Polygon Mirror Scanner Motor Polygon Mirror Scanner Motor INTRODUCTION This polygon mirror scanner motor is designed to rotate at a constant designated speed. Polygon mirror scanner motor is core component in laser beam printer is applied OA appliance. And this motor is used to deflect Laser beam of the polygon mirror. It is need to spin at high speed to increase quantity of the print page. It is need to control by an accurate velocity because of the stability of the print quality. FEATURE AND APPLICATION Feature - Drive Circuit Inside - Wide line-up from low speed to high speed - Low Mechanical Noise & Vibration By Dynamic Bearing - Low Jitter Dynamic Bearing - External Clock Drive Method Application - Laser Printer - Digital PPC - Laser PPF - Bar code scanner, etc. -1- Polygon Mirror Scanner Motor STRUCTURE -2- Polygon Mirror Scanner Motor APPEARANCE AND DIMENSION H A D L B T All standards will be able to confront in demand of the customer under discussing OPTICAL HEIGHT (H) MIRROR SIZE FACET x I.C.D(L) x T(T) BOSS (D) DMPSGC11A 13.5 F6 x 36.0 x T3.0 20.0 DMPSGC14D 12.0 F6 x 34.64 x T2.0 9.0 DMPSGC14E 12.0 F6 x 34.64 x T2.0 9.0 DMPSGC14H 11.5 F6 x 34.64 x T2.0 9.0 DMPSGC14G 11.5 F6 x 34.64 x T2.0 9.0 13.5 F6 x 34.64 x T2.0 9.0 11.0 F7 x 32.0 x T2.0 9.0 DMPSGC34A 11.0 F6 x 34.64 x T2.0 9.0 DMPSGC47A 11.0 F6 x 34.64 x T2.0 9.0 DMPSGC54A 11.0 F7 x 32.0 x T2.0 9.0 DMPSGC59A 11.0 F7 x 40.0 x T2.0 9.0 DMPSGC62A 11.5 F6 x 34.64 x T2.0 9.0 10.7 F12 x 25 x T5.0 - MODEL DMPSGC26A DMPSGC27A DMPSGC30A PCB SIZE (A x B) 48 x 68 56 x 115 -3- Polygon Mirror Scanner Motor PART NUMBERING DM 1 P 2 S 3 G 4 C 5 1 Abbreviation of SAMSUNG DC 2 Application 3 Function of DC Motor 4 Structure of DC Motor 5 Type 6 Serial Number of Development 7 Minor-change 11 6 A 7 Motor Order 1 Abbreviation of SAMSUNG DC Motor 2 Application Symbol Application P LASER PRINTER 3 Function of DC Motor Symbol Function of DC Motor S SPINDLE SCANNER 4 Structure of DC Motor Symbol Structure of DC Motor G GENERAL Symbol Type C CORE Type 5 Type -4- Polygon Mirror Scanner Motor 6 Serial Number of Development Order Give a number from 00 to 99 in order of development. 7 Minor-Change Give a character from A to Z in order of Minor-Change. -5- Polygon Mirror Scanner Motor PACKAGING EPS TRAY EPS TRAY (MOTOR 20pcs) 1 2 3 4 5 NO ITEM MATERIAL & SPEC Q'TY / PALLET 1 CAP POLYPROPYLENE, 69x50.5x23 1,800 2 MOTOR 68x48x19.6 1,800 3 SILICAGEL 3g 180 4 VINYL VINYL, 100x80xT0.04 1,800 5 EPS TRAY EPS#30, 514x338x50 108 -6- Polygon Mirror Scanner Motor OUTER CARTON BOX OUTER CARTON BOX (1 EMPTY TRAY, 5 TRAY WITH MOTORS) EMPTY TRAY 5 5 TRAY MOTOR 100 PCS SILICAGEL 10 PCS (2PCS/TRAY) 5 6 SIDE MARKING 7 MODEL ********* Q'TY 100 EA USER ********* PART NO LOT NO ABCDEF 6 A BC DE F MOTOR Rev.(A : THE FIRST SPEC) DAY MONTH THE END NUMBER OF YEAR NO ITEM 6 OUTER BOX 7 TAPE MATERIAL & SPEC CORRUGATED BOARD(A=A) 518x342x248 (INSIDE DIMENSION) POLYPROPYLENE, W50 Q'TY / PALLET 18 18 -7- Polygon Mirror Scanner Motor PALLET PALLET (18 CARTON BOX, MOTOR : 1,800 pcs) 6 8 9 6 9 8 NO ITEM MATERIAL & SPEC Q'TY / PALLET 8 PALLET WOOD, 1,100x1,100x120 1 9 LDP LOW DENSITY POYESTER W500, T0.025 LAPPED IT AROUND EACH FACES 1 -8- Polygon Mirror Scanner Motor RELIABILITY TEST DATA 25[]*65[%RH] However, the conditions mentioned blow can be applied for testing as far as no technical problem Temperature : 10~35[], Relative humidity : 45~80[%RH] Item 1 Starting current Measured at 24[V] Measured at rated voltage and rated load 1.0 [A] or less 2 Rated current Measured at rated voltage and rated load Measured in about 10[s] after motor starts 0.60 [A] or less 3 4 5 6 7 Measurement Conditions Specifications (Example) No Time after the motor start and before the lock signal is output in the rated voltage, rated load. 3.5 [s] or less Time after the motor start and before the satisfaction of specifications in the rated voltage, rated load. 5.0 [s] or less Start time LF (at 600 facet) Measured using a standard circuit and jig. 0.020 [%] or less RF (at 6 facet) Measured using a standard circuit and jig. 0.010 [%] or less Jitter Dynamic balance Pyramid error of the mirror at operation Noise Measured using a balancer Mirror side 1[*]or less Measured using a balancer Rotor case side 1[*]or less Measured using a balancer Static 2[*] or less Total Measured by rotating the motor at the rated speed of rotation 150[]p-p or less Adjacent Measured by rotating the motor at the rated speed of rotation 100[]p-p or less Measured 1[m] from the side of the motor 60 [dB-A] or less -9- Polygon Mirror Scanner Motor No Item 1 Operating Environmental Conditions No condensation 0~60[] 10~85[%RH] 2 Storage Environmental Conditions No condensation -40~70[] 10~90[%RH] 3 4 Withstand Vibration test Withstand Shock test Measurement Conditions 1.96[] acceleration and 5~60~5[Hz], Period 15[min] Vibration for 30[min], each up-down, left-right, back-front, at operating 24.5[] acceleration and 5~60~5[Hz], Period 15[min] Vibration for 30[min], each up-down, left-right, back-front, at non operating 980[] acceleration and 11[ms] half sine wave shock for once each up-down,left-right,back-front, at operating 40[] 90[%RH] for 120[h] -40[] for 120[h] 70[] for 120[h] No condensation 5 Storage test 6 Drop test of packed motor 7 Heat shock test -40[] , 70[] each 2[hr] 5 cycle 8 Continuous use Continuous operation shall be performed 3000[h] under the rated voltage and rated load. 9 Interrupted Continuous use Specifications Rated value described in sections 1 to 7 shall be satisfied. (Specification for Characteristics) 1.2 [m] The switching operation (10[sec] on and 30[sec] off) shall be performed 300,000times under the environmental conditions above within the rated values described in sections 1 to 7 (Specification for Characteristics) - 10 -