© 2000 IXYS All rights reserved 1 - 3
Symbol Test Conditions Characteristic Values
IRTVJ = TVJM; VR = VRRM 15 mA
VFIF = 300 A; TVJ = 25°C 1.43 V
VT0 For power-loss calculations only 0.75 V
rTTVJ = TVJM 1.95 mW
QSTVJ = 125°C; IF = 50 A, -di/dt = 6 A/ms 170 mC
IRM 45 A
RthJC per diode; DC current 0.26 K/W
per module other values 0.13 K/W
RthJK per diode; DC current see Fig. 6/7 0.46 K/W
per module 0.23 K/W
dSCreepage distance on surface 12.7 mm
dAStrike distance through air 9.6 mm
aMaximum allowable acceleration 50 m/s2
Data according to IEC 60747 and refer to a single diode unless otherwise stated.
IXYS reserves the right to change limits, test conditions and dimensions
IFRMS = 2x 180 A
IFAVM = 2x 120 A
VRRM = 800-2200 V
VRSM VRRM Type
VV
900 800 MDD 95-08N1 B
1300 1200 MDD 95-12N1 B
1500 1400 MDD 95-14N1 B
1700 1600 MDD 95-16N1 B
1900 1800 MDD 95-18N1 B
2100 2000 MDD 95-20N1 B
2300 2200 MDD 95-22N1 B
Symbol Test Conditions Maximum Ratings
IFRMS TVJ = TVJM 180 A
IFAVM TC = 105°C; 180° sine 120 A
IFSM TVJ = 45°C; t = 10 ms (50 Hz), sine 2800 A
VR = 0 t = 8.3 ms (60 Hz), sine 3300 A
TVJ = TVJM t = 10 ms (50 Hz), sine 2500 A
VR = 0 t = 8.3 ms (60 Hz), sine 2750 A
òi2dt TVJ = 45°C t = 10 ms (50 Hz), sine 39 200 A2s
VR = 0 t = 8.3 ms (60 Hz), sine 45 000 A2s
TVJ = TVJM t = 10 ms (50 Hz), sine 31 200 A2s
VR = 0 t = 8.3 ms (60 Hz), sine 31 300 A2s
TVJ -40...+150 °C
TVJM 150 °C
Tstg -40...+125 °C
VISOL 50/60 Hz, RMS t = 1 min 3000 V~
IISOL £ 1 mA t = 1 s 3600 V~
MdMounting torque (M5) 2.5-4/22-35 Nm/lb.in.
Terminal connection torque (M5) 2.5-4/22-35 Nm/lb.in.
Weight Typical including screws 90 g
Features
●International standard package
JEDEC TO-240 AA
●Direct copper bonded Al2O3 -ceramic
base plate
●Planar passivated chips
●Isolation voltage 3600 V~
●UL registered, E 72873
Applications
●Supplies for DC power equipment
●DC supply for PWM inverter
●Field supply for DC motors
●Battery DC power supplies
Advantages
●Space and weight savings
●Simple mounting
●Improved temperature and power
cycling
●Reduced protection circuits
Dimensions in mm (1 mm = 0.0394")
MDD 95
312
TO-240 AA
123
Diode Modules
http://store.iiic.cc/
© 2000 IXYS All rights reserved 2 - 3
MDD 95
Fig. 1 Surge overload current
IFSM: Crest value, t: duration Fig. 2 òi2dt versus time (1-10 ms) Fig. 2a Maximum forward current
at case temperature
Fig. 3 Power dissipation versus
forward current and ambient
temperature (per diode)
Fig. 4 Single phase rectifier bridge:
Power dissipation versus direct
output current and ambient
temperature
R = resistive load
L = inductive load
http://store.iiic.cc/
© 2000 IXYS All rights reserved 3 - 3
Fig. 5 Three phase rectifier bridge:
Power dissipation versus direct
output current and ambient
temperature
Fig. 6 Transient thermal impedance
junction to case (per diode)
Fig. 7 Transient thermal impedance
junction to heatsink (per diode)
RthJK for various conduction angles d:
d RthJK (K/W)
DC 0.46
180°0.48
120°0.50
60°0.54
30°0.58
Constants for ZthJK calculation:
iR
thi (K/W) ti (s)
1 0.013 0.0012
2 0.072 0.047
3 0.175 0.394
4 0.2 1.32
MDD 95
RthJC for various conduction angles d:
d RthJC (K/W)
DC 0.26
180°0.28
120°0.30
60°0.34
30°0.38
Constants for ZthJC calculation:
iR
thi (K/W) ti (s)
1 0.013 0.0012
2 0.072 0.047
3 0.175 0.394
http://store.iiic.cc/
