3-11
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com
3
2mm
LED CBI®Circuit Board Indicator
(DIN 41494 Compatible), Tri-Level
570-0100-xxx
PART NO. COLOR*
570-0100-111 Red–Red–Red
570-0100-132 Red–Yellow–Green
570-0100-222 Green–Green–Green
570-0100-333 Yellow–Yellow–Yellow
* Top-Middle-Bottom LED
Features
• Designed to accommodate DIN 41494
• Multiple CBIs form horizontal LED arrays on 5.08mm
(0.200”) center-lines
• High Contrast, UL 94 V-0 rated, black housing
• Oxygen index: 29%
• Polymer content: PBT, 0.595 g
• Housing stand-offs facilitate PCB cleaning
• Solderability per MIL-STD-202F, method 208F
• LEDs are safe for direct viewing per IEC 825-1,
EN- 60825-1
Tolerance note: As noted, otherwise:
• LED Protrusion: ±0.04 mm [±0.016]
• CBI Housing: ±0.02mm[±0.008]
Dimensions in mm [inches]
570-0100-xxx
Top LED Color
Bottom LED
Color
Middle LED Color
Series
EXAMPLE OF PART NUMBER ORDERING CODE
LED colors: 0) Blank 1) Red 2) Green 3) Yellow
Peak I
V*
V
F**
Viewing LED
Part Number Color Wavelength nm mcd Volts Angle 2
ΘΘ1/2
Data sheet Page #
Red 635 12.6 2 38° 521-9630 3-13
570-0100-xxx Green 565 8.7 2.1 38° 521-9632 3-13
Yellow 585 12.6 2.1 38° 521-9631 3-13
Custom Combinations
• Contact factory for information on custom color
combinations.
* IF= 10 mA **IF= 20 mA
Typical Operating Characteristics (TA= 25°C)
See LED data sheet for additional information
GENERAL PURPOSE
See Page 3-17 and 3-18 for Reference Only LED Drive Circuit Examples
See Page 3-19 for Pin Out