1 mW 14 Pin DIL Cooled Laser Modules Technical Data LSCX110 Features Description * 1 Milliwatt Optical Output at 25 mA above Threshold, 25C * Center Wavelength between 1280 nm and 1330 nm * Wide Modulation Bandwidth: LSC2110 - 800 MHz LSC4110 - 1.2 GHz * Wide Operating Temperature Range: -40C to +85C * Alternative Package Styles: LSC2110 - 14 Pin DIL LSC4110 - 14 Pin"Butterfly" LSCX110 laser modules are highly reliable fiber optic light sources operating in the 1300 nanometer band. The internal semiconductor lasers are based upon InGaAsP buried heterostructure (BH) technology and fabricated by the Metal Organic Vapor Phase Epitaxy (MOVPE) process, resulting in long lifetimes and modest threshold currents. Applications * Telecommunications * Local Area and Metropolitan Area Networks * Point-to-Point Data Communications * Fiber Optic Sensors * Cable Television * Military Communications and Control Systems * Instrumentation LSCX110 packages include a photodiode for monitoring the laser output, a thermistor for monitoring laser heatsink temperature and a Peltier effect thermoelectric cooler (TEC). A heatsink mounting flange is incorporated into the base of the 14 pin "butterfly" package and a "bullhorn" type flange is used on the 14 pin DIL package. Laser Safety Warning This device is a Class IIIb (3b) Laser Product. It may emit invisible laser radiation if operated with the fiber pigtail disconnected. To avoid possible eye damage do not look into an unconnected fiber pigtail during laser operation. Do not exceed specified operating limits. 460 5963-5308E (1/95) Pin Connections LSC2110 Top View TEC ANODE (+ve SUPPLY TO COOL) 1 TEC 14 TEC CATHODE (-ve SUPPLY TO COOL) NOT CONNECTED 2 13 NOT CONNECTED NOT CONNECTED 3 12 THERMISTOR RESERVED - DO NOT CONNECT 4 11 THERMISTOR CASE GROUND 5 10 LASER ANODE (+ve SUPPLY) CASE GROUND RESERVED - DO NOT CONNECT 6 9 LASER CATHODE (-ve SUPPLY) MONITOR PHOTODIODE CATHODE (+ve SUPPLY) 7 8 MONITOR PHOTODIODE ANODE (-ve SUPPLY) LSC4110 Top View TEC ANODE (+ve SUPPLY TO COOL) 1 THERMISTOR 2 MONITOR PHOTODIODE ANODE (-ve SUPPLY) 3 MONITOR PHOTODIODE CATHODE (+ve SUPPLY) 4 CASE GROUND 5 TEC 14 TEC CATHODE (-ve SUPPLY TO COOL) 13 LASER ANODE (+ve SUPPLY) CASE GROUND 12 NOT CONNECTED 11 LASER CATHODE (-ve SUPPLY) 10 CASE GROUND NOT CONNECTED 6 9 NOT CONNECTED NOT CONNECTED 7 8 NOT CONNECTED 461 LSCX110 Laser Diode Typical Operating Characteristics LASER FORWARD VOLTAGE vs. FORWARD CURRENT SPECTRAL CONTENT 100 80 RELATIVE POWER FORWARD VOLTAGE (V) 1.5 1.0 0.5 60 40 20 0 0 10 20 30 40 50 60 70 0 1290 80 FORWARD CURRENT (mA) FIBER POWER (mW) 1.5 1.0 0.5 0 0 20 40 FORWARD CURRENT (mA) 462 60 MONITOR DIODE PHOTOCURRENT (A) OUTPUT POWER vs. FORWARD CURRENT 2.0 1300 1310 1320 WAVELENGTH (nm) MONITOR PHOTOCURRENT vs. OUTPUT POWER 800 700 600 500 400 300 200 100 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 OUTPUT POWER (mW) Absolute Maximum Ratings Absolute maximum limits mean that no catastrophic damage will occur if the product is subjected to these ratings for short periods, provided each limiting parameter is in isolation and all other parameters have values within the performance specification. It should not be assumed that limiting values of more than one parameter can be applied to the product at the same time. Parameter Symbol Laser Forward Current Laser Reverse Current Laser Reverse Voltage Photodiode Reverse Voltage Photodiode Forward Current Operating Temperature (Case) Storage Temperature Relative Humidity RH Conditions DC DC DC DC DC Pf = 1 mW If Ir VIr Vr Ipf C Ts Fiber Pull Strength Mechanical Shock Limits Min. -40 -40 0-0 Max. Units 150 mA 100 A 2 V 10 V 1 mA +85 C +85 C non%RH condensing - 10 N Mil Std 883, Method 2002, Test Condition A Mil Std 883, Method 2007, Test Condition A Vibration Performance Specifications Parameter Symbol LASER Threshold Current Ith Change with Temperature Peak Optical Output Optical Output Power Slope Efficiency Forward Voltage Differential Resistance Center Wavelength c Change with Temperature Linewidth Rise Time Fall Time Small Signal Frequency Response LSC2110 LSC4110 Test Conditions Test Limits Min. Max. Units Units CW, Rt = 10 k, Tc = ~25C unless otherwise specified Ith Ith/T Pf Pth Vf Rd c c/T r f Bw Bw Tc = 65C to 85C Pf = Pf @ Ith + 25 mA Pth = Pf @ Ith - 2 mA dV/dl Note 1 Tc = 65C to 85C, T = -40C FWHM (2.35 ), Note 1 10% to 90%: Ith to Pf = 1 mW 90% to 10%: Pf = 1 mW to Ith m = 0.8 m = 0.8 5 1 0.04 1280 - 25 2.5 2.5 50 0.1 1.8 10 1330 0.4 5 0.5 0.5 800 1.2 - mA %/C mW W mW/mA V nm nm/C nm ns ns MHz GHz Note: 1. Modulated measurements also available. 463 Performance Specifications (cont'd.) Parameter Symbol Units Rt = 10 k, Tc = ~25C, CW, Pf = 1 mW, Vr = 5 V (Note 2) unless otherwise specified MONITOR PHOTODIODE Photocurrent Responsivity Dark Current Tracking Error Test Limits Min. Max. Test Conditions Im R Id R Pf = 0 mW Im = Im @ (Pf = 1 mW, Tc = 25C) T = -40C, Tc = 85C T = +65C, Tc = -40C 80 0.08 - 800 0.8 20 A A/W nA - 0.5 0.5 dB dB Note: 2. Monitor Photodiode will also operate under zero bias conditions. Parameter Symbol THERMISTOR Test Conditions Test Limits Min. Max. Units Tc = 25C, Pf = 0 mW unless otherwise specified Resistance Temperature Coefficient of Rt Constant Parameter Rt Rt/T Symbol TEC TEC Cooling Current TEC Heating Current Voltage Ic Ih Vc 10.5 Typ -4.4 Typ 3900 9.5 0C to 50C Test Conditions Tc = 25C, Pf = 1 mW unless otherwise specified T = -40C, Tc = 85C T = 65C, Tc = -40C T = -40C to +65C Test Limits Min. Max. - k %dR/K K Units A A V 1.0 1.0 2.0 Fiber Pigtail: Tight jacketed, self-mode stripping, single mode fiber Parameter Length Spot Size (mode radius) Cladding Diameter Core/Cladding Concentricity Secondary Jacket Diameter Effective Cut-off Wavelength Minimum 1.0 4.5 122 0.8 1150 Maximum 5.5 128 1.0 1.0 1240 Units m m m m mm nm Hewlett-Packard can offer a ruggedized fiber pigtail for this product range if extreme mechanical strength is required. The pigtail length can be customized to your specific length, with a connector, to a tolerance of 25 mm. 464 LSC2110 Mechanical Outline S U B A FIBER PIGTAIL N F C K L T M J P D R E G H DIM. A B C D E F G H J MIN. MAX. 20.98 20.68 1.10 0.90 13.00 12.55 9.60 8.51 6.60 6.10 7.62 NOM. 2.54 NOM. 0.457 NOM. 7.21 7.01 DIM. K L M N P R S T U MIN. MAX. 19.05 NOM. 25.70 25.10 30.00 NOM. 4.20 - - 1000 6.20 5.80 6.00 NOM. - 6.00 3.17 NOM. ALL DIMENSIONS IN MILLIMETERS 465 LSC4110 Mechanical Outline A S B T FIBER PIGTAIL R C F I J H M L K N D P G E DIM. A B C D E F G H I MIN. MAX. 30.15 29.85 20.95 20.65 12.75 12.45 9.35 9.05 1.60 1.40 6.10 4.90 5.75 5.45 2.54 NOM. 0.38 NOM. ALL DIMENSIONS IN MILLIMETERS 466 DIM. J K L M N P R S T MIN. MAX. 0.25 NOM. 19.05 NOM. 30.00 NOM. - 1000 4.35 4.05 5.55 5.25 9.15 8.85 26.15 25.85 2.10 1.90 Ordering Information LSCX110 - XX Connector Type: FP = FC/PC ST = ST(R) SC = SC DN = DIN BI = Biconic D4 = D4 SF = Super Polish FC/PC Package Style: 2 = 14 PIN DIL 4 = 14 PIN "Butterfly" Handling Precautions 1. The LSCX110 can be damaged by current surges or overvoltage. 2. Power supply transient precautions should be taken. 3. Normal handling precautions for electrostatic sensitive devices should be taken. CDRH Certification Laser Warning Hewlett-Packard Ltd Whitehouse Road Ipswich, Suffolk IP1 5PB England Manufactured: ____ Serial No. ____ Model No. ____________ This product conforms to the applicable requirements of 21 CFR 1040 at the date of manufacture. ST(R) is a Registered Trademark of AT&T. 467