224 100Mbps Transceiver

The Lancast 6221 and 6224 transceivers

provide 100Mbps connectivity for desktop PCs

and servers as well as bridges, switches and

routers. A four-position DIP switch provides

convenient user-selectable control of configura-

tion and interoperability by the network integra-

tor. The 6224 transceiver for 10/100BASE-TX

supports user-enabled auto-negotiation for half-

duplex or full-duplex operation and for 10 or

100Mbps data rates. The 6221 transceiver

for 100BASE-FX utilizes full-duplex technology

in 100Mbps LANs, and supports links up to

2km over multimode and up to 15km over

singlemode fiber optic cable. Transceivers with

MT-RJ or VF-45 connectors are also available

for versatile network connnections.

The Metrobility Difference

10Mbps connectors options for

RJ-45, BNC, ST and SMA

Reverse polarity detection and

automatic correction

Supports long distance data

transmission over singlemode and

multimode ber optics

Switch-selectable SQE

AUI or MII interface on each

transceiver

Full complement of diagnostic

LEDs

Product Highlights

100Mbps with ber connector

option for ST, SC, MT-RJ and

VF-45

Full-duplex mode for operation

between switches, routers and

servers

Physical-layer signaling schemes

support 100Mbps data rates over a

range of cabling types

Unique slim neck design eliminates

the need for additional interface

cabling

Industry-standard 40-pin MII

interface

Flexible 10Mbps and 100Mbps Connectivity Solutions

Simply Brilliant Optical Etherne

Transceivers

Lancast®

Metrobility Optical Systems is

an innovative next generation

optical networking company

whose focus is on delivering

optical access platforms and

to harness the power of

Ethernet and fiber optics to

deliver superior network edge

access and connectivity

solutions.

The information in this publication is accurate

as of its publication date; such information is sub-

ject to change without notice. Metrobility Optical

Systems is not responsible for any inadvertent

errors. Lancast is a registered trademark, and

AutoTwister, MicroChassis, “redundant twister,”

“twister,” WebBeacon and NetBeacon are trade-

marks of Metrobility Optical Systems. All other

trademarks are the property of their respective

owners.

Printed in U.S.A. Revised 11/01

D200-10

Metrobility Optical Systems, Inc.

25 Manchester Street

Merrimack, NH USA 03054

phone 1.603.880.1833

fax 1.603.594.2887

www.metrobility.com

Environmental

Operating Temperature 0°C - 50°C

Operating Humidity 5% - 90% (non-condensing)

Storage Temperature -20°C - 70°C

Regulatory

Compliance IEEE 802.3 / IEEE 802.3u

Safety and EMC FCC, UL, CE, C-UL

Specifications

Supported

Speed Max. Power Segment

Model# (Mbps) Requirements Connectors LEDs DIP Switches Length

4320-12 10 120mA @ 12VDC AUI, RJ-45 PWR, LINK, TX, SQE 100m

RX,COL, POL, JAB

4321-12 10 120mA @ 12VDC AUI, BNC PWR, TX, SQE 185m

with T connector RX, COL, JAB

4322-11 10 210mA @ 12VDC AUI, multimode ST PWR, LINK, TX, ----- 2km

RX, COL

4322-21 10 210mA @ 12VDC AUI, multimode SMA PWR, LINK, TX, ----- 2km

RX, COL

4322-31 10 230mA @ 12VDC AUI, singlemode ST PWR, LINK, TX, ----- 8km

RX, COL

6221-01 100 336mA max @ 5.0VDC MII, multimode SC PWR, LINK, TX, half duplex 2km

RX, COL full duplex

PHY

6221-02 100 336mA max @ 5.0VDC MII, multimode ST PWR, LINK, TX, half duplex 2km

RX, COL full duplex

PHY

6221-03 100 336mA max @ 5.0VDC MII, singlemode SC PWR, LINK, TX, half duplex 15km

RX, COL full duplex

PHY

6221-04 100 336mA max @ 5.0VDC MII, multimode VF-45 PWR, LINK, TX, half duplex 2km

RX, COL full duplex

PHY

6221-06 100 336mA max @ 5.0VDC MII, multimode MT-RJ PWR, LINK, TX, half duplex 2km

RX, COL full duplex

PHY

6221-07 100 336mA max @ 5.0VDC MII, singlemode MT-RJ PWR, LINK, TX, half duplex 15km

RX, COL full duplex

PHY

6224 10/100 336mA max @ 5.0VDC MII, RJ-45 PWR, LINK, TX, half duplex 100m

RX, COL full duplex

10/100Mbps

PHY

Dimensions

4320-12 2.37” L x 1.75” W x .88” H

4321-12 2.37” L x 1.75” W x .88” H

4322-xx 2.00” L x 1.50” W x .75” H

62xx 3.75” L x 1.86” W x .86” H

Metrobility Optical Systems,Inc.

ISO 9001

A6285