www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.026/02/13
Surface Mount
Switching Diode
Features:
• For High-Speed Switching Application
• Connected In Series
Applications:
High speed switching application
Max. Rating @ Ta = 25°C unless otherwise specied
Parameter Symbol Limits Unit
Non-Repetitive peak reverse voltage Vrm 100 V
DC reverse voltage Vr100 V
Forward current If200 mA
Forward surge current @t = 1μs Ifs 4.5 A
Power dissipation Pd330 mW
Operating junction temperature range Tj150 °C
Operating and storage temperature range Tstg -65 to +150 °C
Electrical Characteristics @ Ta = 25°C unless otherwise specied
Parameter Symbol Conditions Min. Max. Unit
Reverse breakdown voltage Vr(br)Ir = 100μA 100 - V
Forward voltage Vf
If = 5mA
If = 10mA
If = 100mA
0.55
0.67
0.75
0.7
0.82
1.1
V
Reverse leakage current IrVr = 50V
Vr = 100V -300
500 nA
Diode capacitance CdVr = 0V, f = 1MHz - 2 pF
Reverse recovery time trr If = Ir = 10mA
Rl=100Ω - 15 ns
www.element14.com
www.farnell.com
www.newark.com
Page <2> V1.026/02/13
Surface Mount
Switching Diode
Typical Characteristics @ Ta = 25°C unless otherwise specied
www.element14.com
www.farnell.com
www.newark.com
Page <3> V1.026/02/13
Surface Mount
Switching Diode
Plastic surface mounted package
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
Part Number Table
Description Part Number
Surface Mount Switching Diode MMBD7000-7-F
Package Information
Device Package Shipping
MMBD7000-7-F SOT-23 3,000 / Tape & Reel
Soldering Footprint