SPECIFICATION CONTROL DRAWING
Tyco Electronics Corporation
300 Constitution Drive,
Menlo Park, CA. 94025, U.S.A.
Raychem
TITLE:
SOLDERSLEEVE SHIELD TERMINATOR,
IMMERSION RESISTANT,
175°C, LEAD-FREE
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
DOCUMENT NO.:
SO175-X-00
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for their
application.
PROD. REV.:
SEE TABLE
DOC. ISSUE:
1
DATE:
25-Apr-03
DRAWN BY:
M. FORONDA
CAGE CODE:
06090
REPLACES:
D020140
DCR NUMBER:
D030220
SCALE:
None
SIZE:
A
SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
© 2004 Tyco Electronics Corporation. All rights reserved
Product Revision Product Dimensions Cable Dimensions
Product
Name
Ident
Code L±1.75
(L±0.075)
øA
min
øB
min
øD
max
øE
max
øF
min
øG
min
SO175-1-00 A SO1751R
16.50
(0.650)
1.90
(0.075)
2.67
(0.105)
1.90
(0.075)
2.67
(0.105)
0.90
(0.035)
0.50
(0.020)
SO175-2-00 A SO1752R
16.50
(0.650)
2.67
(0.105)
3.68
(0.145)
2.67
(0.105)
3.68
(0.145)
1.40
(0.055)
0.75
(0.030)
SO175-3-00 A SO1753R
16.50
(0.650)
4.32
(0.170)
5.08
(0.200)
4.32
(0.170)
5.08
(0.200)
2.15
(0.085)
1.25
(0.050)
SO175-4-00 A SO1754R
19.10
(0.750)
5.97
(0.235)
6.48
(0.255)
5.97
(0.235)
6.48
(0.255)
3.30
(0.130)
1.80
(0.070)
SO175-5-00 A SO1755R
19.10
(0.750)
6.98
(0.275)
7.62
(0.300)
6.98
(0.275)
7.62
(0.300)
4.30
(0.170)
2.50
(0.100)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR:
SOLDER: TYPE Sn96 per ANSI/J-STD-006.
FLUX: TYPE ROM1 per ANSI/J-STD-004.
THERMAL INDICATOR: Fusible ring, melt point: 232°C, completely melted at 240°C.
MELTABLE RINGS: Environment resistant thermoplastic. Color: blue.
APPLICATION
1. These parts are designed to provide an environment resistant shield termination on cables, rated for 150°C minimum,
meeting the dimensional criteria listed, having nickel-plated shields and insulations compatible with the insert material.
For compatible insulations, see MIL-S-83519/1 or consult Tyco Electronics/Raychem.
2. When installed per Tyco Electronics/Raychem process standard RCPS-100-70, assemblies will meet performance requirement of
Tyco Electronics/Raychem Specification RT-1404, MIL-S-83519, and 514.1920/99 Aerospatiale Matra Specification.
3. Temperature range: -55°C to +175°C.
For best results, prepare the cable as shown:
“G” is the minimum diameter on which the sleeve will seal.
SolderSleeve is a trademark of Tyco Electronics Corporation
