170
Dimensions in millimeters (inch) unless otherwise stated
• 7-pin tumbler lock
security
• Keyed alike, keyed
differently or custom key
code options
• Cams sold separately
Material and Finish
Zinc alloy, chrome plated
Performance Details
Average ultimate load on cam:
645 N (145 lbf)
Accessories
See page 169
Installation Notes
1. Install mounting nut and tighten
to 5 Nm (44 inlbf) Max.
2. Install cam to assembly. Properly
orient for rotation and grip.
3. Install lockwasher and cam
mounting nut. Tighten to
2 Nm (18 inlbf).
www.southco.com/PT
H Housing
Length
Number
Housing
Length Stud Length Max. Door
Thickness
112.7 (.50) 8.9 (.35) 5.1 (.20)
217.5 ( .69) 9.5 (.37) 10.9 (.43)
323.8 (.94) 9.5 (.37) 15.9 (.63)
430.5 (1.20) 9.5 (.37) 22.9 (.90)
536.5 (1.44) 9.5 (.37) 28.9 (1.14)
PT - 1 - H C 1 R - 20 K - KC
PT Tubular Key Cam Locks
Fixed core
Lock part number (no cam)
Order lock and cam separately
Cam page 171
K Key removal
B Locked / unlocked removal
L Locked removal only
KC Key Code
KA Keyed alike T0001
(2 keys supplied)
KD Keyed differently
50 key codes (T0001 to T0050)
provided in a non-master key
system (2 keys supplied)
R Rotation
01 Clockwise
09 Counter-clockwise
S Size
1 Standard
STANDARD
ACTUAL
SIZE
MINATURE
ACTUAL
SIZE
Non-Sealed Pin Tumbler
Door
Frame
D
Stud length
Q
Cam grip
Door thickness
Cam forward
Cam reversed
Straight cam
HHousing
length
Frame
Frame
Door
Max. door
thickness (see table)
X
Y
Z
Door
Mounting
nut
Cam
Lockwasher
Cam mounting nut
Housing
(Or screw for minature size)
Series Installation
X Y Z
Standard 16.26 - 16.36
(.640 - .644)
Ø 19±0.2
(.75±.007)
19±2
(.75±.08)
Series Non-Sealed Pin Tumbler
Q D
Standard 6.8 (.27) Ø 22 (.87)
Part Number Selection _______________________________________________________________________________
See table
Other options available. For complete details
on variety, part numbers, installation and
specification, go to
171
Dimensions in millimeters (inch) unless otherwise stated www.southco.com/PT
PT Tubular Key Cam Locks
Cams & installation
PT - S C 09
Installation Material
1. In the TAN section, locate the
cam grip calculated for your
application. If your grip falls
between two values, use the
higher value.
Notes: For cam grips that can be
achieved with multiple housing
lengths, use the value that
results in the shortest housing
possible based on the Max. door
thickness allowed.
2. From this value, move right
horizontally into the Gray
section and verify your door
thickness falls within the Max.
door thickness listed. Once this
is verified, the housing length is
selected and is illustrated by the
housing length number.
3. Returning to your original grip
value in the TAN section, move
down vertically into the GREEN
section. The GREEN section
illustrates the cams that are
appropriate for your grip.
4. By determining the required cam
orientation and style in the BLUE
section, the appropriate cam for
your application is selected.
Cam Grip Max. Door Thickness Housing Length
Number
19.0 (.75) 15.9 (.63) 12.7 (.50) 9.5 (.38) 6.4 (.25) 5.1 (.20) 1
23.8 (.94) 20.7 (.81) 17.5 (.69) 14.3 (.56) 11.2 (.44) 10.9 (.43) 2
30.1 (1.19) 27 (1.06) 23.8 (.94) 20.6 (.81) 17.5 ( .69) 15.9 (.63) 3
36.8 (1.45) 33.7 (1.33) 30.5 (1.20) 27.3 (1.08) 24.2 (.95) 22.9 (.90) 4
42.8 (1.69) 39.7 (1.56) 36.5 (1.44) 33.3 (1.31) 30.2 (1.19) 28.9 (1.14) 5
Cam Part Number Cam Type
Cam Reversed Straight Cam Forward
PT-T409 PT-T209 PT-T009 PT-T209 PT-T409 No Hook
PT-W409 PT-W209 PT-F009 PT-F209 PT-F409 Left
PT-F409 PT-F209 PT-F009 PT-W209 PT-W409 Right
STANDARD
ACTUAL SIZE
MINATURE
ACTUAL SIZE
SHORT
LONG
A
28.6 (1.13)
28.6 (1.13)
B
W - Hook type 2F - Hook type 1
T - No hook
SSS
C
Offset
COffset
COffset
C
Cam Styles
S Cam Style
T No hook
F Hook type 1
W Hook type 2
C Cam Offset
0 No offset
2 3.2 (.125)
4 6.4 (.250)
Series Cam Style T No hook
A B C
Standard 19 (.75) 28.6 (1.13) 3 (.12)
Also use the online configurator at www.southco.com
Standard
A
28.6 (1.13)
28.6 (1.13)
B
W - Hook type 2F - Hook type 1
T - No hook
SSS
C
Offset
COffset
COffset
C
___________________________________________________________________________ Part Number Selection
See table
Order lock and cam separately
Cam part number (no lock)
For Lock selection see page 170
Other options available. For complete details
on variety, part numbers, installation and
specification, go to
