EP CONNECTOR SERIES Emboss Tape Interface type 3.5EP Type R 3.5EP Type R * 3.5mm in diameter. Connector for 4-circuit plug (EIAJ RC-5325A-compliant plug) * Normal close, Independent switch The plug with different GND position is also available by adopting the plug and the block electricity switch function. * Round shape This connector shape is available for round shape of adoption chassis. * Adopting two contact points terminal 2 contact points terminal for the GND/MIC terminal is adopted to reduce the electrical resistance. 3.5EP SLANT3 Type * 3.5mm in diameter. Connector for 4-circuit plug (EIAJ RC-5325A-compliant plug) * Normal close, Independent switch The plug with different GND position is also available by adopting the plug and the block electricity switch function. * Insertion and withdrawal forces of plug Lock pin is adopted to improve insertion force feeling and to strengthen withdrawal force of plug. * Biotechnology resin Resin produced by partially using the plantbased raw material for the housing material is adopted. 1 3.5EP SLANT3 Type Specifications ------------------- 3.5EP Type R * Current rating: 2A AC, DC * Voltage rating: 30V AC, DC * Temperature range: -30C to +85C (including temperature rise in applying electrical current) * Contact resistance: Ground contact/20m max. Other contacts/50m max. * Insulation resistance: 1,000M min. * Withstanding voltage: 400V AC/minute 3.5EP SLANT3 Type * Current rating: 2A AC, DC * Voltage rating: 30V AC, DC * Temperature range: -30C to +85C (including temperature rise in applying electrical current) * Contact resistance: Ground contact/20m max. Other contacts/60m max. * Insulation resistance: 1,000M min. * Withstanding voltage: 400V AC/minute * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. EP CONNECTOR SERIES 3.5EP Type R 3.5EP SLANT3 Type 6 6 5 Circuit diagram 13.6 12.6 8.35 3 3 2 2 1 1 0.05 0.05 10.08 0.05 4.45 0.05 0.05 2.7 0.05 0.05 2 4 3 0.05 0.05 1.2 0.05 0.05 1.5 0.05 0.95 6.28 1.55 0.05 2-1.6 0.175 3.6 4 8.18 2.4 0.05 0.05 0.05 1 0.8 6 3 1.3 0.05 5 1.8 2 0.05 1 0.05 6 5 3.6 0.05 1.3 3-1 1.2 0.05 0.05 2.4 1.4 0.05 0.05 4 0.05 1.9 0.05 2.42 4 0.2 7.05 5.42 5 Circuit diagram 0.05 0.05 0.05 Note:1. Viewed from component side. (above figures) 2. Tolerances are non-cumulative: 0.05mm for all centers.The dimensions above should serve as a guideline. Contact JST for details. Connector Type 3.5EP Type R Circuits Type R 6 SLANT3 Type 6.2 0.2 13 Q'ty / reel 1,500 1,000 Material and Finish 0.8 0.5 2.3 Contact: Copper alloy, nickel-undercoated, gold-plated Housing: Thermoplastic resin, UL94-HB, black Lock piin: Stainless 2.84 4.4 0.55 Model No. 3.5EP-R NMP(HF) 3.5EP-SL3-C NMP(HF) RoHS compliance 3.6 3.6 3.5EP SLANT3 Type 8.3 7.3 12.7 0.8 3.6 4.4 2.35 3.6 2