Technical Data
Fluke 719
Electric Pressure Calibrator
One handed pressure calibration
With the innovative, built-in electric pump, the Fluke 719
provides pressure calibration at your fingertips! Now
you can calibrate and test pressure devices quickly and
easily with one hand, saving you valuable time. Use the
programmable pump limit settings to eliminate over-
pressurization, and to set ‘pump to’ pressure values. The
unique cleanout port design reduces pump failures, and
makes the 719 easy to clean without repair. The compact,
lightweight form, combined with one-handed use, makes
this pressure calibrator the ideal tool for busy process
professionals.
• Electricpumpforonehandedpressurecalibration
• Bestinclasspressuremeasurementuncertaintyof0.025%
• MeasureandsourcemAwithbestinclass0.015%accuracy
• Precisionpressureadjustvernier
• Variablereleaseratebleedvalveforeasypressureadjustment
• Idealperformanceforhighaccuracytransmittercalibration
• 30PSIand100PSIpressureranges
• Programmablepumplimit:
-Eliminatesover-pressurization
-Allowstheusertoprogramtargetpressuresforpumping
• Extendedmeasurementrangewithanyoftwenty-nine(29)
700PxxPressureModules
• SourcemAwithsimultaneouspressuremeasurementto
testvalvesandI/Ps
• SimulatemAsignalstotroubleshoot4-20mAloops
• Testpressureswitcheswithbuiltinswitchtestfunction
• Powertransmittersduringtestusing24Vloopsupply
• Provencleanoutportsreducepumpfailures
2FlukeCorporationFluke719ElectricalPressureCalibrator
Fluke Corporation
POBox9090,Everett,WAUSA98206
FlukeEuropeB.V.
POBox1186,5602BD
Eindhoven,TheNetherlands
Formoreinformationcall:
IntheU.S.A.(800)443-5853or
Fax(425)446-5116
InEurope/M-East/Africa+31(0)402675200or
Fax+31(0)402675222
InCanada(800)36-FLUKEor
Fax(905)890-6866
Fromothercountries+1(425)446-5500or
Fax+1(425)446-5116
Webaccess:http://www.fluke.com
©2008FlukeCorporation.
Specificationssubjecttochangewithoutnotice.
PrintedinU.S.A.7/20083346371D-ENRevA
Modification of this document is not permitted
without written permission from Fluke Corporation.
Fluke. Keeping your world
up and running.®
Ordering information
Fluke-71930GElectricPressureCalibrator,
30psi,2bar
Fluke-719 100GElectricPressure
Calibrator,100psi,7bar
Includes:TL75Testleads,AC72Alligator
clipset,Pushfitconnectors,Translucenttest
hose,Productoverviewmanual(print),and
User’smanual(CD-ROM)in14languages
Pump specifications
• Maximumpressuregenerationof120PSI
(8BAR)(100PSImodel)
• Pumpto:
- 30PSIinlessthan15seconds*
- 100psiinlessthan45seconds*
*(with1meterof1/8inchtesthose)
• 5000pumpcyclesbetweenrebuilds
• Totalpumplife20,000calibrationcycle
General specifications
Storage temperature:-30°Cto60°C
Operating temperature:-10°Cto55°C
Relative humidity:95%(-10°Cto30°C);
75%(30°Cto40°C);45%
(40°Cto50°C);35%(50°Cto55°C)
Shock:1meterdroptest
Safety:CSAC22.2No.1010.1:1992
EMC:EN50082-1:1992andEN55022:1994ClassB
Size (HxWxL):60mmx87mmx210mm
(2.19inx3.41inx8.28in)
Weight:912g(2lb)
Battery:Two9Valkalinebatteries
Battery life:12hourswith12mAinto500Ω,200
pumpcyclesto100psi,500pumpcyclesto30psi
Warranty:Three-years,oneyearforpump
Specifications
Function
Measure or Source
Range Resolution Accuracy Notes
Fluke-719 30G -12to36psi,
-850mbarto2.4bar
0.001psi,0.1mbar 0.025%rangefor6
months.
0.035%ofrangefor
one(1)year
Fluke-719 100G -12to120psi,
-850mbarto8bar
0.01psi,1mbar
mA 0to24mA 0.001mA .015%Rdg+2counts Maxload,1000Ω
750Ω ohminHARTmode
Loop supply 24Vdc N/A ±10%