0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Enclosed shaft of the actuator prevents it from dislocation Features Simple FPC insertion 1. Strong actuator retention Actuator will not be dislodged when operating under harsh conditions. 2. Rotating Flip-Lock actuator Rotating actuator permits easy insertion and retention of the FPC. Tactile sensation confirms complete FPC insertion and reliable mechanical and electrical connection. 3. FPC position hold Tabs on each side of the FPC assure correct placement and hold in the connector prior to closing of the actuator. FPC positioning tab 4. Accepts standard FPC thickness 0.3mm thick standard Flexible Printed Circuit (FPC) can be used. Lock 5. Easy solderability on the PC board The soldering leads are on 0.6 mm or 0.8 mm pitch, exiting on the front and back of the connector. 6. Board placement with automatic equipment Flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. Standard reel packaging contains 1000 connectors. 7. Conductive traces on the PCB can run under the connector No exposed contacts on the bottom of the connector. 8. Halogen-free* * As defined by IEC61249-2-21 Br-900ppm maximum, Cl-900ppm maximum, Cl + Br combined-1,500ppm maximum 2013.11w 1 FH30 Series0.3 or 0.4mm pitch, 3mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors Product Specifications 0.3 mm pitch 0.4 mm pitch Operating temperature range -40 to +85C (Note 2) Ratings Current rating(Note 1) Voltage rating 0.3 A 0.15 A Operating humidity range 30 Vrms AC 50 Vrms AC (No condensation) Recommended FPC Storage temperature range -10 to +50C (Note 3) Relative humidity 90% max. Storage humidity range (No condensation) Relative humidity 90% max. Thickness: 0.30.05, Gold plated contact pads Item 1. Insulation resistance 500 Mo min. Specification 2. Withstanding voltage No flashover or insulation breakdown Conditions 100 V DC 0.3 mm pitch: 90 Vrms AC / 1 minute 0.4mm pitch: 150 Vrms AC / 1 minute 150 mo max. * Including FPC conductor resistance Contact resistance: 150 mo max. No damage, cracks, or parts dislocation No electrical discontinuity of 1s or longer Contact resistance: 150 mo max. No damage, cracks, or parts dislocation No electrical discontinuity of 1s or longer Contact resistance: 150 mo max. No damage, cracks, or parts dislocation Contact resistance: 150 mo max. Insulation resistance: 50Mo min. No damage, cracks, or parts dislocation Contact resistance: 150 mo max. Insulation resistance: 50Mo min. No damage, cracks, or parts dislocation No deformation of components affecting performance. 3. Contact resistance 4. Durability 5. Vibration 6. Shock 7. Humidity (Steady state) 8. Temperature cycle 9. Resistance to soldering heat 1 mA AC 20 cycles Frequency: 10 to 55 Hz, single amplitude of 0.75 mm 10 cycles in each of the 3 directions Acceleration of 981m/s2, 6 ms duration, sine half-wave, 3 cycles in each of the 3 axis 96 hours at 40C and humidity of 90 to 95% Temperature: -40C +15C to 35C +85C +15C to 35C Time: -30 2 to 3 +30 +2 to 3 5 cycles Reflow: At the recommended temperature profile Manual soldering: 350C for 5 seconds Note1: When passing the current through all of the contacts, use 70% of the rated current. Note2: Includes temperature rise caused by current flow. Note3: The term "storage" refers to products stored for a long period prior to mounting and use. The operating temperature and humidity range covers the non-conducting condition of connectors after installation on a board. Materials Part Material Finish Insulator LCP Contacts Phosphor bronze Remarks FH30 series Color:Gray FH30M series Color:Beige Gold plated UL94V-0 -------------- Ordering information FH 30 M - 80S - 0.3 SHW (05) 1 2 3 4 5 6 7 q Series name : FH w Series No. : 30 e Blank : 0.3mm pitch M : 0.4 mm pitch r Number of contacts : FH30 series 60, 80, 90 t Contact pitch : 0.3 mm, 0.4 mm y Contact type : SHW(SMT horizontal staggered mounting) FH30M series 80, 96 u Plating specifications : (05)...Gold plated (98)...Gold plated, 500 pieces/reel 2 FH30 Series0.3 or 0.4mm pitch, 3mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors Dimensions A B Q C R (0.12) 9 6.55 Vacuum pick-up surface R (0.12) D 3 4.2 4.85 Vacuum pick-up surface ** 0.8 0.8 (E: FPC insertion slot dimension) Number of contacts indicator Notes 1: The coplanarity of each terminal lead is within 0.1. 2: Packaged on tape and reel only. Check packaging specification. 3: Slight variations in color of the plastic compounds do not affect form ,fit or function of the connector. 4: After reflow, the terminal plating may change color, however this does not represent a quality issue. All dimensions: mm A B C Q R FH30-60S-0.3SHW(05) Part Number 580-0105-8-05 CL No. Number of Contacts FPC contact pitch 60 0.3 21.9 17.7 17.4 17.4 18.35 D E 0.3 0.6 FH30-80S-0.3SHW(05) 580-0100-4-05 80 0.3 27.9 23.7 23.4 23.4 24.35 0.3 0.6 FH30-90S-0.3SHW(05) 580-0106-0-05 90 0.3 30.9 26.7 26.4 26.4 27.35 0.3 0.6 FH30M-80S-0.4SHW(05) 580-0102-0-05 80 0.4 35.8 31.6 31.2 31.2 32.25 0.4 0.8 FH30M-96S-0.4SHW(05) 580-0103-2-05 96 0.4 42.2 38 37.6 37.6 38.65 0.4 0.8 Tape and reel packaging (1,000 pieces/reel, 500 pieces/reel). Order by number of reels. 3 FH30 Series0.3 or 0.4mm pitch, 3mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors Recommended PCB mounting Recommended FPC Dimensions pattern and metal mask dimensions 0.3 B0.05 R0 .2 .2 0.10.05 A 0.070.07 No(n-1) (0.5) C0.05 +0.04 -0.03 No.1 3.20.3 1.40.1 2.650.2 2 No.2 No (n) Q0.02 0.30.05 2 0.3 Mark side R0.05 0.30.07 0.30.03(Land) F0.05 D0.05 G0.1 H MIN Recommended metal mask thickness: t=0.15 Detail A 0.30.07 B0.03 0.250.03(Metal mask) +0.04 -0.03 0.05 MIN 1.70.1 R0.02 00.1 0. R (0.8) (C 0. 5) 2.20.1 0.250.03(Metal mask) 4.20.3 0.30.03(Land) R0.05 1.30.1 1.70.1 3.950.1 Q0.05 R0 J0.1 Note 1 : Conductor width shall be 0.10.05 if FPC has plating bars. All dimensions: mm Part Number CL No. FH30-60S-0.3SHW(05) 580-0105-8-05 Number of Contacts FPC contact pitch 60 0.3 17.7 17.4 17.4 18.3 18.8 19.3 20.3 0.3 B 0.6 FH30-80S-0.3SHW(05) 580-0100-4-05 80 0.3 23.7 23.4 23.4 24.3 24.8 25.3 26.3 0.3 0.6 FH30-90S-0.3SHW(05) 580-0106-0-05 90 0.3 26.7 26.4 26.4 27.3 27.8 28.3 29.3 0.3 0.6 FH30M-80S-0.4SHW(05) 580-0102-0-05 80 0.4 31.6 31.2 31.2 32.2 32.7 33.2 34.2 0.4 0.8 FH30M-96S-0.4SHW(05) 580-0103-2-05 96 0.4 38 C D G H J Material Polyimide R 0.8 Material Thickness (m) 1 mil thick (25) Cover adhesive (25) Surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating Copper foil Cu Base adhesive Thermosetting adhesive 25 Base film Polyimide 1 mil thick 25 Reinforcement material adhesive Thermosetting adhesive 30 Stiffener Polyimide 3 1oz 35 7 mil thick 175 Total 2. Using Double-sided FPC Q 37.6 37.6 38.6 39.1 39.6 40.6 0.4 FH30 Series Recommended FPC Construction 1. Using Single-sided FPC Material Name Covering film layer F Material Name Covering layer film 293 Material Polyimide Material Thickness (m) 1 mil thick Cover adhesive (25) (25) Surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating Through-hole copper Cu Copper foil Cu Base adhesive Thermosetting adhesive 18 Base film Polyimide 25 Base adhesive Thermosetting adhesive Copper foil Cu Cover adhesive Thermosetting adhesive 25 Covering film layer Polyimide 25 15 1/2oz 1 mil thick 1/2oz 1 mil thick Reinforcement material adhesive Thermosetting adhesive Stiffener Polyimide 3 4 mil thick Total 18 18 (18) 50 100 297 * To prevent release of the FPC due to it's bending, use of the double-sided FPC with copper foil on the back side is NOT RECOMMENDED. 3. Precautions 1. This specification is a recommendation for the construction of the FH30 Series FPC (t=0.3 0.05). 2. For details about the construction, please contact the FPC manufacturers. 4 FH30 Series0.3 or 0.4mm pitch, 3mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors Packaging Specifications Embossed Carrier Tape Dimensions Reel Dimensions (4.9) 1.750.1 (T: INSIDE) (O380) 3) (O1 K0.3 (U: OUTSIDE) L0.1 (N) M0.1 0 O1 .5 +0 . 0.40.1 1.5+0.1 0 (6.8) Mounting section Lead section (400mm min.) 1.7 +0.15 0 End section 1.350.1 (O80) 20.15 120.1 1 40.1 Top cover tape Embossed carrier tape No connector inserted (10 pockets min.) Unreeling direction No connector inserted (10 pockets min.) All dimensions: mm CL No. Number of Contacts K L M N T U FH30-60S-0.3SHW(05) 580-0105-8-05 60 44 40.4 20.2 22.1 45.4 49.4 FH30-80S-0.3SHW(05) 580-0100-4-05 80 44 40.4 20.2 28.1 45.4 49.4 FH30-90S-0.3SHW(05) 580-0106-0-05 90 44 40.4 20.2 31.1 45.4 49.4 FH30M-80S-0.4SHW(05) 580-0102-0-05 80 56 52.4 26.2 36 57.4 61.4 FH30M-96S-0.4SHW(05) 580-0103-2-05 96 56 52.4 26.2 42.4 57.4 61.4 Part Number Tape and reel packaging (1,000 pieces/reel). Temperature Profile Using Lead-free Solder Paste MAX 250c 250 Temperature(c) 230c 200 HRS test condition Solder method :Reflow, IR/hot air Environment :Room air Solder composition :Paste, 96.5%Sn/3.0%Ag/0.5%Cu (Senju Metal Industry, Co., Ltd.'s Part 200c Number:M705-221CM5-32-10.5) Test board 150 :Glass epoxy FH30:45801.6mm thick 150c FH30M:701301.6mm thick 100 Land dimensions :0.3mm1.7mm Metal mask :0.15mm thick 0.25mm1.7mm 50 25c (60 sec.) 0 90 to 120 sec. Preheating Start (30 sec.) Soldering The temperature profiles shown are based on the above conditions. In individual applications the actual temperature may Time (Seconds) vary,depending on solder paste type, volume / thickness and board size / thickness. Consult your solder paste and equipment manufacturer for specific recommendations. 5 FH30 Series0.3 or 0.4mm pitch, 3mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors Operation and Precautions Operation and Precautions q Install on the PC board with the actuator open. e Actuator closing after the FPC is fully inserted. Rotate the actuator down to a full stop, pushing it at the center. w FPC Insertion Orient the FPC with the contact pads facing down. Insert in the connector at an angle, assuring that the positioning tabs are placed in the corresponding positioning tab areas on both sides of the insulator body. Lower the FPC to a position parallel to the mounting surface. Verify the correct position by slightly pulling horizontally on the FPC. Positioning tab area (each side) r Removing the FPC Carefully rotate the actuator up, lifting it at the center. Lift the FPC slightly to clear the positioning tabs and withdraw it from the connector. Positioning part 6 FH30 Series0.3 or 0.4mm pitch, 3mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors Precautions Operation and Precautions q Actuator operation The actuator rotates at the center of it's shaft, as illustrated in the figure below. w FPC Insertion and closing of the actuator. Do not insert the FPC on an angle as illustrated in the photograph below. Rotation shaft Be careful not to apply excessive force when operating the actuator from the open position (before the FPC has been inserted). Exercise care not to touch the contacts with fingernails or any other object. Properly insert the FPC positioning tabs into the corresponding areas on both sides of the insulator body. Incorrect FPC insertion Correct FPC insertion During the closing of the actuator do not pull up or push on it directly down. Do not grasp the actuator and pull on it (photograph below). e Make sure that the FPC does not rub against the insertion slot or the contacts, as illustrated on the figure below. 7 FH30 Series0.3 or 0.4mm pitch, 3mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors Operation and Precautions Closing of the actuator. Rotate down pushing it at the center or evenly at each end, as shown on the photographs below. Do not push at one end only. r Opening of the actuator Rotate up, lifting it at the center or evenly at each end of the actuator. Do not lift at one end only. t Forces to the FPC after insertion and closing of the actuator. Do not apply upward pull-force to the FPC close to the connector. If a need arise to route the FPC upward, assure that it is NOT transferring any forces to the closed actuator. 8 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Hirose Electric: FH30-80S-0.3SHW FH30-80S-0.3SHW(05) FH30M-80S-0.4SHW(05) FH30M-96S-0.4SHW(05) FH30-90S0.3SHW(05) FH30-80S-0.3SHW(98) FH30M-96S-0.4SHW(98) FH30-60S-0.3SHW(98) FH30-90S-0.3SHW(98) FH30-60S-0.3SHW(05) FH30M-80S-0.4SHW(98)