T-1 3/4 (5mm) SOLID STATE LAMP Part Number: WP7113ZGC/G Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z Low power consumption. The Green source color devices are made with InGaN Light z Popular T-1 3/4 diameter package. Emitting Diode. z General purpose leads. Static electricity and surge damage the LEDS. z Reliable and rugged. It is recommended to use a wrist band or anti-electrostatic z Long life - solid state reliability. glove when handling the LEDs. z Available on tape and reel. All devices, equipment and machinery must be electrically z RoHS compliant. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAJ8704 REV NO: V.4 DATE: MAR/16/2011 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101026777 Selection Guide Part No. Dice WP7113ZGC/G Iv (mcd) [2] @ 20mA Lens Type Green (InGaN) Water Clear Viewing Angle [1] Min. Typ. 21/2 12000 19000 20 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 520 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 35 nm IF=20mA C Capacitance Green 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.2 4 V IF=20mA IR Reverse Current Green 50 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Lead Solder Temperature [2] 260C For 3 Seconds Lead Solder Temperature [3] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAJ8704 REV NO: V.4 DATE: MAR/16/2011 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101026777 Green WP7113ZGC/G SPEC NO: DSAJ8704 REV NO: V.4 DATE: MAR/16/2011 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101026777 PACKING & LABEL SPECIFICATIONS WP7113ZGC/G SPEC NO: DSAJ8704 REV NO: V.4 DATE: MAR/16/2011 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101026777 SPEC NO: DSAJ8704 REV NO: V.4 DATE: MAR/16/2011 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101026777 SPEC NO: DSAJ8704 REV NO: V.4 DATE: MAR/16/2011 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101026777