HTE Series Powertron * * * * * * * Resistances from 200Ohms to 700MOhms Power Rating 0.7 to 17Watts Resistance Tolerances to 1% Low TCR: 100ppm/K Standard Voltage Ratings to 48KV Non-Inductive Design SMD upon request SPECIFICATIONS Type Wattage Rating ( Watts ) Dimensions (special dimensions possible) 0.062" [1.6mm] 0.031" [0.8mm] 0.002" [0.05mm] C Maximum Working Voltage (KV ACrms)) A B HTE15 0.7 0.590 [15.0] 0.197 [5.0] 0.032 [0.8] 2.5 HTE19 1 0.748 [19.0] 0.197 [5.0] 0.032 [0.8] 3.5 HTE24 2 0.944 [24.0] 0.314 [8.0] 0.040 [1.0] 5.5 HTE25 1.2 1.00 [25.4] 0.197 [5.0] 0.032 [0.8] 5.5 HTE39 3 1.535 [39.0] 0.314 [8.0] 0.040 [1.0] 10 HTE52 5 2.05 [52.0] 0.314 [8.0] 0.040 [1.0] 15 HTE76 8 2.99 [76.0] 0.354 [9.0] 0.040 [1.0] 22.5 HTE102 12 4.02 [102] 0.354 [9.0] 0.040 [1.0] 32 HTE127 12 5.00 [127] 0.354 [9.0] 0.040 [1.0] 40 HTE152 15 5.98 [152] 0.354 [9.0] 0.040 [1.0] 48 Ordering Information Part Number - Resistance - Tolerance - TCR ( If not standard ) Example: HTE39 10MOhm 1% Document Number: 64308 Revision: 20-09-10 For technical questions, contact: powertron@vishaypg.com www.powertron.de 1 HTE Series Powertron SPECIFICATIONS (continued) Specification Value Resistance Range 200 Ohms to 700MOhms Tolerances 1% to 10% Temperature Coefficient 100ppm/K : -25C to +125C ( Standard ) 20 to 150 ppm/K ( On Request ) Temperature Range -55C to +195C Insulation Resistance >10000 MOhms Encapsulation Epoxy Conformal Coating / silicon or glass upon request Environmental Performance DR Load Life 0.7% Moisture Resistance 0.4% Thermal Shock 0.4% 5X Overload ( 5s ) 0.5% (MIL-STD 202) Power Derating Curve 120 Power ( % ) 100 80 60 40 20 0 0 50 100 150 200 250 300 350 400 Ambient Temperature (C) www.powertron.de 2 For technical questions, contact: powertron@vishaypg.com Document Number: 64308 Revision: 20-09-10 Legal Disclaimer Notice Vishay Precision Group Disclaimer ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE. Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay Precision Group"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. The product specifications do not expand or otherwise modify Vishay Precision Group's terms and conditions of purchase, including but not limited to, the warranty expressed therein. Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Information provided in datasheets and/or specifications may vary from actual results in different applications and performance may vary over time. Statements regarding the suitability of products for certain types of applications are based on Vishay Precision Group's knowledge of typical requirements that are often placed on Vishay Precision Group products. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any conduct of Vishay Precision Group. The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document No.: 63999 Revision: 27-Apr-11 www.vishaypg.com 1