TNPW060310K7BECN - Vishay

TNPW

www.vishay.com Vishay

Revision: 24-Jan-14 1Document Number: 31006

For technical questions, contact: thinfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Lead (Pb)-Bearing High Stability Thin Film Chip Resistors

TNPW High Stability Thin Film Chip Resistors are the perfect

choice for most fields of modern electronics where lead

(Pb)-bearing terminations are mandatory and reliability and

stability are of major concern.

FEATURES

• Metal film layer on high quality ceramic

• SnPb termination plating, Pb content > 6 %

• Excellent overall stability at different environmental

conditions  0.05 % (1000 h rated power at 70 °C)

• Low temperature coefficient and tight tolerances (± 0.1 %;

± 10 ppm/K)

• Single lot date code available

APPLICATIONS

• Military

•Avionics

• Industrial

Notes

(1) The detail specification EN140401-801 does not cover this product size.

(2) Rated voltage . The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat

flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not

exceeded.

(3) Measuring conditions in accordance with EN 140401-801.

TECHNICAL SPECIFICATIONS

DESCRIPTION TNPW0402 TNPW0603 TNPW0805 TNPW1206 TNPW1210 (1)

Imperial size 0402 0603 0805 1206 1210

Metric size code RR1005M RR1608M RR2012M RR3216M RR3225M

Resistance range 10  to 100 k10  to 332 k10  to 1 M10  to 2 M10  to 3.01 M

Resistance tolerance ± 1 %; ± 0.5 %; ± 0.1 %

Temperature coefficient ± 50 ppm/K; ± 25 ppm/K; ± 15 ppm/K; ± 10 ppm/K

Climatic category (LCT/UCT/days) 55/125/56 55/125/56 55/125/56 55/125/56 55/125/56

Rated dissipation, P70 (2) 0.063 W 0.1 W 0.125 W 0.25 W 0.33 W

Operating voltage, Umax. ACRMS or DC 50 V 75 V 150 V 200 V 200 V

Permissible film temperature,



F max. 155 °C

Operating Temperature Range -55 °C to 125 °C (155 °C)

Thermal resistance (3) 870 K/W 550 K/W 440 K/W 220 K/W 170 K/W

Insulation voltage:

Uins 1 min 75 V 100 V 200 V 300 V 300 V

Continuous 75 V 75 V 75 V 75 V 75 V

Failure rate: FITobserved  0.3 x 10-9/h

P x R

TNPW

www.vishay.com Vishay

Revision: 24-Jan-14 2Document Number: 31006

For technical questions, contact: thinfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

• The products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER.

TEMPERATURE COEFFICIENT AND RESISTANCE RANGE

TYPE TCR TOLERANCE RESISTANCE E-SERIES

TNPW0402

±50 ppm/K ± 1 % 10  to 100 kE24; E96

±25 ppm/K ± 0.5 %

E24; E192

± 0.1 %

47  to 100 k±15 ppm/K ± 0.1 %

±10 ppm/K ± 0.1 %

TNPW0603

±50 ppm/K ± 1 %

10  to 332 k

E24; E96

±25 ppm/K ± 0.5 %

E24; E192

± 0.1 %

±15 ppm/K ± 0.1 % 47  to 332 k

±10 ppm/K ± 0.1 %

TNPW0805

±50 ppm/K ± 1 %

10  to 1.0 M

E24; E96

±25 ppm/K ± 0.5 %

E24; E192

± 0.1 %

±15 ppm/K ± 0.1 % 47  to 1.0 M

±10 ppm/K ± 0.1 %

TNPW1206

±50 ppm/K ± 1 %

10  to 2.0 M

E24; E96

±25 ppm/K ± 0.5 %

E24; E192

± 0.1 %

±15 ppm/K ± 0.1 % 47  to 2.0 M

±10 ppm/K ± 0.1 %

TNPW1210

±50 ppm/K ± 1 % 10  to 3.01 M E24; E96

±25 ppm/K ± 0.5 %

E24; E192

± 0.1 %

47  to 2.13 M±15 ppm/K ± 0.1 %

±10 ppm/K ± 0.1 %

PART NUMBER AND PRODUCT DESCRIPTION

Part Number: TNPW12061K32DETA

TYPE/SIZE RESISTANCE TOLERANCE TCR PACKAGING SPECIAL

TNPW0402

TNPW0603

TNPW0805

TNPW1206

TNPW1210

R = Decimal

K = Thousand

M = Million

(4 digits)

B = ± 0.1 %

D = ± 0.5 %

F = ± 1.0 %

H = ± 50 ppm/K

E = ± 25 ppm/K

X = ± 15 ppm/K

Y = ± 10 ppm/K

Blank = Standard

0H = Single lot

date code

Product Description: TNPW-1206 1.32K 0.5 % T-9 RT1

TNPW-1206 1.32K 0.5 % T-9 RT1

TYPE/SIZE RESISTANCE TOLERANCE TCR PACKAGING SPECIAL

TNPW-0402

TNPW-0603

TNPW-0805

TNPW-1206

TNPW-1210

Examples:

1K32 = 1320 

99.68K = 99 680 

360 = 360 

± 0.1 %

± 0.5 %

± 1.0 %

T-2 = ± 50 ppm/K

T-9 = ± 25 ppm/K

T-10 = ± 15 ppm/K

T-13 = ± 10 ppm/K

TP1

RT7

R52

RT1

RT6

Blank = Standard

BV20545 =

Single lot date code

NPW12061KT2DETA3

TNPW

www.vishay.com Vishay

Revision: 24-Jan-14 3Document Number: 31006

For technical questions, contact: thinfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) 1000 pieces packaging quantity is only available for precision resistors with tolerance ± 0.1 %.

DESCRIPTION

The production is strictly controlled and follows an extensive

set of instructions established for reproducibility. A

homogeneous film of metal alloy is deposited on a high

grade ceramic body (Al2O3) and conditioned to achieve the

desired temperature coefficient. A special laser is used to

achieve the target value by smoothly cutting an appropriate

groove in the resistive layer without damaging the ceramics.

The resistor elements are covered by a protective coating

designed for electrical, mechanical and climatic protection.

The terminations receive a final tin-lead (SnPb) on nickel

plating. The result of the determined production is verified

by an extensive testing procedure performed on 100 % of

the individual resistors. Only accepted products are placed

into the tape in accordance with IEC 60286-3, Type I.

Resistance marking is not applied on TNPW0402.

ASSEMBLY

The resistors are suitable for processing on automatic SMD

assembly systems. They are suitable for automatic

soldering using wave, reflow or vapour phase as shown in

IEC 61760-1 (1). Solderability is specified for 2 years after

production. The permitted storage time is 20 years.

The terminations are plated with SnPb solder, controlled for

a minimum lead Pb content of 6 % for compliance with the

respective requirements of Bellcore, MIL and ESCC

specifications.

The encapsulation is resistant to all cleaning solvents

commonly used in the electronics industry, including

alcohols, esters and aqueous solutions.

The suitability of conformal coatings, if applied, shall be

qualified by appropriate means to ensure the long-term

stability of the whole system.

RELATED PRODUCTS

For ordering TNPW with lead free terminations please refer

to latest edition of data sheet TNPW e3,

(www.vishay.com/doc?28758).

TNPS .... ESCC high-reliability thin film chip resistors are the

premium choice for design and manufacture of equipment,

where mature technology and proven reliability are of

utmost importance.

(www.vishay.com/doc?28789)

PACKAGING

TYPE CODE QUANTITY PACKAGING

STYLE WIDTH PITCH REEL

DIAMETER

TNPW0402 TP1 = TP (1) 1000

Tape and reel

cardboard tape

acc. IEC 60286-3

Type I

8 mm 2 180 mm/7"

TNPW0402 RT7 = TD 10 000 8 mm 2 180 mm/7"

TNPW0603

TNPW0805

TNPW1206

TNPW1210

R52 = CN (1) 1000 8 mm 4 180 mm/7"

TNPW0603

TNPW0805

TNPW1206

TNPW1210

RT1 = TA 5000 8 mm 4 180 mm/7"

TNPW

www.vishay.com Vishay

Revision: 24-Jan-14 4Document Number: 31006

For technical questions, contact: thinfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Non-Linearity Current Noise

HF Performance HF Performance

120

110

100

6010 100 1K 10K 100K

Resistance Value in Ω

Non-Linearity A3 in dB

TNPW1206

TNPW0805

TNPW0603

TNPW0402

0.5

0.3

0.1

0.01

0.03

0.05

100 1K 10K 100K 1M

Resistance Value in Ω

Current Noise in µV/V

TNPW0402

TNPW0805

TNPW0603

TNPW1206

- 20

- 40

- 60

- 80

10 50 100 500

Frequency f in MHz

Phase Angle in ϑ°

TNPW0603

10 Ω

100 Ω

1 kΩ

4.75 kΩ

10 kΩ

1000

- 20

- 40

- 60

- 80

TNPW0603

10 50 100 500 1000

Frequency f in MHz

[Z]-RO in %

10 Ω

100 Ω

1 kΩ

4.75 kΩ

10 kΩ

- 20

- 40

- 60

- 80

Phase Angle in ϑ°

1 5 10 50 100 500

Frequency f in MHz

TNPW0805

10 Ω

100 Ω

1 kΩ

10 kΩ

1000

- 20

- 40

- 60

- 80

[Z]-RO in %

1510 50 100 500 1000

Frequency f in MHz

TNPW0805

10 Ω

100 Ω

1 kΩ

10 kΩ

TNPW

www.vishay.com Vishay

Revision: 24-Jan-14 5Document Number: 31006

For technical questions, contact: thinfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Derating Single-Pulse High Voltage Overload Test

1.2/50 μs EN 140000 4.27

Note

•The solid line is based on IEC/EN reference test conditions which 

is considered as standard mode. However, above that the 

maximum permissible film temperature is 155 °C (dashed line).

Single-Pulse High Voltage Overload Test

10/700 μs EN 140000 4.27

Single Pulse

Maximum pulse load, single pulse;

applicable if  0 and n  1000 and Û  Ûmax.;

for permissible resistance change equivalent to 8000 h

operation in standard operation mode

Maximum pulse load, continuous pulses;

applicable if  P (



amb) and Û  Ûmax.;

for permissible resistance change equivalent to 8000 h

operation in standard operation mode

Maximum pulse voltage, single and continuous pulses;

applicable if  max.;

for permissible resistance change equivalent to 8000 h

operation in standard operation mode

Continuous Pulse Pulse Voltage

120

100

- 55 - 25 0 25 50 75 100 125 150 175

Ambient Temperature in °C

Rated Power in %

100

10 10R 100R 1K 10K 100K

Resistance in Ω

Test Voltage in V

TNPW0805

TNPW0603

100

10R 100R 1K 10K 100K

Test Voltage in V

TNPW0805

TNPW0603

Resistance in Ω

100

0.1

0.01

10-5 10-4 10-3 10-2 10-1 110

TNPW0805

TNPW0603

Pulse Load

max.

Pulse Duration

100

0.1

0.0110-5 10-4 10-3 10-2 10-1 110

TNPW0805

TNPW0603

Continuous Pulse Load

max.

Pulse Duration

500

400

300

200

100

010-5 10-4 10-3 10-2 10-1 110

Secondary conditions:

a) Psee diagram (Pulse Rating)

b)ϑu ≤ 70 °C

TNPW0805

TNPW0603

Pulse Voltage

max.

Pulse Duration

TNPW

www.vishay.com Vishay

Revision: 24-Jan-14 6Document Number: 31006

For technical questions, contact: thinfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TEST AND REQUIREMENTS

All tests are carried out in accordance with the following

specifications:

IEC 60115-1, generic specification (includes tests)

EN 140400, sectional specification (includes schedule for

qualification approval)

EN 140401-801, detail specification (includes schedule for

conformance inspection)

The testing also covers most of the requirements specified

by EIA/ECA-703 and JIS-C-5201-1. The tests are carried out

under standard atmospheric conditions in accordance with

IEC 60068-1, 5.3. A climate category is applied, defined by

the lower category temperature (LCT), the upper category

temperature (UCT), and the number of days of the damp

heat, steady-state test (56).

Unless otherwise specified the following values apply:

Temperature: 15 °C to 35 °C

Relative humidity: 45 % to 75 %

Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).

The components are mounted for testing on boards in

accordance with EN60115-1, 4.31 unless otherwise

specified. The parameters stated in the Test Procedures and

Requirements table are based on the required tests and

permitted limits of EN140401-801.

TEST PROCEDURES AND REQUIREMENTS

EN 60115-1 

CLAUSE

IEC 60068-2

TEST

METHOD

TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (R)

Stability for

product type:

TNPW0402

TNPW0603

TNPW0805

TNPW1206

TNPW1210

10  to < 100 100  to 3.01 M10  to 3.01 M

4.5 - Resistance - ± 0.1 % ± 1 %; ± 0.5 %

4.8.4.2 - Temperature

coefficient

At (20/- 55/20) °C

and (20/125/20) °C ± 25 ppm/K; ± 15 ppm/K; ± 10 ppm/K ± 50 ppm/K;

± 25 ppm/K

4.25.1 -

Endurance

at 70 °C

U =

or  Umax.;

1.5 h on; 0.5 h off;

70 °C; 1000 h ± (0.1 % R + 0.02 ) ± (0.05 % R + 0.01 )± (0.25 % R + 0.05 )

4.25.3 -

Endurance

at upper

category

temperature

125 °C; 1000 h ± (0.1 % R + 0.02 ) ± (0.05 % R + 0.01 ) ± (0.5 % R + 0.05 )

4.13 - Short time

overload

U = 2.5 x

2 x Umax.; 2 s ± (0.05 % R + 0.01 ) ± (0.02 % R + 0.01 ) ± (0.1 % R + 0.02 )

4.24 78 (Cab) Damp heat,

steady state

(40 ± 2) °C;

(93 ± 3) % RH;

56 days

± (0.1 % R + 0.02 ) ± (0.05 % R + 0.01 ) ± (0.5 % R + 0.05 )

4.19 14 (Na) Rapid change

of temperature

30 min at - 55 °C:

30 min at 125 °C;

5 cycles

± (0.05 % R + 0.01 ) ± (0.02 % R + 0.01 ) ± (0.1 % R + 0.02 )

4.18.2 58 (Td) Resistance to

soldering heat

Solder bath method;

(260 ± 5) °C;

(10 ± 1) s

± (0.05 % R + 0.01 ) ± (0.02 % R + 0.01 ) ± (0.1 % R + 0.02 )

4.35 -

Flammability,

needle flame

test

IEC 60695-11-5;

10 s No burning after 30 s

P70 x R

TNPW

www.vishay.com Vishay

Revision: 24-Jan-14 7Document Number: 31006

For technical questions, contact: thinfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DIMENSIONS

SOLDER PAD DIMENSIONS

DIMENSIONS AND MASS

TYPE H

(mm)

MASS

(mg)

TNPW0402 0.35 ± 0.05 1.0 ± 0.05 0.5 ± 0.05 0.2 ± 0.10 0.2 ± 0.10 0.65

TNPW0603 0.45 ± 0.10 1.6 ± 0.10 0.85 ± 0.10 0.3 ± 0.20 0.3 ± 0.20 2

TNPW0805 0.45 ± 0.10 2.0 ± 0.15 1.25 ± 0.15 0.4 ± 0.20 0.4 ± 0.20 5.5

TNPW1206 0.55 ± 0.10 3.2 ± 0.15 1.6 ± 0.15 0.5 ± 0.25 0.5 ± 0.25 10

TNPW1210 0.60 ± 0.15 3.2 ± 0.15 2.45 ± 0.15 0.5 ± 0.25 0.5 ± 0.25 16

SOLDER PAD DIMENSIONS

TYPE

REFLOW SOLDERING WAVE SOLDERING

(mm)

TNPW0402 0.4 0.6 0.5 - - -

TNPW0603 0.5 0.9 1.0 0.9 0.9 1.0

TNPW0805 0.7 1.3 1.2 0.9 1.3 1.3

TNPW1206 0.9 1.7 2.0 1.1 1.7 2.3

TNPW1210 0.9 2.5 2.0 1.1 2.5 2.3

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Vishay:

TNPW04021K10DETD TNPW06032401BT TNPW04021003BT TNPW04024752BT TNPW0603140KBETA

TNPW08052492DT TNPW12061252BT TNPW060340R2DT TNPW08051402BT-T10 TNPW06037322DT

TNPW12066343FT TNPW06031650BR52 TNPW06031912BR52 TNPW06031023BR52 TNPW060316R2BR52

TNPW060310K7BECN TNPW04023122BT TNPW04027682BT TNPW08051052BT TNPW08055491BT

TNPW08057591BT TNPW12063092BT TNPW060326R1DT-T2 TNPW12062M00BECN TNPW08052672BT

TNPW06031603BR52 TNPW12105421BT TNPW12063742BT TNPW12064422BT TNPW12066572BT

TNPW06031152BT TNPW08058661BT TNPW04022871BT TNPW04021272BT TNPW06035761BT

TNPW080528K7BHTA TNPW12062001BT-T10 TNPW06031801BT TNPW080543R2DHBD TNPW080549R9BHBD

TNPW080549R9FHBD TNPW080551R1DHBD TNPW080583R5BHBD TNPW120615K0BYBD

TNPW12061K00FKBD TNPW12061M00BXBD TNPW1206205RBYBD TNPW120620K0BYBD TNPW120624K9BYBD

TNPW12062K49BXBD TNPW120639R2FHBD TNPW12063K74BYBD TNPW12064K87BXBD

TNPW120651R1BHBD TNPW120655R5BHBD TNPW1206590RBHBD TNPW120659R0BHBD

TNPW120660K4BYBD TNPW120660R4FHBD TNPW1206665RBYBD TNPW120668R1BHBD

TNPW120680R6BHBD TNPW120688K7BXBD TNPW1206909KBXBD TNPW1210200RBHBD

TNPW121047R5FHBD TNPW121090R9BHBD TNPW06033572BT TNPW08051373BT TNPW08052582BT

TNPW0603562RBECN TNPW08055100BT TNPW040210R0DT TNPW040259R0DT TNPW06031133BT

TNPW06031580BT TNPW06031820BT TNPW06032801BT TNPW06033570BT TNPW06036041BT

TNPW06038450BT TNPW06039312BT TNPW06036341BT TNPW06038661BT TNPW12062611BT

TNPW06031203BT TNPW06031143DT TNPW06032673DT TNPW06037962DT TNPW08051430BT

TNPW12061001BT-T13 TNPW1206332RBYCN TNPW06033243BT TNPW06036191BT TNPW06038061BT

TNPW08051383BT TNPW08053243BT TNPW06036812BT TNPW04021001BT TNPW04022001BT