HR30-6P-6S(71) - HIROSE ELECTRIC

1. Small size

Short in length when fully terminated and mated.

2. Water and dust protected

IP67 protection rating: Complete protection against dust penetration and against water

penetration when submerged 1 meter deep for half hour when mated with the corresponding

connector or protective cap.

3. Simple pull lock release

Built-in lock/release mechanism securely locks mated connectors while allowing quick

disconnection by simply pulling on the plug’s release collar. Molded-in grooves prevent finger

slippage when pulled. The round configuration of the collar allows easy side-by-side panel mounting

and will not snag on objects when the cable is pulled-out.

4. Light weight, corrosion resistant

Glass reinforced thermoplastic compounds and noncorrosive components are used in all assemblies.

5. Contact protection and self- alignment

Multiple polarizing keys protect the contacts from missalignment or attempted insertion of

the wrong connector, while assuring correct mating between the corresponding connectors.

6. Visual alignment indicators

Permanent alignment indicators in a contrasting color on all connectors aid in correct alignment

and engagement.

Test and measuring equipment, portable devices, instrumentation, industrial devices,

recreational equipment, I/O applications and other applications requiring use of lightweight,

corrosion resistant quick mate-release cable connections.

Applications

Building on the success of the standard HR30 connector, Hirose now offers a version that

allows for a custom overmold to be applied to the connector. This gives the design engineer

the opportunity to design the overmold that suits the application. Hirose supplies the

un-overmolded connectors and it is up to the design engineer to have the overmold applied

to the connector.

HR30 Series - Overmold Version

Miniature, Waterproof Plastic Connectors

1

With typical example of overmold

The product information in this catalog is for reference only. Please request the engineering drawing for the most current and accurate design information.

All non-RoHS products have been discontinued or will be discontinued soon. Please check the product status on the Hirose website RoHS search at www.hirose-connectors.com or contact your Hirose sales representative.

Ordering Information &

Product Specifications

2

Current rating 5A (3 pos)

2A (6, 10, 12 pos.) Operation Temperature Range -25°C to +85°C

Voltage rating 100V AC, 140V DC (3, 6 pos.)

30V AC, 42V DC (10, 12 pos) Storage Temperature Range -25°C to +85°C

Ratings

Characteristics Specification Conditions

5m ohms max. (3 pos)

15m ohms max. (Solder type: 6, 10, and 12 pos.)

30m ohms max. (Through hole type: 6 and 12 pos.)

2. Insulation resistance 1000M ohms min 100V DC

3. Withstanding voltage No flashover or insulation breakdown 300V AC/one minute

Frequency: 10 to 55 Hz, single amplitude of 0.75mm

1 cycle = 5min, 10 cycles in each of the three directions

Contact resistance 10m ohms min. (3 pos.)

Contact resistance 30m ohms min. (Solder type: 6, 10, and 12 pos.)

Contact resistance 100m ohms min. (through hole type: 6 and 12 pos.)

6. Temperature cycle Insulation resistance 100M ohms min. (-5°C: 30 minutes Room temperature: 10 to 15 minutes +85°C: 30

minutes Room temperature: 10 to 15 minutes) for 5 cycles

Insulation resistance

10M ohms min. (when humidity is high)

100M ohms min. (when dry)

8. Waterproof performance

9. Dust protection

7. Humidity resistance 96 hours at room temperature of 40 ohms and humidity of 90% to 95%

No penetration inside While mated with corresponding or protective cap submerged at depth of 1

meter for 1/2 hour

1. Contact resistance

No Electrical discontinuity of 10 µs or more4. Vibration

1000 cycles

1A DC

5. Durability (mating/unmating)

Assembly Component Material Finish Remarks

PPS Black UL94V-0

PBT Black UL94V-0

Polyacetal Natural -

Gasket Silicone rubber, chloroprene rubber Red/Black -

Contacts Brass, phosphor bronze Gold plated -

Spring Stainless steel - -

Insulator PPS Black UL94V-0

Gasket Chloroprene rubber Black -

Contacts Brass, phosphor bronze Gold plated -

Hexagonal nut Zinc alloy Chromate -

Washer Phosphor bronze Nickel plated -

Crimp Contact

(male/female) Contacts Phosphor bronze Selective gold plated -

Insulator

Plug

Receptacles

HR30 - 6 P A - 6 S C ( )

**

12345678

1

Series Name :HR30 Number of contacts: 3, 6, 10 and 12

Shell Size :Outside diameter/plug mating side Contact type S: Female contact

P: Plug P:

Male contact

R: Receptacle Contact wiring type Blank: Solder

J: Jack C : Crimping

D : Through hole

Blank: Standard

A: Fine wire

Connector type

Variation

Plating (71) : Gold plated (except caps)

5

6

7

8

2

3

4

B: Overmold

5

The product information in this catalog is for reference only. Please request the engineering drawing for the most current and accurate design information.

All non-RoHS products have been discontinued or will be discontinued soon. Please check the product status on the Hirose website RoHS search at www.hirose-connectors.com or contact your Hirose sales representative.

Solder Type Plugs

Crimp Type Plugs

3

Part Number CL No. A Crimp Contact Cable Diameter Range Weight RoHS

HR30-7PB-10SC

HR30-7PB-12SC

HR30-8PB-12PC HR30-PC-211

Yes

HR30-SC-211

Part Number CL No. AB Solder Pot Inner Diameter Cable Diameter Range Weight RoHS

HR30-6PB-3S 1.1 mm

HR30-6PB-6P

HR30-6PB-6S

HR30-7PB-12S

HR30-8PB-12P

Yes

12.6

0.8 mm

0.6 mm15.5

130-0032-7-00

130-0030-1-00

130-0031-4-00

130-0034-2 00

130-0037-0 00

130-0035-5 00

130-0033-0 00

130-0036-8 00

6.4 MAX.

4.7 g

4.4 g

2.91 g

3.1 g

2.84 g

23.2

22.7

25.9

O 6.4 MAX

25.9

4.1 g

4.3 g

5.2 MAX

A (Fully tightened)

O

22.7

ޓޓ

A(Fully tightened)

B

The product information in this catalog is for reference only. Please request the engineering drawing for the most current and accurate design information.

All non-RoHS products have been discontinued or will be discontinued soon. Please check the product status on the Hirose website RoHS search at www.hirose-connectors.com or contact your Hirose sales representative.

HR30-6PB-6S

HR30-7PB-12SC

15.5

Solder and Crimp Type Jacks

Caps

4

Part Number CL No. A B Solder Pot Inner Diameter Cable Diameter Range Weight RoHS

0.8 mm

HR30-7JB-12P

3.6 g

HR30-8JB-12S

HR30-6JB-6P

Yes

0.6 mm

B (Fully tightened)

A

130-2021-1-00

130-2023-7 00

130-2024-0 00

O 12 21.7

23.7

O 15

O 5.2 MAX.

O 6.4 MAX.

2.2 g

4.0 g

B

E

1.4

1.0

C

O

OAO

OD

Part Number CL No. Applicable Connector A B C D E Weight RoHS

HR30-6P-3S(71)

HR30-6P-6S(71)

HR30-6P-6P(71)

HR30-6PA-3S(71)

HR30-6PA-6S(71)

HR30-6PA-6P(71)

HR30-6PB-3S

HR30-6PB-6P

HR30-6PB-6S

HR30-7P-10SC(71)

HR30-7PB-10SC

HR30-7P-12S(71)

HR30-7P-12SC(71)

HR30-7PB-12SC

HR30-8P-12P(71)

HR30-8P-12PC(71)

HR30-8PB-12PC

HR30-6P-C(71)

HR30-7P-C(71)

HR30-8P-C(71)

YES

130-3003-5-71

130-3004-8-71

130-3000-7 -71 8.8

11.4

1g

2g

8.9

10.5

4

616

13 8.4

10.4

HR30-6P-C(71)

HR30-6JB-6P

HR30-7JB-10PC

HR30-7JB-12PC

HR30-8JB-12SC

130-2022-4 00

130-2025-2 00

130-2026-5 00

The product information in this catalog is for reference only. Please request the engineering drawing for the most current and accurate design information.

All non-RoHS products have been discontinued or will be discontinued soon. Please check the product status on the Hirose website RoHS search at www.hirose-connectors.com or contact your Hirose sales representative.

5

Receptacles

Solder Type

ޓ

CD

BGasket

A

E (Thread)

F (Hex nut)

Lock washer

Part Number CL No. ABSolder Pot Inner Diameter Weight RoHS

HR30-6R-3P(71) 1.1mm

HR30-6R-6P(71)

HR30-6R-6S(71)

HR30-7R-12P(71)

HR30-8R-12S(71)

Yes

8.3

9.3

130-1008-8-71

130-1018-1-71

130-1003-4-71

130-1009-0-71

130-1016-6-71

2 g

3.4 g

16

18.4

18.6

C

12

15

D

8.9

11.5

E

M8 x 0.75

M11 x 1

F

10

13

0.8mm

0.6mm

9.3

Gasket

15.5

M11 x 1 (Thread)

13 (Hex nut)

Lock washer

Part Number CL No. Weight RoHS

HR30-7R-10PC(71)

HR30-7R-12PC(71)

HR30-8R-12SC(71)

Yes

130-1014-0-71

130-1012-5-71

130-1013-8-71 3g

Crimp Contact

HR30-PC-211

HR30-SC-211

11.5

O

15

O

D

B

Gasket

A

E (Thread)

F (Hex nut)

Lock washer

2

Part Number CL No. ABWeight RoHS

HR30-6R-6PD(71)

HR30-6R-6SD(71)

HR30-7R-12PD(71)

HR30-8R-12SD(71)

Yes

8.3

9.3

130-1017-9-71

130-1020-3-71

130-1021-6-71

130-1019-4-71

2 g

3.4 g

14.9

15.2

C

12

15

D

8.9

11.5

E

M8 x 0.75

M11 x 1

F

10

13

16

HR30-6R-6P(71)

HR30-8R-12SD(71)

Dip Type

Crimp Type

HR30-7R-12PC(71)

The product information in this catalog is for reference only. Please request the engineering drawing for the most current and accurate design information.

All non-RoHS products have been discontinued or will be discontinued soon. Please check the product status on the Hirose website RoHS search at www.hirose-connectors.com or contact your Hirose sales representative.

6

Crimp Contacts

Note: Use wire size AWG 26 to 30 with a jacket diameter of 1 mm max.

Part Number CL No. Weight RoHS

HR30-SC-111

HR30-SC-211

Yes

130-0023-6

130-0017-3

Packaging Type

100 pcs/bag

10,000 pcs/reel

0.03g/1per pin

Part Number CL No. Weight RoHS

HR30-PC-111

HR30-PC-211 Yes

130-0022-3

130-0016-0

Packaging Type

0.03g/1per pin

100 pcs/bag

10,000 pcs/reel

Part Number CL No. ABWeight RoHS

HR30-6R-3P(71)

HR30-6R-6P(71)

HR30-6R-6PD(71)

HR30-6R-6S(71)

HR30-6R-6SD(71)

Yes

130-3001-0-71

CDE

Applicable Connector

HR30-6R-C(71)

HR30-7R-10PC(71)

HR30-7R-12P(71)

HR30-7R-12PC(71)

HR30-7R-12PD(71)

HR30-8R-12S(71)

HR30-8R-12SC(71)

HR30-8R-12SD(71)

HR30-7R-C(71)

130-3002-2-71

12.6 11.8 7.5 12.1 9.1

1g

15.5 14.8 8.5 15 12.1

Note: When using these caps, do not use the gasket that is normally supplied with the receptacle. The "B" diameter end of the

receptacle cap will serve as the gasket.

o B

o A

o C

1.4

0.9

o D

o E

1.15

1.2

A

11

0.82

11

A

0.82

1.15

1.2

A-A cross section A-A cross section

Receptacle Caps

The product information in this catalog is for reference only. Please request the engineering drawing for the most current and accurate design information.

All non-RoHS products have been discontinued or will be discontinued soon. Please check the product status on the Hirose website RoHS search at www.hirose-connectors.com or contact your Hirose sales representative.

7

Type Description Part Number CL No. Applicable Contact Applicable wire

HR30-SC-111

HR30-PC-111

Automatic Crimping Machine CM-105 901-0005-4 - -

HR30-SC-211

HR30-PC-211

HR30-SC-111

HR30-SC-211

HR30-PC-111

HR30-PC-211

Extraction Tool HR30-TP

AWG #26-#30

-

Manual Manual Crimping Tool HT102/HR30-1

Applicator

Automatic

AP105-HR30-1 901-4571-3

150-0219-2

150-0229-6

Applicable Tools

Alignment mark

HR30-6P-6S(71) HR30-6P-6P(71)

HR30-6P-3S(71)

HR30-7P-10SC(71) HR30-7P-12SC(71) HR30-8P-12PC(71)

Notes 1. The contact configuration depicts a view from the wiring side.

2. Mounting to the panel is accomplished by tightening the hexagonal nut fron the rear side of the panel.

Alignment mark

B+0.05

0

D+0.05

0

C+0.05

0

O

A+0.05

0

A B C D Panel Thickness

3, 6 pos. 1.25 6.45 8.05 3.95 0.7 - 2

10, 12 pos 1.35 9.25 11.05 5.45 0.7 - 3

Contact extraction tool HR30-TP

Automatic contact crimping machine CM105

Manual contact crimping tool HT-102/HR30-1

Notes 1. The receptacle through hole configuration depicts a view from the mating side of the connector.

2. The recommended board maximum thickness: 1.2mm

3. Tolerance of +0.03 mm is recommended for the plated through hole location.

Tolerance of +0.02mm is recommended for the plated through hole diameter.

6R-6PD 6R-6SD 7R-12PD 8R-12SD

Receptacle, Board Mounting Through Hole Pattern

The product information in this catalog is for reference only. Please request the engineering drawing for the most current and accurate design information.

All non-RoHS products have been discontinued or will be discontinued soon. Please check the product status on the Hirose website RoHS search at www.hirose-connectors.com or contact your Hirose sales representative.

Hirose Electric is a leading, global interconnect manufacturer specializing in a wide

range of solutions for advanced technologies.

We have connectors for: automotive, fiber optic, circular, power, mobile/cellular

telephones, board-to-board, wire-to-board, microwave, telecomm, flex circuit (FPC/FFC),

memory card connectors, ribbon cable, mini/micro USB, HDMI and other connectors.

www.hiroseusa.com

No. Cal. Regional Office

Hirose Electric (USA), Inc.

20400 Stevens Creek Blvd.

Suite 250

Cupertino, CA 95014

T: 408-253-9640

F: 408-253-9641

Hirose Electric Co., Ltd

5-23 Osaki 5-Chome

Shinagawa-Ku, Tokyo 141-8587 Japan

T: 81-3-3492-3293 | F: 81-3-3493-2933

Hirose Electric (USA), Inc.

2688 Westhills Court

Simi Valley, CA 93065

Tel: 805-522-7958 | F: 805-522-3217

World Headquarters US Headquarters

8

Attach rep or distributor label here