A-88 APEMwww.apem.com
A
600H and 600NH series
Toggle switches - high amperage
Distinctive features and specifications
❑Construction
Terminal and contact support are manufactured from a single piece of metal. The
contacts are resistance-welded to the terminal for increased mechanical strength.
❑Rating
These switches are suitable for motor loads and power applications up to
15A 250VAC or 10A 400VAC
❑Metal or insulated lever
❑UL, CSA and NF-VDE (EN 61058-1) approved
ELECTRICAL SPECIFICATIONS
• Max. current/voltage ratings : see tables below
• Peak current : 30A max. during 1/2 sine, 250VAC
• Initial contact resistance : 10 mΩmax.
• Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength :
2.000 Vrms 50 Hz min. between terminals
2.500 Vrms 50 Hz min. between terminals and frame
• Electrical life : 10.000 cycles at full load
- FOR INFORMATION-
Max. current/voltage rating w. resistive load
ON - OFF
ON - ON
15A 250VAC
10A 24VDC
15A 12VDC
10.000 cycles
Other
15A 125VAC
12A 250VAC
5A 24VDC
10.000 cycles
ON OFF ON
15A 250VAC
5A 24VDC
6.000 cycles
10.000 cycles
Functions Ratings Electrical life
MODELS
Single and
double pole
Three pole
FUNCTIONS
ON - OFF (1)
ON - ON (6)
Other
(4-5-7-8-9)
ON - OFF (1)
& ON - ON (6)
Other
(4-5-7-8-9)
10A 1/2 HP
125-250VAC
15A 1/2 HP
125-250VAC
10A 1/2 HP
125-250VAC
600H - 600NH
NF-VDEUL
UL 1054
CSA
CSA 22-2 EN 61058-1
15A 1/2 HP
125-250VAC 10(4)A
400VAC
T 85/55 (600H)
T 125/55
(600NH)
APPROVED RATINGS
MATERIALS
• Case : polyester UL94-V0
• Actuator :
- 600H : brass, nickel plated
- 600NH : black polyamide
• Bushing : brass, nickel plated
• Contacts : silver/nickel alloy
GENERAL SPECIFICATIONS
• Torque : 1,50 Nm (1.10 Ft.lb) max. applied to nut
• Panel thickness : 4,5 mm (.177) max. between 2 nuts
• Operating temperature : -20°C to +55°C
The company reserves the right to change specifications without notice.
13-Serie 600H-600NH-A_16-Serie 600H-600NH-A 30/10/14 15:20 Page88
UG1410A
APEM www.apem.com A-89
A
600H and 600NH series
Toggle switches - high amperage
Specifications
AGENCY APPROVALS
Availability : see chart on previous page.
Marking : approved models are standard marked.
PANEL CUT-OUT
MOUNTING RECOMMENDATIONS
Connection
• For quick-connect terminals, use 6,3 x 0,8 mm
normalized female connectors.
• For screw terminals, use :
either 1,5 mm2or 2,5 mm2rigid wires,
or prepared stripped and tin plated flexible wires,
or prepared flexible wires with crimped termination per
EN 50027 (DIN 46228)
Ground connector
Compulsory if the panel is not metallic or not connected
to ground. Should also be used when front face nut is of
plastic material.
Order separately, see section I.
(.20)
(.066)
(.48DIA)
1.70
Ø12.20
5.10
(.377)
Ø12.50
(.492DIA)
(.137DIA)
Ø3.50
9.60
Ø12.20
(.48DIA)
EN 61058-1 EN 61058-1
13-Serie 600H-600NH-A_16-Serie 600H-600NH-A 30/10/14 15:20 Page89
A-90 APEMwww.apem.com
A
600H and 600NH series
Toggle switches - high amperage
Overview
6
SERIES
Number of poles
3Single pole
4Double pole
5Three pole
For 4 pole, see 660
series.
Electrical functions
1ON - OFF
5MOM - ON
6ON - ON
7MOM OFF MOM
8ON OFF MOM
9ON OFF ON
4ON ON ON
ON ON MOM ∆
MOM ON MOM ∆
∆Must not have blank in
"momentary" box.
Momentary
-1R ON ON MOM
-
2R MOM ON MOM
Actuator and terminals
HMetal lever, screw terminals
H/2 Metal lever, solder lug/quick-connect
terminals
NH Insulated lever, screw terminals
NH/2 Insulated lever, solder lug/quick-
connect terminals
NH/3 Insulated lever, normalized quick-
connect terminals
Dimensions : first dimensions are in mm while inches are shown as bracketed numbers.
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
Locking levers
-1V 1 locked position
-2V 2 locked positions
-3V 3 locked positions
Options
For models with metal lever only
TTropicalized case
KFront panel sealing
LBushing 16 mm (.629)
LUXE Chrome finish
TKLUXE Front panel sealing + T and LUXE
GBlack finish
GK Black finish + front panel sealing
G-038 Luminous tip on lever
Security caps are available to prevent inadvertent lever operation. They are presented in section I.
Sealing boots are available on 600H series to protect the switches against dust and water. They are presented in section H.
Mounting accessories : standard hardware supplied with all models :
- 600H and series : 1 hex nut U166 and 1 knurled nut U411
- 600NH series : 1 hex nut U166 and 1 knurled nut U522
Standard and special hardware are presented in section I.
Packaging unit : 25 pieces.
ABOUT THIS SERIES
13-Serie 600H-600NH-A_16-Serie 600H-600NH-A 30/10/14 15:20 Page90
APEM www.apem.com A-91
A
600H series
Toggle switches - high amperage - metal lever
Solder lug/quick-connect terminals - screw terminals
Three pole
Double pole
Single pole
MODEL
STRUCTURE
III II I
2-1 2-3
Solder lug Screw A
631H/2 631H 30° ON - OFF
635H/2 635H 26° MOM - ON
636H/2 636H 30° ON - ON
637H/2 637H 30° MOM OFF MOM
638H/2 638H 36° ON OFF MOM
639H/2 639H 36° ON OFF ON
III II I
2-1 2-3
5-4 5-6
8-7 8-9
Solder lug Screw A
651H/2 651H 24° ON - OFF
655H/2 655H 15° MOM - ON
656H/2 656H 24° ON - ON
657H/2 657H 24° MOM OFF MOM
658H/2 658H 24° ON OFF MOM
659H/2 659H 28° ON OFF ON
III II I
2-1 2-3
5-4 5-6
Solder lug Screw A
641H/2 641H 26° ON - OFF
644H/2 644H* 33° ON ON ON
644H/2-1R 644H-1R* 33° ON ON MOM
644H/2-2R 644H-2R* 33° MOM ON MOM
645H/2 645H 26° MOM - ON
646H/2 646H 26° ON - ON
647H/2 647H 26° MOM OFF MOM
648H/2 648H 26° ON OFF MOM
649H/2 649H 32° ON OFF ON
•2 and 3 maintained or momentary positions
• Solder lug/quick-connect terminals 6,35 x 0,8 (.250 x.031)
or screw terminals + clamp
• 1, 2 and 3 pole configurations
• Normalized quick-connect terminals
(/3) optional. On request.
A= Angle of throw
* Function 4 : SP in DP case - see end of catalogue.
➞Keyway
➞Keyway
➞Keyway
➞Keyway
3 12
(.122DIA)
Ø3.10
4.50
(.177)
(.25x.031)
6.35x0.80
(.031)
(.118DIAx0.50 IS)
Ø3.00x0.50 SI
0.80
6.35
(.25)
III
II
I
0.80
(.031)
A
29.50
7.10 14.90
14.00 17.50 10.50 15.00 11.00
Ø12.00x0.75 SI
(.472DIAx0.75 IS)
(.279) (.586)
(.433)(.59)(.413)(.689)
(1.161)
(.551)
3
2
1
A3
A2
A1
(.689) (.413) (.846) (.433)
(.433)
(1.169)
(.846)
A
(.578)(.267)
21.50 11.0021.4010.5017.50
11.00
14.656.80
29.70
(.472DIAx0.75 IS)
Ø12.00x0.75 SI
0.80
(.031)
III
II
I
B4
B5
B6
(.472DIAx0.75 IS)
147
(.586)(.279)
(.433)(.949)(.413)(.689)
(1.358)
34.50 17.50 10.50 24.00 11.00
14.90
7.10
Ø12.00x0.75 SI
(1.252)
(.472) (.472)
12.00 12.00
31.80
A
(.031)
0.80
I
II
III
258
369
600H/2 600H
Angle of throw with K sealing option :
functions 1, 5, 6, 7 : 26° - functions 8, 9 : 32°
13-Serie 600H-600NH-A_16-Serie 600H-600NH-A 30/10/14 15:20 Page91
A-92 APEMwww.apem.com
A
600H series
Toggle switches - high amperage - metal lever
(.413)
10.50
26.30
(1.035)
2.80
(.110)
TTropicalized diallylphthalate case (-40°C to +85°C)
KFront panel sealing by 1 O-ring and sealing washer.
Protects the switch against water and dust. Panel seal withstands 1 bar
pressure and remains sealed even when switch is operated
LSpecial threaded bushing, length 16 mm (.629)
LUXE Chrome plated lever and cap nut U117
TK LUXE Options T, K and LUXE.
GBlack finish on bushing, lever and nuts.
Includes tropicalization (option T)
GK Front panel sealing by O-ring and sealing washer (as described in option
TK LUXE)
+ option G
G-038 Option G + fluorescent tip on lever.
White fluorescent tip becomes luminous when submitted to ultra violet rays.
-4 30 mm (1.181) long actuator
-5 40 mm ( 1.574) long actuator
-6 Retro style actuator
(gold plated or chrome plated : on request)
• Ergonomic flat plastic actuator : add U282 at the end of
switch model number.
Complete above box with desired options in the same order as below
OPTIONS FOR 600H SERIES ONLY
➀O-ring ➁Sealing washer
K
038
1
2
LOCKING LEVERS (1 and 2 pole models) For 3-pole models, refer to 6000 series.
ACTUATOR OPTIONS (1 and 2 pole models)
-2V-1V -3V
U282
1 locked position 2 locked positions 3 locked positions
➞Keyway
(.763)(.468)
11.90 19.40
(15/32''32NS)
Ø11.90-32NS
19.4011.90
(.468) (.763)
Ø11.90-32NS
(15/32''32NS)
(.811)(.468)
11.90 20.40
(15/32''32NS)
Ø11.90-32NS
-4 -5 -6
13-Serie 600H-600NH-A_16-Serie 600H-600NH-A 30/10/14 15:20 Page92
APEM www.apem.com A-93
A
600NH series
Toggle switches - high amperage - insulated lever
Solder lug/quick-connect terminals - screw terminals
Three pole
Double pole
Single pole
•2 and 3 maintained or momentary positions
• Solder lug/quick-connect terminals 6,35 x 0,8 (.250 x.031) or screw
terminals + clamp
• 1, 2 and 3 pole configurations
• Normalized quick-connect terminals
(/3) optional. On request.
A= Angle of throw
III II I
2-1 2-3
Solder lug Screw A
631NH/2 631NH 28° ON - OFF
635NH/2 635NH 24° MOM - ON
636NH/2 636NH 28° ON - ON
637NH/2 637NH 33° MOM OFF MOM
638NH/2 638NH 33° ON OFF MOM
639NH/2 639NH 33° ON OFF ON
III II I
2-1 2-3
5-4 5-6
8-7 8-9
Solder lug Screw A
651NH/2 651NH 24° ON - OFF
655NH/2 655NH 15° MOM - ON
656NH/2 656NH 24° ON - ON
657NH/2 657NH 24° MOM OFF MOM
658NH/2 658NH 24° ON OFF MOM
659NH/2 659NH 28° ON OFF ON
III II I
2-1 2-3
5-4 5-6
Solder lug Screw A
641NH/2 641NH 26° ON - OFF
644NH/2 644NH 30° ON ON ON
644NH/2-1R 644NH-1R*26° ON ON MOM
644NH/2-2R 644NH-2R*26° MOM ON MOM
645NH/2 645NH 26° MOM - ON
646NH/2 646NH 26° ON - ON
647NH/2 647NH 26° MOM OFF MOM
648NH/2 648NH 30° ON OFF MOM
649NH/2 649NH 30° ON OFF ON
* Function 4 : SP in DP case - see end of catalogue.
➞Keyway
➞Keyway
➞Keyway
➞Keyway
3 12
(.122DIA)
Ø3.10
4.50
(.177)
(.25x.031)
6.35x0.80
(.031)
(.118DIAx0.50 IS)
Ø3.00x0.50 SI
0.80
6.35
(.25)
1
2
3
(.551) (.531) (.453) (.59) (.433)
(.59)(.279)
(1.161)
(.472DIAx0.75 IS)
Ø12.00x0.75 SI
13.50 11.50 15.00 11.0014.00
15.007.10
29.50
A
0.80x6.35
(.031x.25)
I
II
III
A1
A2
A3
(.846) (.531) (.452) (.846) (.433)
(.579)(.267)
(.472DIAx0.75 IS)
Ø12.00x0.75 SI
(1.169)
21.50 13.50 11.50 21.50 11.00
29.70
14.706.80
A
11.00
(.433)
(.031x.25)
0.80x6.35
II
III
I
B4
B5
B6
(.531)
13.50
(.472DIAx0.75 IS)
147
(.586)(.279)
(.433)
(.949)(.44)
(1.358)
34.50 11.20 24.00 11.00
14.90
7.10
Ø12.00x0.75 SI
(1.252)
(.472) (.472)
12.00 12.00
31.80
A
(.031x0.25)
0.80x6.35
III
II
258
369
I
600NH/2 600NH
13-Serie 600H-600NH-A_16-Serie 600H-600NH-A 30/10/14 15:20 Page93
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Apem:
657H/2 636NH/2 648H/2 644H/2 635H 638NH/2 631H/2 651H/2 639H/2 639NH/2 647H/2 659H/2 656H/2
637H/2 658H/2 637NH/2 641H/2 649H/2 638H/2 636H/2 646H/2 644H 631NH/2 647H/2K4 631H/25 631H
631H/22V 631NH 635H/2 635NH 635NH/2 636H 637H 638H 639H 641H 641H/22V 641NH/2 644H/21R
644H/22R 644H1R 644NH/2 645H 645H/2 645NH 645NH/2 646H 646NH/2 646SH/2 647H 647NH/2 648H
648NH/2 649H 649NH/2 651H 651NH 651NH/2 651SH/2 655H 656H 656NH 656NH/2 657H 657NH/2 658H
659H 659NH 659NH/2 631H/21V 631H/2K 635H/2K 635H/2T 636H/21V 636H/22V 636H/2T 636H2V 637H/2K
639H/2K 641H/21V 641H/2TKLUXE 641HK 644H3V 645H/2TKLUXE 646H/22V 646H/2G 646H/2TKLUXE
646H2V 647H/2KX2126 648HK 649H/23V 649H/2G 649H/2GK3V 649H3V 649HK 651H/22V 641H/2K
631HLUXE 639H/23V 637H/25V