Table of Contents Page No.
Amphe-Lite* Series - Amphenol’s Ultimate Commercial Subminiature Connector . . . . . . . . . . 1
Performance Criteria, Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Insert Availability and Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Alternate Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Insert Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 8
Shell Styles
AL00 Wall Mounting Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
AL06 Straight Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
AL07 Jam Nut Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Accessories
Receptacle Protection Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Plug Protection Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Dummy Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cable Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Contacts, Sealing Plugs, Plastic Dust Caps . . . . . . . . . . . . . . . . . . . . . . . . . 16
Contacts (Printed Circuit Board, Wire wrap) . . . . . . . . . . . . . . . . . . . . . . . . . 17
Fiber Optic Termini . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 - 20
Application Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
How to Order Amphe-Lite Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Amphe-Lite Capabilities (Fiber Optics, Coax Contacts, Flex Terminations, PC Tails) . . . . . . . . . 23
Amphe-Lite Capabilities (Non-Magnetic, Ground Plane Connectors, Twinax & Power Contacts) . . . . 24
Sales Office Listing
Please visit our Website at www.amphenol-industrial.com
Also visit www.amphenol-aerospace.com. Amphenol Industrial Operations and Amphenol Aerospace
are both located at Sidney, NY. Together with other Amphenol divisions worldwide, Amphenol offers
one of the broadest ranges of interconnect products in the marketplace.
Amphenol Aerospace and Amphenol Industrial Operations operate quality systems that are certified to
ISO-9001 and AS-9100 by third party registrars.
* Amphe-Lite is a registered trademark of Amphenol Corporation.
1
Quick Coupling
Thread
Coupling Nut
Plug
Shell Spring Fingers (EMI)
Anti-Decoupling
Device
Ratchet
Amphe-Lite Shell Styles
wall mount
receptacle
straight plug
jam nut
receptacle
Commercial 38999, Series III Type Composite Connectors
The Amphe-Lite Connector Series is designed for communications equip-
ment manufacturers with signal, power, RF or fiber optic interconnect
requirements in harsh environments such as communication towers, out-
door and roof-top applications. This commercial 38999, Series III type
com posite connector series is i deal f or comm unicat ions equipm ent, manu-
factur ing proce ss control and medical equi pm ent.
The Amphe-Lite offers the highest performance capabilities for severe
environment ap plica ti ons, and yet is cost eff ecti ve enough for general duty
and non-environmental applications.
The Amphe-Lite is UL Recognized, file E115497.
RoHS Compliant Product Availa ble -
Consult Amphenol Industrial Op erat ions.
Features and Bene fits of the Amphe-Lite Series:
• Service Class F Amphe-Lite connectors provide excellent EMI shield-
ing and grounding through electro less ni ckel pl ati ng and spri ng ground-
ing rings. Environmental sealing is ensured with interfacial seals to
prevent contact corrosion. Composite shells are completely immune to
corrosi on probl em s.
• Service Class U provides a non-conductive shell when EMI shiel ding is
not a cri teria.
• Class F Composite shells resist severe corrosion, and provide plating
endurance fr om salt spray exposure for a minimum of 2000 hour s.
• Compl etel y m ates i n one 360-degr ee turn of the coupling nut to provi de
the fastest and easiest equipment assembly and maintenance possi-
ble.
• Acme threads provide coupling durability. Thicker wall sections and a
greater coupling surface area improve strength and shock resistance.
Blunting of the thread on both the coupling nut and receptacle elimi-
nates cross coupling.
• Recessed pins minimize potential contact damage in this 100% scoop-
proof connector. In a blind mating application, mating shells cannot
“scoop” t he pins and cause a shorting or bending of cont acts.
• A rigid dielectric insert with excellent electrical characteristics provides
durabl e prote ction t o the contact s. The socke t contact s are probe pr oof,
and all contacts are rear insertable and rear removable. Available in
sizes 10 power, 12, 16, 20 and 22D contacts are plated in the standard
50 micro inches minimum gold, with 100 micro inches as an option.
Optional Features:
• Con ductiv e and non-conduct ive options are availabl e. See pg. 22.
• Amphe-Lite connectors allow for use of many contact types: fiber
optics, shielded coaxial, twinax ground plane versions, and power con-
tacts. (See pages 23, 24). Consult Amphenol Industrial for more infor-
mation on combinations of different types of contacts in one connector
shell - what Amphenol calls their new “Combo-C” inserts.
• Non-magnetic Amphe-Lite is a new variation - Amphenol offers one of
the few 100% non-magnetic connector s wit h high cont act densi ty avai l-
able today. See page 24.
Amphe-Lite Series
Amphenol’s ultimate commercial
subminiature connector
Designed for Performance
Numerous advantages in performance capability are
designed into the Amphenol® Amphe-Lite Connector.
A positive shoulder to shoulder coupling design,
grounding fingers, and electroless nickel plating pro-
vide superior EMI shielding capability of 65 dB mini-
mum at 10 GHz.
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
UL
®
2
140
120
100
80
60
40
20
0
100 200 300 400 500 600 700 800
TYPICAL SHIELDING EFFECTIVENESS TEST DATA
EMI Shielding Effectivess dB
Testing by Triaxial Method
Shielding Effectiveness
Amphe-Lite Connectors
(Nickel Finish at –55˚C to +125 ˚C)
dB
FREQUENCY MEGAHERTZ
140
120
100
80
60
40
20
012345678910
TYPICAL SHIELDING EFFECTIVENESS TEST DATA
EMI Shielding Effectivess dB
Testing by Mode Stirring Method
Shielding Effectiveness
Amphe-Lite Connectors
(Nickel Finish at –55˚C to +125 ˚C)
dB
FREQUENCY GIGAHERTZ
Amphe-Lite Series
performance criteria,
specifications
Amphenol® Amphe-Lite connectors provide EMI
shielding capability which exceeds MIL-DTL-
38999 Series III requirements.
The Amphe-Lite connector with EMI grounding
fingers and conductive finishes has proven to be
the ultimate in EMI shielding effectiveness. The
charts at right illustrate shielding effectiveness
data which is typical of connectors tested with
the nickel finish over a w ide frequency range.
These capabilities along with a 125°C tempera-
ture rating and superior moisture sealing protec-
tion provide the user with a connector that can
withstand the most rigorous application. UL RTI
rating is 105°C.
* When using silver plated wire.
** Please note that the establishment of electrical factors is left
entirely in the designers hands, since he is in the best position to
know what voltage, switching surges, transients, etc. can be
expected in a particular circuit.
CONTAC T RATING
Contact
Size
Test Cur r en t Maximum
Millivolt Drop
Crimp*Crimp Hermetic
22D 5 3 73
20 7.5 5 55
16 13 10 49
12 23 17 42
10 ( Power ) 33 NA 33
Contact Size
C r imp W ell Data
Well
Diameter Nominal Well
Depth
22D .0345 ±.0010 .141
20 .047 ±.001 .209
16 .067 ±.001 .209
12 .100 ±.002 .209
10 ( Power) .13 7 ±.0 02 . 35 5
SERVICE RATING
Service
Rating
Suggested Operating
Voltage (Sea Level) Test Voltage
(Sea Lev el )AC (RMS) DC
M 400 550 1300 VRMS
N 300 450 1000 VRMS
I 600 850 1800 VRMS
II 900 1250 2300 VRMS
FINISH DATA
Amphe -lite connect ors are availabl e in t he fol lowin g fi nishes:
• Con ductive Electroless Ni ckel Plated Composite (Servi ce Class F)
• Black Composite, unplated (Service Class U)
See how to order page 22.
Test data beyond 2GHz is subject to equipment variation.
3
Shell
Size/Arrg. Service
Rating Total
Contacts
Contact Size
22D 20 16 12 12
(Coax) 10
(Power) 8
(Coax) 8††
(Twinax)
9-35 M 6 6
9-94 M 2 2
9-98 I 3 3
11-2★I2 2
11-5 I 5 5
11-35 M 13 13
11-98 I 6 6
11-99 I 7 7
13-4★I4 4
13-8 I 8 8
13-13 I, Fiber Optic 4 2* 2
13-35 M 22 22
13-98 I 10 10
15-5★II 5 5
15-15 I 15 14 1
15-18 I 18 18
15-19 I 19 19
15-35 M 37 37
15-97 I 12 8 4
15-AC M 26 24 2
17-2 M 39 38 1
17-6 I 6 6
17-8★II 8 8
17-22★NA 4 2 2
17-26 I 26 26
17-31 M 19 4 11 4
17-35 M 55 55
17-99 I 23 21 2
19-11★II 11 11
19-31 M 15 12 1 2
19-32 I 32 32
19-35 M 66 66
21-11★I11 11
21-16★II 16 16
21-35 M 79 79
21-39 I 39 37 2
21-41 I 41 41
21-75★M4 (See Note)
23-6★M6 6
23-21★II 21 21
23-35 M 100 100
23-53 I 53 53
23-54 M 53 40 9 4
23-55 I 55 55
25-4 I 56 48 8
25-7 NA 99 97 2
25-8★NA 8 8
25-11 N 11 2 9
25-17 M 42 36 6
25-19★I19 19
25-20 N 30 10 13* 4 3
25-24★I24 1212
25-26 I 25 16 5 4
25-29★I29 29
25-35 M 128 128
25-37★I37 37
25-43 I 43 23 20
25-46 I 46 40 4 2†
25-61 I 61 61
★Ground plane proprietary option available. Arrg. 9-5 is exclusively
ground plane type. See page 24 for further information of ground plane
connectors.
*
Ti16ttdditdtfib tiCltSidNY
† For RG180/U and RG195/U cables only. (Contact Sidney,
NY for other cable application).
†† Size 8 Coax and Twinax are interchangeable.
Amphe-Lite Series
insert availability an d identificati on
4
MAS TER KEY/KEYWAY POSITION
Shell
Size
Ke y & keywa y
arrangement
identification letter
AR°
or
AP°
BSC
BR°
or
BP°
BSC
CR°
or
CP°
BSC
DR°
or
DP°
BSC
9
N
A
B
C
D
E
105
102
80
35
64
91
140
132
118
140
155
131
215
248
230
205
234
197
265
320
312
275
304
240
11,
13,
and
15
N
A
B
C
D
E
95
113
90
53
119
51
141
156
145
156
146
141
208
182
195
220
176
184
236
292
252
255
298
242
17
and
19
N
A
B
C
D
E
80
135
49
66
62
79
142
170
169
140
145
153
196
200
200
200
180
197
293
310
244
257
280
272
21,
23,
and
25
N
A
B
C
D
E
80
135
49
66
62
79
142
170
169
140
145
153
196
200
200
200
180
197
293
310
244
257
280
272
A plug with a given rotation letter will mate with a receptacle
with the same rotation letter. The angles for a given connector
are the same whether it contains pins or sockets. Inserts are
not rot ated in conjunct ion with the master key/keyway.
Amphe-Lite Series
alternate insert positioning
MAIN
KEYWAY
AR
BSC
BR
BSC
CR
BSC
DR
BSC
˚
˚
˚
˚
MAIN
KEYWAY
AP
BSC
˚
BP
BSC
˚
CP
BSC
˚
DP
BSC
˚
RECEPTACLE
(front face shown)
PLUG
(front face shown)
5
51
6
432
BA
CA
B
AB A
B
C
D
E
123
4
5
6
7
8
910
11 1213
AB
CD
EF
A
B
C
D
EF
G
A
B
C
D
AB
C
D
E
FG
H
1
21
22
AB
C
D
E
F
G
H
JK
AB
CD
E
AB
C
D
E
F
G
H
J
KLM
N
P
R
AB
C
D
E
F
G
H
J
KLMN
P
R
S
TU
ABC
D
E
FG
H
J
K
LMNP
R
S
T
UV
1
21
31
ABC
D
E
F
G
H
JKL
M
1
6
11
17
30
A
B
C
D
E
F
A
B
C
DE
F
G
H
1
3
4
9
10
16
17
24
25
31
32
39
40 47
46
52
53
55
ABC
D
E
F
G
H
J
K
L
M
N
P
RSTU
V
W
X
YZ
A
D
C
B
ABC
D
E
F
G
H
J
K
L
M
N
PRSTU
V
W
X
Y
Z
ab
c
A
BC
D
front face of pin inserts illustrated
Amphe-Lite Series
insert arrangements
Insert Arrangement 9-35 9-94 9-98 11-2 11-5 11-35 11-98 11-99 13-4
Service Rating M M I I I M I I I
Number of Contact 6 2 3 2 5 13 6 7 4
Contact Size 22D 20 20 16 20 22D 20 20 16
Insert Arrangement 13-8 13-13 13-35 13-98 15-5 15-15 15-18
Service Rating I I, Fiber Optic M I II I I
Number of Contacts 8 2 2 22 10 5 14 1 18
Contact Size 20 16 12 22D 20 16 20 16 20
Dedicated to
Fiber Optics
Insert Arrangement 15-19 15-35 15-97 15-AC 17-2 17-6
Service Rating I M I M M I
Number of Contacts 19 37 8 4 24 2 38 1 6
Contact Size 20 22D 20 16 22D 16 22D 8 Twinax 12
Insert Arrangement 17-8 17-22 17-26 17-31 17-35 17-99
Service Rating II Coax I M M I
Number of Contacts 8 2 2 26 4 11 4 55 21 2
Contact Size 16 12 Coax 8 Coax 20 22D 20 16 22D 20 16
CONTACT LEGEND 8 10 12 16 20 22D
A
B
C
D
LMN
P
V
U
K
JTR
H
GFE
S
1
234
5
6
7
89
10
11
12
13
1415 16
17 18
19
20
23 26
21
22
24 25
6
A
B
C
D
E
F
G
H
J
K
L
A
B
C
E
K
M
N
R
S
U
V
W
g
h
f
ABC
D
E
F
G
H
J
K
L
M
N
P
RSTUV
W
X
Y
Z
a
b
c
d
ef
g
h
j
1
2
3
4
9
10
16
17
24
25
33
34
42
43
50
51
57
58
63
64
66
A
B
C
D
E
F
G
H
J
KL
A
B
C
D
E
F
G
H
J
K
L
M
N
PR
S
1
11
21
31
41
51
61 71
79
ABCD
E
F
G
H
J
K
L
M
N
P
R
STUVW
XYZa
b
c
d
ef
g
h
ijkm
n
p
q
r
ABCD
E
F
G
H
J
K
L
M
N
P
R
S
T
UVW
XY
Z
a
b
c
d
e
f
g
h
ijkm
n
p
q
r
st
A
BC
D
A
B
C
D
EF
A
B
C
D
E
F
G
H
J
K
L
MP
R
S
N
T
U
V
WX
1
2
34
56
7
8
15
16
24
25
34
35
45
46
55
56
66
67
76
77
85
86
93
94
9596
9798
99
100
front face of pin inserts illustrated
Amphe-Lite Series
insert arrangements
Insert Arran gement 19-11 19-31 19-32 19-35 21-11
Servic e Ratin g II M I M I
Number of Contacts 11 2 1 12 32 66 11
Contact Size 16 8 Coax 12 22D 20 22D 12
Insert Arran gement 21-16 21-35 21-39 21-41
Servic e Ratin g II M I I
Number of Contacts 16 79 37 2 41
Contact Size 16 22D 20 16 20
Insert Arran gement 21-75 23-6 23-21 23-35
Servic e Ratin g M M II M
Number of Co ntacts 4 6 21 100
Contact Size 8 Coax 8 Tw inax 16 22D
CONTACT LEGEND 8 10 12 16 20 22D
Note: Size 8 cavities can be supplied with either twinax or coax per
custom er requireme nt.
7
ABCD
E
F
G
H
J
K
L
M
NPRSTUVW
X
Y
Z
a
b
c
d
e
f
g
h
k
mnpqr
s
t
AB
u
v
w
x
y
zAB
CC
DD
EE
FF
GG HH
123456
7
8
9
10
11
12
13
14
15
16
17
18
19
2021222324 25 2627
28
29 30
31
32
33
34
35
36
37
38
39
40
41
42
4344 45 46
47
48
4950
51
52
53
ABCD
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
YZabcd
ef
g
h
k
m
n
p
q
r
t
uvw
xy
z
sJJ
KK
LL
AA
BBCC
DD
EE
FF GG
HH
1
6
7
15
16
18
19
21
22
24
26
28
29
32
33
41
42
46
53
59
60
64
67
68
72
74
76
78
79
81
82
84
85
93
94
99
25 75
AB
C
D
E
F
G
H
AB
C
D
E
F
G
HJ
KL
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
TU
V
W
X
Y
Z
abcd
e
f
g
h
k
m
n
p
qrst
u
v
w
AB
C
D
E
FGH
J
K
L
M
NP
R
ST
UV
ABC
D
E
F
G
H
J
K
L
M
N
P
R
S
TUVWXY
Z
a
b
c
d
e
f
g
h
i
j
k
mnpqr
s
t
v
w
x
y
zAA BB CC
uDD
EE
FF
GG HH
fr ont face of pin inserts il lust rated
Amphe-Lite Series
insert arrangements
Insert Arran gement 23-53 23-54 23-55
Servic e Ratin g I M I
Number of Contacts 53 40 9 4 55
Contact Size 20 22D 16 12 20
Insert Arran gement 25-4 25-7 25-8
Servic e Ratin g I NA N A
Number of Contacts 48 8 97 2 8
Contac t Size 20 16 22D 8 Twin ax 8 Twi n ax
Insert Arran gement 25-11 25-17 25-19
Servic e Ratin g N M I
Number of Contacts 2 9 36 6 19
Contact Size 20 10 Power 22D 8 Twinax 12
CONTACT LEGEND 8 10 12 16 20 22D
8
AB
C
D
E
F
G
H
J
K
L
M
N
P
RS
T
U
V
W
X
Y
Z
1
2
3
4
5
6
7
AB
C
D
E
F
G
H
J
K
L
M
N
PRS
T
U
V
W
X
YZ
a
1
2
3
4
5
6
7
8
9
10
11
12
13 14
15
16
17
18 19 20 21
22
23
24
25
AB
C
D
E
F
G
H
J
K
L
M
N
P
RST
U
V
W
X
Y
Z
a
bc
d
e
f
1
4
7
8
14
15
24
25
35
36
47
48
58
59
70
71
81
82
93
94
104
105
114
115
121
125
128
ABC
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
VW
X
Y
Z
a
b
c
d
e
fg
hk
m
n
p
qr
ABCD
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
WXYZa
b
c
d
e
f
g
h
k
m
np
q
r
s
tu
v
w
x
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
VW
XY
Za
b
c
d
e
f
g
h
k
m
n
p
qr
stuv
w
x
y
z
AA
ABC
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
XYZ
abcd
e
f
g
h
i
j
k
m
n
p
q
r
s
tuv
wx
y
z
BB
CC
DD
EE
FF GG HH
JJ
KK
LL
MM
NN
AA
PP
fr ont face of pin inserts il lust rated
Amphe-Lite Series
insert arrangements
Insert Arran gement 25-20 25-24 25-26
Servic e Ratin g N I I
Number of Contacts 10 13 3 4 12 12 16 5 4
Contact Size 20 16 8 Twinax 12 Coax 16 12 20 12 8 Coax
Insert Arran gement 25-29 25-35 25-37
Servic e Ratin g I M I
Number of Contacts 29 128 37
Contact Size 16 22D 16
Insert Arran gement 25-43 25-46 25-61
Servic e Ratin g I I I
Number of Contacts 23 20 40 4 2 61
Contact Size 20 16 20 16 8 Coax† 20
† Coax contacts for RG180 or RG195 cable.
CONTACT LEGEND 8 10 12 16 20 22D
(Locations U and Y - Dedicated to
Fiber Optics)
9
Amphe-Lite Series
AL00 wall mounting receptacle, composite
All dimensions for reference only Designates true position dimensioning
Millimeters
Shell
Size L
Max.
M
+.00
–.13 R1R2S
Max
T
+.20
–.13
V
Thread
Metric Z
Max. AA
Max. LL
±.13
TT
+.20
–.13
9 13.06 19.69 18.26 15.09 24.1 3.25 M12X1-6g 5.03 5.94 23.19 5.49
11 13.06 19.69 20.62 18.26 26.5 3.25 M15X1-6g 5.03 5.94 23.19 4.93
13 13.06 19.69 23.01 20.62 28.9 3.25 M18X1-6g 5.03 5.94 23.19 4.93
15 13.06 19.69 24.61 23.01 31.3 3.25 M22X1-6g 5.03 5.94 23.19 4.39
17 13.06 19.69 26.97 24.61 33.7 3.25 M25X1-6g 5.03 5.94 23.19 4.93
19 13.06 19.69 29.36 26.97 36.9 3.25 M28X1-6g 5.03 5.94 23.19 4.93
21 13.84 18.92 31.75 29.36 40.1 3.25 M31X1-6g 5.79 5.18 23.14 4.93
23 13.84 18.92 34.93 31.75 43.3 3.91 M34X1-6g 5.79 5.18 23.14 6.15
25 13.84 18.92 38.10 34.93 46.4 3.91 M37X1-6g 5.79 5.18 23.14 6.15
AL00F ( )*
AL00FD ( )*
AL00U ( )*
AL00UD( )*
Inches
Shell
Size
B Thread
Cl ass 2A
0.1P-0.3L-TS
(Plated) L
Max.
M
+.000
–.005 R1R2S
Max.
T
+.008
–.006 Z
Max.
AA
Max.
Panel
Thickness LL
±.005
TT
+.008
–.006
9 .6250 .514 .775 .7 19 .594 .948 .128 .198 .234 .913 .21 6
11 .7500 .514 .775 .812 .719 1.043 .128 .198 .234 .913 .194
13 .8750 .514 .775 .906 .812 1.137 .128 .198 .234 .913 .194
15 1.0000 .514 .775 .969 .906 1.232 .128 .198 .234 .913 .173
17 1.1875 .514 .775 1.062 .969 1.323 .128 .198 .234 .913 .194
19 1.2500 .514 .775 1.156 1.062 1.449 .128 .198 .234 .913 .194
21 1.3750 .545 .745 1.250 1.156 1.575 .128 .228 .204 .911 .194
23 1.5000 .545 .745 1.375 1.250 1.701 .154 .228 .204 .911 .242
25 1.6250 .545 .745 1.500 1.375 1.823 .154 .228 .204 .911 .242
* To comp lete order number, see page 22.
M
M
.005
.13
T
4 PLACES
TT
4 PLACES
S
2 PLACES
2 PLACES
2 PLACES
R
1
R
2
V THREAD
AA
B
THREAD
LL
ML
1.240 MAX
31.50 MAX
–A–
Z
.909 MAX
23.09 MAX
1.084 MAX
27.53 MAX
D
VIEW D
FOR SIZE 8 TWINAX ONLY,
RELA TIVE TO
VIEW D
FOR SIZE 8 COAXIAL ONLY,
RELA TIVE TO
–A–
–A–
10
.359 MAX
9.12 MAX
1.234 MAX
31.34 MAX 1.656 MAX
42.06 MAX
1.797 MAX
45.64 MAX
VIEW D
FOR SIZE 8 TWINAX ONLY,
RELA TIVE TO
VIEW D
FOR SIZE 8 COAXIAL ONLY,
RELA TIVE TO
–A–
–A–
V THREAD
.591 +.003
–.000
15.01 +.08
–.00
–A–
Q
B THREAD
D
* To complete order number see page 22.
Amphe-Lite Series
AL06 str a ig ht pl ug , comp osit e
Millimeters
Shell
Size Q
Max.
V
Thread
Metric
921.8M12X1-6g
11 25.0 M15X1-6g
13 29.4 M18X1-6g
15 32.5 M22X1-6g
17 35.7 M25X1-6g
19 38.5 M28X1-6g
21 41.7 M31X1-6g
23 44.9 M34X1-6g
25 48.0 M37X1-6g
All dimensions for reference only.
Inches
Shell
Size
B Thre ad
0.1P-0.3L-TS-2B
(Plated)
Q
Dia.
Max.
9 .6250 .858
11 .7500 .984
13 .8750 1.157
15 1.0000 1.279
17 1.1875 1.405
19 1.2500 1.515
21 1.3750 1.641
23 1.5000 1.767
25 1.6250 1.889
AL06F ( )*
AL06FD ( )*
AL06U ( )*
AL06UD( )*
11
* To complete or der number see page 22.
Amphe-Lite Series
AL07 jam nut receptacle, compos ite
AL07F ( )*
AL07FD ( )*
AL07U ( )*
AL07UD( )*
All dimensions for reference only. •D shaped panel cut-out dimensions
to prevent connector from turning
Millimeters
Shell
Size
A•
+.00
–.25 C
Max.
H He x
+.43
–.41 S
±.25
T•
+.25
–.00
V
Thread
Metric
9 16.99 30.45 22.23 26.97 17.70 M12X1-6g
11 19.53 35.20 25.40 31.75 20.88 M15X1-6g
13 24.26 38.38 30.18 34.93 25.58 M18X1-6g
15 27.53 41.55 33.32 38.10 28.80 M22X1-6g
17 30.68 44.73 36.53 41.28 31.98 M25X1-6g
19 33.86 49.50 39.67 46.02 35.15 M28X1-6g
21 37.06 52.65 42.80 49.23 38.28 M31X1-6g
23 40.01 55.85 46.02 52.37 41.50 M34X1-6g
25 43.41 59.00 50.80 55.58 44.68 M37X1-6g
Inches
Shell
Size
A•
+.000
–.010
B Thre ad
Cl ass 2A
0.1P-0.3L-TS
(Plated) C
Max.
H
Hex
+.017
–.016 S
±.010
T•
+.010
–.000
9 .669 .6250 1.199 .875 1.062 .697
11 .769 .7500 1.386 1.062 1.250 .822
13 .955 .8750 1.511 1.250 1.375 1.007
15 1.084 1.0000 1.636 1.375 1.500 1.134
17 1.208 1.1875 1.761 1.438 1.625 1.259
19 1.333 1.2500 1.949 1.562 1.812 1.384
21 1.459 1.3750 2.073 1.688 1.938 1.507
23 1.575 1.5000 2.199 1.812 2.062 1.634
25 1.709 1.6250 2.323 2.000 2.188 1.759
T•
C
H
S
2 PLACES
P ANEL THICKNESS
.062 MIN .125 MAX
1.57 MIN 3.18 MAX .378 MAX
9.60 MAX
1.280 MAX
32.51 MAX
K REF
SHELL SIZES 9/11 –
.871 22.12
SHELL SIZES 13/25 –
.878 22.30
.091 MAX
2.31 MAX
B THREAD
A•
D
–A–
.794 MAX
20.17 MAX
.940 MAX
23.88 MAX
VIEW D
FOR SIZE 8 TWINAX ONLY,
RELA TIVE TO
VIEW D
FOR SIZE 8 COAXIAL ONLY,
RELA TIVE TO
–A–
–A–
V THREAD
12
B
A.578 MAX
14.68 MAX
B
A
B
A
*10-630912-( )
*10-630907-( )
6.000 APPROX
152.10 APPROX
*10-630908-( )
3.500 APPROX
88.90 APPROX
*10-630909-( )
.578 MAX
14.68 MAX
.578 MAX
14.68 MAX
with nylon braid
with nylon braid
and metal ring attached
D
* To complete order number, add shell size and suffix number.
For example, shell size 11: 10-630912-011.
Amphe-Lite – accessories
receptacle protection c ap
Millimeters
Shell
Size
B
Dia.
Max.
D Dia
+.25
–.00
9 22.23 17.86
11 25.40 21.44
13 28.58 25.81
15 31.75 28.98
17 36.53 32.16
19 38.10 35.33
21 41.28 38.51
23 44.45 41.68
25 47.63 44.86
Inches
Shell
Size
A Thread
Class 2B
0.1P-0.3L-TS
B
Dia.
Max.
D Dia .
+.010
–.000
9 .6250 .875 .703
11 .7500 1.000 .844
13 .8750 1.125 1.016
15 1.0000 1.250 1.141
17 1.1875 1.438 1.266
19 1.2500 1.500 1.391
21 1.3750 1.625 1.516
23 1.5000 1.750 1.641
25 1.6250 1.875 1.766
Finish 10-No
Suffix
Black composite, unpl ated -( )
All dimensions for reference only.
13
* To complete order number, add shell size and suffix number.
For example, shell size 11 with electroless nickel, 10-630910-11F
Amphe-Lite – accessories
plug protection cap
Millimeters
Shell
Size
D
+.25
–.00
N
Dia.
Max.
9 13.11 22.73
11 16.28 25.40
13 19.46 29.74
15 22.63 32.99
17 25.81 36.47
19 28.98 39.19
21 32.16 42.42
23 34.11 45.39
25 38.51 48.62
Inches
Shell
Size
A Thread
Class 2A
0.1P-0.3L-TS
D
+.030
–.000
N
Dia.
Max.
9 .6250 .516 .895
11 .7500 .641 1.000
13 .8750 .766 1.171
15 1.0000 .891 1.299
17 1.1875 1.016 1.436
19 1.2500 1.141 1.543
21 1.3750 1.266 1.670
23 1.5000 1.343 1.787
25 1.6250 1.516 1.914
Finish 10-No
Suffix
Electroless nickel -( )F
Black composite, unpl ated -0( )
N
B
N
B1.166 MAX
29.62 MAX
*10-630910-( )
*10-630911-( )
with nylon braid
with nylon braid
and metal ring attached
D
1.166 MAX
29.62 MAX
All dimensions for reference only.
14
* To complete order number, add shell size and suffix number.
For example, shell size 11 with electroless nickel,10-630913-11F.
Amphe-Lite – accessories
dummy re ceptacle
Finish 10-No
Suffix
Electroless nickel -( )F
Black composite,
unplated -0( )
All dimensions for reference only. Designates true position dimensioning
Millimeters
Shell
Size
M
+.51
–.00 R1R2S
±.25
T
+.20
–.15 W
±.25 AA
Max.
TT
+.20
–.15
9 20.88 18.26 15.09 23.83 3.25 2.49 5.94 5.49
11 20.88 20.62 18.26 26.19 3.25 2.49 5.94 4.93
13 20.88 23.01 20.62 28.58 3.25 2.49 5.94 4.93
15 20.88 24.61 23.01 30.96 3.25 2.49 5.94 4.39
17 20.88 26.97 24.61 33.32 3.25 2.49 5.94 4.93
19 20.88 29.36 26.97 36.53 3.25 2.49 5.94 4.93
21 20.09 31.75 29.36 39.67 3.25 3.18 5.18 4.93
23 20.09 34.93 31.75 42.88 3.91 3.18 5.18 6.15
25 20.09 38.10 34.93 46.02 3.91 3.18 5.18 6.15
Inches
Shell
Size
B Thread
Cl ass 2A
0.1P-0.3L-TS
(Plated)
M
+.020
–.000 R1R2S
±.010
T
+.008
–.006 W
±.010
AA
Max.
Panel
Thickness
TT
+.008
–.006
9 .6250 .822 .719 .594 .938 .128 .098 .234 .216
11 .7500 .822 .812 .719 1.031 .128 .098 .234 .194
13 .8750 .822 .906 .812 1.125 .128 .098 .234 .194
15 1.0000 .822 .969 .906 1.219 .128 .098 .234 .173
17 1.1875 .822 1.062 .969 1.312 .128 .098 .234 .194
19 1.2500 .822 1.156 1.062 1.438 .128 .098 .234 .194
21 1.3750 .791 1.250 1.156 1.562 .128 .125 .204 1.94
23 1.5000 .791 1.375 1.250 1.688 .154 .125 .204 .242
25 1.6250 .791 1.500 1.375 1.812 .154 .125 .204 .242
M
M
.005
.13
T
4 PLACES
TT
4 PLACES
S
2 PLACES
2 PLACES
2 PLACES
R
1
R
2
AA
B
THREAD
M
W
*10-630913-( )
15
FF
L
KK
V THREAD
.270 +.010
–.020
6.86 +.25
–.51
.270 +.010
–.020
6.86 +.25
–.51
V THREAD
KK
FF
LL
U
VIEW AT A
F1
F2
F1
F2
STRAIGHT STYLE
*10-630934-XXX
90 DEGREE ELBOW STYLE
*10-630935-XXX
* To complete order number, add shell size and suffix number.
For example, shell size 11 with electroless nickel, 10-630934-11F.
Amphe-Lite – accessories
cabl e cla m ps
Finish 10-No
Suffix
Electroless nickel -( )F
All dimensions for reference only.
Millimeters
Shell
Size
F1
Min. Dia.
Cable
F2
Max. Dia.
Cable L
Max. U
Max. FF
Dia. Max.
KK
Dia.
Max. LL
Max.
9 2.39 5.16 36.35 16.66 8.81 15.98 25.78
11 3.58 6.35 36.35 17.48 10.01 19.20 26.97
13 4.37 8.20 36.35 19.05 11.86 22.43 28.58
15 5.16 10.72 36.35 21.82 14.38 25.68 33.73
17 5.94 12.70 36.35 23.80 16.36 28.91 35.36
19 6.73 14.27 36.35 25.40 17.93 32.13 36.91
21 7.54 15.88 37.90 26.97 19.53 35.38 40.87
23 8.33 17.86 37.90 28.98 21.51 37.80 42.06
25 9.12 19.43 37.90 30.56 23.09 41.05 43.66
Inches
Shell
Size
F1
Min.
Dia.
Cable
F2
Max.
Dia.
Cable L
Max. U
Max.
FF
Dia.
Max.
KK
Dia.
Max. LL
Max.
9 .094 .203 1.431 .656 .347 .629 1.015
11 .141 .250 1.431 .688 .394 .756 1.062
13 .172 .323 1.431 .750 .467 .883 1.125
15 .203 .422 1.431 .859 .566 1.011 1.328
17 .234 .500 1.431 .937 .644 1.138 1.392
19 .265 .562 1.431 1.000 .706 1.265 1.453
21 .297 .625 1.492 1.062 .769 1.393 1.609
23 .328 .703 1.492 1.141 .847 1.488 1.656
25 .359 .765 1.492 1.203 .909 1.616 1.719
16
Amphe-Lite Series
contacts, sealing plugs, plastic dust caps
Above part numbers include standard 500 cycle finish designation -
gold plating over suitable underplate in accordance with MIL-C-
39029.
For other cont act opt ions available for use in Amphe-Lite connectors,
(thermoc ouple) con sult Sidney, NY.
For protec ti on caps see pages 12 and 13.
STANDARD CONTACTS FOR AMPHE-LITE SERIES
Contact
Size Pin
Part Number Socket
Par t Numbe r
8 (Coax) 21-33102-21 21-33101-21
8 (Twinax) 21-33190-529 21-33191-530
10 (Power) 10-597448- 105 10-59 7449- 105
12 10-597448-125 10-597449-125
16 10-597448-165 10-597449-165
20 10-597448-205 10-597449-205
22D 10-597448-725 10-597449-452
PLASTIC DUST CAPS
Shell
Size Plug Receptacle
9 10-70506-14 10-70500-10
11 10-70506-16 10-70500-12
13 10-70500-18 10-70500-14
15 10-70500-20 10-70500-16
17 10-70500-22 10-70500-19
19 10-70500-24 10-70500-20
21 10-70524-1 10-70500-22
23 10-70506-28 10-70500-24
25 10-70500-28 10-70524-1
SEALING PLUGS
Contact
Size Proprietary
No.
8 (Coax) 10-482099-8
8 (Twinax) T3-4008-59P
10 (Power) 10 -57622 5
12 10-405996-121
16 10-405996-161
20 10-405996-201
22D 10-405996-221
17
Items highlighted are most popular and most readily available.
All dimensions for reference only.
Consult Sidney, NY for specific contact contour stickout data.
NS designates No Stickout.
SOCKETS
PCB
Socket
Contacts Size Tail
Dia
Contact Stickout Max/Min
(See Illu stration below)
AL00 AL06 AL07
10-497623-15 22D .019 .291
.226 .316
.251 .242
.182
10-497623-25 22D .019 .868
.803 .893
.828 .819
.759
10-497623-35 22D .019 .348
.283 .373
.308 .299
.239
10-497623-45 22D .019 .208
.143 .233
.168 .159
.099
10-497623-75 22D .019 .146
.081 .171
.106 .097
.037
10-497623-105 22D .019 .028
NS .053
.000 .021
NS
10-497623-145 22D .019 .609
.539 .634
.564 .560
.495
10-497623-155 22D .019 .423
.358 .448
.383 .374
.314
10-497643-15 20 .019 .348
.294 .373
.319 .299
.250
10-497643-25 20 .019 .213
.159 .238
.184 .164
.115
10-497643-35 20 .019 .555
.501 .580
.526 .506
.457
10-497643-45 20 .019 .138
.084 .163
.109 .089
.040
10-497650-15 16 .040 .255
.201 .280
.226 .206
.157
Wire Wrap
Contacts Tail
Square
10-497577-15 22D .025 .155
.090 .180
.115 .106
.046
10-497577-25 22D .025 .002
NS .027
NS NS
NS
10-497577-35 22D .025 .201
.136 .226
.161 .152
.092
10-497577-55 22D .025 .566
.501 .591
.526 .517
.457
10-497621-15 20 .025 .151
.101 .176
.126 .102
.057
10-497621-25 20 .025 .605
.555 .630
.580 .556
.511
10-497621-35 20 .025 .308
.258 .333
.283 .259
.214
See also catalog 12-170,
Amphenol Cylindrical Connectors for
PCB Applications. This catalog pro-
vides the most commonly used insert
pattern pin-out drawings which have
been too led for the pu rpose of attach-
ing cylindrical connectors to printed cir-
cuit boards.
Amphe-Lite Series
contacts – printed circuit board, wire wrap
PCB socket and pin part nu mbers include finish designation - gold plating
over suitable underplate in accordance with MIL-C-39029. For other finish
variations, consult Sidney, NY.
Note: 22M and 22D contacts are interchangeable.
For other conta ct options available for us e in Amphe -Lite connec tors (ther-
mocouple, fiber optic), consult Sidney, NY.
PINS
PCB
Pin
Contacts Size Tail
Dia
Contact Stickout Max/Min
(See Illu stration below)
AL00 AL06 AL07
10-407552-15 22M .019 .335
.280 .360
.305 .286
.236
10-407552-55 22M .019 .224
.169 .249
.194 .175
.125
10-407552-85 22M .019 .060
.010 .085
.035 .011
NS
10-407552-95 22M .019 NS NS NS
10-407552-115 22M .019 .002
NS .023
NS NS
10-497640-15 20 .019 .348
.298 .373
.323 .299
.254
10-497640-25 20 .019 .213
.163 .238
.188 .164
.119
10-497640-45 20 .019 NS NS NS
10-497640-65 20 .019 .138
.088 .163
.113 .089
.044
10-497596-15 20 .025 .058
.012 .083
.037 .009
NS
10-497596-25 20 .025 .148
.102 .173
.127 .099
.058
10-497596-35 20 .025 .229
.183 .254
.208 .180
.139
10-497596-55 20 .025 .346
.300 .371
.325 .297
.256
10-497695-15 16 .040 .255
.205 .280
.230 .206
.161
10-497630-25 16 .062 .348
.298 .373
.323 .299
.254
10-497630-35 16 .062 .060
.010 .085
.035 .011
NS
10-497630-45 16 .062 .108
.062 .133
.087 .059
.018
10-597502-15 12 .081 .228
.178 .252
.203 .179
.134
Wire Wrap
Contacts Tail
Square
10-407572-15 22D .025 .014
NS .498
.007 NS
NS
10-407572-35 22D .025 .155
.105 .180
.130 .106
.061
10-407572-45 22D .025 .255
.205 .280
.230 .206
.161
10-407572-75 22D .025 .521
.475 .546
.500 .472
.431
10-407584-25 20 .025 .605
.559 .630
.584 .556
.515
10-407584-35 20 .025 .308
.262 .333
.287 .259
.218
CONTACT
STICK OUT
18
.267
±.003
SHRINK
TUBE STRENGTH
MEMBER .102 ±.001
DIA CERAMIC
FERRULE
.162
±.004
A DIA
REF
.06240 DIA
+.00002
–.00002 ALIGNMENT
SLEEVE**
1.093 ±.020
.080 MAX
CABLE DIA
.040 MAX
BUFFER
CABLE DIA
1.500 MAX*
1.176 MAX*
CERAMIC FERRULE
A DIA
REF
.102 ±.001
DIA
.0625 +.0000
–.0002 DIA .297 +.003
–.002 STRENGTH
MEMBER SHRINK TUBE .040 MAX
BUFFER
CABLE DIA
.080 MAX
CABLE DIA
Amphenol® Multi-mode, Size 16 Termini
Features and Perform ance Levels:
• Ceramic alignment ferrule which precisely positions the fiber
within the termini
• Phosphor bronze alignment sleeve, assembled on the socket
after polishing insures accurate fiber to fiber alignment (a
ceramic al ignment sl eeve is also avail able) .
• Typical insertion loss for 100/140 fiber with .2 NA at 820 nm
is .5 to .7 dB using Air Gap (AG) poli sh techni que
Use of the ceramic ferrule and sleeve maximizes the ability to
hold extremely tight dimensional tolerances while maintaining
accurate concentricity, thus providing superior and consistent
optical loss performance.
• Termination accomplished using the industry proven epoxy/
polish method. Can be polished Air Gap (AG) or Physical con-
tac t (P C ).
• Socket cleaning optional. Consult Amphenol, Sidney, NY for
termini cleaning tool. For appl icat ion tools consul t Si dney, NY. Multi-mode Size 16 Fiber Optic Termini
Amphe-Lite Series
fiber o ptic termini – mu lti-mode, size 16
Size 16 Multi-mode
Pin Terminus
Size 16 Multi-mode
Socket Terminus
* Indicated dimension when fully assem-
bled.
Amphenol® Multi-Channel fiber optic connectors are supplied l ess contacts. Order multi-mode
termini by Am phenol part number designation as shown in the chart below. Consult Amphe-
nol, Sidney, NY for further ava il abilit y.
† Additional sizes available upon request: consult Amphenol, Sidney, NY
for availability.
Power contacts can be purchased separately, contact Amphenol, Sidney, NY.
Ordering Informa ti on
Multi-mode Termini (Si ze 16) for Amphe-Lite Connectors
Fiber Siz e†
Cor e/C laddin g Dia (Microns) Size 16 Socke t Size 16 Pin A Dia Ref
Inches Microns
50/125 CF-198035-010 CF-198036-010 .0050 127
62.5/125
100/140 CF-198035-017 CF-198036-017 .0057 145
100/140/172 CF-198035-029 CF-198036-029 .0069 175
100/140/172 CF-198035-29A CF-198036-29A .0068 173.5
200/230 CF-198035-053 CF-198036-053 .0093 236
200/240 CF-198035-057 CF-198036-057 .0097 245
200/280 CF-198035-074 CF-198036-074 .0114 290
200/300 CF-198035-080 CF-198036-080 .0120 305
STAINLESS
STEEL BODY
SPRING
SOCKET
PHOSPHOR BRONZE
ALIGNMENT SLEEVE
CERAMIC
FERRULE
STAINLESS STEEL
BODY
PIN
CERAMIC FERRULE
19
.263 ±.004
.03937 +.00012
–.00000 DIA ALIGNMENT
SLEEVE**
A DIA
REF
CERAMIC
FERRULE
.162 ±.002
1.500 MAX*
.069 ±.001
DIA
1.093 ±.020
STRENGTH
MEMBER
SHRINK TUBE
.037 MAX BUFFER
CABLE DIA
.063 MAX
CABLE DIA
.123 MIN
+.00012
.03937 –.00000 DIA
.069 ±.001
DIA A DIA
REF
CERAMIC
FERRULE
1.176 MAX*
SHRINK TUBE .037 MAX BUFFER
CABLE DIA
.063 MAX
CABLE DIA
STRENGTH
MEMBER
.297 +.003
–.002
Amphenol® Multi-mode, Size 20 Termini
Features and Perform ance Levels:
• Designed for use i n size 20 cavities of Amphe-Lite connect ors
• Designed with similar high performance components as the
proven size 16 termini
• Comparable performance and reliability to the size 16 termini
can be expected
• Offers increa sed ter m ini densit y in Amphenol Am phe-Lite con-
nectors
• Maintai ns fi ber opti c/el ectrical hybr id capabilities
• Allow s fo r multiple fiber accom moda tions
• Termination accomplished using the industry proven epoxy/
poli sh m ethod. Can be p oli shed Air Gap (AG) or Physical con-
tac t (P C ).
• Socket cleaning optional. Consult Amphenol, Sidney, NY for
termini cleani ng tool . For applic ati on tool s consult Sidney, NY.
Amphe-Lite Series
fiber o ptic termini – mu lti-mode, size 20
Amphenol® Multi-Channel fiber optic connectors are supplied less contacts. Order
multi-mode termini by Amphenol part number designation as shown in the chart
below. Consult Amphe nol, Sidney, NY for further avai labili ty.
† Additional sizes available upon request: consult Sidney, NY for availability.
Power contacts can be purchased separately, contact Sidney, NY.
Ordering Informa ti on
Multi-mode Termini (Si ze 20) for Amphe-Lite Connectors
Fiber Siz e†
Cor e/C laddin g Dia (Microns) Size 20 Socke t Size 20 Pin A Dia Ref
Inches Microns
50/125 CF-198080-010 CF-198081-010 0.0050 127
62.5/125
100/140 CF-198080-017 CF-198081-017 0.0057 145
Multi-mode Size 20 Fiber Optic Termini
* Indicated dimension when fully assem-
bled.
Size 20 Multi-mode
Pin Terminus
Size 20 Multi-mode
Socket Terminus
CERAMIC FERRULE
PHOSPHOR BRONZE
ALIGNMENT SLEEVE
SPRING
STAINLESS
STEEL BODY
SOCKET
PIN
CERAMIC
FERRULE
STAINLESS STEEL
BODY
20
DIA.
.297 +.003
–.002
.102 ±.001
A DIA.
REF. CERAMIC
FERRULE
C REF
SHRINK
TUBE
.500 RADIUS
B MAX
.128 +.002
–.001
DIA..0625 +.0000
–.0002
.675 MAX.
1.093 ±.020
.500 RADIUS
REF.
.557 ±.008
.537 REF.
1.145 MAX.
.128
DIA. +.002
–.001
.102 ±.001 DIA.
SHRINK TUBING***
1.100
REF.
1.820 MAX.**
A DIA. REF.
.06240 ±.00002
.162
±.004 CERAMIC
FERRULE
ALIGNMENT
SLEEVE***
.267+.003
–.002
Amphenol provides 90°, size 16 fiber optic termini that can be used with multi-channel cylindrical connectors.
90° Socket Termini (Size 16)
90° Pin Termini (Size 16)
Ordering Information for 90° Multi-mode Socket Termini
Fiber Size†
Core/Cladding
Dia (Microns)
Socket, Size 16
Am phenol P art Num ber
For use in Cylindrical
Connectors
A Dia Ref
Inches Microns
50/125 CF-198111-010 .0050 127
62.5/125
100/140 CF-198111-017 .0057 145
100/140/172 CF-198111-29 OR .0069 175
CF-198111-29A .0068 173.5
† Additional sizes available upon request: consult
Amphenol, Sidney, NY for availability.
* Consult Amphenol, Sidney, NY for ordering
information.
** Indicated dimension when fully
assembled.
*** Shrink tubing and alignment sleeve
are shipped unassembled.
† Additional sizes available upon request: consult Amphenol,
Sidney, NY for availability.
* Consult Amphenol, Sidney, NY for ordering information.
Ordering Information for 90° Multi-mode Pin Ter mini
Fiber Size†
Core/Cladding
Di a (M i crons )
Pin, Size 16
Am phenol P art Number
For use in Cylindrical
Connectors
A Dia Ref B Max
(Inches) C Ref
(Inches)
Inches Microns
50/125 CF-198110-010 .0050 127 1.121 1.100
62.5/125
100/140 CF-198110-017 .0057 145 1.121 1.100
100/140/172 CF-198110-029 OR .0069 175 1.121 1.100
CF-198110-29A .0068 173.5 1.121 1.100
50/125 CF-198112-010 .0050 127 1.003 .900
62.5/125
100/140 CF-198112-017 .0057 145 1.003 .900
100/140/172 CF-198112-029 OR .0069 175 1.003 .900
CF-198112-29A .0068 173.5 1.003 .900
Amphe-Lite Series
fiber o ptic termini – 90 ° multi-mode , size 16
21
Amphe-Lite Series
application tools
Contact
Size/Type Crimping
Tool Turret Die
or Posi tioner
12 Pin and Sock et M22520/1-01 M225 20/1-04
16 Pin and Sock et M22520/1-01
M22520/7-01 M22520/1-04
M22520/7-04
20 Pin and Sock et M22520/1-01
M22520/2-01
M22520/7-01
M22520/1-04
M22520/2-10
M22520/7-08
22D P in M22520/2-01
M22520/7-01 M22520/2-09
M22520/7-07
22D S ocket M22520/2-01
M22520/7-01 M22520/2-07
M22520/7-05
8 Twinax Center
Pin and Sock et M22520/2-01 M22520/2-37
8 Twinax Intermediate
Outer Pin & Socket M22520/5-01 M22520/5-200
The fol lowi ng data includes informati on pertaining to the application to ols whi ch have been estab-
lished for crimping, inserting, and removing contacts incorporated in the Amphe-Lite Series con-
nectors. For additional inf ormation on coax ial contact tools see catalog 12-130.
All crimping tools included are the “full cycling” type.
There is a possibility of additional crimping tools other than those included being available at
present or in the future for this specific applicati on.
RECOMMENDED CRIMPING TOOLS
Contact
Size/Type Crimping
Tool Turret Die
or Posi tioner
8 Coaxial Inner
Pin and Sock et M22520/2-01 M22520/2-31
8 Coaxial Outer Pin
and Socket
M22520/5-01 M22520/5-05
Die C l osure B
M22520/5-01 M22520/5-41
Die C l osure B
M22520/10-01 M22520/10-07
Die C l osure B
16 Coaxial Inner
Pin and Sock et M22520/2-01 M22520/2-35
16 Coaxial Outer
Pin and Sock et M22520/4-01 M22520/4-02
12 Coaxial Inner
Pin and Sock et M22520/2-01 M22520/2-34
12 Coaxial Outer
Pin and Sock et M22520/31-01 M22520/31-02
10 (Power) TP201423 1716P-1
Where 2 or 3 tools are listed for a contact s ize, only one tool and its die or positioner are
required to crimp the contact.
The above crimping tools and pos itioners are available from the approved tool manuf acturer.
INS ERTION TOOLS
Use with
Contact
Size
Plastic Tools Metal Tools
MS
Part Number Color
Angle Type Straig ht Type
Proprietary
Part Number C olor
MS
Part Number Proprietary
Part Number
10 (Power) M81969/14-0 5* Gray / (White) M8 1969/8-11 † † Green
12 M81969/14-04* Yellow / (White) M81969/8-09 11-8674-12 11-8794-12 Yellow
16 M81969/14-0 3* Blue / (White) M8196 9/8-07 11-8674-1 6 11-8 794-1 6 Blue
20 M81969/14-1 0* Re d / (Orange) M 8196 9/8-05 11-8 674-2 0 11-8 794-2 0 Red
22D M81969/ 14-0 1* Green / (White ) M8 1969/8-01 11-8674 -24 1 1-879 4-24 Bl ack
8 Coaxi al None Requ i red
8 Twinax N one M81969/46-06** None R ed
REMOVA L TOOLS
Use with
Contact
Size
Plastic Tools Metal Tools
MS
Part Number Color
For Unwired
Contacts
Proprietary
Pa rt Numb er
Angle Type Straight Type
Proprietary
Part Number Color
MS
Pa rt Numb er Proprietary
Pa rt Numb er
10 (Power) M81 969/14-05* (Gra y) / White † M81969/8-12 † † Green / Whi te
12 M81 969/14-04* (Yell ow) / Whi te 1 1-1005 0-11 M81969/8-10 11-8675-12 11-8795- 12 Yellow / Whi t e
16 M81969/14-03* (Blue) / White 11-10050-10 M81969/8-08 11-8675-16 11-8795-16 Blue / White
20 M81969/14-10* (O range )/ Red 11-10050- 9 M81969/8-06 11- 8675- 20 11-87 95-20 Red / White
22D M81969/14-01* ( Green) / Wh i te 11-1 0050- 7 M81969/8-02 11- 8675- 24 11-87 95-24 Gree n / W hi te
8 Coaxi al M81969/14-12 Green None None 11-917 0 DRK264- 8†† N/A
8 Twinax M81969 /1 4-12 Green None M819 69/ 46-1 2* * 11-917 0 N/ A N/A
The M81969/8, 11-8674, 11-8675,and 11-8794 metal contact insertion and removal tools will accommodate wires having the maximum outside diameter as fol-
lows: Contact siz e 12–.155, 16–.109, 20–.077, 22D–.050. When wire diameters exceed those specified, the plastic tools must be used.
* Double end insert ion/removal tool.
** Twinax insert ion tools are available only in a straight type, metal version. † To be determined.
†† Contact Daniels Manufacturing Co. for availability.
22
Amphenol® Amphe-Lite Compos it e Connectors can be ordered by coded part number.
Ordering procedur e is illustrated by part num ber AL00F9-35PB as shown below:
AL 00 F 9 - 35 P B ( )
Connector Type
Shell Style
Service Class
Shell Size
Insert Arrangement
Contact Type
Alternate Positions
Specials
Amphe-Lite Series
how to order
Connector Type
AL . . . desi gnates Amphe-Lite Connector Series
Shell Style
00 . . . designates wal l mount rece ptacle
06 . . . designates straight plu g
07 . . . designates ja m nut receptacle
Service Class
F . . . . elec trol ess nickel plate d com posite shells, wit h fl uori nated silicone rubber components for incr eased
fluid resistance
FD . . . electroless ni ckel pl ati ng com posite shell s, with dimethyl silicone rubber components
U . . . . black composite, unplated, with fluorinated silicone rubber com ponents fo r incre ased fluid resi stance
UD. . . black composite, unplated, with dimethyl silicone rubber components
Shell Size
9 thru 25 available
Insert Arrangement
See insert arrangement chart, page 3. See insert configurat ions illust rated on pages 5-8.
Contact Type
P . . . . desi gnates standar d 500 cycle pin contacts
S . . . . desi gnates standar d 500 cycle soc ket cont acts
C . . . . designat es pin PC tail cont acts lo aded in connec tor (se e page 17).
D . . . . designat es socket PC tail contacts loa ded in connect or (see page 17).
Alternate Positions
Locksm it h keying - rotati on of minor key s. “N” not required for normal posi ti on, see page 4.
Specials
NMG . designates non-magnetic connectors.
See page 24 for descr iption of the new non-magnetic product off eri ng of 100% non-magnetic st yle Amphe-lit e
connect ors. Other specials include optional contact styles and contact platings. Also includes a high decou-
pli ng styl e of Amphe-Lite. Consul t Amphenol, Sidney, NY for par t numberi ng suffix for specials.
Standard Packagi ng
The Amphe-Lite Series is shipped with connectors and contacts packaged in bulk. Consult Amphenol Indus-
tri al, Sidney NY for special packagi ng requirem ents
RoHS COMPLIANT PRODUCT
AVAILABLE - Consult Amphenol In dustrial Operations.
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
23
Amphe-Lite – capabilities
fiber optics, coax contacts, flex termination,
PC tails
FIBER OPTIC
Fiber optic termini connectors offer a precision optic interconnect system within the
Amphe-Lite connector. The Amphe-Lite connector provides protection from damage
in severe environmental and physical conditions. Optical performance is optimized
utilizi ng the ceramic alignment features employed by the termini. Insertion losses are
typically .8dB and can range from .5 to 1.5 dB, depending on test conditions.
See pages 18-20 for fi be r opt ic termini fea tures and ho w t o order . Ask for publi ca t ion
12-352 or contact Sidney, NY for more information on Amphenol Fiber Optic Con-
nectors.
Also available with MT and LC termination within an Amphe-Lite shell kit. Contact
Amphenol, Sidney for m ore information.
CONNECTORS WITH COAX CONTACTS
For shielded wire applications, coaxial contacts can be incorporated into Amphe-Lite
connectors. Designed-in crimp or solder types are available to fit various RG and
special cables. High performance coaxial contacts eliminate discontinuities or
impedance variations due to movement of parts under axial load.
For further information on coax contacts ask for catalog 12-130
FILTER CONNECTORS FOR EMI PROTECTION
EMI shielding protection can be integrated into the Amphe-Lite connector with a pla-
nar array filter device. This provides a cost effective alternative to discrete devices
mounted inside the box, and provides the weight and space savings necessary for
modern electronic systems.
Amphenol’s industrial connectors with filter protection are called the Amphe-dB
Series; a family of popular industrial cylindricals that are enhanced to provide EMI
protection. The Amphe-dB Series family includes the Amphe-Lite filter with a planar
filter device and also MIL-5015 and MIL-C-26482 connectors which incorporate chip
capacitor board filter devices.
FLEX TERMINATION ASSEMBLIES FOR PRI NTED CIRCUI T BOARD
APPLICATIONS
Amphenol provides flex termination assemblies for printed circuit board attachment.
Flex circuits are available for Amphe-Lite connectors in flat or sculptured styles.
Sculptured® Flexible Circuits with built-in terminations elim inate the failures associ-
ated with crimped or solder-on contacts, and they are designed to geometrically fit
the tight space requirements within a unit. They plug into a printed circuit board and
create a self-locking terminal pad which eliminates the need for an additional inter-
connect to the PCB.
Consult Amphenol Industrial Operations for information on Amphe-Lite connectors
with flex circuits.
PC TAIL CONTACTS IN AMPHE-LI TE
CONNECTORS
Another Amphe-Lite option allowing for greater
flexibility, is the jam nut with the stand-off
adapter. This combination provides a means to
fa sten a PCB or rig i d fl e x to t he r ear o f a jam nut
shell. Shell style designator is a 0P. An example
part number is AL0PF17-35P. Consult Amphe-
nol Industrial Operations for further information.
Fiber Optics and Coax Contacts
Amphe-dB - Amphe-Lite Connector with
Planar Array Filter
Flex Term in ation A ssemblies
Amphe -Li t e Jam Nut Con nec t or w ith
Stand-off Adapter and PC Tails See catalogs online at
www.amphenol-industrial.com
24
NON-MAGNETIC AMPHE-LITE CONNECTORS
A new product offering from Amphenol is the non-magnetic Amphe-Lite style
which is made of a durable corrosion resistant composite material for harsh envi-
ronments.The same triple start thread used on standard Amphe-Lite connectors
allows for complete mating in a single turn of the coupling nut. IP67 sealing grom-
mets and interfacial seals are standard. It is an ideal solution for MRI equipment in
the medical market, and in other test equipment where a 100% non-magnetic
multi-conductor connector is required.
With up to 128 size 22D contacts in one connector, the Amphenol non-magnetic
Amphe-Lite is one of the few 100% non-magnetic connectors available today. It is
available in a straight plug and three receptacle shell styles: wall mount, in-line
and jam nut. Non-magnetic styles are available with many of the standard Amphe-
Lite inserts. A wide variety of contact styles can be incorporated, and it can also
be assembled with Amphenol ACT flex circuits.
GROUND PLANE CONNECTORS
Amphenol offers Amphe-Lite connectors for data bus, LAN and coax/triax/twinax transmission lines
with conductive inserts that ground the outer conductor of the coax, triax or twinax contact to the
shell. These connectors are sold “less contacts”. They will accommodate size 8 coax, triax or twinax
contacts or size 12 and 16 coax contacts.
The insert availability chart on page 3 indicates the patterns that are available in a ground plane
version, (see those designated with a star symbol), and consult Amphenol, Sidney NY for ordering
procedures.
CONNECTORS WITH CONCENTRIC TWINAX CONTACTS
The size 8 concentric twinax contact was developed for use in MIL-
STD-1553 Airborne multiplex data bus applications which require
high performance interconnect characteristics in multi-pin connec-
tors. The Amphe-Lite Series with concentric twinax contacts are ideal
for communication data bus applications. The concentric twinax con-
tact is crimp terminable to twisted-shielded cable.
For further information on concentric twinax contacts ask for Amphe-
nol Catalog 12-130.
CONNECTORS WITH REDUCED COMPONENT TWINAX
(RCT) CONTACTS
The RCT (Reduced Component Twinax) contact meets MIL-C-
39029/90 and /91 requirements for intermateability and performance
while reducing the number of user-assembled components from
seven to three. The inner conductors and outer barrel of the RCT are
each terminated to the cable by a crimp joint, so no costly assembly
soldering operations are required. Features include:
• Three user assembled components
• Available in size 8 and size 10 contacts
• MIL-C-17/176-00002 cable termination
• For installation in Amphe-Lite connectors
• Termination completed in only two crimping operations
• Inner conductors stripped to common length, eliminating
multiple measurements
For further information on RCT contacts ask for Amphenol Catalog
12-130.
Amphe-Lite Series – capabilities
non-magnetic connectors, ground plane
connectors, twinax contacts, power contacts
Non-Magnetic Amphe-Lite Connector with
Power Contacts, Fiber Optics and Flex Circuitry
Ground Plane Connector with
Metallic Insert and
Concentric Twinax Contacts
Concentric Twinax Contacts Qualified to M39029/90 and /91
RCT (Reduced Component Twinax) Contact
Cable Crimp Intermediate Outer Pin
Ferrule & Inner Assembly Assembly
CONNECTORS WITH POWER CONTACTS
Size 10 power, size 12 and size 16 contacts are available in
many standard insert arrangements. These contacts provide a
wide range of power transmission capabilities. Standard con-
tacts are gold plated to maintain a superior conductive surface.
For further information on insert patterns that contain power
contacts refer to the insert availability chart on page 3.
See catalogs online at
www.amphenol-industrial.com
